- 27 Feb, 2019 40 commits
-
-
Konstantin Khlebnikov authored
[ Upstream commit 1ec17dbd ] Field idiag_ext in struct inet_diag_req_v2 used as bitmap of requested extensions has only 8 bits. Thus extensions starting from DCTCPINFO cannot be requested directly. Some of them included into response unconditionally or hook into some of lower 8 bits. Extension INET_DIAG_CLASS_ID has not way to request from the beginning. This patch bundle it with INET_DIAG_TCLASS (ipv6 tos), fixes space reservation, and documents behavior for other extensions. Also this patch adds fallback to reporting socket priority. This filed is more widely used for traffic classification because ipv4 sockets automatically maps TOS to priority and default qdisc pfifo_fast knows about that. But priority could be changed via setsockopt SO_PRIORITY so INET_DIAG_TOS isn't enough for predicting class. Also cgroup2 obsoletes net_cls classid (it always zero), but we cannot reuse this field for reporting cgroup2 id because it is 64-bit (ino+gen). So, after this patch INET_DIAG_CLASS_ID will report socket priority for most common setup when net_cls isn't set and/or cgroup2 in use. Fixes: 0888e372 ("net: inet: diag: expose sockets cgroup classid") Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Saeed Mahameed authored
[ Upstream commit 29dded89 ] When an ethernet frame is padded to meet the minimum ethernet frame size, the padding octets are not covered by the hardware checksum. Fortunately the padding octets are usually zero's, which don't affect checksum. However, it is not guaranteed. For example, switches might choose to make other use of these octets. This repeatedly causes kernel hardware checksum fault. Prior to the cited commit below, skb checksum was forced to be CHECKSUM_NONE when padding is detected. After it, we need to keep skb->csum updated. However, fixing up CHECKSUM_COMPLETE requires to verify and parse IP headers, it does not worth the effort as the packets are so small that CHECKSUM_COMPLETE has no significant advantage. Future work: when reporting checksum complete is not an option for IP non-TCP/UDP packets, we can actually fallback to report checksum unnecessary, by looking at cqe IPOK bit. Fixes: 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 173656ac ] If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should not call ip6_err_gen_icmpv6_unreach(). This: ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1 ip link set sit1 up ip addr add 198.51.100.1/24 dev sit1 ping 198.51.100.2 if IPv6 is disabled at boot time, will crash the kernel. v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead, as we only need to check that idev exists and we are under rcu_read_lock() (from netif_receive_skb_internal()). Reported-by:
Jianlin Shi <jishi@redhat.com> Fixes: ca15a078 ("sit: generate icmpv6 error when receiving icmpv4 error") Cc: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 2fdeee25 ] The current opt_inst_list operations inside team_nl_cmd_options_set() is too complex to track: LIST_HEAD(opt_inst_list); nla_for_each_nested(...) { list_for_each_entry(opt_inst, &team->option_inst_list, list) { if (__team_option_inst_tmp_find(&opt_inst_list, opt_inst)) continue; list_add(&opt_inst->tmp_list, &opt_inst_list); } } team_nl_send_event_options_get(team, &opt_inst_list); as while we retrieve 'opt_inst' from team->option_inst_list, it could be added to the local 'opt_inst_list' for multiple times. The __team_option_inst_tmp_find() doesn't work, as the setter team_mode_option_set() still calls team->ops.exit() which uses ->tmp_list too in __team_options_change_check(). Simplify the list operations by moving the 'opt_inst_list' and team_nl_send_event_options_get() into the nla_for_each_nested() loop so that it can be guranteed that we won't insert a same list entry for multiple times. Therefore, __team_option_inst_tmp_find() can be removed too. Fixes: 4fb0534f ("team: avoid adding twice the same option to the event list") Fixes: 2fcdb2c9 ("team: allow to send multiple set events in one message") Reported-by: syzbot+4d4af685432dc0e56c91@syzkaller.appspotmail.com Reported-by: syzbot+68ee510075cf64260cc4@syzkaller.appspotmail.com Cc: Jiri Pirko <jiri@resnulli.us> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit fc228abc ] Jianlin reported a panic when running sctp gso over gre over vlan device: [ 84.772930] RIP: 0010:do_csum+0x6d/0x170 [ 84.790605] Call Trace: [ 84.791054] csum_partial+0xd/0x20 [ 84.791657] gre_gso_segment+0x2c3/0x390 [ 84.792364] inet_gso_segment+0x161/0x3e0 [ 84.793071] skb_mac_gso_segment+0xb8/0x120 [ 84.793846] __skb_gso_segment+0x7e/0x180 [ 84.794581] validate_xmit_skb+0x141/0x2e0 [ 84.795297] __dev_queue_xmit+0x258/0x8f0 [ 84.795949] ? eth_header+0x26/0xc0 [ 84.796581] ip_finish_output2+0x196/0x430 [ 84.797295] ? skb_gso_validate_network_len+0x11/0x80 [ 84.798183] ? ip_finish_output+0x169/0x270 [ 84.798875] ip_output+0x6c/0xe0 [ 84.799413] ? ip_append_data.part.50+0xc0/0xc0 [ 84.800145] iptunnel_xmit+0x144/0x1c0 [ 84.800814] ip_tunnel_xmit+0x62d/0x930 [ip_tunnel] [ 84.801699] gre_tap_xmit+0xac/0xf0 [ip_gre] [ 84.802395] dev_hard_start_xmit+0xa5/0x210 [ 84.803086] sch_direct_xmit+0x14f/0x340 [ 84.803733] __dev_queue_xmit+0x799/0x8f0 [ 84.804472] ip_finish_output2+0x2e0/0x430 [ 84.805255] ? skb_gso_validate_network_len+0x11/0x80 [ 84.806154] ip_output+0x6c/0xe0 [ 84.806721] ? ip_append_data.part.50+0xc0/0xc0 [ 84.807516] sctp_packet_transmit+0x716/0xa10 [sctp] [ 84.808337] sctp_outq_flush+0xd7/0x880 [sctp] It was caused by SKB_GSO_CB(skb)->csum_start not set in sctp_gso_segment. sctp_gso_segment() calls skb_segment() with 'feature | NETIF_F_HW_CSUM', which causes SKB_GSO_CB(skb)->csum_start not to be set in skb_segment(). For TCP/UDP, when feature supports HW_CSUM, CHECKSUM_PARTIAL will be set and gso_reset_checksum will be called to set SKB_GSO_CB(skb)->csum_start. So SCTP should do the same as TCP/UDP, to call gso_reset_checksum() when computing checksum in sctp_gso_segment. Reported-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Russell King authored
[ Upstream commit b5bfc21a ] When we probe a SFP module, we expect to be able to call the upstream device's module_insert() function so that the upstream link can be configured. However, when the upstream device is delayed, we currently may end up probing the module before the upstream device is available, and lose the module_insert() call. Avoid this by holding off probing the module until the SFP bus is properly connected to both the SFP socket driver and the upstream driver. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Kal Conley authored
[ Upstream commit fc62814d ] When calculating rb->frames_per_block * req->tp_block_nr the result can overflow. Check it for overflow without limiting the total buffer size to UINT_MAX. This change fixes support for packet ring buffers >= UINT_MAX. Fixes: 8f8d28e4 ("net/packet: fix overflow in check for tp_frame_nr") Signed-off-by:
Kal Conley <kal.conley@dectris.com> Signed-off-by:
-
Tonghao Zhang authored
[ Upstream commit 218d05ce ] In some case, we may use multiple pedit actions to modify packets. The command shown as below: the last pedit action is effective. $ tc filter add dev netdev_rep parent ffff: protocol ip prio 1 \ flower skip_sw ip_proto icmp dst_ip 3.3.3.3 \ action pedit ex munge ip dst set 192.168.1.100 pipe \ action pedit ex munge eth src set 00:00:00:00:00:01 pipe \ action pedit ex munge eth dst set 00:00:00:00:00:02 pipe \ action csum ip pipe \ action tunnel_key set src_ip 1.1.1.100 dst_ip 1.1.1.200 dst_port 4789 id 100 \ action mirred egress redirect dev vxlan0 To fix it, we add max_mod_hdr_actions to mlx5e_tc_flow_parse_attr struction, max_mod_hdr_actions will store the max pedit action number we support and num_mod_hdr_actions indicates how many pedit action we used, and store all pedit action to mod_hdr_actions. Fixes: d79b6df6 ("net/mlx5e: Add parsing of TC pedit actions to HW format") Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Acked-by:
-
Li RongQing authored
[ Upstream commit d1f20798 ] genlmsg_reply can fail, so propagate its return code Fixes: 915d7e5e ("ipv6: sr: add code base for control plane support of SR-IPv6") Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 4ffcbfac ] KMSAN reported batadv_interface_tx() was possibly using a garbage value [1] batadv_get_vid() does have a pskb_may_pull() call but batadv_interface_tx() does not actually make sure this did not fail. [1] BUG: KMSAN: uninit-value in batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231 CPU: 0 PID: 10006 Comm: syz-executor469 Not tainted 4.20.0-rc7+ #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231 __netdev_start_xmit include/linux/netdevice.h:4356 [inline] netdev_start_xmit include/linux/netdevice.h:4365 [inline] xmit_one net/core/dev.c:3257 [inline] dev_hard_start_xmit+0x607/0xc40 net/core/dev.c:3273 __dev_queue_xmit+0x2e42/0x3bc0 net/core/dev.c:3843 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3876 packet_snd net/packet/af_packet.c:2928 [inline] packet_sendmsg+0x8306/0x8f30 net/packet/af_packet.c:2953 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x441889 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdda6fd468 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 0000000000441889 RDX: 000000000000000e RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00007ffdda6fd4c0 R13: 00007ffdda6fd4b0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2759 [inline] __kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383 __kmalloc_reserve net/core/skbuff.c:137 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:205 alloc_skb include/linux/skbuff.h:998 [inline] alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5220 sock_alloc_send_pskb+0xafd/0x10e0 net/core/sock.c:2083 packet_alloc_skb net/packet/af_packet.c:2781 [inline] packet_snd net/packet/af_packet.c:2872 [inline] packet_sendmsg+0x661a/0x8f30 net/packet/af_packet.c:2953 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Fixes: c6c8fea2 ("net: Add batman-adv meshing protocol") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 7afa81c5 ] A recent commit in Clang expanded the -Wstring-plus-int warning, showing some odd behavior in this file. drivers/isdn/hardware/avm/b1.c:426:30: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int] cinfo->version[j] = "\0\0" + 1; ~~~~~~~^~~ drivers/isdn/hardware/avm/b1.c:426:30: note: use array indexing to silence this warning cinfo->version[j] = "\0\0" + 1; ^ & [ ] 1 warning generated. This is equivalent to just "\0". Nick pointed out that it is smarter to use "" instead of "\0" because "" is used elsewhere in the kernel and can be deduplicated at the linking stage. Link: https://github.com/ClangBuiltLinux/linux/issues/309Suggested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tariq Toukan authored
[ Upstream commit 7fdc1adc ] For representors, the TX dropped counter is not folded from the per-ring counters. Fix it. Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 64254a20 ] The driver currently treats static FDB entries as both static and sticky. This is incorrect and prevents such entries from being roamed to a different port via learning. Fix this by configuring static entries with ageing disabled and roaming enabled. In net-next we can add proper support for the newly introduced 'sticky' flag. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Alexander Petrovskiy <alexpe@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
-
Peter Oskolkov authored
[ Upstream commit f4924f24 ] In sock_setsockopt() (net/core/sock.h), when SO_MARK option is used to change sk_mark, sk_dst_reset(sk) is called. The same should be done in bpf_setsockopt(). Fixes: 8c4b4c7e ("bpf: Add setsockopt helper function to bpf") Reported-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
Peter Oskolkov <posk@google.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Reviewed-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 248b5701 ] When lp55xx_read() fails, "status" is an uninitialized variable and thus may contain random value; using it leads to undefined behaviors. The fix inserts a check for the return value of lp55xx_read: if it fails, returns with its error code. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
Cheng-Min Ao authored
[ Upstream commit f422449b ] Correct a typo in OF device ID table The last one should be 'ti,tmp442' Signed-off-by:
Cheng-Min Ao <tony_ao@wiwynn.com> Signed-off-by:
Yu-Hsiang Chen <matt_chen@wiwynn.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit cb12d72b ] Shifting the 1 by exp by an int can lead to sign-extension overlow when exp is 31 since 1 is an signed int and sign-extending this result to an unsigned long long will set the upper 32 bits. Fix this by shifting an unsigned long. Detected by cppcheck: (warning) Shifting signed 32-bit value by 31 bits is undefined behaviour Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Julia Lawall authored
[ Upstream commit f672b93e ] Add an of_node_put when the result of of_graph_get_remote_port_parent is not available. An of_node_put is also needed when meson_probe_remote completes. This was present at the recursive call, but not in the call from meson_drv_probe. The semantic match that finds this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @r exists@ local idexpression e; expression x; @@ e = of_graph_get_remote_port_parent(...); ... when != x = e when != true e == NULL when != of_node_put(e) when != of_fwnode_handle(e) ( return e; | *return ...; ) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Talons Lee authored
[ Upstream commit 5268c8f3 ] Commit e657fccb clears cpu capability bit instead of using fake cpuid value, the EXTD should always be off for PV guest without depending on cpuid value. So remove the cpuid check in xen_read_msr_safe() to always clear the X2APIC_ENABLE bit. Signed-off-by:
Talons Lee <xin.li@citrix.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Manish Rangankar authored
[ Upstream commit 34a2ce88 ] When the driver finds invalid destination MAC for the first un-reachable target, and before completes the PATH_REQ operation, set new ep_state to OFFLDCONN_NONE so that as part of driver ep_poll mechanism, the upper open-iscsi layer is notified to complete the login process on the first un-reachable target and thus proceed login to other reachable targets. Signed-off-by:
Manish Rangankar <mrangankar@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Stanley Chu authored
[ Upstream commit ce9e7bce ] hba->is_sys_suspended is set after successful system suspend but not clear after successful system resume. According to current behavior, hba->is_sys_suspended will not be set if host is runtime-suspended but not system-suspended. Thus we shall aligh the same policy: clear this flag even if host remains runtime-suspended after ufshcd_system_resume is successfully returned. Simply fix this flag to correct host status logs. Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 2ff33d66 ] The functions isdn_tty_tiocmset() and isdn_tty_set_termios() may be concurrently executed. isdn_tty_tiocmset isdn_tty_modem_hup line 719: kfree(info->dtmf_state); line 721: kfree(info->silence_state); line 723: kfree(info->adpcms); line 725: kfree(info->adpcmr); isdn_tty_set_termios isdn_tty_modem_hup line 719: kfree(info->dtmf_state); line 721: kfree(info->silence_state); line 723: kfree(info->adpcms); line 725: kfree(info->adpcmr); Thus, some concurrency double-free bugs may occur. These possible bugs are found by a static tool written by myself and my manual code review. To fix these possible bugs, the mutex lock "modem_info_mutex" used in isdn_tty_tiocmset() is added in isdn_tty_set_termios(). Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 6dea7e18 ] Since commit b7d0f08e, the enable / disable of PCI device is not managed which will result in IO regions not being automatically unmapped. As regions continue mapped it is currently not possible to remove and then probe again the PCI module of stmmac. Fix this by manually unmapping regions on remove callback. Changes from v1: - Fix build error Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Fixes: b7d0f08e ("net: stmmac: Fix WoL for PCI-based setups") Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Yuchung Cheng authored
[ Upstream commit 31aa6503 ] The existing BPF TCP initial congestion window (TCP_BPF_IW) does not to work on (active) Fast Open sender. This is because it changes the (initial) window only if data_segs_out is zero -- but data_segs_out is also incremented on SYN-data. This patch fixes the issue by proerly accounting for SYN-data additionally. Fixes: fc747810 ("bpf: Adds support for setting initial cwnd") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Reviewed-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Lawrence Brakmo <brakmo@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit 41af167f ] 64bit JAZZ builds failed with linux-next/arch/mips/jazz/jazzdma.c: In function `vdma_init`: /linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`? [-Werror=implicit-function-declaration] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^~~~~~~~~ CKSEG1ADDR /linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^ In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0, from /linux-next/include/linux/compiler.h:248, from /linux-next/include/linux/kernel.h:10, from /linux-next/arch/mips/jazz/jazzdma.c:11: /linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] #define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */ ^ /linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in expansion of macro `_ACAST32_` #define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff) ^~~~~~~~~ /linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of macro `CPHYSADDR` r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl)); Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup fixes this. Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Logan Gunthorpe authored
[ Upstream commit cc29a1b0 ] scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the command size to allocate based on the prot_capabilities. In the isci driver, scsi_host_set_prot() is called after scsi_add_host() so the command size gets calculated to be smaller than it needs to be. Eventually, scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it was sized correctly and a buffer overrun may occur. However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line size, the mistake can go unnoticed. The bug was noticed after the struct request size was reduced by commit 9d037ad7 ("block: remove req->timeout_list") Which likely reduced the allocated space for the request by an entire cache line, enough that the overflow could be hit and it caused a panic, on boot, at: RIP: 0010:t10_pi_complete+0x77/0x1c0 Call Trace: <IRQ> sd_done+0xf5/0x340 scsi_finish_command+0xc3/0x120 blk_done_softirq+0x83/0xb0 __do_softirq+0xa1/0x2e6 irq_exit+0xbc/0xd0 call_function_single_interrupt+0xf/0x20 </IRQ> sd_done() would call scsi_prot_sg_count() which reads the number of entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of the allocated space it reads a garbage number and erroneously calls t10_pi_complete(). To prevent this, the calls to scsi_host_set_prot() are moved into isci_host_alloc() before the call to scsi_add_host(). Out of caution, also move the similar call to scsi_host_set_guard(). Fixes: 3d2d7525 ("[SCSI] isci: T10 DIF support") Link: http://lkml.kernel.org/r/da851333-eadd-163a-8c78-e1f4ec5ec857@deltatee.comSigned-off-by:
Logan Gunthorpe <logang@deltatee.com> Cc: Intel SCU Linux support <intel-linux-scu@intel.com> Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jeff Moyer <jmoyer@redhat.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 72b4a046 ] The return code should be check while qla4xxx_copy_from_fwddb_param fails. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
-
Taehee Yoo authored
[ Upstream commit b91d9036 ] There is no code that decreases the reference count of stateful objects in error path of the nft_add_set_elem(). this causes a leak of reference count of stateful objects. Test commands: $nft add table ip filter $nft add counter ip filter c1 $nft add map ip filter m1 { type ipv4_addr : counter \;} $nft add element ip filter m1 { 1 : c1 } $nft add element ip filter m1 { 1 : c1 } $nft delete element ip filter m1 { 1 } $nft delete counter ip filter c1 Result: Error: Could not process rule: Device or resource busy delete counter ip filter c1 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ At the second 'nft add element ip filter m1 { 1 : c1 }', the reference count of the 'c1' is increased then it tries to insert into the 'm1'. but the 'm1' already has same element so it returns -EEXIST. But it doesn't decrease the reference count of the 'c1' in the error path. Due to a leak of the reference count of the 'c1', the 'c1' can't be removed by 'nft delete counter ip filter c1'. Fixes: 8aeff920 ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Alban Bedel authored
[ Upstream commit 565dc8a4 ] CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF boards, enable it in the default config to get a working setup out of the box. Signed-off-by:
Alban Bedel <albeu@free.fr> Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit bb989501 ] When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will identify a use after free bug: [134.189505] Unable to handle kernel paging request at virtual address 006b6b6b6b6b6b6b [134.197553] Mem abort info: [134.200381] ESR = 0x96000004 [134.203487] Exception class = DABT (current EL), IL = 32 bits [134.209497] SET = 0, FnV = 0 [134.212596] EA = 0, S1PTW = 0 [134.215777] Data abort info: [134.218701] ISV = 0, ISS = 0x00000004 [134.222596] CM = 0, WnR = 0 [134.225606] [006b6b6b6b6b6b6b] address between user and kernel address ranges [134.232851] Internal error: Oops: 96000004 [#1] SMP [134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G OE 4.19.5-1.2.34.aarch64 #1 [134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018 [134.255181] pstate: 20000005 (nzCv daif -PAN -UAO) [134.260044] pc : hns_ae_put_handle+0x38/0x60 [134.264372] lr : hns_ae_put_handle+0x24/0x60 [134.268700] sp : ffff00001be93c50 [134.272054] x29: ffff00001be93c50 x28: ffff802faaec8040 [134.277442] x27: 0000000000000000 x26: 0000000000000000 [134.282830] x25: 0000000056000000 x24: 0000000000000015 [134.288284] x23: ffff0000096fe098 x22: ffff000001050070 [134.293671] x21: ffff801fb3c044a0 x20: ffff80afb75ec098 [134.303287] x19: ffff80afb75ec098 x18: 0000000000000000 [134.312945] x17: 0000000000000000 x16: 0000000000000000 [134.322517] x15: 0000000000000002 x14: 0000000000000000 [134.332030] x13: dead000000000100 x12: ffff7e02bea3c988 [134.341487] x11: ffff80affbee9e68 x10: 0000000000000000 [134.351033] x9 : 6fffff8000008101 x8 : 0000000000000000 [134.360569] x7 : dead000000000100 x6 : ffff000009579748 [134.370059] x5 : 0000000000210d00 x4 : 0000000000000000 [134.379550] x3 : 0000000000000001 x2 : 0000000000000000 [134.388813] x1 : 6b6b6b6b6b6b6b6b x0 : 0000000000000000 [134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd) [134.408498] Call trace: [134.414611] hns_ae_put_handle+0x38/0x60 [134.422208] hnae_put_handle+0xd4/0x108 [134.429563] hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv] [134.438342] platform_drv_remove+0x2c/0x70 [134.445958] device_release_driver_internal+0x174/0x208 [134.454810] driver_detach+0x70/0xd8 [134.461913] bus_remove_driver+0x64/0xe8 [134.469396] driver_unregister+0x34/0x60 [134.476822] platform_driver_unregister+0x20/0x30 [134.485130] hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv] [134.494634] __arm64_sys_delete_module+0x238/0x290 struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is freed, than use hnae_handle will cause use after free panic. This patch frees vf_cb after hnae_handle used. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Denis Bolotin authored
[ Upstream commit 46721c3d ] Make sure chain element is updated before ringing the doorbell. Signed-off-by:
Denis Bolotin <dbolotin@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
Denis Bolotin authored
[ Upstream commit 2d533a92 ] In PBL chains with non power of 2 page count, the producer is not at the beginning of the chain when index is 0 after a wrap. Therefore, after the producer index wrap around, page index should be calculated more carefully. Signed-off-by:
-
YueHaibing authored
[ Upstream commit 1f8ce09b ] Fixes gcc '-Wunused-but-set-variable' warning: drivers/xen/pvcalls-back.c: In function 'pvcalls_sk_state_change': drivers/xen/pvcalls-back.c:286:28: warning: variable 'intf' set but not used [-Wunused-but-set-variable] It not used since e6587cdb ("pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read") Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 9e28989d ] When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will contain random value. Further execution uses "old_adc0" even when mc13xxx_reg_read() fails. The fix checks the return value of mc13xxx_reg_read(), and exits the execution when it fails. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Keerthy authored
[ Upstream commit 75d4c5e0 ] Use devm_regmap_add_irq_chip and clean up error path in probe and also the remove function. Reported-by:
Christian Hohnstaedt <Christian.Hohnstaedt@wago.com> Signed-off-by:
Keerthy <j-keerthy@ti.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit 04c801c1 ] Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Jonathan Marek authored
[ Upstream commit 504e4175 ] This is required as part of the initialization sequence on certain SoCs. If these registers are not initialized, the hardware can be unresponsive. This fixes the driver on apq8060 (HP TouchPad device). Signed-off-by:
Jonathan Marek <jonathan@marek.ca> Signed-off-by:
-
Dien Pham authored
[ Upstream commit b0aff01e ] Because BD9571MWV_DVFS_MONIVDAC is not defined in the volatile table, the physical register value is not updated by regmap and DVFS doesn't work as expected. Fix it! Fixes: d3ea2127 ("mfd: Add ROHM BD9571MWV-M MFD PMIC driver") Signed-off-by:
Dien Pham <dien.pham.ry@renesas.com> [wsa: rebase, add 'Fixes', reword commit message] Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 10628e3e ] This function is supposed to return zero on success or negative error codes on error. Unfortunately, there is a bug so it sometimes returns non-zero, positive numbers on success. I noticed this bug during review and I can't test it. It does appear that the return is sometimes propogated back to _regmap_read() where all non-zero returns are treated as failure so this may affect run time. Fixes: 47c16975 ("mfd: Align ab8500 with the abx500 interface") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Nicolas Boichat authored
[ Upstream commit a177276a ] If the PMIC ID is unknown, the current code would call irq_domain_remove and panic, as pmic->irq_domain is only initialized by mt6397_irq_init. Return immediately with an error, if the chip ID is unsupported. Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Signed-off-by:
-
