1. 25 Feb, 2019 10 commits
    • Nazarov Sergey's avatar
      net: avoid use IPCB in cipso_v4_error · 3da1ed7a
      Nazarov Sergey authored
      Extract IP options in cipso_v4_error and use __icmp_send.
      Signed-off-by: default avatarSergey Nazarov <s-nazarov@yandex.ru>
      Acked-by: default avatarPaul Moore <paul@paul-moore.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3da1ed7a
    • Nazarov Sergey's avatar
      net: Add __icmp_send helper. · 9ef6b42a
      Nazarov Sergey authored
      Add __icmp_send function having ip_options struct parameter
      Signed-off-by: default avatarSergey Nazarov <s-nazarov@yandex.ru>
      Reviewed-by: default avatarPaul Moore <paul@paul-moore.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9ef6b42a
    • Timur Celik's avatar
      tun: remove unnecessary memory barrier · ecef67cb
      Timur Celik authored
      Replace set_current_state with __set_current_state since no memory
      barrier is needed at this point.
      Signed-off-by: default avatarTimur Celik <mail@timurcelik.de>
      Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ecef67cb
    • Eric Biggers's avatar
      net: socket: set sock->sk to NULL after calling proto_ops::release() · ff7b11aa
      Eric Biggers authored
      Commit 9060cb71 ("net: crypto set sk to NULL when af_alg_release.")
      fixed a use-after-free in sockfs_setattr() when an AF_ALG socket is
      closed concurrently with fchownat().  However, it ignored that many
      other proto_ops::release() methods don't set sock->sk to NULL and
      therefore allow the same use-after-free:
      
          - base_sock_release
          - bnep_sock_release
          - cmtp_sock_release
          - data_sock_release
          - dn_release
          - hci_sock_release
          - hidp_sock_release
          - iucv_sock_release
          - l2cap_sock_release
          - llcp_sock_release
          - llc_ui_release
          - rawsock_release
          - rfcomm_sock_release
          - sco_sock_release
          - svc_release
          - vcc_release
          - x25_release
      
      Rather than fixing all these and relying on every socket type to get
      this right forever, just make __sock_release() set sock->sk to NULL
      itself after calling proto_ops::release().
      
      Reproducer that produces the KASAN splat when any of these socket types
      are configured into the kernel:
      
          #include <pthread.h>
          #include <stdlib.h>
          #include <sys/socket.h>
          #include <unistd.h>
      
          pthread_t t;
          volatile int fd;
      
          void *close_thread(void *arg)
          {
              for (;;) {
                  usleep(rand() % 100);
                  close(fd);
              }
          }
      
          int main()
          {
              pthread_create(&t, NULL, close_thread, NULL);
              for (;;) {
                  fd = socket(rand() % 50, rand() % 11, 0);
                  fchownat(fd, "", 1000, 1000, 0x1000);
                  close(fd);
              }
          }
      
      Fixes: 86741ec2 ("net: core: Add a UID field to struct sock.")
      Signed-off-by: default avatarEric Biggers <ebiggers@google.com>
      Acked-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ff7b11aa
    • Vlad Buslov's avatar
      net: sched: act_tunnel_key: fix NULL pointer dereference during init · a3df633a
      Vlad Buslov authored
      Metadata pointer is only initialized for action TCA_TUNNEL_KEY_ACT_SET, but
      it is unconditionally dereferenced in tunnel_key_init() error handler.
      Verify that metadata pointer is not NULL before dereferencing it in
      tunnel_key_init error handling code.
      
      Fixes: ee28bb56 ("net/sched: fix memory leak in act_tunnel_key_init()")
      Signed-off-by: default avatarVlad Buslov <vladbu@mellanox.com>
      Reviewed-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a3df633a
    • Wen Yang's avatar
      net: dsa: fix a leaked reference by adding missing of_node_put · 9919a363
      Wen Yang authored
      The call to of_parse_phandle returns a node pointer with refcount
      incremented thus it must be explicitly decremented after the last
      usage.
      
      Detected by coccinelle with the following warnings:
      ./net/dsa/port.c:294:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 284, but without a corresponding object release within this function.
      ./net/dsa/dsa2.c:627:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function.
      ./net/dsa/dsa2.c:630:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function.
      ./net/dsa/dsa2.c:636:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function.
      ./net/dsa/dsa2.c:639:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function.
      Signed-off-by: default avatarWen Yang <wen.yang99@zte.com.cn>
      Reviewed-by: default avatarVivien Didelot <vivien.didelot@gmail.com>
      Cc: Andrew Lunn <andrew@lunn.ch>
      Cc: Vivien Didelot <vivien.didelot@gmail.com>
      Cc: Florian Fainelli <f.fainelli@gmail.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Vivien Didelot <vivien.didelot@gmail.com>
      Cc: netdev@vger.kernel.org
      Cc: linux-kernel@vger.kernel.org
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9919a363
    • Timur Celik's avatar
      tun: fix blocking read · 71828b22
      Timur Celik authored
      This patch moves setting of the current state into the loop. Otherwise
      the task may end up in a busy wait loop if none of the break conditions
      are met.
      Signed-off-by: default avatarTimur Celik <mail@timurcelik.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      71828b22
    • Hauke Mehrtens's avatar
      net: dsa: lantiq: Add GPHY firmware files · cffde201
      Hauke Mehrtens authored
      This adds the file names of the FW files which this driver handles into
      the module description.
      Signed-off-by: default avatarHauke Mehrtens <hauke@hauke-m.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cffde201
    • Davide Caratti's avatar
      net/sched: act_skbedit: fix refcount leak when replace fails · 6191da98
      Davide Caratti authored
      when act_skbedit was converted to use RCU in the data plane, we added an
      error path, but we forgot to drop the action refcount in case of failure
      during a 'replace' operation:
      
       # tc actions add action skbedit ptype otherhost pass index 100
       # tc action show action skbedit
       total acts 1
      
               action order 0: skbedit  ptype otherhost pass
                index 100 ref 1 bind 0
       # tc actions replace action skbedit ptype otherhost drop index 100
       RTNETLINK answers: Cannot allocate memory
       We have an error talking to the kernel
       # tc action show action skbedit
       total acts 1
      
               action order 0: skbedit  ptype otherhost pass
                index 100 ref 2 bind 0
      
      Ensure we call tcf_idr_release(), in case 'params_new' allocation failed,
      also when the action is being replaced.
      
      Fixes: c749cdda ("net/sched: act_skbedit: don't use spinlock in the data path")
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6191da98
    • Davide Caratti's avatar
      net/sched: act_ipt: fix refcount leak when replace fails · 8f67c90e
      Davide Caratti authored
      After commit 4e8ddd7f ("net: sched: don't release reference on action
      overwrite"), the error path of all actions was converted to drop refcount
      also when the action was being overwritten. But we forgot act_ipt_init(),
      in case allocation of 'tname' was not successful:
      
       # tc action add action xt -j LOG --log-prefix hello index 100
       tablename: mangle hook: NF_IP_POST_ROUTING
               target:  LOG level warning prefix "hello" index 100
       # tc action show action xt
       total acts 1
      
               action order 0: tablename: mangle  hook: NF_IP_POST_ROUTING
               target  LOG level warning prefix "hello"
               index 100 ref 1 bind 0
       # tc action replace action xt -j LOG --log-prefix world index 100
       tablename: mangle hook: NF_IP_POST_ROUTING
               target:  LOG level warning prefix "world" index 100
       RTNETLINK answers: Cannot allocate memory
       We have an error talking to the kernel
       # tc action show action xt
       total acts 1
      
               action order 0: tablename: mangle  hook: NF_IP_POST_ROUTING
               target  LOG level warning prefix "hello"
               index 100 ref 2 bind 0
      
      Ensure we call tcf_idr_release(), in case 'tname' allocation failed, also
      when the action is being replaced.
      
      Fixes: 4e8ddd7f ("net: sched: don't release reference on action overwrite")
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8f67c90e
  2. 24 Feb, 2019 8 commits
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm · c3619a48
      Linus Torvalds authored
      Pull KVM fixes from Paolo Bonzini:
       "Bug fixes"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
        KVM: MMU: record maximum physical address width in kvm_mmu_extended_role
        kvm: x86: Return LA57 feature based on hardware capability
        x86/kvm/mmu: fix switch between root and guest MMUs
        s390: vsie: Use effective CRYCBD.31 to check CRYCBD validity
      c3619a48
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · c4eb1e18
      Linus Torvalds authored
      Pull networking fixes from David Miller:
       "Hopefully the last pull request for this release. Fingers crossed:
      
         1) Only refcount ESP stats on full sockets, from Martin Willi.
      
         2) Missing barriers in AF_UNIX, from Al Viro.
      
         3) RCU protection fixes in ipv6 route code, from Paolo Abeni.
      
         4) Avoid false positives in untrusted GSO validation, from Willem de
            Bruijn.
      
         5) Forwarded mesh packets in mac80211 need more tailroom allocated,
            from Felix Fietkau.
      
         6) Use operstate consistently for linkup in team driver, from George
            Wilkie.
      
         7) ThunderX bug fixes from Vadim Lomovtsev. Mostly races between VF
            and PF code paths.
      
         8) Purge ipv6 exceptions during netdevice removal, from Paolo Abeni.
      
         9) nfp eBPF code gen fixes from Jiong Wang.
      
        10) bnxt_en firmware timeout fix from Michael Chan.
      
        11) Use after free in udp/udpv6 error handlers, from Paolo Abeni.
      
        12) Fix a race in x25_bind triggerable by syzbot, from Eric Dumazet"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
        net: phy: realtek: Dummy IRQ calls for RTL8366RB
        tcp: repaired skbs must init their tso_segs
        net/x25: fix a race in x25_bind()
        net: dsa: Remove documentation for port_fdb_prepare
        Revert "bridge: do not add port to router list when receives query with source 0.0.0.0"
        selftests: fib_tests: sleep after changing carrier. again.
        net: set static variable an initial value in atl2_probe()
        net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10G
        bpf, doc: add bpf list as secondary entry to maintainers file
        udp: fix possible user after free in error handler
        udpv6: fix possible user after free in error handler
        fou6: fix proto error handler argument type
        udpv6: add the required annotation to mib type
        mdio_bus: Fix use-after-free on device_register fails
        net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255
        bnxt_en: Wait longer for the firmware message response to complete.
        bnxt_en: Fix typo in firmware message timeout logic.
        nfp: bpf: fix ALU32 high bits clearance bug
        nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K
        Documentation: networking: switchdev: Update port parent ID section
        ...
      c4eb1e18
    • Linus Walleij's avatar
      net: phy: realtek: Dummy IRQ calls for RTL8366RB · 4c8e0459
      Linus Walleij authored
      This fixes a regression introduced by
      commit 0d2e778e
      "net: phy: replace PHY_HAS_INTERRUPT with a check for
      config_intr and ack_interrupt".
      
      This assumes that a PHY cannot trigger interrupt unless
      it has .config_intr() or .ack_interrupt() implemented.
      A later patch makes the code assume both need to be
      implemented for interrupts to be present.
      
      But this PHY (which is inside a DSA) will happily
      fire interrupts without either callback.
      
      Implement dummy callbacks for .config_intr() and
      .ack_interrupt() in the phy header to fix this.
      
      Tested on the RTL8366RB on D-Link DIR-685.
      
      Fixes: 0d2e778e ("net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt")
      Cc: Heiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4c8e0459
    • Eric Dumazet's avatar
      tcp: repaired skbs must init their tso_segs · bf50b606
      Eric Dumazet authored
      syzbot reported a WARN_ON(!tcp_skb_pcount(skb))
      in tcp_send_loss_probe() [1]
      
      This was caused by TCP_REPAIR sent skbs that inadvertenly
      were missing a call to tcp_init_tso_segs()
      
      [1]
      WARNING: CPU: 1 PID: 0 at net/ipv4/tcp_output.c:2534 tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534
      Kernel panic - not syncing: panic_on_warn set ...
      CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc7+ #77
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      Call Trace:
       <IRQ>
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0x172/0x1f0 lib/dump_stack.c:113
       panic+0x2cb/0x65c kernel/panic.c:214
       __warn.cold+0x20/0x45 kernel/panic.c:571
       report_bug+0x263/0x2b0 lib/bug.c:186
       fixup_bug arch/x86/kernel/traps.c:178 [inline]
       fixup_bug arch/x86/kernel/traps.c:173 [inline]
       do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271
       do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290
       invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973
      RIP: 0010:tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534
      Code: 88 fc ff ff 4c 89 ef e8 ed 75 c8 fb e9 c8 fc ff ff e8 43 76 c8 fb e9 63 fd ff ff e8 d9 75 c8 fb e9 94 f9 ff ff e8 bf 03 91 fb <0f> 0b e9 7d fa ff ff e8 b3 03 91 fb 0f b6 1d 37 43 7a 03 31 ff 89
      RSP: 0018:ffff8880ae907c60 EFLAGS: 00010206
      RAX: ffff8880a989c340 RBX: 0000000000000000 RCX: ffffffff85dedbdb
      RDX: 0000000000000100 RSI: ffffffff85dee0b1 RDI: 0000000000000005
      RBP: ffff8880ae907c90 R08: ffff8880a989c340 R09: ffffed10147d1ae1
      R10: ffffed10147d1ae0 R11: ffff8880a3e8d703 R12: ffff888091b90040
      R13: ffff8880a3e8d540 R14: 0000000000008000 R15: ffff888091b90860
       tcp_write_timer_handler+0x5c0/0x8a0 net/ipv4/tcp_timer.c:583
       tcp_write_timer+0x10e/0x1d0 net/ipv4/tcp_timer.c:607
       call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
       expire_timers kernel/time/timer.c:1362 [inline]
       __run_timers kernel/time/timer.c:1681 [inline]
       __run_timers kernel/time/timer.c:1649 [inline]
       run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
       __do_softirq+0x266/0x95a kernel/softirq.c:292
       invoke_softirq kernel/softirq.c:373 [inline]
       irq_exit+0x180/0x1d0 kernel/softirq.c:413
       exiting_irq arch/x86/include/asm/apic.h:536 [inline]
       smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062
       apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
       </IRQ>
      RIP: 0010:native_safe_halt+0x2/0x10 arch/x86/include/asm/irqflags.h:58
      Code: ff ff ff 48 89 c7 48 89 45 d8 e8 59 0c a1 fa 48 8b 45 d8 e9 ce fe ff ff 48 89 df e8 48 0c a1 fa eb 82 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
      RSP: 0018:ffff8880a98afd78 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13
      RAX: 1ffffffff1125061 RBX: ffff8880a989c340 RCX: 0000000000000000
      RDX: dffffc0000000000 RSI: 0000000000000001 RDI: ffff8880a989cbbc
      RBP: ffff8880a98afda8 R08: ffff8880a989c340 R09: 0000000000000000
      R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
      R13: ffffffff889282f8 R14: 0000000000000001 R15: 0000000000000000
       arch_cpu_idle+0x10/0x20 arch/x86/kernel/process.c:555
       default_idle_call+0x36/0x90 kernel/sched/idle.c:93
       cpuidle_idle_call kernel/sched/idle.c:153 [inline]
       do_idle+0x386/0x570 kernel/sched/idle.c:262
       cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:353
       start_secondary+0x404/0x5c0 arch/x86/kernel/smpboot.c:271
       secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
      Kernel Offset: disabled
      Rebooting in 86400 seconds..
      
      Fixes: 79861919 ("tcp: fix TCP_REPAIR xmit queue setup")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Cc: Andrey Vagin <avagin@openvz.org>
      Cc: Soheil Hassas Yeganeh <soheil@google.com>
      Cc: Neal Cardwell <ncardwell@google.com>
      Acked-by: default avatarSoheil Hassas Yeganeh <soheil@google.com>
      Acked-by: default avatarNeal Cardwell <ncardwell@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bf50b606
    • Eric Dumazet's avatar
      net/x25: fix a race in x25_bind() · 797a22bd
      Eric Dumazet authored
      syzbot was able to trigger another soft lockup [1]
      
      I first thought it was the O(N^2) issue I mentioned in my
      prior fix (f657d22ee1f "net/x25: do not hold the cpu
      too long in x25_new_lci()"), but I eventually found
      that x25_bind() was not checking SOCK_ZAPPED state under
      socket lock protection.
      
      This means that multiple threads can end up calling
      x25_insert_socket() for the same socket, and corrupt x25_list
      
      [1]
      watchdog: BUG: soft lockup - CPU#0 stuck for 123s! [syz-executor.2:10492]
      Modules linked in:
      irq event stamp: 27515
      hardirqs last  enabled at (27514): [<ffffffff81006673>] trace_hardirqs_on_thunk+0x1a/0x1c
      hardirqs last disabled at (27515): [<ffffffff8100668f>] trace_hardirqs_off_thunk+0x1a/0x1c
      softirqs last  enabled at (32): [<ffffffff8632ee73>] x25_get_neigh+0xa3/0xd0 net/x25/x25_link.c:336
      softirqs last disabled at (34): [<ffffffff86324bc3>] x25_find_socket+0x23/0x140 net/x25/af_x25.c:341
      CPU: 0 PID: 10492 Comm: syz-executor.2 Not tainted 5.0.0-rc7+ #88
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      RIP: 0010:__sanitizer_cov_trace_pc+0x4/0x50 kernel/kcov.c:97
      Code: f4 ff ff ff e8 11 9f ea ff 48 c7 05 12 fb e5 08 00 00 00 00 e9 c8 e9 ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 <48> 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 38 0c 92 7e 81 e2
      RSP: 0018:ffff88806e94fc48 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13
      RAX: 1ffff1100d84dac5 RBX: 0000000000000001 RCX: ffffc90006197000
      RDX: 0000000000040000 RSI: ffffffff86324bf3 RDI: ffff88806c26d628
      RBP: ffff88806e94fc48 R08: ffff88806c1c6500 R09: fffffbfff1282561
      R10: fffffbfff1282560 R11: ffffffff89412b03 R12: ffff88806c26d628
      R13: ffff888090455200 R14: dffffc0000000000 R15: 0000000000000000
      FS:  00007f3a107e4700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
      CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      CR2: 00007f3a107e3db8 CR3: 00000000a5544000 CR4: 00000000001406f0
      DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      Call Trace:
       __x25_find_socket net/x25/af_x25.c:327 [inline]
       x25_find_socket+0x7d/0x140 net/x25/af_x25.c:342
       x25_new_lci net/x25/af_x25.c:355 [inline]
       x25_connect+0x380/0xde0 net/x25/af_x25.c:784
       __sys_connect+0x266/0x330 net/socket.c:1662
       __do_sys_connect net/socket.c:1673 [inline]
       __se_sys_connect net/socket.c:1670 [inline]
       __x64_sys_connect+0x73/0xb0 net/socket.c:1670
       do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      RIP: 0033:0x457e29
      Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
      RSP: 002b:00007f3a107e3c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
      RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e29
      RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000005
      RBP: 000000000073c040 R08: 0000000000000000 R09: 0000000000000000
      R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3a107e46d4
      R13: 00000000004be362 R14: 00000000004ceb98 R15: 00000000ffffffff
      Sending NMI from CPU 0 to CPUs 1:
      NMI backtrace for cpu 1
      CPU: 1 PID: 10493 Comm: syz-executor.3 Not tainted 5.0.0-rc7+ #88
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline]
      RIP: 0010:queued_write_lock_slowpath+0x143/0x290 kernel/locking/qrwlock.c:86
      Code: 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 41 0f b6 55 00 <41> 38 d7 7c eb 84 d2 74 e7 48 89 df e8 cc aa 4e 00 eb dd be 04 00
      RSP: 0018:ffff888085c47bd8 EFLAGS: 00000206
      RAX: 0000000000000300 RBX: ffffffff89412b00 RCX: 1ffffffff1282560
      RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89412b00
      RBP: ffff888085c47c70 R08: 1ffffffff1282560 R09: fffffbfff1282561
      R10: fffffbfff1282560 R11: ffffffff89412b03 R12: 00000000000000ff
      R13: fffffbfff1282560 R14: 1ffff11010b88f7d R15: 0000000000000003
      FS:  00007fdd04086700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
      CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      CR2: 00007fdd04064db8 CR3: 0000000090be0000 CR4: 00000000001406e0
      DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      Call Trace:
       queued_write_lock include/asm-generic/qrwlock.h:104 [inline]
       do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203
       __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline]
       _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312
       x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267
       x25_bind+0x273/0x340 net/x25/af_x25.c:703
       __sys_bind+0x23f/0x290 net/socket.c:1481
       __do_sys_bind net/socket.c:1492 [inline]
       __se_sys_bind net/socket.c:1490 [inline]
       __x64_sys_bind+0x73/0xb0 net/socket.c:1490
       do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      RIP: 0033:0x457e29
      
      Fixes: 90c27297 ("X.25 remove bkl in bind")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: andrew hendry <andrew.hendry@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      797a22bd
    • Hauke Mehrtens's avatar
      net: dsa: Remove documentation for port_fdb_prepare · 99407d8f
      Hauke Mehrtens authored
      This callback was removed some time ago, also remove the documentation.
      
      Fixes: 1b6dd556 ("net: dsa: Remove prepare phase for FDB")
      Signed-off-by: default avatarHauke Mehrtens <hauke@hauke-m.de>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      99407d8f
    • Hangbin Liu's avatar
      Revert "bridge: do not add port to router list when receives query with source 0.0.0.0" · 278e2148
      Hangbin Liu authored
      This reverts commit 5a2de63f ("bridge: do not add port to router list
      when receives query with source 0.0.0.0") and commit 0fe5119e ("net:
      bridge: remove ipv6 zero address check in mcast queries")
      
      The reason is RFC 4541 is not a standard but suggestive. Currently we
      will elect 0.0.0.0 as Querier if there is no ip address configured on
      bridge. If we do not add the port which recives query with source
      0.0.0.0 to router list, the IGMP reports will not be about to forward
      to Querier, IGMP data will also not be able to forward to dest.
      
      As Nikolay suggested, revert this change first and add a boolopt api
      to disable none-zero election in future if needed.
      Reported-by: default avatarLinus Lüssing <linus.luessing@c0d3.blue>
      Reported-by: default avatarSebastian Gottschall <s.gottschall@newmedia-net.de>
      Fixes: 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0")
      Fixes: 0fe5119e ("net: bridge: remove ipv6 zero address check in mcast queries")
      Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
      Acked-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      278e2148
    • Thadeu Lima de Souza Cascardo's avatar
      selftests: fib_tests: sleep after changing carrier. again. · af548a27
      Thadeu Lima de Souza Cascardo authored
      Just like commit e2ba732a ("selftests: fib_tests: sleep after
      changing carrier"), wait one second to allow linkwatch to propagate the
      carrier change to the stack.
      
      There are two sets of carrier tests. The first slept after the carrier
      was set to off, and when the second set ran, it was likely that the
      linkwatch would be able to run again without much delay, reducing the
      likelihood of a race. However, if you run 'fib_tests.sh -t carrier' on a
      loop, you will quickly notice the failures.
      
      Sleeping on the second set of tests make the failures go away.
      
      Cc: David Ahern <dsahern@gmail.com>
      Signed-off-by: default avatarThadeu Lima de Souza Cascardo <cascardo@canonical.com>
      Reviewed-by: default avatarDavid Ahern <dsahern@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      af548a27
  3. 23 Feb, 2019 17 commits
  4. 22 Feb, 2019 5 commits
    • YueHaibing's avatar
      mdio_bus: Fix use-after-free on device_register fails · 6ff7b060
      YueHaibing authored
      KASAN has found use-after-free in fixed_mdio_bus_init,
      commit 0c692d07 ("drivers/net/phy/mdio_bus.c: call
      put_device on device_register() failure") call put_device()
      while device_register() fails,give up the last reference
      to the device and allow mdiobus_release to be executed
      ,kfreeing the bus. However in most drives, mdiobus_free
      be called to free the bus while mdiobus_register fails.
      use-after-free occurs when access bus again, this patch
      revert it to let mdiobus_free free the bus.
      
      KASAN report details as below:
      
      BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482
      Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524
      
      CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
      Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
      Call Trace:
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0xfa/0x1ce lib/dump_stack.c:113
       print_address_description+0x65/0x270 mm/kasan/report.c:187
       kasan_report+0x149/0x18d mm/kasan/report.c:317
       mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482
       fixed_mdio_bus_init+0x283/0x1000 [fixed_phy]
       ? 0xffffffffc0e40000
       ? 0xffffffffc0e40000
       ? 0xffffffffc0e40000
       do_one_initcall+0xfa/0x5ca init/main.c:887
       do_init_module+0x204/0x5f6 kernel/module.c:3460
       load_module+0x66b2/0x8570 kernel/module.c:3808
       __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
       do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      RIP: 0033:0x462e99
      Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
      RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
      RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
      RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003
      RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000
      R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc
      R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004
      
      Allocated by task 3524:
       set_track mm/kasan/common.c:85 [inline]
       __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496
       kmalloc include/linux/slab.h:545 [inline]
       kzalloc include/linux/slab.h:740 [inline]
       mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143
       fixed_mdio_bus_init+0x163/0x1000 [fixed_phy]
       do_one_initcall+0xfa/0x5ca init/main.c:887
       do_init_module+0x204/0x5f6 kernel/module.c:3460
       load_module+0x66b2/0x8570 kernel/module.c:3808
       __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
       do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      Freed by task 3524:
       set_track mm/kasan/common.c:85 [inline]
       __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458
       slab_free_hook mm/slub.c:1409 [inline]
       slab_free_freelist_hook mm/slub.c:1436 [inline]
       slab_free mm/slub.c:2986 [inline]
       kfree+0xe1/0x270 mm/slub.c:3938
       device_release+0x78/0x200 drivers/base/core.c:919
       kobject_cleanup lib/kobject.c:662 [inline]
       kobject_release lib/kobject.c:691 [inline]
       kref_put include/linux/kref.h:67 [inline]
       kobject_put+0x146/0x240 lib/kobject.c:708
       put_device+0x1c/0x30 drivers/base/core.c:2060
       __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382
       fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy]
       do_one_initcall+0xfa/0x5ca init/main.c:887
       do_init_module+0x204/0x5f6 kernel/module.c:3460
       load_module+0x66b2/0x8570 kernel/module.c:3808
       __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
       do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      The buggy address belongs to the object at ffff8881dc824c80
       which belongs to the cache kmalloc-2k of size 2048
      The buggy address is located 248 bytes inside of
       2048-byte region [ffff8881dc824c80, ffff8881dc825480)
      The buggy address belongs to the page:
      page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0
      flags: 0x2fffc0000010200(slab|head)
      raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800
      raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000
      page dumped because: kasan: bad access detected
      
      Memory state around the buggy address:
       ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
       ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
      >ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                                      ^
       ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
       ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
      
      Fixes: 0c692d07 ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure")
      Signed-off-by: default avatarYueHaibing <yuehaibing@huawei.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6ff7b060
    • Kalash Nainwal's avatar
      net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 · 97f0082a
      Kalash Nainwal authored
      Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 to
      keep legacy software happy. This is similar to what was done for
      ipv4 in commit 709772e6 ("net: Fix routing tables with
      id > 255 for legacy software").
      Signed-off-by: default avatarKalash Nainwal <kalash@arista.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      97f0082a
    • David S. Miller's avatar
      Merge branch 'bnxt_en-firmware-message-delay-fixes' · a11f5756
      David S. Miller authored
      Michael Chan says:
      
      ====================
      bnxt_en: firmware message delay fixes.
      
      We were seeing some intermittent firmware message timeouts in our lab and
      these 2 small patches fix them.  Please apply to stable as well.  Thanks.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a11f5756
    • Michael Chan's avatar
      bnxt_en: Wait longer for the firmware message response to complete. · 0000b81a
      Michael Chan authored
      The code waits up to 20 usec for the firmware response to complete
      once we've seen the valid response header in the buffer.  It turns
      out that in some scenarios, this wait time is not long enough.
      Extend it to 150 usec and use usleep_range() instead of udelay().
      
      Fixes: 9751e8e7 ("bnxt_en: reduce timeout on initial HWRM calls")
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0000b81a
    • Michael Chan's avatar
      bnxt_en: Fix typo in firmware message timeout logic. · 67681d02
      Michael Chan authored
      The logic that polls for the firmware message response uses a shorter
      sleep interval for the first few passes.  But there was a typo so it
      was using the wrong counter (larger counter) for these short sleep
      passes.  The result is a slightly shorter timeout period for these
      firmware messages than intended.  Fix it by using the proper counter.
      
      Fixes: 9751e8e7 ("bnxt_en: reduce timeout on initial HWRM calls")
      Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      67681d02