- 02 Jun, 2017 8 commits
-
-
Christophe Leroy authored
IRQ 0 is a valid HW interrupt. So get_irq() shall return 0 when there is no irq, instead of returning irq_linear_revmap(... ,0) Fixes: f2a0bd37 ("[POWERPC] 8xx: powerpc port of core CPM PIC") Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Christophe Leroy authored
Signed-off-by:
-
Christophe Leroy authored
The 8xx has a dedicated exception for breakpoints, that directly calls do_break() Signed-off-by:
-
Christophe Leroy authored
Analysis of the assembly code shows that when using user_mode(regs), at least the 'andi.' is redone all the time, and also the 'lwz ,132(r31)' most of the time. With the new form, the 'is_user' is mapped to cr4, then all further use of is_user results in just things like 'beq cr4,218 <do_page_fault+0x218>' Without the patch: 50: 81 1e 00 84 lwz r8,132(r30) 54: 71 09 40 00 andi. r9,r8,16384 58: 40 82 00 0c bne 64 <do_page_fault+0x64> 84: 81 3e 00 84 lwz r9,132(r30) 8c: 71 2a 40 00 andi. r10,r9,16384 90: 41 a2 01 64 beq 1f4 <do_page_fault+0x1f4> d4: 81 3e 00 84 lwz r9,132(r30) dc: 71 28 40 00 andi. r8,r9,16384 e0: 41 82 02 08 beq 2e8 <do_page_fault+0x2e8> 108: 81 3e 00 84 lwz r9,132(r30) 110: 71 28 40 00 andi. r8,r9,16384 118: 41 82 02 28 beq 340 <do_page_fault+0x340> 1e4: 81 3e 00 84 lwz r9,132(r30) 1e8: 71 2a 40 00 andi. r10,r9,16384 1ec: 40 82 01 68 bne 354 <do_page_fault+0x354> 228: 81 3e 00 84 lwz r9,132(r30) 22c: 71 28 40 00 andi. r8,r9,16384 230: 41 82 ff c4 beq 1f4 <do_page_fault+0x1f4> 288: 71 2a 40 00 andi. r10,r9,16384 294: 41 a2 fe 60 beq f4 <do_page_fault+0xf4> 50c: 81 3e 00 84 lwz r9,132(r30) 514: 71 2a 40 00 andi. r10,r9,16384 518: 40 a2 fc e0 bne 1f8 <do_page_fault+0x1f8> 534: 81 3e 00 84 lwz r9,132(r30) 53c: 71 2a 40 00 andi. r10,r9,16384 540: 41 82 fc b8 beq 1f8 <do_page_fault+0x1f8> This patch creates a local var called 'is_user' which contains the result of user_mode(regs) With the patch: 20: 81 03 00 84 lwz r8,132(r3) 48: 55 09 97 fe rlwinm r9,r8,18,31,31 58: 2e 09 00 00 cmpwi cr4,r9,0 5c: 40 92 00 0c bne cr4,68 <do_page_fault+0x68> 88: 41 b2 01 90 beq cr4,218 <do_page_fault+0x218> d4: 40 92 01 d0 bne cr4,2a4 <do_page_fault+0x2a4> 120: 41 b2 00 f8 beq cr4,218 <do_page_fault+0x218> 138: 41 b2 ff a0 beq cr4,d8 <do_page_fault+0xd8> 1d4: 40 92 00 e0 bne cr4,2b4 <do_page_fault+0x2b4> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Christophe Leroy authored
The result of (trap == 0x400) is already in is_exec. Signed-off-by:
-
Christophe Leroy authored
Function store_updates_sp() checks whether the faulting instruction is a store updating r1. Therefore we can limit its calls to store exceptions. This patch is an improvement of commit a7a9dcd8 ("powerpc: Avoid taking a data miss on every userspace instruction miss") With the same microbenchmark app, run with 500 as argument, on an MPC885 we get: Before this patch: 152000 DTLB misses After this patch: 147000 DTLB misses Signed-off-by:
-
Christophe Leroy authored
This function has not been used since commit 9494a1e8 ("powerpc: use generic fixmap.h) Signed-off-by:
-
Balbir Singh authored
The check in hpte_find() should be < and not <= for PAGE_OFFSET Signed-off-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
- 30 May, 2017 28 commits
-
-
Nicholas Piggin authored
Add --orphan-handling=warn to final link flags. This ensures we can handle all sections explicitly. This would have caught subtle breakage such as 7de3b27b at build-time. Also bring existing orphan sections into the fold: - .text.hot and .text.unlikely are compiler generated sections. - .sdata2, .dynsbss, .plt are used by PPC32 - We previously did not specify DWARF_DEBUG or STABS_DEBUG - DWARF_DEBUG did not include all DWARF sections that can be emitted - A number of sections are unused and can be discarded. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
Use a tool to check that the location of "fixed sections" are where we expected them to be, which catches cases the linker script can't (stubs being added to start of .text section), and which ends up being neater. Sample output: ERROR: start_text address is c000000000008100, should be c000000000008000 ERROR: see comments in arch/powerpc/tools/head_check.sh Signed-off-by:
-
Nicholas Piggin authored
Very large kernels may require linker stubs for branches from HEAD text code. The linker may place these stubs before the HEAD text sections, which breaks the assumption that HEAD text is located at 0 (or the .text section being located at 0x7000/0x8000 on Book3S kernels). Provide an option to create a small section just before the .text section with an empty 256 - 4 bytes, and adjust the start of the .text section to match. The linker will tend to put stubs in that section and not break our relative-to-absolute offset assumptions. This causes a small waste of space on common kernels, but allows large kernels to build and boot. For now, it is an EXPERT config option, defaulting to =n, but a reference is provided for it in the build-time check for such breakage. This is good enough for allyesconfig and custom users / hackers. Signed-off-by:
-
Nicholas Piggin authored
Direct banches from code below __end_interrupts to code above __end_interrupts when built with CONFIG_RELOCATABLE are disallowed because they will break when the kernel is not located at 0. Sample output: WARNING: Unrelocated relative branches c000000000000118 bl-> 0xc000000000038fb8 <pnv_restore_hyp_resource> c00000000000013c b-> 0xc0000000001068a4 <kvm_start_guest> c000000000000148 b-> 0xc00000000003919c <pnv_wakeup_loss> c00000000000014c b-> 0xc00000000003923c <pnv_wakeup_noloss> c0000000000005a4 b-> 0xc000000000106ffc <kvmppc_interrupt_hv> c000000000001af0 b-> 0xc000000000106ffc <kvmppc_interrupt_hv> c000000000001b24 b-> 0xc000000000106ffc <kvmppc_interrupt_hv> c000000000001b58 b-> 0xc000000000106ffc <kvmppc_interrupt_hv> Signed-off-by: -
Nicholas Piggin authored
For final link, the powerpc64 linker generates fpr save/restore functions on-demand, placing them in the .sfpr section. Starting with binutils 2.25, these can be provided for non-final links with --save-restore-funcs. Use that where possible for module links. This saves about 200 bytes per module (~60kB) on powernv defconfig build. Signed-off-by:
-
Nicholas Piggin authored
There is no need to create a new section for these. Consolidate with 32-bit and just use .text. Signed-off-by:
-
Nicholas Piggin authored
crtsaveres.S is empty with 64-bit builds already, so just don't build and link it to match the vmlinux build. Signed-off-by:
-
Nicholas Piggin authored
The 64-bit linker creates save/restore functions on demand with final links, so vmlinux does not require crtsavres.o. Make crtsavres.o extra-y on 64-bit (it is still required by modules). Signed-off-by:
-
Nicholas Piggin authored
Signed-off-by:
-
Stephen Rothwell authored
The arch version is identical except for comments and white space. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Stephen Rothwell authored
These are completely obvious as all they do is include the asm-generic versions. Signed-off-by:
-
Ivan Mikhaylov authored
Prevent a kernel panic caused by unintentionally clearing TCR watchdog bits. At this point in the kernel boot, the watchdog may have already been enabled by u-boot. The original code's attempt to write to the TCR register results in an inadvertent clearing of the watchdog configuration bits, causing the 476 to reset. Signed-off-by:
Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by:
-
Ivan Mikhaylov authored
This patch adds default FSP2 config for main usage. Signed-off-by:
-
Ivan Mikhaylov authored
Add a device tree for FSP2 board (476 based). Signed-off-by:
-
Ivan Mikhaylov authored
Add platform code support for FSP2 (476fpe) board. Signed-off-by:
-
Gautham R. Shenoy authored
The current code in the cpuidle-powernv intialization only allows deep stop states (indicated by OPAL_PM_STOP_INST_DEEP) which lose timebase (indicated by OPAL_PM_TIMEBASE_STOP). This assumption goes back to POWER8 time where deep states used to lose the timebase. However, on POWER9, we do have stop states that are deep (they lose hypervisor state) but retain the timebase. Fix the initialization code in the cpuidle-powernv driver to allow such deep states. Further, there is a bug in cpuidle-powernv driver with CONFIG_TICK_ONESHOT=n where we end up incrementing the nr_idle_states even if a platform idle state which loses time base was not added to the cpuidle table. Fix this by ensuring that the nr_idle_states variable gets incremented only when the platform idle state was added to the cpuidle table. Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Gautham R. Shenoy authored
On Power9 DD1 due to a hardware bug the Power-Saving Level Status field (PLS) of the PSSCR for a thread waking up from a deep state can under-report if some other thread in the core is in a shallow stop state. The scenario in which this can manifest is as follows: 1) All the threads of the core are in deep stop. 2) One of the threads is woken up. The PLS for this thread will correctly reflect that it is waking up from deep stop. 3) The thread that has woken up now executes a shallow stop. 4) When some other thread in the core is woken, its PLS will reflect the shallow stop state. Thus, the subsequent thread for which the PLS is under-reporting the wakeup state will not restore the hypervisor resources. Hence, on DD1 systems, use the Requested Level (RL) field as a workaround to restore the contents of the hypervisor resources on the wakeup from the stop state. Signed-off-by: -
Akshay Adiga authored
Some of the SPR values (HID0, MSR, SPRG0) don't change during the run time of a booted kernel, once they have been initialized. The contents of these SPRs are lost when the CPUs enter deep stop states. So instead saving and restoring SPRs from the kernel, use the stop-api provided by the firmware by which the firmware can restore the contents of these SPRs to their initialized values after wakeup from a deep stop state. Apart from these, program the PSSCR value to that of the deepest stop state via the stop-api. This will be used to indicate to the underlying firmware as to what stop state to put the threads that have been woken up by a special-wakeup. And while we are at programming SPRs via stop-api, ensure that HID1, HID4 and HID5 registers which are only available on POWER8 are not requested to be restored by the firware on POWER9. Signed-off-by:
Akshay Adiga <akshay.adiga@linux.vnet.ibm.com> Signed-off-by:
-
Gautham R. Shenoy authored
On wakeup from a deep stop state which is supposed to lose the hypervisor state, we don't restore the LPCR to the old value but set it to a "sane" value via cur_cpu_spec->cpu_restore(). The problem is that the "sane" value doesn't include UPRT and the HR bits which are required to run correctly in Radix mode. Fix this on POWER9 onwards by restoring the LPCR value whatever it was before executing the stop instruction. Signed-off-by:
-
Gautham R. Shenoy authored
On POWER8, in case of - nap: both timebase and hypervisor state is retained. - fast-sleep: timebase is lost. But the hypervisor state is retained. - winkle: timebase and hypervisor state is lost. Hence, the current code for handling exit from a idle state assumes that if the timebase value is retained, then so is the hypervisor state. Thus, the current code doesn't restore per-core hypervisor state in such cases. But that is no longer the case on POWER9 where we do have stop states in which timebase value is retained, but the hypervisor state is lost. So we have to ensure that the per-core hypervisor state gets restored in such cases. Fix this by ensuring that even in the case when timebase is retained, we explicitly check if we are waking up from a deep stop that loses per-core hypervisor state (indicated by cr4 being eq or gt), and if this is the case, we restore the per-core hypervisor state. Signed-off-by:
-
Gautham R. Shenoy authored
The lower 8 bits of core_idle_state_ptr tracks the number of non-idle threads in the core. This is supposed to be initialized to bit-map corresponding to the threads_per_core. However, currently it is initialized to PNV_CORE_IDLE_THREAD_BITS (0xFF). This is correct for POWER8 which has 8 threads per core, but not for POWER9 which has 4 threads per core. As a result, on POWER9, core_idle_state_ptr gets initialized to 0xFF. In case when all the threads of the core are idle, the bits corresponding tracking the idle-threads are non-zero. As a result, the idle entry/exit code fails to save/restore per-core hypervisor state since it assumes that there are threads in the cores which are still active. Fix this by correctly initializing the lower bits of the core_idle_state_ptr on the basis of threads_per_core. Signed-off-by:
-
Anton Blanchard authored
Allow us to enable IRQ_TIME_ACCOUNTING. Even though we currently use VIRT_CPU_ACCOUNTING_NATIVE, that option is quite heavy weight and IRQ_TIME_ACCOUNTING might be better in some cases. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Pavel Machek authored
Currently the DTS defines two partitions at the same addresses, if you use one, you will corrupt information on the other one. Fix it by shifting the second partition. Signed-off-by:
Pavel Machek <pavel@denx.de> [mpe: Reconstruct change log from email thread] Signed-off-by:
-
Andrew Jeffery authored
Experiments with the netperf benchmark indicated that the size selecting VMX-based copies in __copy_tofrom_user_power7() was suboptimal on POWER8. Measurements showed that parity was in the neighbourhood of 3328 bytes, rather than greater than 4096. The change gives a 1.5-2.0% improvement in performance for 4096-byte buffers, reducing the relative time spent in __copy_tofrom_user_power7() from approximately 7% to approximately 5% in the TCP_RR benchmark. Signed-off-by:
Andrew Jeffery <andrew@aj.id.au> Acked-by:
-
Nicholas Piggin authored
Rearrange the code so that mode and badaddr are only defined when they're used. Also unsplit the string for easier grepping, and switch from CONFIG_8xx which is deprecated to CONFIG_PPC_8xx. Signed-off-by:
-
Nicholas Piggin authored
Fixes: a7cd88da ("powerpc/powernv: Move CPU-Offline idle state invocation from smp.c to idle.c") Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
OPAL_CALL uses SRR[01] with MSR_RI=1, which gets corrupted if there is an interleaving system reset or machine check interrupt. Use HSRR[01] instead, which does not require MSR_RI=0. Signed-off-by:
-
Nicholas Piggin authored
FIXUP_ENDIAN uses SRR[01] with MSR_RI=1, which gets corrupted if there is an interleaving system reset or machine check interrupt. Set MSR_RI=0 before setting SRRs. The rfid will restore MSR. Signed-off-by:
-
- 29 May, 2017 1 commit
-
-
Linus Torvalds authored
-
- 28 May, 2017 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermalLinus Torvalds authored
Pull thermal SoC management fixes from Eduardo Valentin: - fixes to TI SoC driver, Broadcom, qoriq - small sparse warning fix on thermal core * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: broadcom: ns-thermal: default on iProc SoCs ti-soc-thermal: Fix a typo in a comment line ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build() ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build() thermal: core: make thermal_emergency_poweroff static thermal: qoriq: remove useless call for of_thermal_get_trip_points()
-
- 27 May, 2017 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some serial and tty fixes for 4.12-rc3. They are a bit bigger than normal, which is why I had them bake in linux-next for a few weeks and didn't send them to you for -rc2. They revert a few of the serdev patches from 4.12-rc1, and bring things back to how they were in 4.11, to try to make things a bit more stable there. Rob and Johan both agree that this is the way forward, so this isn't people squabbling over semantics. Other than that, just a few minor serial driver fixes that people have had problems with. All of these have been in linux-next for a few weeks with no reported issues" * tag 'tty-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: altera_uart: call iounmap() at driver remove serial: imx: ensure UCR3 and UFCR are setup correctly MAINTAINERS/serial: Change maintainer of jsm driver serial: enable serdev support tty/serdev: add serdev registration interface serdev: Restore serdev_device_write_buf for atomic context serial: core: fix crash in uart_suspend_port tty: fix port buffer locking tty: ehv_bytechan: clean up init error handling serial: ifx6x60: fix use-after-free on module unload serial: altera_jtaguart: adding iounmap() serial: exar: Fix stuck MSIs serial: efm32: Fix parity management in 'efm32_uart_console_get_options()' serdev: fix tty-port client deregistration Revert "tty_port: register tty ports with serdev bus" drivers/tty: 8250: only call fintek_8250_probe when doing port I/O
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Fix running SPU programs on Cell, and a few other minor fixes. Thanks to Alistair Popple, Jeremy Kerr, Michael Neuling, Nicholas Piggin" * tag 'powerpc-4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Add PPC_FEATURE userspace bits for SCV and DARN instructions powerpc/spufs: Fix hash faults for kernel regions powerpc: Fix booting P9 hash with CONFIG_PPC_RADIX_MMU=N powerpc/powernv/npu-dma.c: Fix opal_npu_destroy_context() call selftests/powerpc: Fix TM resched DSCR test with some compilers
-
