- 21 Jun, 2021 6 commits
-
-
Bart Van Assche authored
Document the locking strategy by adding two lockdep_assert_held() statements. Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-7-bvanassche@acm.orgSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Bart Van Assche authored
Make the code easier to read by adding more comments. Reviewed-by:
-
Bart Van Assche authored
Introduce an rq-qos policy that assigns an I/O priority to requests based on blk-cgroup configuration settings. This policy has the following advantages over the ioprio_set() system call: - This policy is cgroup based so it has all the advantages of cgroups. - While ioprio_set() does not affect page cache writeback I/O, this rq-qos controller affects page cache writeback I/O for filesystems that support assiociating a cgroup with writeback I/O. See also Documentation/admin-guide/cgroup-v2.rst. Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
-
Bart Van Assche authored
rq_qos_id_to_name() is only used in blk-mq-debugfs.c so move that function into in blk-mq-debugfs.c. Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
-
Bart Van Assche authored
Before adding more calls in this function, simplify the error path. Reviewed-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20210618004456.7280-3-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
These entries were consecutive at the time of their introduction but are no longer consecutive. Make these again consecutive. Additionally, modify the help text since it refers to blk-mq and since the legacy block layer has been removed. Reviewed-by:
-
- 18 Jun, 2021 4 commits
-
-
lijiazi authored
Now wbt_wait() returns void, so remove now outdated comment. Signed-off-by:
lijiazi <lijiazi@xiaomi.com> Link: https://lore.kernel.org/r/1623986240-13878-1-git-send-email-lijiazi@xiaomi.comSigned-off-by:
-
Dan Carpenter authored
The __blk_mq_alloc_disk() function doesn't return NULLs it returns error pointers. Fixes: b461dfc4 ("blk-mq: add the blk_mq_alloc_disk APIs") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/YMyjci35WBqrtqG+@mwandaSigned-off-by:
-
Damien Le Moal authored
The insert_requests and dispatch_request elevator operations are mandatory for the correct execution of an elevator, and all implemented elevators (bfq, kyber and mq-deadline) implement them. As a result, there is no need to check for these operations before calling them when a queue has an elevator set. This simplifies the code in __blk_mq_sched_dispatch_requests() and blk_mq_sched_insert_request(). To avoid out-of-tree elevators to crash the kernel in case of bad implementation, add a check in elv_register() to verify that these operations are implemented. A small, probably not significant, IOPS improvement of 0.1% is observed with this patch applied (4.117 MIOPS to 4.123 MIOPS, average of 20 fio runs doing 4K random direct reads with psync and 32 jobs). Signed-off-by:
-
Ming Lei authored
tagset can't be used after blk_cleanup_queue() is returned because freeing tagset usually follows blk_clenup_queue(). Commit d97e594c ("blk-mq: Use request queue-wide tags for tagset-wide sbitmap") adds check on q->tag_set->flags in blk_mq_exit_sched(), and causes use-after-free. Fixes it by using hctx->flags. Reported-by: syzbot+77ba3d171a25c56756ea@syzkaller.appspotmail.com Fixes: d97e594c ("blk-mq: Use request queue-wide tags for tagset-wide sbitmap") Cc: John Garry <john.garry@huawei.com> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Tested-by:
John Garry <john.garry@huawei.com> Reviewed-by:
-
- 16 Jun, 2021 7 commits
-
-
Kir Kolyshkin authored
Commit bf382fb0bcef4 ("block: remove legacy IO schedulers", Oct 12 2018) removes the CFQ scheduler, together with blkio.weight and blkio.weight_device described in cgroup v1 documentation. Users are supposed to use the BFQ scheduler, which cgroup file for setting weight is blkio.bfq.weight, but there is no way to set per-device weight. Later, commit 795fe54c per-device weights for BFQ, meaning that blkio.bfq.weight and blkio.bfq.weight_device can be used in a way similar to the old CFQ cgroup interface. Yet, the cgroup v1 docs were never updated. Fix this: - use the new file names; - fix the range for weight (used to be 10..1000, now 1..1000); - link to BFQ scheduler docs. Acked-by:Kir Kolyshkin <kolyshkin@gmail.com> Signed-off-by:
-
Kir Kolyshkin authored
Fix many formatting issues by stop (ab)using itemized lists for everything (mostly replaced by definition lists). Acked-by:
-
Kir Kolyshkin authored
The functionality of setting per-device weight for BFQ was added in v5.4 (commit 795fe54c), but the documentation was never updated. While at it, improve formatting a bit. Signed-off-by:
-
Ming Lei authored
Mark queue init done when everything is done well in blk_register_queue(), so that wbt_enable_default() can be run quickly without any RCU period involved since adding rq qos requires to freeze queue. Also no any side effect by delaying to mark queue init done. Reported-by:
Yi Zhang <yi.zhang@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Ming Lei authored
Yi reported several kernel panics on: [16687.001777] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... [16687.163549] pc : __rq_qos_track+0x38/0x60 or [ 997.690455] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... [ 997.850347] pc : __rq_qos_done+0x2c/0x50 Turns out it is caused by race between adding rq qos(wbt) and normal IO because rq_qos_add can be run when IO is being submitted, fix this issue by freezing queue before adding/deleting rq qos to queue. rq_qos_exit() needn't to freeze queue because it is called after queue has been frozen. iolatency calls rq_qos_add() during allocating queue, so freezing won't add delay because queue usage refcount works at atomic mode at that time. iocost calls rq_qos_add() when writing cgroup attribute file, that is fine to freeze queue at that time since we usually freeze queue when storing to queue sysfs attribute, meantime iocost only exists on the root cgroup. wbt_init calls it in blk_register_queue() and queue sysfs attribute store(queue_wb_lat_store() when write it 1st time in case of !BLK_WBT_MQ), the following patch will speedup the queue freezing in wbt_init. Reported-by:
-
Christoph Hellwig authored
We must release the queue before freeing the tagset. Fixes: 1c99502f ("loop: use blk_mq_alloc_disk and blk_cleanup_disk") Reported-by:
Bruno Goncalves <bgoncalv@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
Various places expect the request_queue in ->rq. Initialize it to avoid NULL pointer derefences. Fixes: 6966bb92 ("mtd_blkdevs: use blk_mq_alloc_disk") Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
- 11 Jun, 2021 23 commits
-
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by:
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
Jack Wang <jinpu.wang@ionos.com> Reviewed-by:
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
All users are gone now. Signed-off-by:
-
Christoph Hellwig authored
Use the blk_mq_alloc_disk API to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use the blk_mq_alloc_disk API to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use the blk_mq_alloc_disk API to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use the blk_mq_alloc_disk API to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use the blk_mq_alloc_disk API to simplify the gendisk and request_queue allocation. Signed-off-by:
Geoff Levand <geoff@infradead.org> Reviewed-by:
-
Christoph Hellwig authored
Use the blk_mq_alloc_disk API to simplify the gendisk and request_queue allocation. Signed-off-by:
-
Christoph Hellwig authored
Use the blk_mq_alloc_disk API to simplify the gendisk and request_queue allocation. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by:
-
