- 01 Aug, 2012 36 commits
-
-
KAMEZAWA Hiroyuki authored
mem_cgroup_force_empty_list() just returns 0 or -EBUSY and -EBUSY indicates 'you need to retry'. Make mem_cgroup_force_empty_list() return a bool to simplify the logic. [akpm@linux-foundation.org: rework mem_cgroup_force_empty_list()'s comment] Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
KAMEZAWA Hiroyuki authored
Signed-off-by:
-
Kamezawa Hiroyuki authored
After bf544fdc241da8 "memcg: move charges to root cgroup if use_hierarchy=0 in mem_cgroup_move_hugetlb_parent()" mem_cgroup_move_parent() returns only -EBUSY or -EINVAL. So we can remove the -ENOMEM and -EINTR checks. Signed-off-by:
Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Kamezawa Hiroyuki authored
After bf544fdc241da8 "memcg: move charges to root cgroup if use_hierarchy=0 in mem_cgroup_move_hugetlb_parent()", no memory reclaim will occur when removing a memory cgroup. If -EINTR is returned here, cgroup will show a warning. We don't need to handle any user interruption signal. Remove this. Signed-off-by:
-
Andrew Morton authored
This function is an 80-column eyesore, quite unnecessarily. Clean that up, and use standard comment layout style. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg Pearson <greg.pearson@hp.com> Cc: Tejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
David Rientjes authored
The oom killer currently schedules away from current in an uninterruptible sleep if it does not have access to memory reserves. It's possible that current was killed because it shares memory with the oom killed thread or because it was killed by the user in the interim, however. This patch only schedules away from current if it does not have a pending kill, i.e. if it does not share memory with the oom killed thread. It's possible that it will immediately retry its memory allocation and fail, but it will immediately be given access to memory reserves if it calls the oom killer again. This prevents the delay of memory freeing when threads that share memory with the oom killed thread get unnecessarily scheduled. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
-
Aneesh Kumar K.V authored
We already hold the hugetlb_lock. That should prevent a parallel cgroup rmdir from touching page's hugetlb cgroup. So remove the exclude and wakeup calls. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by:
-
Aneesh Kumar K.V authored
A page's hugetlb cgroup assignment and movement to the active list should occur with hugetlb_lock held. Otherwise when we remove the hugetlb cgroup we will iterate the active list and find pages with NULL hugetlb cgroup values. Signed-off-by:
-
Aneesh Kumar K.V authored
When we fail to allocate pages from the reserve pool, hugetlb tries to allocate huge pages using alloc_buddy_huge_page. Add these to the active list. We also need to add the huge page we allocate when we soft offline the oldpage to active list. Signed-off-by:
-
Aneesh Kumar K.V authored
Signed-off-by:
-
Aneesh Kumar K.V authored
With HugeTLB pages, hugetlb cgroup is uncharged in compound page destructor. Since we are holding a hugepage reference, we can be sure that old page won't get uncharged till the last put_page(). Signed-off-by:
-
Aneesh Kumar K.V authored
Add the control files for hugetlb controller [akpm@linux-foundation.org: s/CONFIG_CGROUP_HUGETLB_RES_CTLR/CONFIG_MEMCG_HUGETLB/g] [akpm@linux-foundation.org: s/CONFIG_MEMCG_HUGETLB/CONFIG_CGROUP_HUGETLB/] Signed-off-by:
-
Aneesh Kumar K.V authored
Add support for cgroup removal. If we don't have parent cgroup, the charges are moved to root cgroup. Signed-off-by:
-
Aneesh Kumar K.V authored
Add the charge and uncharge routines for hugetlb cgroup. We do cgroup charging in page alloc and uncharge in compound page destructor. Assigning page's hugetlb cgroup is protected by hugetlb_lock. [liwp@linux.vnet.ibm.com: add huge_page_order check to avoid incorrect uncharge] Signed-off-by:
Wanpeng Li <liwp.linux@gmail.com> Signed-off-by:
-
Aneesh Kumar K.V authored
Add the hugetlb cgroup pointer to 3rd page lru.next. This limit the usage to hugetlb cgroup to only hugepages with 3 or more normal pages. I guess that is an acceptable limitation. Signed-off-by:
-
Aneesh Kumar K.V authored
Implement a new controller that allows us to control HugeTLB allocations. The extension allows to limit the HugeTLB usage per control group and enforces the controller limit during page fault. Since HugeTLB doesn't support page reclaim, enforcing the limit at page fault time implies that, the application will get SIGBUS signal if it tries to access HugeTLB pages beyond its limit. This requires the application to know beforehand how much HugeTLB pages it would require for its use. The charge/uncharge calls will be added to HugeTLB code in later patch. Support for cgroup removal will be added in later patches. [akpm@linux-foundation.org: s/CONFIG_CGROUP_HUGETLB_RES_CTLR/CONFIG_MEMCG_HUGETLB/g] [akpm@linux-foundation.org: s/CONFIG_MEMCG_HUGETLB/CONFIG_CGROUP_HUGETLB/g] Reviewed-by:
-
Aneesh Kumar K.V authored
We will use them later in hugetlb_cgroup.c Signed-off-by:
-
Aneesh Kumar K.V authored
hugepage_activelist will be used to track currently used HugeTLB pages. We need to find the in-use HugeTLB pages to support HugeTLB cgroup removal. On cgroup removal we update the page's HugeTLB cgroup to point to parent cgroup. Signed-off-by:
-
Aneesh Kumar K.V authored
Since we migrate only one hugepage, don't use linked list for passing the page around. Directly pass the page that need to be migrated as argument. This also removes the usage of page->lru in the migrate path. Signed-off-by:
-
Aneesh Kumar K.V authored
Use a mmu_gather instead of a temporary linked list for accumulating pages when we unmap a hugepage range Signed-off-by:
-
Aneesh Kumar K.V authored
Add an inline helper and use it in the code. Signed-off-by:
-
Aneesh Kumar K.V authored
The current use of VM_FAULT_* codes with ERR_PTR requires us to ensure VM_FAULT_* values will not exceed MAX_ERRNO value. Decouple the VM_FAULT_* values from MAX_ERRNO. Signed-off-by:
Hillf Danton <dhillf@gmail.com> Acked-by:
-
Aneesh Kumar K.V authored
This patchset implements a cgroup resource controller for HugeTLB pages. The controller allows to limit the HugeTLB usage per control group and enforces the controller limit during page fault. Since HugeTLB doesn't support page reclaim, enforcing the limit at page fault time implies that, the application will get SIGBUS signal if it tries to access HugeTLB pages beyond its limit. This requires the application to know beforehand how much HugeTLB pages it would require for its use. The goal is to control how many HugeTLB pages a group of task can allocate. It can be looked at as an extension of the existing quota interface which limits the number of HugeTLB pages per hugetlbfs superblock. HPC job scheduler requires jobs to specify their resource requirements in the job file. Once their requirements can be met, job schedulers like (SLURM) will schedule the job. We need to make sure that the jobs won't consume more resources than requested. If they do we should either error out or kill the application. This patch: Rename max_hstate to hugetlb_max_hstate. We will be using this from other subsystems like hugetlb controller in later patches. Signed-off-by:
-
Wanpeng Li authored
Since per-BDI flusher threads were introduced in 2.6, the pdflush mechanism is not used any more. But the old interface exported through /proc/sys/vm/nr_pdflush_threads still exists and is obviously useless. For back-compatibility, printk warning information and return 2 to notify the users that the interface is removed. Signed-off-by:
Wanpeng Li <liwp@linux.vnet.ibm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Gavin Shan authored
Currently, function should_fail() has "bool" for its return value, so it's reasonable to change the return value of function should_fail_alloc_page() into "bool" as well. The patch does cleanup on function should_fail_alloc_page() to have "bool" for its return value. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Acked-by:
-
Huang Shijie authored
vm_stat_account() accounts the shared_vm, stack_vm and reserved_vm now. But we can also account for total_vm in the vm_stat_account() which makes the code tidy. Even for mprotect_fixup(), we can get the right result in the end. Signed-off-by:
Huang Shijie <shijie8@gmail.com> Signed-off-by:
-
Christian Ehrhardt authored
Fix of the documentation of /proc/sys/vm/page-cluster to match the behavior of the code and add some comments about what the tunable will change in that behavior. Signed-off-by:
Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Acked-by:
Jens Axboe <axboe@kernel.dk> Reviewed-by:
Minchan Kim <minchan@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Christian Ehrhardt authored
Swap readahead works fine, but the I/O to disk is almost always done in page size requests, despite the fact that readahead submits 1<<page-cluster pages at a time. On older kernels the old per device plugging behavior might have captured this and merged the requests, but currently all comes down to much more I/Os than required. On a single device this might not be an issue, but as soon as a server runs on shared san resources savin I/Os not only improves swapin throughput but also provides a lower resource utilization. With a load running KVM in a lot of memory overcommitment (the hot memory is 1.5 times the host memory) swapping throughput improves significantly and the lead feels more responsive as well as achieves more throughput. In a test setup with 16 swap disks running blocktrace on one of those disks shows the improved merging: Prior: Reads Queued: 560,888, 2,243MiB Writes Queued: 226,242, 904,968KiB Read Dispatches: 544,701, 2,243MiB Write Dispatches: 159,318, 904,968KiB Reads Requeued: 0 Writes Requeued: 0 Reads Completed: 544,716, 2,243MiB Writes Completed: 159,321, 904,980KiB Read Merges: 16,187, 64,748KiB Write Merges: 61,744, 246,976KiB IO unplugs: 149,614 Timer unplugs: 2,940 With the patch: Reads Queued: 734,315, 2,937MiB Writes Queued: 300,188, 1,200MiB Read Dispatches: 214,972, 2,937MiB Write Dispatches: 215,176, 1,200MiB Reads Requeued: 0 Writes Requeued: 0 Reads Completed: 214,971, 2,937MiB Writes Completed: 215,177, 1,200MiB Read Merges: 519,343, 2,077MiB Write Merges: 73,325, 293,300KiB IO unplugs: 337,130 Timer unplugs: 11,184 I got ~10% to ~40% more throughput in my cases and at the same time much lower cpu consumption when broken down per transferred kilobyte (the majority of that due to saved interrupts and better cache handling). In a shared SAN others might get an additional benefit as well, because this now causes less protocol overhead. Signed-off-by:
Rik van Riel <riel@redhat.com> Acked-by:
-
Kamezawa Hiroyuki authored
There are no users since commit b2402857 ("memcg: remove PCG_CACHE"). Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Kamezawa Hiroyuki authored
Now, in memcg, 2 "MAPPED" enum/macro are found MEM_CGROUP_CHARGE_TYPE_MAPPED MEM_CGROUP_STAT_FILE_MAPPED Thier names looks similar to each other but the former is used for accounting anonymous memory. rename it as TYPE_ANON. Signed-off-by:
-
Kamezawa Hiroyuki authored
MEM_CGROUP_STAT_SWAPOUT represents the usage of swap rather than the number of swap-out events. Rename it to be MEM_CGROUP_STAT_SWAP. Signed-off-by:
-
Jan Kara authored
If someone calls vb_alloc() (or vm_map_ram() for that matter) to allocate 0 bytes (0 pages), get_order() returns BITS_PER_LONG - PAGE_CACHE_SHIFT and interesting stuff happens. So make debugging such problems easier and warn about 0-size allocation. [akpm@linux-foundation.org: use WARN_ON-return-value feature] Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Hong zhi guo authored
There's a walk by repeating rb_next to find a suitable hole. Could be simply replaced by walk on the sorted vmap_area_list. More simpler and efficient. Mutation of the list and tree only happens in pair within __insert_vmap_area and __free_vmap_area, under protection of vmap_area_lock. The patch code is also under vmap_area_lock, so the list walk is safe, and consistent with the tree walk. Tested on SMP by repeating batch of vmalloc anf vfree for random sizes and rounds for hours. Signed-off-by:
Hong Zhiguo <honkiko@gmail.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Andrew Morton authored
Fix zillions of these: drivers/media/video/v4l2-ioctl.c:1848: error: unknown field 'func' specified in initializer drivers/media/video/v4l2-ioctl.c:1848: warning: missing braces around initializer drivers/media/video/v4l2-ioctl.c:1848: warning: (near initialization for 'v4l2_ioctls[0].<anonymous>') drivers/media/video/v4l2-ioctl.c:1848: warning: initialization makes integer from pointer without a cast drivers/media/video/v4l2-ioctl.c:1848: error: initializer element is not computable at load time drivers/media/video/v4l2-ioctl.c:1848: error: (near initialization for 'v4l2_ioctls[0].<anonymous>.offset') Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
-
Fengguang Wu authored
This will fix build errors: block/blk-cgroup.c:609:2: error: unknown type name 'atomic64_t' block/blk-cgroup.c:609:2: error: implicit declaration of function 'ATOMIC64_INIT' [-Werror=implicit-function-declaration] Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by:
-
Akinobu Mita authored
"fault-injection: add tool to run command with failslab or fail_page_alloc" added tools/testing/fault-injection/failcmd.sh to make it easier to inject slab/page allocation failures by fault injection. failcmd.sh prints the following warning when running with arguments for command. # ./failcmd.sh echo aaa failcmd.sh: line 209: [: echo: binary operator expected aaa This warning is caused by an improper check whether at least one parameter is left after parsing command options. Fix it by testing the length of $1 instead of $@ Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
- 31 Jul, 2012 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linuxLinus Torvalds authored
Pull writeback updates from Wu Fengguang: "Use time based periods to age the writeback proportions, which can adapt equally well to fast/slow devices." Fix up trivial conflict in comment in fs/sync.c * tag 'writeback-proportions' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: Fix some comment errors block: Convert BDI proportion calculations to flexible proportions lib: Fix possible deadlock in flexible proportion code lib: Proportions with flexible period
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Features include: - More preparatory patches for modularising NFSv2/v3/v4. Split out the various NFSv2/v3/v4-specific code into separate files - More preparation for the NFSv4 migration code - Ensure that OPEN(O_CREATE) observes the pNFS mds threshold parameters - pNFS fast failover when the data servers are down - Various cleanups and debugging patches" * tag 'nfs-for-3.6-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (67 commits) nfs: fix fl_type tests in NFSv4 code NFS: fix pnfs regression with directio writes NFS: fix pnfs regression with directio reads sunrpc: clnt: Add missing braces nfs: fix stub return type warnings NFS: exit_nfs_v4() shouldn't be an __exit function SUNRPC: Add a missing spin_unlock to gss_mech_list_pseudoflavors NFS: Split out NFS v4 client functions NFS: Split out the NFS v4 filesystem types NFS: Create a single nfs_clone_super() function NFS: Split out NFS v4 server creating code NFS: Initialize the NFS v4 client from init_nfs_v4() NFS: Move the v4 getroot code to nfs4getroot.c NFS: Split out NFS v4 file operations NFS: Initialize v4 sysctls from nfs_init_v4() NFS: Create an init_nfs_v4() function NFS: Split out NFS v4 inode operations NFS: Split out NFS v3 inode operations NFS: Split out NFS v2 inode operations NFS: Clean up nfs4_proc_setclientid() and friends ... -
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6Linus Torvalds authored
Pull MFD fix from Samuel Ortiz: "This one fixes an s5m8767 regulator build breakage due to a merge conflict caused by the MFD s5m API changes." * tag 'mfd-for-linus-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: regulator: Fix an s5m8767 build failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media updates from Mauro Carvalho Chehab: "This is the first part of the media patches for v3.6. This patch series contain: - new DVB frontend: rtl2832 - new video drivers: adv7393 - some unused files got removed - a selection API cleanup between V4L2 and V4L2 subdev API's - a major redesign at v4l-ioctl2, in order to clean it up - several driver fixes and improvements." * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (174 commits) v4l: Export v4l2-common.h in include/linux/Kbuild media: Revert "[media] Terratec Cinergy S2 USB HD Rev.2" [media] media: Use pr_info not homegrown pr_reg macro [media] Terratec Cinergy S2 USB HD Rev.2 [media] v4l: Correct conflicting V4L2 subdev selection API documentation [media] Feature removal: V4L2 selections API target and flag definitions [media] v4l: Unify selection flags documentation [media] v4l: Unify selection flags [media] v4l: Common documentation for selection targets [media] v4l: Unify selection targets across V4L2 and V4L2 subdev interfaces [media] v4l: Remove "_ACTUAL" from subdev selection API target definition names [media] V4L: Remove "_ACTIVE" from the selection target name definitions [media] media: dvb-usb: print mac address via native %pM [media] s5p-tv: Use module_i2c_driver in sii9234_drv.c file [media] media: gpio-ir-recv: add allowed_protos for platform data [media] s5p-jpeg: Use module_platform_driver in jpeg-core.c file [media] saa7134: fix spelling of detach in label [media] cx88-blackbird: replace ioctl by unlocked_ioctl [media] cx88: don't use current_norm [media] cx88: fix a number of v4l2-compliance violations ...
-
