Pull RTC updates from Alexandre Belloni:
 "New drivers:
   - Microchip PolarFire
   - Nuvoton NCT3018Y
   - TI K3 RTC

  Subsystem:
   - Replace flush_scheduled_work() with flush_work()
   - Remove deprecated ida_simple_get()/ida_simple_remove() calls

  Drivers:
   - use simple i2c probe where possible
   - sun6i: add R329 support
   - zynqmp: add calibration support
   - vr41xx: remove unused driver"

* tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
  rtc: spear: set range max
  rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
  rtc: zynqmp: initialize fract_tick
  rtc: Add NCT3018Y real time clock driver
  dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock
  dt-bindings: rtc: nxp,pcf85063: Convert to DT schema
  dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt'
  rtc: rx8025: fix 12/24 hour mode detection on RX-8035
  rtc: cros-ec: Only warn once in .remove() about notifier_chain problems
  rtc: vr41xx: remove driver
  rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler()
  rtc: rv8803: fix missing unlock on error in rv8803_set_time()
  rtc: zynqmp: Add calibration set and get support
  rtc: zynqmp: Updated calibration value
  dt-bindings: rtc: zynqmp: Add clock information
  rtc: sun6i: add support for R329 RTC
  rtc: Directly use ida_alloc()/free()
  rtc: Introduce ti-k3-rtc
  dt-bindings: rtc: Add TI K3 RTC description
  dt-bindings: rtc: qcom-pm8xxx-rtc: Update the maintainers section
  ...

Pull sound fixes from Takashi Iwai:
 "Includes a few usual updates for HD- and USB-audio and a trivial
  cleanup patch"

* tag 'sound-fix-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda: Fix crash due to jack poll in suspend
  ALSA: hda/cirrus - support for iMac 12,1 model
  ALSA: usb-audio: make read-only array marker static const
  ALSA: hda/realtek: Add a quirk for HP OMEN 15 (8786) mute LED
  ALSA: usb-audio: More comprehensive mixer map for ASUS ROG Zenith II
  ALSA: scarlett2: Add Focusrite Clarett+ 8Pre support
  ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model
  ALSA: ice1712: remove redundant assignment to new
  ALSA: hda/realtek: Add quirk for another Asus K42JZ model

Pull virtio updates from Michael Tsirkin:

 - A huge patchset supporting vq resize using the new vq reset
   capability

 - Features, fixes, and cleanups all over the place

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
  vdpa/mlx5: Fix possible uninitialized return value
  vdpa_sim_blk: add support for discard and write-zeroes
  vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
  vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
  vdpa_sim_blk: check if sector is 0 for commands other than read or write
  vdpa_sim: Implement suspend vdpa op
  vhost-vdpa: uAPI to suspend the device
  vhost-vdpa: introduce SUSPEND backend feature bit
  vdpa: Add suspend operation
  virtio-blk: Avoid use-after-free on suspend/resume
  virtio_vdpa: support the arg sizes of find_vqs()
  vhost-vdpa: Call ida_simple_remove() when failed
  vDPA: fix 'cast to restricted le16' warnings in vdpa.c
  vDPA: !FEATURES_OK should not block querying device config space
  vDPA/ifcvf: support userspace to query features and MQ of a management device
  vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
  vhost scsi: Allow user to control num virtqueues
  vhost-scsi: Fix max number of virtqueues
  vdpa/mlx5: Support different address spaces for control and data
  vdpa/mlx5: Implement susupend virtqueue callback
  ...

Merge tag 'loongarch-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Optimise getcpu() with vDSO

 - PCI enablement on top of pci & irqchip changes

 - Stack unwinder and stack trace support

 - Some bug fixes and build error fixes

 - Update the default config file

* tag 'loongarch-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  docs/zh_CN/LoongArch: Add I14 description
  docs/LoongArch: Add I14 description
  LoongArch: Update Loongson-3 default config file
  LoongArch: Add USER_STACKTRACE support
  LoongArch: Add STACKTRACE support
  LoongArch: Add prologue unwinder support
  LoongArch: Add guess unwinder support
  LoongArch: Add vDSO syscall __vdso_getcpu()
  LoongArch: Add PCI controller support
  LoongArch: Parse MADT to get multi-processor information
  LoongArch: Jump to the link address before enable PG
  LoongArch: Requires __force attributes for any casts
  LoongArch: Fix unsigned comparison with less than zero
  LoongArch: Adjust arch/loongarch/Kconfig
  LoongArch: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK

Pull power supply and reset updates from Sebastian Reichel:
 "No core patches, only driver updates:

   - pwr-mlxbf: new reset driver for Mellanox BlueField

   - at91-reset: SAMA7G5 support

   - ab8500: continue refurbishing

   - misc minor fixes"

* tag 'for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits)
  power: supply: olpc_battery: Hold the reference returned by of_find_compatible_node
  power: supply: ab8500: add missing destroy_workqueue in ab8500_charger_bind
  power: supply: ab8500: Remove flush_scheduled_work() call.
  power: supply: ab8500_fg: drop duplicated 'is' in comment
  power: supply: ab8500: Drop external charger leftovers
  power: supply: ab8500: Add MAINTAINERS entry
  dt-bindings: power: reset: qcom,pshold: convert to dtschema
  power: supply: Fix typo in power_supply_check_supplies
  power: reset: pwr-mlxbf: change rst_pwr_hid and low_pwr_hid from global to local variables
  power: reset: pwr-mlxbf: add missing include
  power: reset: at91-reset: add support for SAMA7G5
  power: reset: at91-reset: add reset_controller_dev support
  power: reset: at91-reset: add at91_reset_data
  power: reset: at91-reset: document structures and enums
  dt-bindings: reset: add sama7g5 definitions
  dt-bindings: reset: atmel,at91sam9260-reset: add sama7g5 bindings
  dt-bindings: reset: convert Atmel/Microchip reset controller to YAML
  power: reset: pwr-mlxbf: add BlueField SoC power control driver
  power: supply: ab8500: Exit maintenance if too low voltage
  power: supply: ab8500: Respect charge_restart_voltage_uv
  ...

Pull another VFIO update from Alex Williamson:

 - Rename vfio source file to more easily allow additional source
   files in the upcoming development cycles (Jason Gunthorpe)

* tag 'vfio-v6.0-rc1pt2' of https://github.com/awilliam/linux-vfio:
  vfio: Move vfio.c to vfio_main.c

Commit 36d4b36b ("lib/nodemask: inline next_node_in() and
node_random()") removed the lib/nodemask.c file, but the remove didn't
happen when the patch was applied.
Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I14 is also a kind of immediate operand in instruction, like I8/I12/I16/
I21/I26, add it in the Chinese documentation.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

I14 is also a kind of immediate operand in instruction, like I8/I12/I16/
I21/I26, add it in the English documentation.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

1, Add NVME related options;
2, Add compressed firmware support;
3, Add virtio drivers in order to run in qemu.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

To get the best stacktrace output, you can compile your userspace
programs with frame pointers (at least glibc + the app you are tracing).

1, export "CC = gcc -fno-omit-frame-pointer";
2, compile your programs with "CC";
3, use uprobe to get stacktrace output.

...
     echo 'p:malloc /usr/lib64/libc.so.6:0x0a4704 size=%r4:u64' > uprobe_events
     echo 'p:free /usr/lib64/libc.so.6:0x0a4d50 ptr=%r4:x64' >> uprobe_events
     echo 'comm == "demo"' > ./events/uprobes/malloc/filter
     echo 'comm == "demo"' > ./events/uprobes/free/filter
     echo 1 > ./options/userstacktrace
     echo 1 > ./options/sym-userobj
...
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

1. Use common arch_stack_walk() infrastructure to avoid duplicated code
   and avoid taking care of the stack storage and filtering.
2. Add sched_ra (means sched return address) and sched_cfa (means sched
   call frame address) to thread_info, and store them in switch_to().
3. Add __get_wchan() implementation.

Now we can print the process stack and wait channel by cat /proc/*/stack
and /proc/*/wchan.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

It unwind the stack frame based on prologue code analyze.
CONFIG_KALLSYMS is needed, at least the address and length
of each function.

Three stages when we do unwind,
  1) unwind_start(), the prapare of unwinding, fill unwind_state.
  2) unwind_done(), judge whether the unwind process is finished or not.
  3) unwind_next_frame(), unwind the next frame.

Dividing unwinder helps to add new unwinders in the future, e.g.:
unwinder_frame, unwinder_orc, .etc.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Name "guess unwinder" comes from x86, it scans the stack and reports
every kernel text address it finds.

Unwinders can be used by dump_stack() and other stacktrace functions.

Three stages when we do unwind,
  1) unwind_start(), the prapare of unwinding, fill unwind_state.
  2) unwind_done(), judge whether the unwind process is finished or not.
  3) unwind_next_frame(), unwind the next frame.

Add get_stack_info() to get stack info. At present we have irq stack and
task stack. The next_sp is the key info between two types of stacks.

Dividing unwinder helps to add new unwinders in the future.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

We test 20 million times of getcpu(), the real syscall version take 25
seconds, while the vsyscall version take only 2.4 seconds.
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Loongson64 based systems are PC-like systems which use PCI/PCIe as its
I/O bus, This patch adds the PCI host controller support for LoongArch.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Parse MADT to get multi-processor information, in order to fix the boot
problem and cpu-hotplug problem for SMP platform.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The kernel entry points of both boot CPU (i.e., kernel_entry) and non-
boot CPUs (i.e., smpboot_entry) may be physical address from BootLoader
(in DA mode or identity-mapping PG mode). So we should jump to the link
address before PG enabled (because DA is disabled at the same time) and
just after DMW configured.

Specifically: With some older firmwares, non-boot CPUs started with PG
enabled, but this need firmware cooperation in the form of a temporary
page table, which is deemed unnecessary. OTOH, latest firmware versions
configure the non-boot CPUs to start in DA mode, so kernel-side changes
are needed.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

This fix a warning when "make C=2":
arch/loongarch/kernel/ptrace.c: note: in included file (through include/linux/uaccess.h, include/linux/sched/task.h, include/linux/sched/signal.h, include/linux/ptrace.h, include/linux/audit.h):
./arch/loongarch/include/asm/uaccess.h:232:32: warning: incorrect type in argument 2 (different address spaces)
./arch/loongarch/include/asm/uaccess.h:232:32:    expected void const *from
./arch/loongarch/include/asm/uaccess.h:232:32:    got void const [noderef] __user *from
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The return value from the call to get_timer_irq() is int, which can be
a negative error code. However, the return value is being assigned to an
unsigned int variable 'irq', so making 'irq' an int.

Eliminate the following coccicheck warning:
./arch/loongarch/kernel/time.c:146:5-8: WARNING: Unsigned expression compared with zero: irq < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

1, ACPI, EFI and SMP are mandatories for LoongArch, select them
unconditionally to avoid various build errors for 'make randconfig'.
2, Move the MMU_GATHER_MERGE_VMAS selection to the correct place.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected,
cpu_max_bits_warn() generates a runtime warning similar as below while
we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit)
instead of NR_CPUS to iterate CPUs.

[    3.052463] ------------[ cut here ]------------
[    3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0
[    3.070072] Modules linked in: efivarfs autofs4
[    3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052
[    3.084034] Hardware name: Loongson Loongson-3A5000-7A1000-1w-V0.1-CRB/Loongson-LS3A5000-7A1000-1w-EVB-V1.21, BIOS Loongson-UDK2018-V2.0.04082-beta7 04/27
[    3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000
[    3.109127]         9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430
[    3.118774]         90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff
[    3.128412]         0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890
[    3.138056]         0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa
[    3.147711]         ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000
[    3.157364]         900000000101c998 0000000000000004 9000000000ef7430 0000000000000000
[    3.167012]         0000000000000009 000000000000006c 0000000000000000 0000000000000000
[    3.176641]         9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286
[    3.186260]         00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c
[    3.195868]         ...
[    3.199917] Call Trace:
[    3.203941] [<90000000002086d8>] show_stack+0x38/0x14c
[    3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88
[    3.217625] [<900000000023d268>] __warn+0xd0/0x100
[    3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc
[    3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0
[    3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4
[    3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4
[    3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0
[    3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100
[    3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94
[    3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160
[    3.281824] ---[ end trace 8b484262b4b8c24c ]---

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Merge tag 'for-6.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - A few fixes for the DM verity and bufio changes in this merge window

 - A smatch warning fix for DM writecache locking in writecache_map

* tag 'for-6.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm bufio: fix some cases where the code sleeps with spinlock held
  dm writecache: fix smatch warning about invalid return from writecache_map
  dm verity: fix verity_parse_opt_args parsing
  dm verity: fix DM_VERITY_OPTS_MAX value yet again
  dm bufio: simplify DM_BUFIO_CLIENT_NO_SLEEP locking

Pull drm fixes from Dave Airlie:
 "Not much to squeeze into rc1, just two small fixes, one for core gem
 and one for shmem-helpers:

  gem:
   - Annotate WW context in error paths

  shmem-helper:
   - Add missing vunmap in error paths"

* tag 'drm-next-2022-08-12-1' of git://anongit.freedesktop.org/drm/drm:
  drm/gem: Properly annotate WW context on drm_gem_lock_reservations() error
  drm/shmem-helper: Add missing vunmap on error

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, bpf, can and netfilter.

  A little larger than usual but it's all fixes, no late features. It's
  large partially because of timing, and partially because of follow ups
  to stuff that got merged a week or so before the merge window and
  wasn't as widely tested. Maybe the Bluetooth fixes are a little
  alarming so we'll address that, but the rest seems okay and not scary.

  Notably we're including a fix for the netfilter Kconfig [1], your WiFi
  warning [2] and a bluetooth fix which should unblock syzbot [3].

  Current release - regressions:

   - Bluetooth:
      - don't try to cancel uninitialized works [3]
      - L2CAP: fix use-after-free caused by l2cap_chan_put

   - tls: rx: fix device offload after recent rework

   - devlink: fix UAF on failed reload and leftover locks in mlxsw

  Current release - new code bugs:

   - netfilter:
      - flowtable: fix incorrect Kconfig dependencies [1]
      - nf_tables: fix crash when nf_trace is enabled

   - bpf:
      - use proper target btf when exporting attach_btf_obj_id
      - arm64: fixes for bpf trampoline support

   - Bluetooth:
      - ISO: unlock on error path in iso_sock_setsockopt()
      - ISO: fix info leak in iso_sock_getsockopt()
      - ISO: fix iso_sock_getsockopt for BT_DEFER_SETUP
      - ISO: fix memory corruption on iso_pinfo.base
      - ISO: fix not using the correct QoS
      - hci_conn: fix updating ISO QoS PHY

   - phy: dp83867: fix get nvmem cell fail

  Previous releases - regressions:

   - wifi: cfg80211: fix validating BSS pointers in
     __cfg80211_connect_result [2]

   - atm: bring back zatm uAPI after ATM had been removed

   - properly fix old bug making bonding ARP monitor mode not being able
     to work with software devices with lockless Tx

   - tap: fix null-deref on skb->dev in dev_parse_header_protocol

   - revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP" it helps some
     devices and breaks others

   - netfilter:
      - nf_tables: many fixes rejecting cross-object linking which may
        lead to UAFs
      - nf_tables: fix null deref due to zeroed list head
      - nf_tables: validate variable length element extension

   - bgmac: fix a BUG triggered by wrong bytes_compl

   - bcmgenet: indicate MAC is in charge of PHY PM

  Previous releases - always broken:

   - bpf:
      - fix bad pointer deref in bpf_sys_bpf() injected via test infra
      - disallow non-builtin bpf programs calling the prog_run command
      - don't reinit map value in prealloc_lru_pop
      - fix UAFs during the read of map iterator fd
      - fix invalidity check for values in sk local storage map
      - reject sleepable program for non-resched map iterator

   - mptcp:
      - move subflow cleanup in mptcp_destroy_common()
      - do not queue data on closed subflows

   - virtio_net: fix memory leak inside XDP_TX with mergeable

   - vsock: fix memory leak when multiple threads try to connect()

   - rework sk_user_data sharing to prevent psock leaks

   - geneve: fix TOS inheriting for ipv4

   - tunnels & drivers: do not use RT_TOS for IPv6 flowlabel

   - phy: c45 baset1: do not skip aneg configuration if clock role is
     not specified

   - rose: avoid overflow when /proc displays timer information

   - x25: fix call timeouts in blocking connects

   - can: mcp251x: fix race condition on receive interrupt

   - can: j1939:
      - replace user-reachable WARN_ON_ONCE() with netdev_warn_once()
      - fix memory leak of skbs in j1939_session_destroy()

  Misc:

   - docs: bpf: clarify that many things are not uAPI

   - seg6: initialize induction variable to first valid array index (to
     silence clang vs objtool warning)

   - can: ems_usb: fix clang 14's -Wunaligned-access warning"

* tag 'net-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (117 commits)
  net: atm: bring back zatm uAPI
  dpaa2-eth: trace the allocated address instead of page struct
  net: add missing kdoc for struct genl_multicast_group::flags
  nfp: fix use-after-free in area_cache_get()
  MAINTAINERS: use my korg address for mt7601u
  mlxsw: minimal: Fix deadlock in ports creation
  bonding: fix reference count leak in balance-alb mode
  net: usb: qmi_wwan: Add support for Cinterion MV32
  bpf: Shut up kern_sys_bpf warning.
  net/tls: Use RCU API to access tls_ctx->netdev
  tls: rx: device: don't try to copy too much on detach
  tls: rx: device: bound the frag walk
  net_sched: cls_route: remove from list when handle is 0
  selftests: forwarding: Fix failing tests with old libnet
  net: refactor bpf_sk_reuseport_detach()
  net: fix refcount bug in sk_psock_get (2)
  selftests/bpf: Ensure sleepable program is rejected by hash map iter
  selftests/bpf: Add write tests for sk local storage map iterator
  selftests/bpf: Add tests for reading a dangling map iter fd
  bpf: Only allow sleepable program for resched-able iterator
  ...

Pull more ACPI updates from Rafael Wysocki:
 "These fix up direct references to the fwnode field in struct device
  and extend ACPI device properties support.

  Specifics:

   - Replace direct references to the fwnode field in struct device with
     dev_fwnode() and device_match_fwnode() (Andy Shevchenko)

   - Make the ACPI code handling device properties support properties
     with buffer values (Sakari Ailus)"

* tag 'acpi-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: property: Fix error handling in acpi_init_properties()
  ACPI: VIOT: Do not dereference fwnode in struct device
  ACPI: property: Read buffer properties as integers
  ACPI: property: Add support for parsing buffer property UUID
  ACPI: property: Unify integer value reading functions
  ACPI: property: Switch node property referencing from ifs to a switch
  ACPI: property: Move property ref argument parsing into a new function
  ACPI: property: Use acpi_object_type consistently in property ref parsing
  ACPI: property: Tie data nodes to acpi handles
  ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool

Pull more iomap updates from Darrick Wong:
 "In the past 10 days or so I've not heard any ZOMG STOP style
  complaints about removing ->writepage support from gfs2 or zonefs, so
  here's the pull request removing them (and the underlying fs iomap
  support) from the kernel:

   - Remove iomap_writepage and all callers, since the mm apparently
     never called the zonefs or gfs2 writepage functions"

* tag 'iomap-6.0-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: remove iomap_writepage
  zonefs: remove ->writepage
  gfs2: remove ->writepage
  gfs2: stop using generic_writepages in gfs2_ail1_start_one

Merge tag 'drm-misc-next-fixes-2022-08-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

 * gem: Annotate WW context in error paths
 * shmem-helper: Add missing vunmap in error paths
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YvOLPpufsvOJHiNY@linux-uq9g

Pull ceph updates from Ilya Dryomov:
 "We have a good pile of various fixes and cleanups from Xiubo, Jeff,
  Luis and others, almost exclusively in the filesystem.

  Several patches touch files outside of our normal purview to set the
  stage for bringing in Jeff's long awaited ceph+fscrypt series in the
  near future. All of them have appropriate acks and sat in linux-next
  for a while"

* tag 'ceph-for-5.20-rc1' of https://github.com/ceph/ceph-client: (27 commits)
  libceph: clean up ceph_osdc_start_request prototype
  libceph: fix ceph_pagelist_reserve() comment typo
  ceph: remove useless check for the folio
  ceph: don't truncate file in atomic_open
  ceph: make f_bsize always equal to f_frsize
  ceph: flush the dirty caps immediatelly when quota is approaching
  libceph: print fsid and epoch with osd id
  libceph: check pointer before assigned to "c->rules[]"
  ceph: don't get the inline data for new creating files
  ceph: update the auth cap when the async create req is forwarded
  ceph: make change_auth_cap_ses a global symbol
  ceph: fix incorrect old_size length in ceph_mds_request_args
  ceph: switch back to testing for NULL folio->private in ceph_dirty_folio
  ceph: call netfs_subreq_terminated with was_async == false
  ceph: convert to generic_file_llseek
  ceph: fix the incorrect comment for the ceph_mds_caps struct
  ceph: don't leak snap_rwsem in handle_cap_grant
  ceph: prevent a client from exceeding the MDS maximum xattr size
  ceph: choose auth MDS for getxattr with the Xs caps
  ceph: add session already open notify support
  ...

Pull more kvm updates from Paolo Bonzini:

 - Xen timer fixes

 - Documentation formatting fixes

 - Make rseq selftest compatible with glibc-2.35

 - Fix handling of illegal LEA reg, reg

 - Cleanup creation of debugfs entries

 - Fix steal time cache handling bug

 - Fixes for MMIO caching

 - Optimize computation of number of LBRs

 - Fix uninitialized field in guest_maxphyaddr < host_maxphyaddr path

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
  KVM: x86/MMU: properly format KVM_CAP_VM_DISABLE_NX_HUGE_PAGES capability table
  Documentation: KVM: extend KVM_CAP_VM_DISABLE_NX_HUGE_PAGES heading underline
  KVM: VMX: Adjust number of LBR records for PERF_CAPABILITIES at refresh
  KVM: VMX: Use proper type-safe functions for vCPU => LBRs helpers
  KVM: x86: Refresh PMU after writes to MSR_IA32_PERF_CAPABILITIES
  KVM: selftests: Test all possible "invalid" PERF_CAPABILITIES.LBR_FMT vals
  KVM: selftests: Use getcpu() instead of sched_getcpu() in rseq_test
  KVM: selftests: Make rseq compatible with glibc-2.35
  KVM: Actually create debugfs in kvm_create_vm()
  KVM: Pass the name of the VM fd to kvm_create_vm_debugfs()
  KVM: Get an fd before creating the VM
  KVM: Shove vcpu stats_id init into kvm_vcpu_init()
  KVM: Shove vm stats_id init into kvm_create_vm()
  KVM: x86/mmu: Add sanity check that MMIO SPTE mask doesn't overlap gen
  KVM: x86/mmu: rename trace function name for asynchronous page fault
  KVM: x86/xen: Stop Xen timer before changing IRQ
  KVM: x86/xen: Initialize Xen timer only once
  KVM: SVM: Disable SEV-ES support if MMIO caching is disable
  KVM: x86/mmu: Fully re-evaluate MMIO caching when SPTE masks change
  KVM: x86: Tag kvm_mmu_x86_module_init() with __init
  ...

Jiri reports that linux-atm does not build without this header.
Bring it back. It's completely dead code but we can't break
the build for user space :(
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Fixes: 052e1f01 ("net: atm: remove support for ZeitNet ZN122x ATM devices")
Link: https://lore.kernel.org/all/8576aef3-37e4-8bae-bab5-08f82a78efd3@kernel.org/
Link: https://lore.kernel.org/r/20220810164547.484378-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We should trace the allocated address instead of page struct.

Fixes: 27c87486 ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: Chen Lin <chen.lin5@zte.com.cn>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20220811151651.3327-1-chen45464546@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge changes adding support for device properties with buffer values
to the ACPI device properties handling code.

* acpi-properties:
  ACPI: property: Fix error handling in acpi_init_properties()
  ACPI: property: Read buffer properties as integers
  ACPI: property: Add support for parsing buffer property UUID
  ACPI: property: Unify integer value reading functions
  ACPI: property: Switch node property referencing from ifs to a switch
  ACPI: property: Move property ref argument parsing into a new function
  ACPI: property: Use acpi_object_type consistently in property ref parsing
  ACPI: property: Tie data nodes to acpi handles
  ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool

Multicast group flags were added in commit 4d54cc32 ("mptcp: avoid
lock_fast usage in accept path"), but it missed adding the kdoc.

Mention which flags go into that field, and do the same for
op structs.

Link: https://lore.kernel.org/r/20220809232012.403730-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull input updates from Dmitry Torokhov:

 - changes to input core to properly queue synthetic events (such as
   autorepeat) and to release multitouch contacts when an input device
   is inhibited or suspended

 - reworked quirk handling in i8042 driver that consolidates multiple
   DMI tables into one and adds several quirks for TUXEDO line of
   laptops

 - update to mt6779 keypad to better reflect organization of the
   hardware

 - changes to mtk-pmic-keys driver preparing it to handle more variants

 - facelift of adp5588-keys driver

 - improvements to iqs7222 driver

 - adjustments to various DT binding documents for input devices

 - other assorted driver fixes.

* tag 'input-for-v5.20-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
  Input: adc-joystick - fix ordering in adc_joystick_probe()
  dt-bindings: input: ariel-pwrbutton: use spi-peripheral-props.yaml
  Input: deactivate MT slots when inhibiting or suspending devices
  Input: properly queue synthetic events
  dt-bindings: input: iqs7222: Use central 'linux,code' definition
  Input: i8042 - add dritek quirk for Acer Aspire One AO532
  dt-bindings: input: gpio-keys: accept also interrupt-extended
  dt-bindings: input: gpio-keys: reference input.yaml and document properties
  dt-bindings: input: gpio-keys: enforce node names to match all properties
  dt-bindings: input: Convert adc-keys to DT schema
  dt-bindings: input: Centralize 'linux,input-type' definition
  dt-bindings: input: Use common 'linux,keycodes' definition
  dt-bindings: input: Centralize 'linux,code' definition
  dt-bindings: input: Increase maximum keycode value to 0x2ff
  Input: mt6779-keypad - implement row/column selection
  Input: mt6779-keypad - match hardware matrix organization
  Input: i8042 - add additional TUXEDO devices to i8042 quirk tables
  Input: goodix - switch use of acpi_gpio_get_*_resource() APIs
  Input: i8042 - add TUXEDO devices to i8042 quirk tables
  Input: i8042 - add debug output for quirks
  ...

area_cache_get() is used to distribute cache->area and set cache->id,
 and if cache->id is not 0 and cache->area->kref refcount is 0, it will
 release the cache->area by nfp_cpp_area_release(). area_cache_get()
 set cache->id before cpp->op->area_init() and nfp_cpp_area_acquire().

But if area_init() or nfp_cpp_area_acquire() fails, the cache->id is
 is already set but the refcount is not increased as expected. At this
 time, calling the nfp_cpp_area_release() will cause use-after-free.

To avoid the use-after-free, set cache->id after area_init() and
 nfp_cpp_area_acquire() complete successfully.

Note: This vulnerability is triggerable by providing emulated device
 equipped with specified configuration.

 BUG: KASAN: use-after-free in nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
  Write of size 4 at addr ffff888005b7f4a0 by task swapper/0/1

 Call Trace:
  <TASK>
 nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760)
 area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:884)

 Allocated by task 1:
 nfp_cpp_area_alloc_with_name (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:303)
 nfp_cpp_area_cache_add (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:802)
 nfp6000_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:1230)
 nfp_cpp_from_operations (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:1215)
 nfp_pci_probe (drivers/net/ethernet/netronome/nfp/nfp_main.c:744)

 Freed by task 1:
 kfree (mm/slub.c:4562)
 area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:873)
 nfp_cpp_read (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:924 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:973)
 nfp_cpp_readl (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpplib.c:48)
Signed-off-by: Jialiang Wang <wangjialiang0806@163.com>
Reviewed-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220810073057.4032-1-wangjialiang0806@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Change my address for mt7601u to the main one.

Link: https://lore.kernel.org/r/20220809233843.408004-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Drop devl_lock() / devl_unlock() from ports creation and removal flows
since the devlink instance lock is now taken by mlxsw_core.

Fixes: 72a4c8c9 ("mlxsw: convert driver to use unlocked devlink API during init/fini")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/f4afce5ab0318617f3866b85274be52542d59b32.1660211614.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit d5410ac7 ("net:bonding:support balance-alb interface
with vlan to bridge") introduced a reference count leak by not releasing
the reference acquired by ip_dev_find().  Remedy this by insuring the
reference is released.

Fixes: d5410ac7 ("net:bonding:support balance-alb interface with vlan to bridge")
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/26758.1660194413@famineSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This reverts commit 258fafcd.

The clang -Wformat warning is terminally broken, and the clang people
can't seem to get their act together.

This test program causes a warning with clang:

	#include <stdio.h>

	int main(int argc, char **argv)
	{
		printf("%hhu\n", 'a');
	}

resulting in

  t.c:5:19: warning: format specifies type 'unsigned char' but the argument has type 'int' [-Wformat]
          printf("%hhu\n", 'a');
                  ~~~~     ^~~
                  %d

and apparently clang people consider that a feature, because they don't
want to face the reality of how either C character constants, C
arithmetic, and C varargs functions work.

The rest of the world just shakes their head at that kind of
incompetence, and turns off -Wformat for clang again.

And no, the "you should use a pointless cast to shut this up" is not a
valid answer.  That warning should not exist in the first place, or at
least be optinal with some "-Wformat-me-harder" kind of option.

[ Admittedly, there's also very little reason to *ever* use '%hh[ud]' in
  C, but what little reason there is is entirely about 'I want to see
  only the low 8 bits of the argument'. So I would suggest nobody ever
  use that format in the first place, but if they do, the clang
  behavious is simply always wrong. Because '%hhu' takes an 'int'. It's
  that simple. ]
Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>