- 29 Feb, 2024 24 commits
-
-
Théo Lebrun authored
We create a custom compatible for the STA2X11 IP block as integrated into the Mobileye EyeQ5 platform. Its wake and alternate functions have been disabled, we want to avoid touching those registers. We both do: (1) early return in functions that do not support the platform, but with warnings, and (2) avoid calling those functions in the first place. We ensure that pinctrl-nomadik is not used with this STA2X11 variant. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-24-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Read the "ngpios" property to determine the number of GPIOs for a bank. If not available, fallback to NMK_GPIO_PER_CHIP ie 32 ie the current behavior. The IP block always supports 32 GPIOs, but platforms can expose a lesser amount. The Mobileye EyeQ5 is in this case; one bank is 29 GPIOs and the other is 23. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-23-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Support a single IRQs used by multiple GPIO banks. Change the IRQ handler type from a chained handler (as used by gpiolib for ->parent_handler) to a threaded IRQ. Use the generic_handle_domain_irq_safe() helper. The non-safe version must be called in a no-IRQ context. The Mobileye EyeQ5 platform uses this GPIO controller and share an IRQ for its two banks. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-22-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
This GPIO driver is historically related to the Nomadik platform. It however can be used by others as it implements the ST STA2X11 IP block. Pick a less ambiguous name for it. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-21-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Not all platforms using this platform driver expose a clock for this GPIO controller. Turn devm_clk_get() into devm_clk_get_optional() to avoid failing when no clocks are provided. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-20-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Move away from statically allocated GPIO IDs. Switch to dynamic ID allocation. Static IDs are deprecated because they cause issues when multiple GPIO controllers are to be found on the same platform. Add a bit of complexity to do pin number -> GPIO chip + offset. Previously, bank number and offsets were retrieved using division and remainder (bank size being constant 32). Now, to get the pin number matching a bank base, we must know the sum of ngpios of previous banks. This is done in find_nmk_gpio_from_pin() which also exposes the offset inside the bank. Also remove the assumption that bank sizes are constant. Instead of using NMK_GPIO_PER_CHIP as bank size, use nmk_gpio_chips[i]->ngpio. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-19-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Replace call to clk_get() by call to devm_clk_get(). Allow automatic cleanup of the clock in case of probe error. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-18-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Replace calls to platform_get_resource() then devm_ioremap_resource() by a single call to devm_platform_ioremap_resource(). Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-17-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Avoid OF APIs in the GPIO subsystem. Here, replace of_property_read_{u32,bool}() call by device_property_read_{u32,bool}(). Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-16-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Avoid OF APIs in the GPIO subsystem. Here, replace of_find_device_by_node() call by bus_find_device_by_of_node(). The new helper returns a struct device pointer. Store it in a new local variable and use it down the road. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-15-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Add linux/slab.h header include for GFP flags. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-14-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Fix strict checkpatch warnings relative to if-else blocks and bool expressions. Message types addressed: CHECK: Comparison to NULL could be written "!nmk_cfg_params[index].choice" CHECK: Unbalanced braces around else statement CHECK: Using comparison to false is error prone CHECK: Using comparison to true is error prone CHECK: braces {} should be used on all arms of this statement Before: 0 errors, 1 warnings, 16 checks. After: 0 errors, 1 warnings, 7 checks. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-13-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Fix strict checkpatch warnings relative to whitespace. Message types addressed: ERROR: space required before the open parenthesis '(' WARNING: quoted string split across lines CHECK: Alignment should match open parenthesis CHECK: Please don't use multiple blank lines CHECK: line length of 103 exceeds 100 columns CHECK: spaces preferred around that '+' (ctx:VxV) Before: 1 errors, 2 warnings, 38 checks. After: 0 errors, 1 warnings, 16 checks. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-12-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Fix strict checkpatch warnings relative to types. Warning types addressed: WARNING: do not add new typedefs WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: static const char * array should probably be static const char * const Total messages before: 1 errors, 40 warnings, 39 checks. Total messages after: 1 errors, 2 warnings, 38 checks. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-11-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
nmk_pinctrl_probe() iterates over each GPIO block. Use an early conditional continue to skip to the next iteration rather than indent all the loop code block. Do not change code logic. The block is changed from: for (i = 0; i < NMK_MAX_BANKS; i++) { x = of_parse_phandle(...); if (x) { ... do work ... } } To: for (i = 0; i < NMK_MAX_BANKS; i++) { x = of_parse_phandle(...); if (!x) continue; ... do work ... } Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-10-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Fix compiler warning found in the pinctrl-nomadik platform driver. GCC message is as such: drivers/pinctrl/nomadik/pinctrl-nomadik.c:1169:12: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-9-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Fix compiler warning found in the pinctrl-nomadik platform driver. GCC message is as such: drivers/pinctrl/nomadik/pinctrl-nomadik.c:855:21: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 5 has type ‘size_t {aka const long unsigned int}’ [-Wformat=] Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-8-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
PINCTRL_NOMADIK, PINCTRL_STN8815 and PINCTRL_DB8500 depend on ARCH_U8500 or ARCH_NOMADIK. Add COMPILE_TEST as an option to allow test building the driver. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-7-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Previously, drivers/pinctrl/nomadik/pinctrl-nomadik.c registered two platform drivers: pinctrl & GPIO. Move the GPIO aspect to the drivers/gpio/ folder, as would be expected. Both drivers are intertwined for a reason; pinctrl requires access to GPIO registers for pinmuxing, pull-disable, disabling interrupts while setting the muxing and wakeup control. Information sharing is done through a shared array containing GPIO chips and a few helper functions. That shared array is not touched from gpio-nomadik when CONFIG_PINCTRL_NOMADIK is not defined. Make no change to the code that moved into gpio-nomadik; there should be no behavior change following. A few functions are shared and header comments are added. Checkpatch warnings are addressed. NUM_BANKS is renamed to NMK_MAX_BANKS. It is supported to compile gpio-nomadik without pinctrl-nomadik. The opposite is not true. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-6-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Previously, the statement looked like: slpm[x] &= ~BIT(g->grp.pins[i]); Where: - slpm is a unsigned int pointer; - g->grp.pins[i] is a pin number. It can grow to more than 32. The expected shift amount is a pin bank offset. This bug does not occur on every group or pin: the altsetting must be NMK_GPIO_ALT_C and the pin must be 32 or above. It might have occured. For example, in pinctrl-nomadik-db8500.c, pin group i2c3_c_2 has the right altsetting and pins 229 and 230. Fixes: dbfe8ca2 ("pinctrl/nomadik: implement pin multiplexing") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-5-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Add optional reset device-tree property to the Nomadik GPIO controller. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-4-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
This GPIO controller is used on the Mobileye EyeQ5 SoC. Add its compatible to the dt-bindings. One difference is that the block as integrated on EyeQ5 does not support sleep-mode. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-3-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
This GPIO controller can support a lesser number of GPIOs than 32. Express that in devicetree using an optional, generic property. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-2-3ba757474006@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
-
Théo Lebrun authored
Create gpio/st,nomadik-gpio.yaml json-schema dt-bindings file as a direct translation from gpio-nmk.txt. Remove the txt file. Add clocks and gpio-ranges properties which were missing and are being used in Nomadik devicetrees. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240228-mbly-gpio-v2-1-3ba757474006@bootlin.com [Dropped an unused label] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-
- 21 Jan, 2024 16 commits
-
-
Linus Torvalds authored
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull more bcachefs updates from Kent Overstreet: "Some fixes, Some refactoring, some minor features: - Assorted prep work for disk space accounting rewrite - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this makes our trigger context more explicit - A few fixes to avoid excessive transaction restarts on multithreaded workloads: fstests (in addition to ktest tests) are now checking slowpath counters, and that's shaking out a few bugs - Assorted tracepoint improvements - Starting to break up bcachefs_format.h and move on disk types so they're with the code they belong to; this will make room to start documenting the on disk format better. - A few minor fixes" * tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits) bcachefs: Improve inode_to_text() bcachefs: logged_ops_format.h bcachefs: reflink_format.h bcachefs; extents_format.h bcachefs: ec_format.h bcachefs: subvolume_format.h bcachefs: snapshot_format.h bcachefs: alloc_background_format.h bcachefs: xattr_format.h bcachefs: dirent_format.h bcachefs: inode_format.h bcachefs; quota_format.h bcachefs: sb-counters_format.h bcachefs: counters.c -> sb-counters.c bcachefs: comment bch_subvolume bcachefs: bch_snapshot::btime bcachefs: add missing __GFP_NOWARN bcachefs: opts->compression can now also be applied in the background bcachefs: Prep work for variable size btree node buffers bcachefs: grab s_umount only if snapshotting ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "Updates for time and clocksources: - A fix for the idle and iowait time accounting vs CPU hotplug. The time is reset on CPU hotplug which makes the accumulated systemwide time jump backwards. - Assorted fixes and improvements for clocksource/event drivers" * tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug clocksource/drivers/ep93xx: Fix error handling during probe clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings clocksource/timer-riscv: Add riscv_clock_shutdown callback dt-bindings: timer: Add StarFive JH8100 clint dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Aneesh Kumar: - Increase default stack size to 32KB for Book3S Thanks to Michael Ellerman. * tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Increase default stack size to 32KB
-
Kent Overstreet authored
Add line breaks - inode_to_text() is now much easier to read. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
-