- 19 Jun, 2015 26 commits
-
-
Hyungwon Hwang authored
FIMC & GSC driver can calculate the offset of planes. So there are use cases which IPP receives just one GEM handle of an image with multiple plane. This patch extends ipp_validate_mem_node() to validate this case. Signed-off-by:
Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Hyungwon Hwang authored
Config depends on the opreation. So it must be referenced by an operation id, not a property id. Signed-off-by:
Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Hyungwon Hwang authored
exynos_dsi_host_transfer() can be called through a panel driver while DSI is turning down. It is possible because the function checks only whether DSI is initialized or not, and there is a moment which DSI is set by uninitialized, but DSI is still turning down. To prevent it, DSI must be set by disabled before starting to be turned down, and exynos_dsi_host_transfer() must check whether DSI is enabled or not. Kernel dump: [ 4721.351448] Unhandled fault: synchronous external abort (0x96000210) at 0xffffff800015e018 [ 4721.351809] Internal error: : 96000210 [#1] PREEMPT SMP [ 4721.352031] Modules linked in: [ 4721.352173] CPU: 2 PID: 300 Comm: deviced Tainted: G W 4.0.4-01017-g7964a87 #1 [ 4721.353989] Hardware name: Samsung DRACO board (DT) [ 4721.358852] task: ffffffc0a0b70000 ti: ffffffc0a00ec000 task.ti: ffffffc0a00ec000 [ 4721.366327] PC is at exynos_dsi_enable_lane+0x14/0x5c [ 4721.371353] LR is at exynos_dsi_host_transfer+0x834/0x8d8 [ 4721.376731] pc : [<ffffffc000432bcc>] lr : [<ffffffc000434590>] pstate: 60000145 [ 4721.384107] sp : ffffffc0a00efbe0 [ 4721.387405] x29: ffffffc0a00efbe0 x28: ffffffc0a00ec000 [ 4721.392699] x27: ffffffc000968000 x26: 0000000000000040 [ 4721.397994] x25: ffffffc000f74dc0 x24: ffffffc0a00efec8 [ 4721.403290] x23: ffffffc0a4815400 x22: ffffffc0009f2729 [ 4721.408584] x21: ffffffc0a00efcc8 x20: ffffffc0a4a2a848 [ 4721.413879] x19: ffffffc0a4a2a818 x18: 0000000000000004 [ 4721.419173] x17: 0000007faa5cddf0 x16: ffffffc0001a40a8 [ 4721.424469] x15: 0000000000000009 x14: 000000000000000d [ 4721.429762] x13: 6e6e6f63206b726f x12: 0000000000000010 [ 4721.435058] x11: 0101010101010101 x10: 0000000000000000 [ 4721.440353] x9 : 000000000000000a x8 : 8386838282818381 [ 4721.445648] x7 : ffffffc0a201efe8 x6 : 0000000000000000 [ 4721.450943] x5 : 00000000fffffffa x4 : ffffffc0a201f170 [ 4721.456237] x3 : ffffff800015e000 x2 : ffffff800015e018 [ 4721.461531] x1 : 000000000000000f x0 : ffffffc0a4a2a818 [ 4721.466826] [ 4721.468305] Process deviced (pid: 300, stack limit = 0xffffffc0a00ec028) [ 4721.474989] Stack: (0xffffffc0a00efbe0 to 0xffffffc0a00f0000) [ 4721.480720] fbe0: a00efca0 ffffffc0 0042c944 ffffffc0 a0f2d680 ffffffc0 00000024 00000000 [ 4721.488895] fc00: a4b6d000 ffffffc0 009f2729 ffffffc0 a4815400 ffffffc0 a00efec8 ffffffc0 Signed-off-by:
Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
SoC checking code is not necessary anymore, as exynos_drm_match_add and exynos_drm_platform_probe already properly handles situation when there are no Exynos DRM components. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Tested-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
In case there are multiple pipelines and deferred probe occurs, only components of the first pipeline were bound. As a result only one pipeline was available. The main cause of this issue was dynamic generation of component match table - every component driver during probe registered itself on helper list, if there was at least one pipeline present on this list component match table were created without deferred components. This patch removes this helper list, instead it creates match table from existing devices requiring exynos_drm KMS drivers. This way match table do not depend on probe/deferral order and contains all KMS components. As a side effect patch makes the code cleaner and significantly smaller. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
Code registering different drivers and simple platform devices was dispersed across multiple sub-modules. This patch moves it to one place. As a result initialization code is shorter and cleaner and should simplify further development. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
Check error and call DRM_ERROR if clk_prepare_enable() fails. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Inki Dae authored
This patch makes one of Linux framebuffer and DRM CRTC drivers to be enabled. Display controllers, FIMD and DECON, can be controlled by Linux framebuffer or DRM CRTC drivers so only one of them should be enabled. Signed-off-by:
Inki Dae <inki.dae@samsung.com> Reviewed-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Inki Dae authored
This patch removes unnsed varables in vidi_disable function. Signed-off-by:
Inki Dae <inki.dae@samsung.com> Reviewed-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Gustavo Padovan authored
To follow more closely the new atomic API we split the dpms() helper into the enable() and disable() helper to get exactly the same semantics. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
The planes are already disabled by the drm_atomic_helper_commit() code so we don't need to disable the in these two places. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
Joonyoung Shim <jy0922.shim@samsung.com> Tested-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
Run dpms operations through the atomic intefaces. This basically removes the .dpms() callback from econders and crtcs and use .disable() and .enable() to turn the crtc on and off. v2: Address comments by Joonyoung: - make hdmi code call ->disable() instead of ->dpms() - do not use WARN_ON on crtc enable/disable v3: - Fix build failure after the hdmi change in v2 - Change dpms helper of ptn3460 bridge v4: - remove win_commit() call from .enable() v5: - move .atomic_check() to the atomic PageFlip patch, and transform it in .atomic_begin() Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
Joonyoung Shim <jy0922.shim@samsung.com> Tested-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
exynos needs to update planes with the crtc enabled (mainly for the FIMD case) so this specific atomic commit changes the order of drm_atomic_helper_commit_modeset_enables() and drm_atomic_helper_commit_planes() to commit planes after we enable crtc and encoders. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
This is a preparation commit to move exynos_drm_crtc_disable() together with the future exynos_drm_crtc_enable() that will come from the split of exynos_drm_crtc_dpms() callback. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
Everything starts disabled so we don't really need to disable anything. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
Joonyoung Shim <jy0922.shim@samsung.com> Tested-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
Now that no one is using the functions exported by exynos_drm_plane due to the atomic conversion we can make remove some of the them or make them static. v2: remove unused exynos_drm_crtc v3: fix checkpatch error (reported by Joonyoung) Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
Joonyoung Shim <jy0922.shim@samsung.com> Tested-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
PageFlips now use the atomic helper to work through the atomic modesetting API. Async page flips are not supported yet. v2: Add .atomic_begin() step to handle the vblank part we removed from exynos page_flip code. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
Joonyoung Shim <jy0922.shim@samsung.com> Tested-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
Now that phase 1 and 2 are complete switch .set_config helper to use the atomic one. v2: also remove .prepare() callback v3: remove .mode_set() and .mode_set_base() and encoder's .prepare() callbacks Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
Joonyoung Shim <jy0922.shim@samsung.com> Tested-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
Now that phase 1 and 2 are complete we can switch the update/disable_plane callbacks to their atomic version. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
Joonyoung Shim <jy0922.shim@samsung.com> Tested-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
Use drm_atomic_set_fb_for_plane() in the legacy page_flip path to keep track of the framebuffer pointer and reference. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
Joonyoung Shim <jy0922.shim@samsung.com> Tested-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
Set CRTC, planes and connectors to use the default implementations from the atomic helper library. The helpers will work to keep track of state for each DRM object. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
Joonyoung Shim <jy0922.shim@samsung.com> Tested-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Joonyoung Shim authored
Handle changes by removing copy from adjusted_mode to mode as using adjusted_mode of crtc_state. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
The new atomic infrastructure needs the .mode_set_nofb() callback to update CRTC timings before setting any plane. v2: remove WARN_ON(!crtc->state) from mode_set_nofb Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
Joonyoung Shim <jy0922.shim@samsung.com> Tested-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
The atomic helper to disable planes also uses the optional .atomic_disable() helper. The unique operation it does is calling .win_disable() Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
Joonyoung Shim <jy0922.shim@samsung.com> Tested-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Gustavo Padovan authored
Rip out the check from exynos_update_plane() and create exynos_check_plane() for the check phase enabling use to use the atomic helpers to call our check and update phases when updating planes. Update all users of exynos_update_plane() accordingly to call exynos_check_plane() before. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>y Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Joonyoung Shim authored
The exynos_update_plane function needs 16.16 fixed point source data. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Reviewed-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
- 18 Jun, 2015 5 commits
-
-
git://git.kraxel.org/linuxDave Airlie authored
fixes and virtio-vga support. * 'virtio-gpu-drm-next' of git://git.kraxel.org/linux: virtio-gpu: add locking for vbuf pool drm/virtgpu: initialise fbdev after getting initial display info Add virtio-vga bits.
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/panel: Changes for v4.2-rc1 This contains fixes for the long-standing build issues that some of the bridge drivers were exposing. Other than that it's mostly cleanup and a couple of new simple panels that are supported. * tag 'drm/panel/for-4.2-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/panel: simple: Add bus format for HannStar HSD100PXN1 drm/panel: simple: Add display timing for HannStar HSD100PXN1 drm/panel: ld9040: Remove useless padding drm/panel: Constify OF match tables drm/bridge: Remove stale ptn3460.h include drm/bridge: ps8622: Include linux/gpio/consumer.h drm/bridge: ptn3460: Include linux/gpio/consumer.h drm/bridge: dw-hdmi: Return number of EDID modes drm/panel: simple: Add support for LG LB070WV8 800x480 7" panel drm/bridge: ptn3460: Pass flags to devm_gpiod_get() drm/bridge: ps8622: Pass flags to devm_gpiod_get() drm/bridge: ptn3460: Fix I2C ID table to match the reported modalias drm/bridge: dw-hdmi: Staticize dw_hdmi_bridge_funcs
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/tegra: Changes for v4.2-rc1 This contains a couple of mostly fixes for issues that have crept up in recent versions of linux-next. One issue is that DP AUX transactions of more than 4 bytes will access the wrong FIFO registers and hence become corrupt. Another fix is required to restore functionality of Tegra20 if using the GART. The current code expects the IOMMU aperture to be the complete 4 GiB address space, whereas the GART on Tegra20 only provides a 128 MiB aperture. One more issue with IOMMU support is that on 64-bit ARM, swiotlb is the default IOMMU implementation backing the DMA API. A side-effect of that is that when dma_map_sg() is called to flush caches (yes, this is a bit of a hack, but ARM does not provide a better API), swiotlb will immediately run out of memory because its bounce buffer is too small to make a framebuffer. Finally I've included a mostly cosmetic fix that stores register values in u32 rather than unsigned long to avoid sign-extension issues on 64- bit ARM. This is only a precaution since it hasn't caused any issues (yet). * tag 'drm/tegra/for-4.2-rc1' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: dpaux: Registers are 32-bit drm/tegra: gem: Flush pages after allocation drm/tegra: gem: Take into account IOMMU aperture drm/tegra: dpaux: Fix transfers larger than 4 bytes
-
git://linuxtv.org/pinchartl/fbdevDave Airlie authored
rcar-du fixes * 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev: drm: rcar-du: Use the drm atomic state duplication helpers for planes drm: rcar-du: Clean up planes in the error paths of .atomic_commit() drm: rcar-du: Convert rcar_du_encoders_init_one() return value to 0/<0 drm: rcar-du: Clarify error message when encoder initialization fails drm: rcar-du: Fix crash with groups that have less than 9 planes drm: rcar-du: Disable all planes when stopping the CRTC drm: rcar-du: Print the error value when DRM/KMS init fails
-
Dave Airlie authored
Merge tag 'drm-amdkfd-next-fixes-2015-06-16' of git://people.freedesktop.org/~gabbayo/linux into drm-next - Dan fixed some range checks in the address watch ioctl impl. - Remove obsolete member from radeon_device structure * tag 'drm-amdkfd-next-fixes-2015-06-16' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: fix some range checks in address watch ioctl drm/radeon: remove obsolete kfd_bo from radeon_device
-
- 16 Jun, 2015 9 commits
-
-
Dan Carpenter authored
buf_size_in_bytes must be large enough to hold ->num_watch_points and watch_mode so I have added a sizeof(int) * 2 to the minimum size. Also we have to subtract sizeof(*args) from the max args_idx limit so that it matches the allocation. Also I changed a > to >= for the last compare. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com>
-
Laurent Pinchart authored
Ensure that the duplicate and destroy plane state operations will always be in sync with the DRM core implementation of the plane state by using the __drm_atomic_helper_plane_duplicate_state() and __drm_atomic_helper_plane_destroy_state() functions designed especially for this purpose. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Laurent Pinchart authored
When the .atomic_commit() handler fails, clean up planes previoulsy prepared by drm_atomic_helper_prepare_planes() with a call to drm_atomic_helper_cleanup_planes(). Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
Laurent Pinchart authored
The function returns 1 on success, and either 0 or a negative error code on failure. As the 0 and negative values don't need to be differentiated by the caller, convert it to the usual scheme of returning 0 on success and a negative error code on failure. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Laurent Pinchart authored
A failure to initialize an encoder currently prints an error message in the kernel log without mentioning which encoder failed to initialize. To help debugging initialization issues print the encoder DT node name. This requires moving the error message to the rcar_du_encoders_init_one function and refactoring it slightly. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Laurent Pinchart authored
Commit 917de180 ("drm: rcar-du: Implement universal plane support") made the number of planes per group dynamic, but didn't update all loops over the planes array, resulting in out-of-bound accesses on DU instances that have an odd number of CRTCs (such as the R8A7790). Fix it. Fixes: 917de180 ("drm: rcar-du: Implement universal plane support") Cc: stable@vger.kernel.org Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Laurent Pinchart authored
The DSnPR plane configuration registers are updated on vblank, and no vblank will occur once the CRTC is stopped. We thus can't only disable planes right before starting the CRTC as it would start scanning out immediately from old frame buffers until the next vblank. Fix the problem by disabling all planes when stopping the CRTC and wait for the change to take effect. This increases the CRTC stop delay, especially when multiple CRTCs are stopped in one operation as we now wait for one vblank per CRTC. Whether this can be improved needs to be researched. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Laurent Pinchart authored
This helps debugging probe failures. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Dave Airlie authored
Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-