- 25 Jan, 2019 6 commits
-
-
Lubomir Rintel authored
The commit 71862f63 ("media: ov7670: Add the ov7670_s_power function") added a power control routing. However, it was not good enough to use as a s_power() callback: it merely flipped on the power GPIOs without restoring the register settings. Fix this now and register an actual power callback. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Lubomir Rintel authored
This will allow us to restore the last set frame rate after the device returns from a power off. [sakari.ailus@linux.intel.com>: Wrap a line over 80 characters] Signed-off-by:
-
Lubomir Rintel authored
This will allow us to restore the last set format after the device returns from a power off. Signed-off-by:
-
Sakari Ailus authored
Instead of assigning the return value to ret and then checking and returning it, just return the value to the caller directly. The success value is always 0. Signed-off-by:
-
Ben Kao authored
This patch adds driver for Omnivision's ov8856 sensor, the driver supports following features: - manual exposure/gain(analog and digital) control support - two link frequencies - VBLANK/HBLANK support - test pattern support - media controller support - runtime PM support - enable Vsync signal output - supported resolutions + 3280x2464 at 30FPS + 1640x1232 at 30FPS Signed-off-by:
Ben Kao <ben.kao@intel.com> Signed-off-by:
-
Luca Ceresoli authored
imx274_read_reg() is not used since commit ca017467 ("media: imx274: add helper to read multibyte registers"). Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
- 21 Jan, 2019 32 commits
-
-
Steve Longerbeam authored
Some imx platforms do not have fwnode connections to all CSI input ports, and should not be treated as an error. This includes the imx6q SabreAuto, which has no connections to ipu1_csi1 and ipu2_csi0. Return -ENOTCONN in imx_csi_parse_endpoint() so that v4l2-fwnode endpoint parsing will not treat an unconnected CSI input port as an error. Fixes: c893500a ("media: imx: csi: Register a subdev notifier") Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Tim Harvey <tharvey@gateworks.com> Cc: stable@vger.kernel.org Tested-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Steve Longerbeam authored
Implement the vidioc_(un)subscribe_event operations. Imx will allow subscribing to the imx-specific frame interval error events, events from subdevices (V4L2_EVENT_SOURCE_CHANGE), and control events. Signed-off-by:
-
Steve Longerbeam authored
In order to receive events generated by subdevices on the video capture nodes, those events need to be forwarded to the subdevice's list of reachable video capture devices. Note this will queue the event to a video device even if there is no actual _enabled_ media path from the sub-device to the video device. So a future improvement is to skip the video device if there is no enabled path to it from the sub-device. The entity->pipe pointer can't be used for this check because in imx-media a sub-device can be a member to more than one streaming pipeline at a time. Signed-off-by:
-
Philipp Zabel authored
The CSI, PRP ENC, and PRP VF subdevices shouldn't have to care about IDMAC line start address alignment. With compose rectangle support in the capture driver, they don't have to anymore. If the direct CSI -> IC path is enabled, the CSI output width must still be aligned to 8 pixels (IC burst length). Signed-off-by:
-
Philipp Zabel authored
Prepare for mbus format being smaller than the written rectangle due to burst size. Signed-off-by:
-
Philipp Zabel authored
Allowing to compose captured images into larger memory buffers will let us lift alignment restrictions on CSI crop width. For now all compose rectangles are identical to the complete frame width / height. This will be changed in the next patches. Signed-off-by:
-
Philipp Zabel authored
It is not correct to calculate decoder capture payload dynamically from the decoded frame width and height reported by the firmware. These tell us what the decoder wrote into the internal framebuffers. The rotator or VDOA always write the full sizeimage when copying the previously decoded frame from the internal framebuffers into the capture queue. Signed-off-by:
-
Philipp Zabel authored
Coda7541 and earlier do not support macroblock tiling. They do support the NV12 format, though. Enable macroblock tiling for NV12 only on CODA960. This fixes crashes when trying to use NV12 support on CodaHx4. Signed-off-by:
-
Souptick Joarder authored
This code is commented since version 3.7. If there is no plan to use it in future, we can remove this dead code. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
-
Hans Verkuil authored
This was never implemented, so do not document this. Signed-off-by:
-
Hans Verkuil authored
The driver name as returned in v4l2_capabilities must be vimc, not vimc_capture. Fix this. Signed-off-by:
-
Steve Longerbeam authored
Switch to devm_kzalloc() when allocating the adv748x device struct. The sizeof() is updated to determine the correct allocation size from the dereferenced pointer type rather than hardcoding the struct type. [Kieran: Change sizeof() to dereference the pointer type] Signed-off-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Paul Kocialkowski authored
It was reported that some cases of interleaved video decoding require using the current destination buffer as a reference. However, this is no longer possible after the move to vb2_find_timestamp because only dequeued and done buffers are considered. Add a helper in our driver that also considers the current destination buffer before resorting to vb2_find_timestamp and use it in MPEG-2. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Paul Kocialkowski authored
Some leftover declarations are still in the cedrus_dec header although they were moved to cedrus_video already. Clean them up. Signed-off-by:
-
Niklas Söderlund authored
If the operation in rvin_set_channel_routing() is successful the 'ret' variable contains the runtime PM use count for the VIN master device. The intention is not to return the use count to the caller but to return 0 on success else none zero. Fix this by always returning 0 if the operation is successful. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Yangtao Li authored
We already have the DEFINE_SHOW_ATTRIBUTE. There is no need to define bdisp_dbg_declare and hva_dbg_declare, so remove them. Also use DEFINE_SHOW_ATTRIBUTE to simplify some code. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Reviewed-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
Yangtao Li authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
-
Matt Ranostay authored
Add initial support for MLX90640 thermal cameras which output an 32x24 greyscale pixel image along with 2 rows of coefficent data. Because of this the data outputed is really 32x26 and needs the two rows removed after using the coefficent information to generate processed images in userspace. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Matt Ranostay authored
Cc: devicetree@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Pawe? Chmiel authored
Add device tree bindings for si470x family radio receiver driver. Signed-off-by:
Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by:
-
Pawe? Chmiel authored
If reset-gpio is defined, use it to bring device out of reset. Without this, it's not possible to access si470x registers. Signed-off-by:
-
Pawe? Chmiel authored
Simplify cleanup of failures by using managed resource helpers Signed-off-by:
-
Pawe? Chmiel authored
This commit enables device tree support adding simple of_match table. Signed-off-by:
-
French, Nicholas A authored
ivtvfb was previously disabled for x86 PAT-enabled systems by commit 1bf1735b ("x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled") as a workaround to abstract MTRR code away from device drivers. The driver is not easily upgradable to the PAT-aware ioremap_wc() API since the firmware hides the address ranges that should be marked write-combined from the driver. However, since a write-combined cache on the framebuffer is only a performance enhancement not a requirement for the framebuffer to function, completely disabling the driver in this configuration is not necessary. Add force_pat module parameter and a corresponding kernel configuration parameter to optionally force initialization on PAT-enabled x86 systems with a warning about the lack of write-combined caching, and document the reasons the driver cannot be easily updated to support wc caching on all systems. Signed-off-by:
Nick French <naf@ou.edu> Signed-off-by:
-
Hans Verkuil authored
This is a test stub driver for soc_camera. Since soc_camera is being deprecated (and in fact, nobody is using it anymore) there's no sense in keeping this test driver. Signed-off-by:
-
Hans Verkuil authored
With the removal of sh_mobile_ceu_camera.c this code is no longer used and can be removed. Signed-off-by:
-
Hans Verkuil authored
This driver got converted to not depend on soc_camera in commit 32e5a70d ("media: platform: Add Renesas CEU driver"). There's no sense in keeping the old version there. Signed-off-by:
-
Hans Verkuil authored
This driver got converted to not depend on soc_camera in commit 7b20f325 ("media: i2c: tw9910: Remove soc_camera dependencies"). There's no sense in keeping the old version there. Signed-off-by:
-
Hans Verkuil authored
This include isn't use anymore, so drop it. Signed-off-by:
-
Hans Verkuil authored
This driver got converted to not depend on soc_camera in commit 762c2812 ("media: i2c: ov772x: Remove soc_camera dependencies"). There's no sense in keeping the old version there. Signed-off-by:
-
Hans Verkuil authored
This driver got converted to not depend on soc_camera in commit 6a26f141 ("media: i2c: mt9t112: Remove soc_camera dependencies"). There's no sense in keeping the old version there. Signed-off-by:
-
Jacopo Mondi authored
As the tw9910 subdevice is registered through the v4l2-async framework, use the v4l2-async provided function to register it. Fixes: 7b20f325 ("media: i2c: tw9910: Remove soc_camera dependencies") Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by:
-
- 17 Jan, 2019 1 commit
-
-
Mauro Carvalho Chehab authored
This driver got converted to not depend on soc_camera on commit 57b0ad9e ("media: soc_camera: ov9640: move ov9640 out of soc_camera"). There's no sense on keeping the old version there. Acked-by:
-
- 16 Jan, 2019 1 commit
-
-
Steve Longerbeam authored
Also add an example pipeline for unconverted capture with interweave on SabreAuto. Cleanup some language in various places in the process. Signed-off-by:
-
