- 20 Aug, 2021 3 commits
-
-
Hans de Goede authored
Add a function to find a connector based on a fwnode. This will be used by the new drm_connector_oob_hotplug_event() function which is added by the next patch in this patch-set. Changes in v2: - Complete rewrite to use a global connector list in drm_connector.c rather then using a class-dev-iter in drm_sysfs.c Changes in v3: - Add forward declaration for struct fwnode_handle to drm_crtc_internal.h (fixes warning reported by kernel test robot <lkp@intel.com>) Tested-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Link: https://lore.kernel.org/r/20210817215201.795062-4-hdegoede@redhat.com
-
Hans de Goede authored
Add a fwnode pointer to struct drm_connector and register an acpi_bus_type for the connectors with the ACPI subsystem (when CONFIG_ACPI is enabled). The adding of the fwnode pointer allows drivers to associate a fwnode that represents a connector with that connector. When the new fwnode pointer points to an ACPI-companion, then the new acpi_bus_type will cause the ACPI subsys to bind the device instantiated for the connector with the fwnode by calling acpi_bind_one(). This will result in a firmware_node symlink under /sys/class/card#-<connecter-name>/ which helps to verify that the fwnode-s and connectors are properly matched. Changes in v2: - Make drm_connector_cleanup() call fwnode_handle_put() on connector->fwnode and document this Co-developed-by:
-
Hans de Goede authored
Give connector sysfs devices there own device_type, this allows us to check if a device passed to functions dealing with generic devices is a drm_connector or not. A check like this is necessary in the drm_connector_acpi_bus_match() function added in the next patch in this series. Tested-by:
-
- 12 Aug, 2021 4 commits
-
-
Rob Clark authored
If we created our own connector because the driver does not support the NO_CONNECTOR flag, we don't want the downstream bridge to *also* create a connector. And if this driver did pass the NO_CONNECTOR flag (and we supported that mode) this would change nothing. Fixes: 4e5763f0 ("drm/bridge: ti-sn65dsi86: Wrap panel with panel-bridge") Reported-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Rob Clark <robdclark@chromium.org> Tested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Tested-by:
-
Lucas De Marchi authored
Byte 26 in a edid struct is supposed to be "Blue and white least-significant 2 bits", not "black and white". Rename the field accordingly. This field is not used anywhere, so just renaming it here for correctness. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Simon Ser <contact@emersion.fr> Signed-off-by:
-
David Stevens authored
Blob resources without the cross device flag don't have a uuid to share with other virtio devices. When exporting such blobs, set uuid_state to STATE_ERR so that virtgpu_virtio_get_uuid doesn't hang. Signed-off-by:
David Stevens <stevensd@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20210811040401.1264234-1-stevensd@chromium.orgSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Pavel Skripkin authored
Syzbot reported general protection fault in udmabuf_create. The problem was in wrong error handling. In commit 16c243e9 ("udmabuf: Add support for mapping hugepages (v4)") shmem_read_mapping_page() call was replaced with find_get_page_flags(), but find_get_page_flags() returns NULL on failure instead PTR_ERR(). Wrong error checking was causing GPF in get_page(), since passed page was equal to NULL. Fix it by changing if (IS_ER(!hpage)) to if (!hpage) Reported-by: syzbot+e9cd3122a37c5d6c51e8@syzkaller.appspotmail.com Fixes: 16c243e9 ("udmabuf: Add support for mapping hugepages (v4)") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210811175052.21254-1-paskripkin@gmail.comSigned-off-by:
-
- 11 Aug, 2021 2 commits
-
-
Paul Cercueil authored
By making the CRTC's .vblank_enable() function return an error when it is known that the hardware won't deliver a VBLANK, we can drop the ingenic_drm_atomic_helper_commit_tail() function and use the standard drm_atomic_helper_commit_tail() function instead. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210808134526.119198-4-paul@crapouillou.net
-
Paul Cercueil authored
The priv->ipu_plane would get a different value further down the code, without the first assigned value being read first; so the first assignation can be dropped. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210808134526.119198-2-paul@crapouillou.net
-
- 10 Aug, 2021 15 commits
-
-
Thomas Zimmermann authored
Hide the DRM midlayer behind CONFIG_DRM_LEGACY, make functions use the prefix drm_legacy_, and move declarations to drm_legacy.h. In struct drm_device, move the fields irq and irq_enabled behind CONFIG_DRM_LEGACY. All callers have been updated. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-15-tzimmermann@suse.de
-
Thomas Zimmermann authored
DRM IRQ helpers will become legacy. The function devm_drm_irq_install() is unused and won't be required later. Signed-off-by:
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. DRM IRQ callbacks are now being called directly or inlined. Calls to platform_get_irq() can fail with a negative errno code. Abort initialization in this case. The DRM IRQ midlayer does not handle this case correctly. Signed-off-by:
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. DRM IRQ callbacks are now being called directly or inlined. Calls to platform_get_irq() can fail with a negative errno code. Abort initialization in this case. The DRM IRQ midlayer does not handle this case correctly. For most drivers, only the DRM IRQ helpers use irq_enabled from struct drm_device. Tilcdc also uses irq_enabled to make its error rollback work correctly. As the field will become legacy, duplicated the state in the driver's local private structure. Signed-off-by:
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. DRM IRQ callbacks are now being called directly or inlined. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by:
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. DRM IRQ callbacks are now being called directly or inlined. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-10-tzimmermann@suse.de
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. DRM IRQ callbacks are now being called directly or inlined. Calls to platform_get_irq() can fail with a negative errno code. Abort initialization in this case. The DRM IRQ midlayer does not handle this case correctly. Signed-off-by:
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. DRM IRQ callbacks are now being called directly or inlined. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Abhinav Kumar <abhinavk@codeaurora.org> Acked-by:
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. DRM IRQ callbacks are now being called directly or inlined. Signed-off-by:
Anitha Chrisanthus <anitha.chrisanthus@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-7-tzimmermann@suse.de
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. DRM IRQ callbacks are now being called directly or inlined. Signed-off-by:
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. DRM IRQ callbacks are now being called directly or inlined. Signed-off-by:
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. DRM IRQ callbacks are now being called directly or inlined. v2: * use managed release via devm_request_irq() (Sam) * drop extra test for irq != IRQ_NOTCONNECTED (Sam) Signed-off-by:
Dan Sneddon <Dan.Sneddon@microchip.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-4-tzimmermann@suse.de
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. DRM IRQ callbacks are now being called directly or inlined. Calls to platform_get_irq() can fail with a negative errno code. Abort initialization in this case. The DRM IRQ midlayer does not handle this case correctly. v2: * name struct drm_device variables 'drm' (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. DRM IRQ callbacks are now being called directly or inlined. The interrupt number returned by pci_msi_vector() is now stored in struct amdgpu_irq. Calls to pci_msi_vector() can fail and return a negative errno code. Abort initlaizaton in thi case. The DRM IRQ midlayer does not handle this correctly. Signed-off-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210803090704.32152-2-tzimmermann@suse.de
-
Gal Pressman authored
Fix a few typos in the documentation: - Remove an extraneous 'or' - 'unpins' -> 'unpin' - 'braket' -> 'bracket' - 'mappinsg' -> 'mappings' - 'fullfills' -> 'fulfills' Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Gal Pressman <galpress@amazon.com> Signed-off-by:
-
- 09 Aug, 2021 6 commits
-
-
Cai Huoqing authored
we counld use PFN_UP instead of vmw_num_pages() Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Signed-off-by:
Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210802033552.990-1-caihuoqing@baidu.com
-
Cai Huoqing authored
it's a refactor to make use of PFN_ALIGN/PFN_UP helper macro Signed-off-by:
-
Desmond Cheong Zhi Xi authored
drm_file.master should be protected by either drm_device.master_mutex or drm_file.master_lookup_lock when being dereferenced. However, drm_master_get is called on unprotected file_priv->master pointers in vmw_surface_define_ioctl and vmw_gb_surface_define_internal. This is fixed by replacing drm_master_get with drm_file_get_master. Signed-off-by:
Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Reviewed-by:
-
Baokun Li authored
Using list_move_tail() instead of list_del() + list_add_tail() in vmwgfx_cmdbuf_res.c. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Baokun Li <libaokun1@huawei.com> Signed-off-by:
-
Baokun Li authored
Using list_move_tail() instead of list_del() + list_add_tail() in vmwgfx_cmdbuf.c. Reported-by:
-
Shaokun Zhang authored
Function 'vmw_context_binding_list' is declared twice, remove the repeated declaration. Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Roland Scheidegger <sroland@vmware.com> Cc: Zack Rusin <zackr@vmware.com> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by:
-
- 08 Aug, 2021 10 commits
-
-
Thomas Zimmermann authored
For framebuffers with non-zero offset fields, shadow-plane helpers provide a pointer to the first byte of the contained data. Use it in vkms. Also provide use the offset-adjusted data address for the writeback job's output buffers. Output framebuffers with non-zero offsets now have their content written to the correct location. Signed-off-by:
-
Thomas Zimmermann authored
For framebuffers with non-zero offset fields, shadow-plane helpers provide a pointer to the first byte of the contained data. Use it in vbox. Signed-off-by:
-
Thomas Zimmermann authored
For framebuffers with non-zero offset fields, shadow-plane helpers provide a pointer to the first byte of the contained data. Use it in udl. Signed-off-by:
-
Thomas Zimmermann authored
For framebuffers with non-zero offset fields, shadow-plane helpers provide a pointer to the first byte of the contained data. Use it in simpledrm. Signed-off-by:
-
Thomas Zimmermann authored
For framebuffers with non-zero offset fields, shadow-plane helpers provide a pointer to the first byte of the contained data. Use it in gm12u320. Signed-off-by:
-
Thomas Zimmermann authored
For framebuffers with non-zero offset fields, shadow-plane helpers provide a pointer to the first byte of the contained data. Use it in cirrus. Signed-off-by:
-
Thomas Zimmermann authored
For framebuffers with non-zero offset fields, shadow-plane helpers provide a pointer to the first byte of the contained data. Use it in mgag200. Signed-off-by:
-
Thomas Zimmermann authored
For framebuffers with non-zero offset fields, shadow-plane helpers provide a pointer to the first byte of the contained data. Use it in hyperv. Signed-off-by:
-
Thomas Zimmermann authored
Pass the data parameter to drm_gem_fb_vmap() to retrieve pointers to the data. This address is different from the mapping addresses for framebuffers with non-zero offsets. Replaces gud's internal computation. Signed-off-by:
-
Thomas Zimmermann authored
For framebuffers with non-zero offset fields, shadow-plane helpers provide a pointer to the first byte of the contained data. Use it in ast. Signed-off-by:
-
