1. 11 Jan, 2017 3 commits
    • Tobias Klauser's avatar
      bpf: Make unnecessarily global functions static · 3bf00333
      Tobias Klauser authored
      Make the functions __local_list_pop_free(), __local_list_pop_pending(),
      bpf_common_lru_populate() and bpf_percpu_lru_populate() static as they
      are not used outide of bpf_lru_list.c
      
      This fixes the following GCC warnings when building with 'W=1':
      
        kernel/bpf/bpf_lru_list.c:363:22: warning: no previous prototype for ‘__local_list_pop_free’ [-Wmissing-prototypes]
        kernel/bpf/bpf_lru_list.c:376:22: warning: no previous prototype for ‘__local_list_pop_pending’ [-Wmissing-prototypes]
        kernel/bpf/bpf_lru_list.c:560:6: warning: no previous prototype for ‘bpf_common_lru_populate’ [-Wmissing-prototypes]
        kernel/bpf/bpf_lru_list.c:577:6: warning: no previous prototype for ‘bpf_percpu_lru_populate’ [-Wmissing-prototypes]
      
      Cc: Martin KaFai Lau <kafai@fb.com>
      Signed-off-by: default avatarTobias Klauser <tklauser@distanz.ch>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Acked-by: default avatarMartin KaFai Lau <kafai@fb.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3bf00333
    • Tobias Klauser's avatar
      bpf: Remove unused but set variable in __bpf_lru_list_shrink_inactive() · a5ef01aa
      Tobias Klauser authored
      Remove the unused but set variable 'first_node' in
      __bpf_lru_list_shrink_inactive() to fix the following GCC warning when
      building with 'W=1':
      
        kernel/bpf/bpf_lru_list.c:216:41: warning: variable ‘first_node’ set but not used [-Wunused-but-set-variable]
      
      Cc: Martin KaFai Lau <kafai@fb.com>
      Signed-off-by: default avatarTobias Klauser <tklauser@distanz.ch>
      Acked-by: default avatarMartin KaFai Lau <kafai@fb.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a5ef01aa
    • Mahesh Bandewar's avatar
      ipvlan: improvise dev_id generation logic in IPvlan · da36e13c
      Mahesh Bandewar authored
      The patch 009146d1 ("ipvlan: assign unique dev-id for each slave
      device.") used ida_simple_get() to generate dev_ids assigned to the
      slave devices. However (Eric has pointed out that) there is a shortcoming
      with that approach as it always uses the first available ID. This
      becomes a problem when a slave gets deleted and a new slave gets added.
      The ID gets reassigned causing the new slave to get the same link-local
      address. This side-effect is undesirable.
      
      This patch adds a per-port variable that keeps track of the IDs
      assigned and used as the stat-base for the IDR api. This base will be
      wrapped around when it reaches the MAX (0xFFFE) value possibly on a
      busy system where slaves are added and deleted routinely.
      
      Fixes: 009146d1 ("ipvlan: assign unique dev-id for each slave device.")
      Signed-off-by: default avatarMahesh Bandewar <maheshb@google.com>
      CC: Eric Dumazet <edumazet@google.com>
      CC: David Miller <davem@davemloft.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      da36e13c
  2. 10 Jan, 2017 6 commits
  3. 09 Jan, 2017 31 commits
    • Vivien Didelot's avatar
      net: dsa: select NET_SWITCHDEV · 3a89eaa6
      Vivien Didelot authored
      The support for DSA Ethernet switch chips depends on TCP/IP networking,
      thus explicit that HAVE_NET_DSA depends on INET.
      
      DSA uses SWITCHDEV, thus select it instead of depending on it.
      Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Tested-by: default avatarRandy Dunlap <rdunlap@infradead.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3a89eaa6
    • David S. Miller's avatar
      Merge tag 'mlx5-4kuar-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux · bda65b42
      David S. Miller authored
      Saeed Mahameed says:
      
      ====================
      mlx5 4K UAR
      
      The following series of patches optimizes the usage of the UAR area which is
      contained within the BAR 0-1. Previous versions of the firmware and the driver
      assumed each system page contains a single UAR. This patch set will query the
      firmware for a new capability that if published, means that the firmware can
      support UARs of fixed 4K regardless of system page size. In the case of
      powerpc, where page size equals 64KB, this means we can utilize 16 UARs per
      system page. Since user space processes by default consume eight UARs per
      context this means that with this change a process will need a single system
      page to fulfill that requirement and in fact make use of more UARs which is
      better in terms of performance.
      
      In addition to optimizing user-space processes, we introduce an allocator
      that can be used by kernel consumers to allocate blue flame registers
      (which are areas within a UAR that are used to write doorbells). This provides
      further optimization on using the UAR area since the Ethernet driver makes
      use of a single blue flame register per system page and now it will use two
      blue flame registers per 4K.
      
      The series also makes changes to naming conventions and now the terms used in
      the driver code match the terms used in the PRM (programmers reference manual).
      Thus, what used to be called UUAR (micro UAR) is now called BFREG (blue flame
      register).
      
      In order to support compatibility between different versions of
      library/driver/firmware, the library has now means to notify the kernel driver
      that it supports the new scheme and the kernel can notify the library if it
      supports this extension. So mixed versions of libraries can run concurrently
      without any issues.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bda65b42
    • Eric Dumazet's avatar
      tcp: make TCP_INFO more consistent · b369e7fd
      Eric Dumazet authored
      tcp_get_info() has to lock the socket, so lets lock it
      for an extended critical section, so that various fields
      have consistent values.
      
      This solves an annoying issue that some applications
      reported when multiple counters are updated during one
      particular rx/rx event, and TCP_INFO was called from
      another cpu.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: Yuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b369e7fd
    • David S. Miller's avatar
      Merge branch 'bpf-verifier-improvements' · c22e5c12
      David S. Miller authored
      Alexei Starovoitov says:
      
      ====================
      bpf: verifier improvements
      
      A number of bpf verifier improvements from Gianluca.
      See individual patches for details.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c22e5c12
    • Alexei Starovoitov's avatar
      bpf: rename ARG_PTR_TO_STACK · 39f19ebb
      Alexei Starovoitov authored
      since ARG_PTR_TO_STACK is no longer just pointer to stack
      rename it to ARG_PTR_TO_MEM and adjust comment.
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      39f19ebb
    • Gianluca Borello's avatar
      bpf: allow helpers access to variable memory · 06c1c049
      Gianluca Borello authored
      Currently, helpers that read and write from/to the stack can do so using
      a pair of arguments of type ARG_PTR_TO_STACK and ARG_CONST_STACK_SIZE.
      ARG_CONST_STACK_SIZE accepts a constant register of type CONST_IMM, so
      that the verifier can safely check the memory access. However, requiring
      the argument to be a constant can be limiting in some circumstances.
      
      Since the current logic keeps track of the minimum and maximum value of
      a register throughout the simulated execution, ARG_CONST_STACK_SIZE can
      be changed to also accept an UNKNOWN_VALUE register in case its
      boundaries have been set and the range doesn't cause invalid memory
      accesses.
      
      One common situation when this is useful:
      
      int len;
      char buf[BUFSIZE]; /* BUFSIZE is 128 */
      
      if (some_condition)
      	len = 42;
      else
      	len = 84;
      
      some_helper(..., buf, len & (BUFSIZE - 1));
      
      The compiler can often decide to assign the constant values 42 or 48
      into a variable on the stack, instead of keeping it in a register. When
      the variable is then read back from stack into the register in order to
      be passed to the helper, the verifier will not be able to recognize the
      register as constant (the verifier is not currently tracking all
      constant writes into memory), and the program won't be valid.
      
      However, by allowing the helper to accept an UNKNOWN_VALUE register,
      this program will work because the bitwise AND operation will set the
      range of possible values for the UNKNOWN_VALUE register to [0, BUFSIZE),
      so the verifier can guarantee the helper call will be safe (assuming the
      argument is of type ARG_CONST_STACK_SIZE_OR_ZERO, otherwise one more
      check against 0 would be needed). Custom ranges can be set not only with
      ALU operations, but also by explicitly comparing the UNKNOWN_VALUE
      register with constants.
      
      Another very common example happens when intercepting system call
      arguments and accessing user-provided data of variable size using
      bpf_probe_read(). One can load at runtime the user-provided length in an
      UNKNOWN_VALUE register, and then read that exact amount of data up to a
      compile-time determined limit in order to fit into the proper local
      storage allocated on the stack, without having to guess a suboptimal
      access size at compile time.
      
      Also, in case the helpers accepting the UNKNOWN_VALUE register operate
      in raw mode, disable the raw mode so that the program is required to
      initialize all memory, since there is no guarantee the helper will fill
      it completely, leaving possibilities for data leak (just relevant when
      the memory used by the helper is the stack, not when using a pointer to
      map element value or packet). In other words, ARG_PTR_TO_RAW_STACK will
      be treated as ARG_PTR_TO_STACK.
      Signed-off-by: default avatarGianluca Borello <g.borello@gmail.com>
      Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      06c1c049
    • Gianluca Borello's avatar
      bpf: allow adjusted map element values to spill · f0318d01
      Gianluca Borello authored
      commit 48461135 ("bpf: allow access into map value arrays")
      introduces the ability to do pointer math inside a map element value via
      the PTR_TO_MAP_VALUE_ADJ register type.
      
      The current support doesn't handle the case where a PTR_TO_MAP_VALUE_ADJ
      is spilled into the stack, limiting several use cases, especially when
      generating bpf code from a compiler.
      
      Handle this case by explicitly enabling the register type
      PTR_TO_MAP_VALUE_ADJ to be spilled. Also, make sure that min_value and
      max_value are reset just for BPF_LDX operations that don't result in a
      restore of a spilled register from stack.
      Signed-off-by: default avatarGianluca Borello <g.borello@gmail.com>
      Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f0318d01
    • Gianluca Borello's avatar
      bpf: allow helpers access to map element values · 5722569b
      Gianluca Borello authored
      Enable helpers to directly access a map element value by passing a
      register type PTR_TO_MAP_VALUE (or PTR_TO_MAP_VALUE_ADJ) to helper
      arguments ARG_PTR_TO_STACK or ARG_PTR_TO_RAW_STACK.
      
      This enables several use cases. For example, a typical tracing program
      might want to capture pathnames passed to sys_open() with:
      
      struct trace_data {
      	char pathname[PATHLEN];
      };
      
      SEC("kprobe/sys_open")
      void bpf_sys_open(struct pt_regs *ctx)
      {
      	struct trace_data data;
      	bpf_probe_read(data.pathname, sizeof(data.pathname), ctx->di);
      
      	/* consume data.pathname, for example via
      	 * bpf_trace_printk() or bpf_perf_event_output()
      	 */
      }
      
      Such a program could easily hit the stack limit in case PATHLEN needs to
      be large or more local variables need to exist, both of which are quite
      common scenarios. Allowing direct helper access to map element values,
      one could do:
      
      struct bpf_map_def SEC("maps") scratch_map = {
      	.type = BPF_MAP_TYPE_PERCPU_ARRAY,
      	.key_size = sizeof(u32),
      	.value_size = sizeof(struct trace_data),
      	.max_entries = 1,
      };
      
      SEC("kprobe/sys_open")
      int bpf_sys_open(struct pt_regs *ctx)
      {
      	int id = 0;
      	struct trace_data *p = bpf_map_lookup_elem(&scratch_map, &id);
      	if (!p)
      		return;
      	bpf_probe_read(p->pathname, sizeof(p->pathname), ctx->di);
      
      	/* consume p->pathname, for example via
      	 * bpf_trace_printk() or bpf_perf_event_output()
      	 */
      }
      
      And wouldn't risk exhausting the stack.
      
      Code changes are loosely modeled after commit 6841de8b ("bpf: allow
      helpers access the packet directly"). Unlike with PTR_TO_PACKET, these
      changes just work with ARG_PTR_TO_STACK and ARG_PTR_TO_RAW_STACK (not
      ARG_PTR_TO_MAP_KEY, ARG_PTR_TO_MAP_VALUE, ...): adding those would be
      trivial, but since there is not currently a use case for that, it's
      reasonable to limit the set of changes.
      
      Also, add new tests to make sure accesses to map element values from
      helpers never go out of boundary, even when adjusted.
      Signed-off-by: default avatarGianluca Borello <g.borello@gmail.com>
      Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5722569b
    • Gianluca Borello's avatar
      bpf: split check_mem_access logic for map values · dbcfe5f7
      Gianluca Borello authored
      Move the logic to check memory accesses to a PTR_TO_MAP_VALUE_ADJ from
      check_mem_access() to a separate helper check_map_access_adj(). This
      enables to use those checks in other parts of the verifier as well,
      where boundaries on PTR_TO_MAP_VALUE_ADJ might need to be checked, for
      example when checking helper function arguments. The same thing is
      already happening for other types such as PTR_TO_PACKET and its
      check_packet_access() helper.
      
      The code has been copied verbatim, with the only difference of removing
      the "off += reg->max_value" statement and moving the sum into the call
      statement to check_map_access(), as that was only needed due to the
      earlier common check_map_access() call.
      Signed-off-by: default avatarGianluca Borello <g.borello@gmail.com>
      Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dbcfe5f7
    • David S. Miller's avatar
      Merge branch 'net-smc' · f3a3e248
      David S. Miller authored
      Ursula Braun says:
      
      ====================
      net/smc: Shared Memory Communications - RDMA
      
      here is now V4 of the SMC-R patches having processed your feedback from end
      of November. The most important change is the replacement of sysfs by a
      generic netlink solution in patch 04. And I tried to get rid of the __packed
      attributes. There are still a few usages left due to SMC-R protocol defined
      structures.
      
      V4 changes:
      The order of patches 03 and 04 for pnet table management and SMC IB-client
      establishing has been exchanged, since pnet table management is now built on
      top of smc_ib_devices.
      Patch 01: Use EXPORT_SYMBOL_GPL().
      Patch 02: Define "use_fallback" as bool.
                Get rid of useless smc_sock fields clearing in smc_sock_alloc(),
                since sk_alloc() clears out the memory.
      Patch 03: Postpone smc_ib_remember_port_attr() call till ib_device is
                mentioned in the pnet table.
      Patch 04: Replace sysfs-usage by a generic netlink approach for pnet table
                configuration.
                Change layout of pnet table entries to reference net_device and
                ib_device instead of dealing with names of net_devices and
                ib_devices.
      Patch 05: Adapt "use_fallback" usages to new type bool.
                Get rid of useless smc_sock fields clearing in smc_sock_alloc()
                Avoid __packed where possible.
                Check if clc responses are not too big.
      Patch 09: Postpone smc_setup_per_ibdev till the first connection with this
                ib_device is really created.
      Patch 11: Get rid of __packed usage.
      
      V3 changes:
      Patch 05: Remove unneeded DEFINE_WAIT
      Patch 06: Improve synchronization of link group creation
      Patch 07: Rename peer_rmbe_len into peer_rmbe_size to be more consistent
      Patch 09: Avoid calls of ib_get_memory_region with IB_ACCESS_LOCAL_WRITE,
                use new default local_dma_lkey from protection domain as lkey
                instead.
                Remove no longer needed function smc_ib_dereg_memory_region().
      Patch 14: Switch to state ACTIVE only if still in state INIT.
                Return 0 for recvmsg invoked in a socket closing state.
                Allow getname call in state APPCLOSEWAIT1
                Do not trigger destruction of a socket-in-error queued in accept
                queue.
                During cleanup of accept queue, make sure sockets are destructed,
                and sockets in fallback mode are handled appropriately.
                When freeing sndbufs/rmbs, remove them from their list and free
                the entry.
                Use add_wait_queue() and remove_wait_queue() in close wait
                functions.
                If actively closing a socket in state for PEERFINCLOSEWAIT, keep
                this state.
                If passively closing a socket while bytes are to be received, move
                to state APPCLOSEWAIT1.
                If actively aborting a socket, skip sending the close_abort flag,
                since RDMA communication is no longer possible.
                When terminating a link group, do not schedule link group freeing a
                2nd time, since already done when unregistering the last remaining
                connection.
      Patch 15: Introduce smc_diag module for monitoring SMC protocol sockets.
                This replaces the old patch 0015 dealing with procfs.
      
      V2 changes:
      Patch 0002: Add SMC versions for family key strings in net/core/sock.c.
      Patch 0006: initialize rb_tree.
      Patch 0007: Get rid of unneeded use of xchg() in smc_sndbuf_unuse() and
                  smc_rmb_unuse().
      Patch 0008: Correct error checking logic for ib_function calls.
                  Define struct smc_link field wr_tx_id as atomic_long_t.
                  Use "do_div" instead of "%" to be architecture-independent.
      Patch 0009: Correct error checking logic for ib_function calls.
      Patch 0011: Remove xchg() calls in cursor handling. Use atomic64_t for cursor
                  overlays on 64-bit architectures. If not available, use plain u64
                  and add locking for cursor reading and writing.
                  Implement smc_curs_add() without modulo operator "%".
      Patch 0012: Remove xchg() calls in cursor handling.
                  Implement smc_tx_rdma_writes() without module operator "%".
      Patch 0013: Remove xchg() calls in cursor handling.
      Patch 0014: Return type bool in smc_wr_tx_has_pending().
                  Remove unneeded semicolon in smc_close_shutdown_write().
                  Call smc_close_active() in non-fallback case only.
                  Get rid of duplicate schedule of sock_put_work().
                  Take nested sock_lock in smc_listen_work().
                  Start close stream_wait in case of prepared sends only.
      Patch 0015: Remove unneeded socket ref_count in smc_proc_seq_show().
                  Take lock before list_empty check in smc_proc_sock_list_del().
      
      These patches are the initial part of the implementation of the
      "Shared Memory Communications-RDMA" (SMC-R) protocol as defined in
      RFC7609 [1]. While SMC-R does not aim to replace TCP,
      it taps a wealth of existing data center TCP socket applications
      to become more efficient without the need for rewriting them.
      SMC-R uses RDMA over Converged Ethernet (RoCE) to save CPU consumption.
      For instance, when running 10 parallel connections with uperf, we measured
      a decrease of 60% in CPU consumption with SMC-R compared to TCP/IP
      (with throughput and latency comparable;
      measured on x86_64 with the same RoCE card and port).
      
      SMC-R does not require an RDMA communication manager (RDMA CM).
      
      SMC-R inherits TCP qualities such as reliable connections, host-based
      firewall packet filtering (on connection establishment) and unmodified
      application of communication encryption such as TLS (transport layer
      security) or SSL (secure sockets layer). Since original TCP is used to
      establish SMC-R connections, load balancers and packet inspection based
      on TCP/IP connection establishment continue to work for SMC-R.
      
      On the other hand, using SMC-R implies:
      - either involving a preload library when invoking the unchanged TCP-application
        or slightly modifying the source by simply changing the socket family in
        the socket() call
      - accepting extra overhead and latency in connection establishment due to
        SMC Connection Layer Control (CLC) handshake
      - explicit coupling of RoCE ports with Ethernet ports
      - not routable as currently built on RoCE V1
      - bypassing of packet-based networking features
          - filtering (netfilter)
          - sniffing (libpcap, packet sockets, (E)BPF)
          - traffic control (scheduling, shaping)
      - bypassing of IP-header based socket options
      - bypassing of memory buffer (pressure) management
      - unusable together with IPsec
      
      Overview of the SMC-R Protocol described in informational RFC 7609
      
      SMC-R is an open protocol that provides RDMA capabilities over RoCE
      transparently for applications exploiting TCP sockets.
      A new socket protocol family PF_SMC is introduced.
      There are no changes required to applications using the sockets API for TCP
      stream sockets other than the specification of the new socket family AF_SMC.
      Unmodified applications can be used by means of a dynamic preload shared
      library which rewrites the socket API call
      socket(AF_INET, SOCK_STREAM, IPPROTO_TCP) into
      socket(AF_SMC,  SOCK_STREAM, IPPROTO_TCP).
      SMC-R re-uses the address family AF_INET for all addressing purposes around
      struct sockaddr.
      
      SMC-R system architecture layers:
      
      +=============================================================================+
      |                                      | unmodified TCP application           |
      | native SMC application               +--------------------------------------+
      |                                      | dynamic preload shared library       |
      +=============================================================================+
      |                                 SMC socket                                  |
      +-----------------------------------------------------------------------------+
      |                    | TCP socket (for connection establishment and fallback) |
      | IB verbs           +--------------------------------------------------------+
      |                    | IP                                                     |
      +--------------------+--------------------------------------------------------+
      | RoCE device driver | some network device driver                             |
      +=============================================================================+
      
      Terms:
      
      A link group is determined by an ordered peer pair of TCP client and TCP server
      (IP addresses and subnet). Reversed client server roles cause an own link group.
      A link is a logical point-to-point connection based on an
      infiniband reliable connected queue pair (RC-QP) between two RoCE ports
      (MACs and GIDs) of a peer pair.
      A link group can have 1..8 links for failover and load balancing.
      This initial Linux implementation always has 1 link per link group.
      Each link group on a peer can have 1..255 remote memory buffers (RMBs).
      If more RMBs are needed, a peer can open another link group
      (this initial Linux implementation) or fall back to TCP.
      Each RMB has its own particular size and its own (R)DMA mapping and credentials
      (rtoken consisting of rkey and RDMA "virtual address").
      This initial Linux implementation uses physically contiguous memory for RMBs
      but we are working towards scattered memory because of memory fragmentation.
      Each RMB has 1..255 RMB elements (RMBEs) of equal size
      to provide multiplexing of connections within an RMB.
      An RMBE is the RDMA Write destination organized as wrapping ring buffer
      for data transmit of a particular connection in one direction
      (duplex by means of mirror symmetry as with TCP).
      This initial Linux implementation always has 1 RMBE per RMB
      and thus an individual RMB for each connection.
      
      SMC-R connection establishment with subsequent data transfer:
      
         CLIENT                                                   SERVER
      
      TCP three-way handshake:
                               regular TCP SYN
            -------------------------------------------------------->
                             regular TCP SYN ACK
            <--------------------------------------------------------
                               regular TCP ACK
            -------------------------------------------------------->
      
      SMC Connection Layer Control (CLC) handshake
      exchanges RDMA credentials between peers:
                   via above TCP connection: SMC CLC Proposal
            -------------------------------------------------------->
                    via above TCP connection: SMC CLC Accept
            <--------------------------------------------------------
                   via above TCP connection: SMC CLC Confirm
            -------------------------------------------------------->
      
      SMC Link Layer Control (LLC) (only once per link, i.e. 1st conn. of link group):
                       RoCE RC-QP: SMC LLC Confirm Link
            <========================================================
                   RoCE RC-QP: SMC LLC Confirm Link response
            ========================================================>
      
      SMC data transmission (incl. SMC Connection Data Control (CDC) message):
                             RoCE RC-QP: RDMA Write
            ========================================================>
                   RoCE RC-QP: SMC CDC message (flow control)
            ========================================================>
                                ...
      
                             RoCE RC-QP: RDMA Write
            <========================================================
                   RoCE RC-QP: SMC CDC message (flow control)
            <========================================================
                                ...
      
      Data flow within an established connection:
      
      +----------------------------------------------------------------------------
      |            SENDER
      | sendmsg()
      |    |
      |    | produces into sndbuf [sender's process context]
      |    v
      | +--------+
      | | sndbuf | [ring buffer]
      | +--------+
      |    |
      |    | consumes from sndbuf and produces into receiver's RMBE [any context]
      |    | by sending RDMA Write followed by SMC CDC message over RoCE RC-QP
      |    |
      +----|-----------------------------------------------------------------------
           |
      +----|-----------------------------------------------------------------------
      |    v       RECEIVER
      | +------+
      | | RMBE | [ring buffer, can have size different from sender's sndbuf]
      | |      | [RMBE represents rcvbuf, no further de-coupling as on sender side]
      | +------+
      |    |
      |    | consumes from RMBE [receiver's process context]
      |    v
      | recvmsg()
      +----------------------------------------------------------------------------
      
      Flow control ("cursor" updates) by means of SMC CDC messages:
      
                     SENDER                            RECEIVER
      
              sends updates via CDC-------------+   sends updates via CDC
              on consuming from sndbuf          |   on consuming from RMBE
              and producing into RMBE           |   by means of recvmsg()
                                                |            |
                                                |            |
            +-----------------------------------|------------+
            |                                   |
         +--v-------------------------+      +--v-----------------------+
         | receiver's consumer cursor |      | sender's producer cursor----+
         +----------------|-----------+      +--------------------------+  |
                          |                                                |
                          |                        receiver's RMBE         |
                          |                  +--------------------------+  |
                          |                  |                          |  |
                          +--------------------------------+            |  |
                                             |             |            |  |
                                             |             v            |  |
                                             |             +------------|  |
                                             |-------------+////////////|  |
                                             |//RDMA data written by////|  |
                                             |////sender that is////////|  |
                                             |/available to be consumed/|  |
                                             |///////// +---------------|  |
                                             |----------+^              |  |
                                             |           |              |  |
                                             |           +-----------------+
                                             |                          |
                                             +--------------------------+
      
      Sending updates of the producer cursor is immediate for low latency;
      something like Nagle's algorithm (absence of TCP_NODELAY) is optional and
      currently not part of this initial Linux implementation.
      Sending updates of the consumer cursor is conditional to avoid the
      silly window syndrome.
      
      Normal connection termination:
      
      Normal connection termination starts transitioning from socket state
      ACTIVE via either "Active Close" or "Passive Close".
      
      shutdown rdwr               +-----------------+
      or close,   +-------------->|  INIT / CLOSED  |<-------------+
      send PeerCon|nClosed        +-----------------+              | PeerConnClosed
                  |                       |                        | received
                  |            connection | established            |
                  |                       V                        |
          +----------------+     +-----------------+     +----------------+
          |AppFinCloseWait |     |     ACTIVE      |     |PeerFinCloseWait|
          +----------------+     +-----------------+     +----------------+
                  |                   |         |                   |
                  |     Active Close: |         |Passive Close:     |
                  |     close or      |         |PeerConnClosed or  |
                  |     shutdown wr or|         |PeerDoneWriting    |
                  |     shutdown rdwr |         |received           |
      
          |                   V         V                   |
       PeerConnClo|sed    +--------------+   +-------------+        | close or
       received   +--<----|PeerCloseWait1|   |AppCloseWait1|--->----+ shutdown rdwr,
                  |       +--------------+   +-------------+        | send
                  |  PeerDoneWri|ting                | shutdown wr, | PeerConnClosed
                  |  received   |            send Pee|rDoneWriting  |
                  |             V                    V              |
                  |       +--------------+   +-------------+        |
                  +--<----|PeerCloseWait2|   |AppCloseWait2|--->----+
                          +--------------+   +-------------+
      
      In state CLOSED, the socket can be destructed only, once the application has
      issued a close().
      
      Abnormal connection termination:
      
                                  +-----------------+
                  +-------------->|  INIT / CLOSED  |<-------------+
                  |               +-----------------+              |
                  |                                                |
                  |           +-----------------------+            |
                  |           |     Any state         |            |
       PeerConnAbo|rt         | (before setting       |            | send
       received   |           |  PeerConnClosed       |            | PeerConnAbort
                  |           |  indicator in         |            |
                  |           |  peer's RMBE)         |            |
                  |           +-----------------------+            |
                  |                   |         |                  |
                  |     Active Abort: |         | Passive Abort:   |
                  |     problem,      |         | PeerConnAbort    |
                  |     send          |         | received,        |
                  |     PeerConnAbort,|         | ECONNRESET       |
                  |     ECONNABORTED  |         |                  |
                  |                   V         V                  |
                  |       +--------------+   +--------------+      |
                  +-------|PeerAbortWait |   | ProcessAbort |------+
                          +--------------+   +--------------+
      
      Implementation notes beyond RFC 7609:
      
      A PNET table in sysfs provides the mapping between network device names and
      RoCE Infiniband device names for the transparent switch of data communication.
      A PNET table can contain an arbitrary number of PNETIDs.
      Each PNETID contains exactly one (Ethernet) network device name
      and one or more RoCE Infiniband device names.
      Each device name can only exist in at most one PNETID (no overlapping).
      This initial Linux implementation allows at most one RoCE Infiniband device
      name per PNETID.
      After a new TCP connection is established, the network device name
      used for egress traffic with the TCP connection's local source IP address
      is used as key to lookup the unique PNETID, and the RoCE Infiniband device
      of this PNETID is used to switch data communication from TCP to RDMA
      during SMC CLC handshake.
      
      Problem determination:
      
      A protocol dissector is available with upstream wireshark for formatting
      SMC-R related RoCE LAN traffic.
      [https://code.wireshark.org/review/gitweb?p=wireshark.git;a=blob;f=epan/dissectors/packet-smcr.c]
      
      We are working on enhancing the Linux implementation to cover:
      
      - Improve default socket closing asynchronicity
      - Address corner cases with many parallel connections
      - Tracing
      - Integrated load balancing and fail-over within a link group
      - Splice and sendpage support
      - IPv6 addressing support
      - Keepalive, Cork
      - Namespaces support
      - Urgent data
      - More socket options
      - Diagnostics
      - Statistics support
      - SNMP support
      
      References:
      
      [1] SMC-R Informational RFC: http://www.rfc-editor.org/info/rfc7609
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f3a3e248
    • Ursula Braun's avatar
      smc: netlink interface for SMC sockets · f16a7dd5
      Ursula Braun authored
      Support for SMC socket monitoring via netlink sockets of protocol
      NETLINK_SOCK_DIAG.
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f16a7dd5
    • Ursula Braun's avatar
      smc: socket closing and linkgroup cleanup · b38d7324
      Ursula Braun authored
      smc_shutdown() and smc_release() handling
      delayed linkgroup cleanup for linkgroups without connections
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b38d7324
    • Ursula Braun's avatar
      smc: receive data from RMBE · 952310cc
      Ursula Braun authored
      move RMBE data into user space buffer and update managing cursors
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      952310cc
    • Ursula Braun's avatar
      smc: send data (through RDMA) · e6727f39
      Ursula Braun authored
      copy data to kernel send buffer, and trigger RDMA write
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e6727f39
    • Ursula Braun's avatar
      smc: connection data control (CDC) · 5f08318f
      Ursula Braun authored
      send and receive CDC messages (via IB message send and CQE)
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5f08318f
    • Ursula Braun's avatar
      smc: link layer control (LLC) · 9bf9abea
      Ursula Braun authored
      send and receive LLC messages CONFIRM_LINK (via IB message send and CQE)
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9bf9abea
    • Ursula Braun's avatar
      smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR · bd4ad577
      Ursula Braun authored
      Prepare the link for RDMA transport:
      Create a queue pair (QP) and move it into the state Ready-To-Receive (RTR).
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bd4ad577
    • Ursula Braun's avatar
      smc: work request (WR) base for use by LLC and CDC · f38ba179
      Ursula Braun authored
      The base containers for RDMA transport are work requests and completion
      queue entries processed through Infiniband verbs:
      * allocate and initialize these areas
      * map these areas to DMA
      * implement the basic communication consisting of work request posting
        and receival of completion queue events
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f38ba179
    • Ursula Braun's avatar
      smc: remote memory buffers (RMBs) · cd6851f3
      Ursula Braun authored
      * allocate data RMB memory for sending and receiving
      * size depends on the maximum socket send and receive buffers
      * allocated RMBs are kept during life time of the owning link group
      * map the allocated RMBs to DMA
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cd6851f3
    • Ursula Braun's avatar
      smc: connection and link group creation · 0cfdd8f9
      Ursula Braun authored
      * create smc_connection for SMC-sockets
      * determine suitable link group for a connection
      * create a new link group if necessary
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0cfdd8f9
    • Ursula Braun's avatar
      smc: CLC handshake (incl. preparation steps) · a046d57d
      Ursula Braun authored
      * CLC (Connection Layer Control) handshake
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a046d57d
    • Thomas Richter's avatar
      smc: establish pnet table management · 6812baab
      Thomas Richter authored
      Connection creation with SMC-R starts through an internal
      TCP-connection. The Ethernet interface for this TCP-connection is not
      restricted to the Ethernet interface of a RoCE device. Any existing
      Ethernet interface belonging to the same physical net can be used, as
      long as there is a defined relation between the Ethernet interface and
      some RoCE devices. This relation is defined with the help of an
      identification string called "Physical Net ID" or short "pnet ID".
      Information about defined pnet IDs and their related Ethernet
      interfaces and RoCE devices is stored in the SMC-R pnet table.
      
      A pnet table entry consists of the identifying pnet ID and the
      associated network and IB device.
      This patch adds pnet table configuration support using the
      generic netlink message interface referring to network and IB device
      by their names. Commands exist to add, delete, and display pnet table
      entries, and to flush or display the entire pnet table.
      
      There are cross-checks to verify whether the ethernet interfaces
      or infiniband devices really exist in the system. If either device
      is not available, the pnet ID entry is not created.
      Loss of network devices and IB devices is also monitored;
      a pnet ID entry is removed when an associated network or
      IB device is removed.
      Signed-off-by: default avatarThomas Richter <tmricht@linux.vnet.ibm.com>
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6812baab
    • Ursula Braun's avatar
      smc: introduce SMC as an IB-client · a4cf0443
      Ursula Braun authored
      * create a list of SMC IB-devices
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a4cf0443
    • Ursula Braun's avatar
      smc: establish new socket family · ac713874
      Ursula Braun authored
      * enable smc module loading and unloading
       * register new socket family
       * basic smc socket creation and deletion
       * use backing TCP socket to run CLC (Connection Layer Control)
         handshake of SMC protocol
       * Setup for infiniband traffic is implemented in follow-on patches.
         For now fallback to TCP socket is always used.
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Reviewed-by: default avatarUtz Bacher <utz.bacher@de.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ac713874
    • Ursula Braun's avatar
      net: introduce keepalive function in struct proto · 4b9d07a4
      Ursula Braun authored
      Direct call of tcp_set_keepalive() function from protocol-agnostic
      sock_setsockopt() function in net/core/sock.c violates network
      layering. And newly introduced protocol (SMC-R) will need its own
      keepalive function. Therefore, add "keepalive" function pointer
      to "struct proto", and call it from sock_setsockopt() via this pointer.
      Signed-off-by: default avatarUrsula Braun <ubraun@linux.vnet.ibm.com>
      Reviewed-by: default avatarUtz Bacher <utz.bacher@de.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4b9d07a4
    • David S. Miller's avatar
      Merge branch 'sh_eth-wol' · c8584b3f
      David S. Miller authored
      Niklas Söderlund says:
      
      ====================
      sh_eth: add wake-on-lan support via magic packet
      
      This series adds support for Wake-on-Lan using Magic Packet for a few
      models of the sh_eth driver. Patch 1/6 fix a naming error, patch 2/6
      adds generic support to control and support WoL while patches 3/6 - 6/6
      enable different models.
      
      Based ontop of net-next master.
      
      Changes since v2.
      - Fix bookkeeping for "active_count" and "event_count" reported in
        /sys/kernel/debug/wakeup_sources. Thanks Geert for noticing this.
      - Add new patch 1/6 which corrects the name of ECMR_MPDE bit, suggested
        by Sergei.
      - s/sh7743/sh7734/ in patch 5/6. Thanks Geert for spotting this.
      - Spelling improvements suggested by Sergei and Geert.
      - Add Tested-by to 3/6 and 4/6.
      
      Changes since v1.
      - Split generic WoL functionality and device enablement to different
        patches.
      - Enable more devices then Gen2 after feedback from Geert and
        datasheets.
      - Do not set mdp->irq_enabled = false and remove specific MagicPacket
        interrupt clearing, instead let sh_eth_error() clear the interrupt as
        for other EMAC interrupts, thanks Sergei for the suggestion.
      - Use the original return logic in sh_eth_resume().
      - Moved sh_eth_private variable *clk to top of data structure  to avoid
        possible gaps due to alignment restrictions.
      - Make wol_enabled in sh_eth_private part of the already existing
        bitfield instead of a bool.
      - Do not initiate mdp->wol_enabled to 0, the struct is kzalloc'ed so
        it's already set to 0.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c8584b3f
    • Niklas Söderlund's avatar
      sh_eth: enable wake-on-lan for sh7763 · 267e1d5c
      Niklas Söderlund authored
      This is based on public datasheet for sh7763 which shows it has the
      same behavior and registers for WoL as other versions of sh_eth.
      Signed-off-by: default avatarNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      267e1d5c
    • Niklas Söderlund's avatar
      sh_eth: enable wake-on-lan for sh7734 · 159c2a90
      Niklas Söderlund authored
      This is based on public datasheet for sh7734 which shows it has the
      same behavior and registers for WoL as other versions of sh_eth.
      Signed-off-by: default avatarNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      159c2a90
    • Niklas Söderlund's avatar
      sh_eth: enable wake-on-lan for r8a7740/armadillo · 33017e24
      Niklas Söderlund authored
      Geert Uytterhoeven reported WoL worked on his Armadillo board.
      Signed-off-by: default avatarNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
      Tested-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      33017e24
    • Niklas Söderlund's avatar
      e410d86d
    • Niklas Söderlund's avatar
      sh_eth: add generic wake-on-lan support via magic packet · d8981d02
      Niklas Söderlund authored
      Add generic functionality to support Wake-on-LAN using MagicPacket which
      are supported by at least a few versions of sh_eth. Only add
      functionality for WoL, no specific sh_eth versions are marked to support
      WoL yet.
      
      WoL is enabled in the suspend callback by setting MagicPacket detection
      and disabling all interrupts expect MagicPacket. In the resume path the
      driver needs to reset the hardware to rearm the WoL logic, this prevents
      the driver from simply restoring the registers and to take advantage of
      that sh_eth was not suspended to reduce resume time. To reset the
      hardware the driver closes and reopens the device just like it would do
      in a normal suspend/resume scenario without WoL enabled, but it both
      closes and opens the device in the resume callback since the device
      needs to be open for WoL to work.
      
      One quirk needed for WoL is that the module clock needs to be prevented
      from being switched off by Runtime PM. To keep the clock alive the
      suspend callback need to call clk_enable() directly to increase the
      usage count of the clock. Then when Runtime PM decreases the clock usage
      count it won't reach 0 and be switched off.
      Signed-off-by: default avatarNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d8981d02