- 05 Nov, 2019 23 commits
-
-
Janusz Krzysztofik authored
Commit a8fa5507 ("media: v4l2-subdev: Verify arguments in v4l2_subdev_call()") and commit 374d62e7 ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument") introduced a few local functions, unfortunately with arguments of type __u32, reserved for use in Linux uAPI. Use u32 instead. Suggested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
Seung-Woo Kim authored
>From isp_video_release(), &isp->video_lock is held and subsequent vb2_fop_release() tries to lock vdev->lock which is same with the previous one. Replace vb2_fop_release() with _vb2_fop_release() to fix the recursive locking. Fixes: 1380f575 ("[media] videobuf2: Add missing lock held on vb2_fop_release") Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Kangjie Lu authored
"f->fmt.sdr.reserved" is uninitialized. As other peer drivers like msi2500 and airspy do, the fix initializes it to avoid memory disclosures. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Biju Das authored
Add the MIPI CSI-2 driver support for RZ/G2N(R8A774B1) SoC. The CSI-2 module of RZ/G2N is similar to R-Car M3-N. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
-
Biju Das authored
Add the SoC specific information for RZ/G2N(R8A774B1) SoC. The VIN module of RZ/G2N is similar to R-Car M3-N. Signed-off-by:
-
Biju Das authored
Add the compatible string for RZ/G2N (R8A774B1) to the list of supported SoCs. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Biju Das authored
Document support for the VIN module in the Renesas RZ/G2N (R8A774B1) SoC. Signed-off-by:
-
Niklas Söderlund authored
Most Gen3 boards can output frames in NV12 format, add support for this with a runtime check that the running hardware supports it. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Niklas Söderlund authored
Most but not all Gen3 hardware support outputting NV12, add a flag to indicate which SoCs do support it. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Niklas Söderlund authored
If a pixel format is not supported by the hardware NULL is returned by rvin_format_from_pixel() for that fourcc. Verify that the pixel format is supported using this or skip it when enumerating. Signed-off-by:
-
Johan Hovold authored
If a process is interrupted while accessing the radio device and the core lock is contended, release() could return early and fail to update the interrupt mask. Note that the return value of the v4l2 release file operation is ignored. Fixes: 87d1a50c ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver") Cc: stable <stable@vger.kernel.org> # 2.6.38 Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
If a process is interrupted while accessing the video device and the device lock is contended, release() could return early and fail to free related resources. Note that the return value of the v4l2 release file operation is ignored. Fixes: 28ffeebb ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework") Cc: stable <stable@vger.kernel.org> # 4.2 Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
zhong jiang authored
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the array input_vals on the stack but instead make it static. Makes the object code smaller by 106 bytes. Before: text data bss dec hex filename 11744 3536 128 15408 3c30 drivers/media/i2c/vpx3220.o After: text data bss dec hex filename 11574 3600 128 15302 3bc6 drivers/media/i2c/vpx3220.o (gcc version 9.2.1, amd64) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Chris Paterson authored
Ramesh is now using a new email address. Update the maintainer entry for the MAX2175 SDR tuner and the Renesas R-Car DRIF drivers. Signed-off-by:
Chris Paterson <chris.paterson2@renesas.com> Acked-by:
Ramesh Shanmugasundaram <rashanmu@gmail.com> Signed-off-by:
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header files related to Video drivers for Xilinx devices. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the array 'registers' on the stack but instead make it static const. Makes the object code smaller by 10 bytes. Before: text data bss dec hex filename 20138 5196 128 25462 6376 staging/media/imx/imx7-mipi-csis.o After: text data bss dec hex filename 20032 5292 128 25452 636c staging/media/imx/imx7-mipi-csis.o (gcc version 9.2.1, amd64) Signed-off-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Colin Ian King authored
Variable status is being initialized with a value that is never read and is being re-assigned a later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Dan Carpenter authored
We added two new error paths to smiapp_start_streaming(), but we can't return directly without dropping the "sensor->mutex" lock. Fixes: f8c4352c ("media: smiapp: Move binning configuration to streaming start") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Bingbu Cao authored
Currently, we can build ipu3 driver code without any warnings with W=1, so the extra compiler flags in Makefile and the item in TODO file can be removed. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Bingbu Cao authored
The data type conversion of the IEFD CU inputs in ipu3 uapi is ambiguities, add some clarification to help user to understand this conversion. Signed-off-by:
-
Bingbu Cao authored
This patch add more details for the resolution change blocks It can help the developer to understand the main resolution change blocks in ImgU. [sakari.ailus@linux.intel.com: Add new files to MAINTAINERS] Signed-off-by:
-
- 24 Oct, 2019 17 commits
-
-
Jernej Skrabec authored
Allwinner H3 SoC contains deinterlace unit, which has several modes of operation - bypass, weave, bob and mixed (advanced) mode. I don't know how mixed mode works, but according to Allwinner it gives best results, so they use it exclusively. Currently this mode is also hardcoded here. For each interleaved frame queued, this driver produces 2 deinterlaced frames. Deinterlaced frames are based on 2 consequtive output buffers, except for the first 2, where same output buffer is given to peripheral as current and previous. There is no documentation for this core, so register layout and fixed values were taken from BSP driver. I'm not sure if maximum size of the image unit is capable to process is governed by size of "flag" buffers, frequency or it really is some HW limitation. Currently driver can process full HD image in ~15ms (7.5ms for each capture buffer), which allows to process 1920x1080@60i video smoothly in real time. Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> [hverkuil-cisco@xs4all.nl: add static to deinterlace_ioctl_ops] Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Jernej Skrabec authored
Allwinner H3 Deinterlace core is used for deinterlacing interlaced video content. Core can also be found on some later SoCs, like H5 and R40. Acked-by:
-
Arthur Moraes do Lago authored
Add mean window size parameter for debayer filter as a control in vimc-debayer. vimc-debayer was patched to allow changing mean window parameter of the filter without needing to reload the driver. The parameter can now be set using a v4l2-ctl control(mean_window_size). Co-developed-by:
Laís Pessine do Carmo <laispc19@gmail.com> Signed-off-by:
Arthur Moraes do Lago <arthurmoraeslago@gmail.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Dafna Hirschfeld authored
Since the 'struct device *dev' field exists in each of the entity structs, it can be moved to the common struct vimc_ent_devevice. It is then used to replace 'pr_err' with 'dev_err' in the streamer code. Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by:
-
Dafna Hirschfeld authored
since the pads array is of known small size, there is no reason to allocate it separately. Instead, it is embedded in the entity struct. This also conforms to the media controller doc: 'Most drivers will embed the pads array in a driver-specific structure, avoiding dynamic allocation.' Signed-off-by:
-
Dafna Hirschfeld authored
the struct vimc_platform_data is not used anymore and can be removed. Signed-off-by:
-
Dafna Hirschfeld authored
The function 'vimc_pipeline_s_stream' is not used and can be removed. Signed-off-by:
-
Dafna Hirschfeld authored
vimc is a single kernel module and does not need to export any symbols therefore there is no need for these declarations. Signed-off-by:
-
Dafna Hirschfeld authored
since this function only calls v4l2_device_unregister_subdev, it is pointless. Signed-off-by:
-
Dafna Hirschfeld authored
according to the docs, this function must be called during the cleanup phase after unregistering the entity. Signed-off-by:
-
Dafna Hirschfeld authored
vimc_sen_add function first registers the subdevice and then calls tpg_alloc. If tpg_alloc fails it unregisters the subdevice and then frees vsen, this cause double free since the release callback that follows subdevice unregistration also frees vsen. Signed-off-by:
-
Dafna Hirschfeld authored
Since the add callback returns NULL on failure and the array is initialized to NULLs, there is no need for the intermediate assignment to local var. Signed-off-by:
-
Dafna Hirschfeld authored
since NULL value for vimc entity pointer indicates that entity creation failed and this is tested, the pointers should be initialized to NULL. Signed-off-by:
-
Sean Young authored
The touch timer is set up in intf1. If the second interface does not exist, the timer and touch input device are not setup and we get the following error, when touch events are reported via intf0. kernel BUG at kernel/time/timer.c:956! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc1+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__mod_timer kernel/time/timer.c:956 [inline] RIP: 0010:__mod_timer kernel/time/timer.c:949 [inline] RIP: 0010:mod_timer+0x5a2/0xb50 kernel/time/timer.c:1100 Code: 45 10 c7 44 24 14 ff ff ff ff 48 89 44 24 08 48 8d 45 20 48 c7 44 24 18 00 00 00 00 48 89 04 24 e9 5a fc ff ff e8 ae ce 0e 00 <0f> 0b e8 a7 ce 0e 00 4c 89 74 24 20 e9 37 fe ff ff e8 98 ce 0e 00 RSP: 0018:ffff8881db209930 EFLAGS: 00010006 RAX: ffffffff86c2b200 RBX: 00000000ffffa688 RCX: ffffffff83efc583 RDX: 0000000000000100 RSI: ffffffff812f4d82 RDI: ffff8881d2356200 RBP: ffff8881d23561e8 R08: ffffffff86c2b200 R09: ffffed103a46abeb R10: ffffed103a46abea R11: ffff8881d2355f53 R12: dffffc0000000000 R13: 1ffff1103b64132d R14: ffff8881d2355f50 R15: 0000000000000006 FS: 0000000000000000(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f75e2799000 CR3: 00000001d3b07000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> imon_touch_event drivers/media/rc/imon.c:1348 [inline] imon_incoming_packet.isra.0+0x2546/0x2f10 drivers/media/rc/imon.c:1603 usb_rx_callback_intf0+0x151/0x1e0 drivers/media/rc/imon.c:1734 __usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1654 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1719 dummy_timer+0x120f/0x2fa2 drivers/usb/gadget/udc/dummy_hcd.c:1965 call_timer_fn+0x179/0x650 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5e3/0x1490 kernel/time/timer.c:1786 __do_softirq+0x221/0x912 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x12f/0x500 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 </IRQ> RIP: 0010:default_idle+0x28/0x2e0 arch/x86/kernel/process.c:581 Code: 90 90 41 56 41 55 65 44 8b 2d 44 3a 8f 7a 41 54 55 53 0f 1f 44 00 00 e8 36 ee d0 fb e9 07 00 00 00 0f 00 2d fa dd 4f 00 fb f4 <65> 44 8b 2d 20 3a 8f 7a 0f 1f 44 00 00 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffffff86c07da8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000007 RBX: ffffffff86c2b200 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffffff86c2ba4c RBP: fffffbfff0d85640 R08: ffffffff86c2b200 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x3b6/0x500 kernel/sched/idle.c:263 cpu_startup_entry+0x14/0x20 kernel/sched/idle.c:355 start_kernel+0x82a/0x864 init/main.c:784 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 Modules linked in: Reported-by: syzbot+f49d12d34f2321cf4df2@syzkaller.appspotmail.com Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Nishad Kamdar authored
This patch corrects the SPDX License Identifier style in header file related to media Drivers for Analog TV Tuners. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by:
-
Sakari Ailus authored
Rename the confusingly named smiapp_update_mode() function as smiapp_pll_blanking_update(). The function is used to calculate new PLL and blanking configuration after binning or scaling configuration has been changed. Signed-off-by:
-
Sakari Ailus authored
Earlier it was possible that the parts of the driver that assumed runtime PM was enabled were being called before runtime PM was enabled in the driver's probe function. So enable runtime PM before registering the sub-device. Signed-off-by:
-
