- 26 Sep, 2024 1 commit
-
-
Frank Min authored
Without setting dcc bit, there is ramdon PTE copy corruption on sdma 7. so add this bit and update the packet format accordingly. Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Frank Min <Frank.Min@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
- 25 Sep, 2024 7 commits
-
-
Sreekant Somasekharan authored
program SDMAx_QUEUEx_SCHEDULE_CNTL for context switch due to quantum in KFD for GFX12. Signed-off-by:
Sreekant Somasekharan <sreekant.somasekharan@amd.com> Reviewed-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by:
-
Saleemkhan Jamadar authored
v1 - remove cs parse code (Christian) On VCN v4_0_6 AV1 is supported on both the instances. Remove cs IB parse code since explict handling of AV1 schedule is not required. Signed-off-by:
Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
Mukul Joshi authored
Make CU occupancy calculations work on GFX 9.4.3 by updating the logic to handle multiple XCCs correctly. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
-
Mukul Joshi authored
Currently, the code uses the IH_VMID_X_LUT register to map a queue's vmid to the corresponding PASID. This logic is racy since CP can update the VMID-PASID mapping anytime especially when there are more processes than number of vmids. Update the logic to calculate CU occupancy by matching doorbell offset of the queue with valid wave counts against the process's queues. Signed-off-by:
-
ZhenGuo Yin authored
VF FLR will be triggered by host driver before job timeout, hence the error status of GPU get cleared. Performing a coredump here is unnecessary. Signed-off-by:
ZhenGuo Yin <zhenguo.yin@amd.com> Acked-by:
-
Christian König authored
This patch tries to solve the basic problem we also need to sync to the KFD fences of the BO because otherwise it can be that we clear PTEs while the KFD queues are still running. Signed-off-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
-
Jack Xiao authored
enable_level_process_quantum_check is requried to enable process quantum based scheduling. Signed-off-by:
Jack Xiao <Jack.Xiao@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
- 18 Sep, 2024 32 commits
-
-
Alex Deucher authored
The firmware timeout is 2s. Reduce the driver timeout to 2.1 seconds to avoid back pressure on queue submissions. Fixes: 94b51a3d ("drm/amdgpu/mes12: increase mes submission timeout") Acked-by:
-
Alex Deucher authored
The firmware timeout is 2s. Reduce the driver timeout to 2.1 seconds to avoid back pressure on queue submissions. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3627 Fixes: f7c161a4 ("drm/amdgpu: increase mes submission timeout") Acked-by:
-
Christian König authored
Instead of a TTM reference grab a GEM reference whenever necessary. v2: fix typo in amdgpu_bo_unref pointed out by Vitaly, initialize the GEM funcs for kernel allocations as well. Signed-off-by: -
Mario Limonciello authored
The issue with panel power savings compatibility below `AMDGPU_DM_DEFAULT_MIN_BACKLIGHT` happens at `AMDGPU_DM_DEFAULT_MIN_BACKLIGHT` as well. That issue will be fixed separately, so don't prevent the backlight brightness from going that low. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/amd-gfx/be04226a-a9e3-4a45-a83b-6d263c6557d8@t-8ch.de/T/#m400dee4e2fc61fe9470334d20a7c8c89c9aef44fReviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
Correct the parameter descriptor for the function `dc_process_dmub_dpia_set_tps_notification` to match the actual parameters used. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:5768: warning: Function parameter or struct member 'tps' not described in 'dc_process_dmub_dpia_set_tps_notification' drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:5768: warning: Excess function parameter 'ts' description in 'dc_process_dmub_dpia_set_tps_notification' Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
-
Frank Min authored
update golden regs for gfx12 Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
-
Alex Deucher authored
After splitting the logic between APU and dGPU, clean up some of the APU and dGPU specific logic that no longer applied. Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Tobias Jakobi authored
As set_drr() is called from IRQ context, it can happen that the pipe context has been nulled by dc_state_destruct(). Apply the same protection here that is already present for dcn35_set_drr() and dcn10_set_drr(). I.e. fetch the tg pointer first (to avoid a race with dc_state_destruct()), and then check the local copy before using it. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142 Fixes: 06ad7e16 ("drm/amd/display: Destroy DC context while keeping DML and DML2") Acked-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
-
Alex Deucher authored
We need some different logic for dGPUs and the APU path can be simplified because there are some methods which are never used on APUs. This also fixes a regression on some older APUs causing the driver to fetch the unpatched ROM image rather than the patched image. Fixes: 9c081c11 ("drm/amdgpu: Reorder to read EFI exported ROM first") Reviewed-by:
George Zhang <George.zhang@amd.com> Signed-off-by:
-
Christian König authored
We haven't used the functionality to pin BOs in a certain range at all while the driver existed. Just nuke it. Signed-off-by:
-
Christian König authored
Instead of having that in the amdgpu_bo_pin() function applied for all pinned BOs. Signed-off-by:
-
Lijo Lazar authored
Fix instance mask calculation for VCN IP. There are cases where VCN instance could be shared across partitions. Fix here so that other blocks don't need to check for any shared instances based on partition mode. Signed-off-by:
Asad Kamal <asad.kamal@amd.com> Signed-off-by:
-
Asad Kamal authored
Fix get each xcp macro to loop over each partition correctly Fixes: 4bdca205 ("drm/amdgpu: Add utility functions for xcp") Signed-off-by:
-
Aric Cyr authored
- Clear cached watermark after resume - Update IPS default mode for DCN35/DCN351 - Use full update for swizzle mode change - Skip to enable dsc if it has been off - Fix underflow when setting underscan on DCN401 - Remove always-false branches - Check null pointer before dereferencing se Acked-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Signed-off-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Charlene Liu authored
[WHY] Driver could skip program watermarks when resume from S0i3/S4. [HOW] Clear the cached one first to make sure new value gets applied. Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Reviewed-by:
Roman Li <roman.li@amd.com> Signed-off-by:
Charlene Liu <Charlene.Liu@amd.com> Signed-off-by:
-
Roman Li authored
[WHY] RCG state of IPX in idle is more stable for DCN351 and some variants of DCN35 than IPS2. [HOW] Rework dm_get_default_ips_mode() to specify default per ASIC and update DCN35/DCN351 defaults accordingly. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Sun peng Li <sunpeng.li@amd.com> Signed-off-by:
-
Mario Limonciello authored
Currently amdgpu takes backlight caps provided by the ACPI tables on systems as is. If the firmware sets maximums that are too low this means that users don't get a good experience. To avoid having to maintain a quirk list of such systems, do a sanity check on the values. Check that the spread is at least half of the values that amdgpu would use if no ACPI table was found and if not use the amdgpu defaults. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3020Reviewed-by:
-
Charlene Liu authored
[WHY & HOW] 1) We did linear/non linear transition properly long ago 2) We used that path to handle SystemDisplayEnable 3) We fixed a SystemDisplayEnable inability to fallback to passive by impacting the transition flow generically 4) AFMF later relied on the generic transition behavior Separating the two flows to make (3) non-generic is the best immediate coarse of action. DC can discern SSAMPO3 very easily from SDE. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Chris Park <chris.park@amd.com> Signed-off-by:
-
Zhikai Zhai authored
[WHY] It makes DSC enable when we commit the stream which need keep power off, and then it will skip to disable DSC if pipe reset at this situation as power has been off. It may cause the DSC unexpected enable on the pipe with the next new stream which doesn't support DSC. [HOW] Check the DSC used on current pipe status when update stream. Skip to enable if it has been off. The operation enable DSC should happen when set power on. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Signed-off-by:
Zhikai Zhai <zhikai.zhai@amd.com> Signed-off-by:
-
Aurabindo Pillai authored
[WHY & HOW] When underscan is set through xrandr, it causes the stream destination rect to change in a way it becomes complicated to handle the calculations for subvp. Since this is a corner case, disable subvp when underscan is set. Fix the existing check that is supposed to catch this corner case by adding a check based on the parameters in the stream Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Dillon Varone <dillon.varone@amd.com> Reviewed-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Alex Hung authored
[WHAT & HOW] req128_c is always set to false and its branch is never taken. Similarly, MacroTileSizeBytes is set to either 256 or 65535 and it is never 4096 and it's branch is not taken. Therefore, their branches are removed. This fixes 3 DEADCODE issues reported by Coverity. Acked-by:
-
Alex Hung authored
[WHAT & HOW] se is null checked previously in the same function, indicating it might be null; therefore, it must be checked when used again. This fixes 1 FORWARD_NULL issue reported by Coverity. Acked-by:
-
Aric Cyr authored
- Add HDMI DSC native YCbCr422 support - Add fullscreen only sharpening policy - Restructure dpia link training - Disable SYMCLK32_LE root clock gating - Clean up dsc blocks in accelerated mode - Block dynamic IPS2 on DCN35 for incompatible FW versions - Add debug options to change sharpen policies - Block timing sync for different output formats in pmo - Enable DML2 override_det_buffer_size_kbytes - Add dmub hpd sense callback - Emulate Display Hotplug Hang - Implement new DPCD register handling - Use SDR white level to calculate matrix coefficients - Round calculated vtotal Reviewed-by:
-
Leo Ma authored
[WHY && HOW] For some HDMI OVT timing, YCbCr422 encoding fails at the DSC bandwidth check. The root cause is our DSC policy for timing doesn't account for HDMI YCbCr422 native support. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Leo Ma <hanghong.ma@amd.com> Signed-off-by:
-
Relja Vojvodic authored
[WHAT & HOW] Disable sharpening if not in fullscreen if this policy is selected Reviewed-by:
Samson Tam <samson.tam@amd.com> Signed-off-by:
Relja Vojvodic <Relja.Vojvodic@amd.com> Signed-off-by:
-
Peichen Huang authored
[WHY] We intend to consolidate dp tunneling and conventional dp link training. [HOW] 1. Use the same link training entry for both dp and dpia 2. Move SET_CONFIG of non-transparent mode to dmub side 3. Add set_tps_notification dmub_cmd to notify tps request for non-transparent dpia link training 4. Check dpcd request result and abort link training early if dpia aux tunneling fails 5. Add option to avoid affect old product 6. Separately handle wait_time_microsec for dpia Reviewed-by:
Cruise Hung <cruise.hung@amd.com> Reviewed-by:
George Shen <george.shen@amd.com> Reviewed-by:
Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by:
Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by:
-
Sung Joon Kim authored
[WHY & HOW] On display on sequence, enabling SYMCLK32_LE root clock gating causes issue in link training so disabling it is needed. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Sung Joon Kim <Sungjoon.Kim@amd.com> Signed-off-by:
-
Martin Tsai authored
[WHY] DSC on eDP could be enabled during VBIOS post. The enabled DSC may not be disabled when enter to OS, once the system was in second screen only mode before entering to S4. In this case, OS will not send setTimings to reset eDP path again. The enabled DSC HW will make a new stream without DSC cannot output normally if it reused this pipe with enabled DSC. [HOW] In accelerated mode, to clean up DSC blocks if eDP is on link but not active when we are not in fast boot and seamless boot. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Martin Tsai <martin.tsai@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[WHY] Hangs with Z8 can occur if running an older unfixed PMFW version. [HOW] Fallback to RCG only for dynamic IPS2 states if it's not newer than 93.12. Limit to DCN35. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Samson Tam authored
[WHY] Add options to change sharpen policy based on surface format and scaling ratios. [HOW] Add sharpen_policy to change policy based on surface format and scale_to_sharpness_policy based on scaling ratios. Reviewed-by:
Jun Lei <jun.lei@amd.com> Signed-off-by:
-
Dillon Varone authored
[WHY & HOW] If the output format is different for HDMI TMDS signals, they are not synchronizable. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
-
Yihan Zhu authored
[WHY] Corrupted screen will be observed when 4k144 DP/HDMI display and 4k144 eDP are connected, changing eDP refresh rate from 60Hz to 144Hz. [HOW] override_det_buffer_size_kbytes should be true for DCN35/DCN351. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by:
-
