- 22 Mar, 2017 4 commits
-
-
David Ahern authored
The VRF driver takes a reference to the inet6_dev on the VRF device for its rt6_local dst when handling local traffic through the VRF device as a loopback. When the device is deleted the driver does a put on the idev but does not reset rt6i_idev in the rt6_info struct. When the dst is destroyed, dst_destroy calls ip6_dst_destroy which does a second put for what is essentially the same reference causing it to be prematurely freed. Reset rt6i_idev after the put in the vrf driver. Fixes: b4869aa2 ("net: vrf: ipv6 support for local traffic to local addresses") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We could allocate less memory than intended because we do: bnad->regdata = kzalloc(len << 2, GFP_KERNEL); The shift can overflow leading to a crash. This is debugfs code so the impact is very small. Fixes: 7afc5dbd ("bna: Add debugfs interface.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Rasesh Mody <rasesh.mody@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
This is a Dell branded Sierra Wireless EM7455. It is operating in MBIM mode by default, but can be configured to provide two QMI/RMNET functions. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
skb_cow(skb, sizeof(ip header)) is not very helpful in this context. First we need to use pskb_may_pull() to make sure the ip header is in skb linear part, then use skb_try_make_writable() to address clones issues. Fixes: 4c30719f ("[PKT_SCHED] dsmark: handle cloned and non-linear skb's") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 21 Mar, 2017 9 commits
-
-
Yaroslav Isakov authored
Added missing logic in tun driver, which prevents apps to set offloads using tun ioctl, if offloads were previously disabled via ethtool Signed-off-by:
Yaroslav Isakov <yaroslav.isakov@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrey Ulanov authored
Dmitry has reported that a BUG_ON() condition in unix_notinflight() may be triggered by a simple code that forwards unix socket in an SCM_RIGHTS message. That is caused by incorrect unix socket GC implementation in unix_gc(). The GC first collects list of candidates, then (a) decrements their "children's" inflight counter, (b) checks which inflight counters are now 0, and then (c) increments all inflight counters back. (a) and (c) are done by calling scan_children() with inc_inflight or dec_inflight as the second argument. Commit 6209344f ("net: unix: fix inflight counting bug in garbage collector") changed scan_children() such that it no longer considers sockets that do not have UNIX_GC_CANDIDATE flag. It also added a block of code that that unsets this flag _before_ invoking scan_children(, dec_iflight, ). This may lead to incorrect inflight counters for some sockets. This change fixes this bug by changing order of operations: UNIX_GC_CANDIDATE is now unset only after all inflight counters are restored to the original state. kernel BUG at net/unix/garbage.c:149! RIP: 0010:[<ffffffff8717ebf4>] [<ffffffff8717ebf4>] unix_notinflight+0x3b4/0x490 net/unix/garbage.c:149 Call Trace: [<ffffffff8716cfbf>] unix_detach_fds.isra.19+0xff/0x170 net/unix/af_unix.c:1487 [<ffffffff8716f6a9>] unix_destruct_scm+0xf9/0x210 net/unix/af_unix.c:1496 [<ffffffff86a90a01>] skb_release_head_state+0x101/0x200 net/core/skbuff.c:655 [<ffffffff86a9808a>] skb_release_all+0x1a/0x60 net/core/skbuff.c:668 [<ffffffff86a980ea>] __kfree_skb+0x1a/0x30 net/core/skbuff.c:684 [<ffffffff86a98284>] kfree_skb+0x184/0x570 net/core/skbuff.c:705 [<ffffffff871789d5>] unix_release_sock+0x5b5/0xbd0 net/unix/af_unix.c:559 [<ffffffff87179039>] unix_release+0x49/0x90 net/unix/af_unix.c:836 [<ffffffff86a694b2>] sock_release+0x92/0x1f0 net/socket.c:570 [<ffffffff86a6962b>] sock_close+0x1b/0x20 net/socket.c:1017 [<ffffffff81a76b8e>] __fput+0x34e/0x910 fs/file_table.c:208 [<ffffffff81a771da>] ____fput+0x1a/0x20 fs/file_table.c:244 [<ffffffff81483ab0>] task_work_run+0x1a0/0x280 kernel/task_work.c:116 [< inline >] exit_task_work include/linux/task_work.h:21 [<ffffffff8141287a>] do_exit+0x183a/0x2640 kernel/exit.c:828 [<ffffffff8141383e>] do_group_exit+0x14e/0x420 kernel/exit.c:931 [<ffffffff814429d3>] get_signal+0x663/0x1880 kernel/signal.c:2307 [<ffffffff81239b45>] do_signal+0xc5/0x2190 arch/x86/kernel/signal.c:807 [<ffffffff8100666a>] exit_to_usermode_loop+0x1ea/0x2d0 arch/x86/entry/common.c:156 [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [<ffffffff81009693>] syscall_return_slowpath+0x4d3/0x570 arch/x86/entry/common.c:259 [<ffffffff881478e6>] entry_SYSCALL_64_fastpath+0xc4/0xc6 Link: https://lkml.org/lkml/2017/3/6/252Signed-off-by:
Andrey Ulanov <andreyu@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Fixes: 6209344f ("net: unix: fix inflight counting bug in garbage collector") Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Peng Tao says: ==================== vsock: cancel connect packets when failing to connect Currently, if a connect call fails on a signal or timeout (e.g., guest is still in the process of starting up), we'll just return to caller and leave the connect packet queued and they are sent even though the connection is considered a failure, which can confuse applications with unwanted false connect attempt. The patchset enables vsock (both host and guest) to cancel queued packets when a connect attempt is considered to fail. v5 changelog: - change virtio_vsock_pkt->cancel_token back to virtio_vsock_pkt->vsk v4 changelog: - drop two unnecessary void * cast - update new callback comment v3 changelog: - define cancel_pkt callback in struct vsock_transport rather than struct virtio_transport - rename virtio_vsock_pkt->vsk to virtio_vsock_pkt->cancel_token v2 changelog: - fix queued_replies counting and resume tx/rx when necessary ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peng Tao authored
Otherwise we'll leave the packets queued until releasing vsock device. E.g., if guest is slow to start up, resulting ETIMEDOUT on connect, guest will get the connect requests from failed host sockets. Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
Peng Tao <bergwolf@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peng Tao authored
Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Peng Tao <bergwolf@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peng Tao authored
To allow canceling all packets of a connection. Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
Peng Tao <bergwolf@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Peng Tao authored
So that we can cancel a queued pkt later if necessary. Signed-off-by:
Peng Tao <bergwolf@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
On Tue, Mar 14, 2017 at 10:44:10AM +0100, Dmitry Vyukov wrote: > > Yes, please. > Disregarding some reports is not a good way long term. Please try this patch. ---8<--- Subject: netlink: Annotate nlk cb_mutex by protocol Currently all occurences of nlk->cb_mutex are annotated by lockdep as a single class. This causes a false lcokdep cycle involving genl and crypto_user. This patch fixes it by dividing cb_mutex into individual classes based on the netlink protocol. As genl and crypto_user do not use the same netlink protocol this breaks the false dependency loop. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
The list rx_done would be initialized when the linking on occurs. Therefore, if a napi is scheduled without any linking on before, the following kernel panic would happen. BUG: unable to handle kernel NULL pointer dereference at 000000000000008 IP: [<ffffffffc085efde>] r8152_poll+0xe1e/0x1210 [r8152] PGD 0 Oops: 0002 [#1] SMP Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 17 Mar, 2017 9 commits
-
-
Eric Dumazet authored
Commit b369e7fd ("tcp: make TCP_INFO more consistent") moved lock_sock_fast() earlier in tcp_get_info() This has the minor effect that jiffies value being sampled at the beginning of tcp_get_info() is more likely to be off by one, and we report big tcpi_last_data_sent values (like 0xFFFFFFFF). Since we lock the socket, fetching tcp_time_stamp right before doing the jiffies_to_msecs() calls is enough to remove these wrong values. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
When device is being setup on boot, there is a small race where network device callback is registered, but the netvsc_device pointer is not set yet. This can cause a NULL ptr dereference if packet arrives during this window. Fixes: 46b4f7f5 ("netvsc: eliminate per-device outstanding send counter") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
WANG Cong authored
Andrei reported a false alarm of lockdep at net/bridge/br_fdb.c:109, this is because in Andrei's case, a spin_bug() was already triggered before this, therefore the debug_locks is turned off, lockdep_is_held() is no longer accurate after that. We should use lockdep_assert_held_once() instead of lockdep_is_held() to respect debug_locks. Fixes: 410b3d48 ("bridge: fdb: add proper lock checks in searching functions") Reported-by:
Andrei Vagin <avagin@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Howells authored
If we receive a BUSY packet for a call we think we've just completed, the packet is handed off to the connection processor to deal with - but the connection processor doesn't expect a BUSY packet and so flags a protocol error. Fix this by simply ignoring the BUSY packet for the moment. The symptom of this may appear as a system call failing with EPROTO. This may be triggered by pressing ctrl-C under some circumstances. This comes about we abort calls due to interruption by a signal (which we shouldn't do, but that's going to be a large fix and mostly in fs/afs/). What happens is that we abort the call and may also abort follow up calls too (this needs offloading somehoe). So we see a transmission of something like the following sequence of packets: DATA for call N ABORT call N DATA for call N+1 ABORT call N+1 in very quick succession on the same channel. However, the peer may have deferred the processing of the ABORT from the call N to a background thread and thus sees the DATA message from the call N+1 coming in before it has cleared the channel. Thus it sends a BUSY packet[*]. [*] Note that some implementations (OpenAFS, for example) mark the BUSY packet with one plus the callNumber of the call prior to call N. Ordinarily, this would be call N, but there's no requirement for the calls on a channel to be numbered strictly sequentially (the number is required to increase). This is wrong and means that the callNumber in the BUSY packet should be ignored (it really ought to be N+1 since that's what it's in response to). Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nathan Fontenot authored
The pointer array for the tx/rx sub crqs should be free'ed when releasing the tx/rx sub crqs. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Anycast routes have the RTF_ANYCAST flag set, but when dumping routes for userspace the route type is not set to RTN_ANYCAST. Make it so. Fixes: 58c4fb86 ("[IPV6]: Flag RTF_ANYCAST for anycast routes") CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Ahern authored
Alive tracking of nexthops can account for a link twice if the carrier goes down followed by an admin down of the same link rendering multipath routes useless. This is similar to 79099aab for UNREGISTER events and DOWN events. Fix by tracking number of alive nexthops in mpls_ifdown similar to the logic in mpls_ifup. Checking the flags per nexthop once after all events have been processed is simpler than trying to maintian a running count through all event combinations. Also, WRITE_ONCE is used instead of ACCESS_ONCE to set rt_nhn_alive per a comment from checkpatch: WARNING: Prefer WRITE_ONCE(<FOO>, <BAR>) over ACCESS_ONCE(<FOO>) = <BAR> Fixes: c89359a4 ("mpls: support for dead routes") Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Acked-by:
Robert Shearman <rshearma@brocade.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Arcari authored
When the aquantia device mtu is changed the net_device structure is not updated. As a result the ip command does not properly reflect the mtu change. Commit 5513e164 incorrectly assumed that __dev_set_mtu() was making the assignment ndev->mtu = new_mtu; This is not true in the case where the driver has a ndo_change_mtu routine. Fixes: 5513e164 ("net: ethernet: aquantia: Fixes for aq_ndev_change_mtu") Cc: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by:
David Arcari <darcari@redhat.com> Tested-by:
Pavel Belous <pavel.belous@aquantia.com> Reviewed-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
Some Hypervisors detach VFs from VMs by instantly causing an FLR event to be generated for a VF. In the mlx4 case, this will cause that VF's comm channel to be disabled before the VM has an opportunity to invoke the VF device's "shutdown" method. For such Hypervisors, there is a race condition between the VF's shutdown method and its internal-error detection/reset thread. The internal-error detection/reset thread (which runs every 5 seconds) also detects a disabled comm channel. If the internal-error detection/reset flow wins the race, we still get delays (while that flow tries repeatedly to detect comm-channel recovery). The cited commit fixed the command timeout problem when the internal-error detection/reset flow loses the race. This commit avoids the unneeded delays when the internal-error detection/reset flow wins. Fixes: d585df1c ("net/mlx4_core: Avoid command timeouts during VF driver device shutdown") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Reported-by:
Simon Xiao <sixiao@microsoft.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 16 Mar, 2017 3 commits
-
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== Here are two batman-adv bugfixes: - Keep fragments equally sized, avoids some problems with too small fragments, by Sven Eckelmann - Initialize gateway class correctly when BATMAN V is compiled in, by Sven Eckelmann ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kris Murphy authored
Added a case for OVS_TUNNEL_KEY_ATTR_PAD to the switch statement in ip_tun_from_nlattr in order to prevent the default case returning an error. Fixes: b46f6ded ("libnl: nla_put_be64(): align on a 64-bit area") Signed-off-by:
Kris Murphy <kriskend@linux.vnet.ibm.com> Acked-by:
Joe Stringer <joe@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
Sowmini pointed out Dmitry's RTNL deadlock report to me, and it turns out to be perfectly accurate - there are various error paths that miss unlock of the RTNL. To fix those, change the locking a bit to not be conditional in all those nl80211_prepare_*_dump() functions, but make those require the RTNL to start with, and fix the buggy error paths. This also let me use sparse (by appropriately overriding the rtnl_lock/rtnl_unlock functions) to validate the changes. Cc: stable@vger.kernel.org Reported-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 15 Mar, 2017 13 commits
-
-
Eric Dumazet authored
I mistakenly added the code to release sk->sk_frag in sk_common_release() instead of sk_destruct() TCP sockets using sk->sk_allocation == GFP_ATOMIC do no call sk_common_release() at close time, thus leaking one (order-3) page. iSCSI is using such sockets. Fixes: 5640f768 ("net: use a per task frag allocator") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Lendacky, Thomas authored
Newer hardware does not provide a cumulative payload length when multiple descriptors are needed to handle the data. Once the MTU increases beyond the size that can be handled by a single descriptor, the SKB does not get built properly by the driver. The driver will now calculate the size of the data buffers used by the hardware. The first buffer of the first descriptor is for packet headers or packet headers and data when the headers can't be split. Subsequent descriptors in a multi-descriptor chain will not use the first buffer. The second buffer is used by all the descriptors in the chain for payload data. Based on whether the driver is processing the first, intermediate, or last descriptor it can calculate the buffer usage and build the SKB properly. Tested and verified on both old and new hardware. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Suspending the PHY would be putting it in a low power state where it may no longer allow us to do Wake-on-LAN. Fixes: cc013fb4 ("net: bcmgenet: correctly suspend and resume PHY device") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pablo Neira authored
macvlan.c file seems to be both in VLAN and MACVLAN DRIVER, so remove the MACVLAN DRIVER since this is redundant. I propose with this patch to remove the VLAN (802.1Q) entry so this just falls into the NETWORKING [GENERAL]. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, a rather large batch of fixes targeted to nf_tables, conntrack and bridge netfilter. More specifically, they are: 1) Don't track fragmented packets if the socket option IP_NODEFRAG is set. From Florian Westphal. 2) SCTP protocol tracker assumes that ICMP error messages contain the checksum field, what results in packet drops. From Ying Xue. 3) Fix inconsistent handling of AH traffic from nf_tables. 4) Fix new bitmap set representation with big endian. Fix mismatches in nf_tables due to incorrect big endian handling too. Both patches from Liping Zhang. 5) Bridge netfilter doesn't honor maximum fragment size field, cap to largest fragment seen. From Florian Westphal. 6) Fake conntrack entry needs to be aligned to 8 bytes since the 3 LSB bits are now used to store the ctinfo. From Steven Rostedt. 7) Fix element comments with the bitmap set type. Revert the flush field in the nft_set_iter structure, not required anymore after fixing up element comments. 8) Missing error on invalid conntrack direction from nft_ct, also from Liping Zhang. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
When dealing with ipv6 source tunnel key address attribute (OVS_TUNNEL_KEY_ATTR_IPV6_SRC) we are wrongly setting the tunnel dst ip, fix that. Fixes: 6b26ba3a ('openvswitch: netlink attributes for IPv6 tunneling') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reported-by:
Paul Blakey <paulb@mellanox.com> Acked-by:
Jiri Benc <jbenc@redhat.com> Acked-by:
Joe Stringer <joe@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Taku Izumi authored
This patch fixes netdev->features for Extended Socket network device. Currently Extended Socket network device's netdev->feature claims NETIF_F_HW_CSUM, however this is completely wrong. There's no feature of checksum offloading. That causes invalid TCP/UDP checksum and packet rejection when IP forwarding from Extended Socket network device to other network device. NETIF_F_HW_CSUM should be omitted. Signed-off-by:
Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a rather large set of fixes. The bulk are for lpfc correcting a lot of issues in the new NVME driver code which just went in in the merge window. The others are: - fix a hang in the vmware paravirt driver caused by incorrect handling of the new MSI vector allocation - long standing bug in storvsc, which recent block changes turned from being a harmless annoyance into a hang - yet more fallout (in mpt3sas) from the changes to device blocking The remainder are small fixes and updates" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (34 commits) scsi: lpfc: Add shutdown method for kexec scsi: storvsc: Workaround for virtual DVD SCSI version scsi: lpfc: revise version number to 11.2.0.10 scsi: lpfc: code cleanups in NVME initiator discovery scsi: lpfc: code cleanups in NVME initiator base scsi: lpfc: correct rdp diag portnames scsi: lpfc: remove dead sli3 nvme code scsi: lpfc: correct double print scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNT scsi: lpfc: Rework lpfc Kconfig for NVME options scsi: lpfc: add transport eh_timed_out reference scsi: lpfc: Fix eh_deadline setting for sli3 adapters. scsi: lpfc: add NVME exchange aborts scsi: lpfc: Fix nvme allocation bug on failed nvme_fc_register_localport scsi: lpfc: Fix IO submission if WQ is full scsi: lpfc: Fix NVME CMD IU byte swapped word 1 problem scsi: lpfc: Fix RCTL value on NVME LS request and response scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters scsi: lpfc: fix missing spin_unlock on sql_list_lock scsi: lpfc: don't dereference dma_buf->iocbq before null check ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 fix from Bob Peterson: "This is an emergency patch for 4.11-rc3 The GFS2 developers uncovered a really nasty problem that can lead to random corruption and kernel panic, much like the last one. Andreas Gruenbacher wrote a simple one-line patch to fix the problem." * tag 'gfs2-4.11-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Avoid alignment hole in struct lm_lockname
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: - self-test failure of crc32c on powerpc - regressions of ecb(aes) when used with xts/lrw in s5p-sss - a number of bugs in the omap RNG driver * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: s5p-sss - Fix spinlock recursion on LRW(AES) hwrng: omap - Do not access INTMASK_REG on EIP76 hwrng: omap - use devm_clk_get() instead of of_clk_get() hwrng: omap - write registers after enabling the clock crypto: s5p-sss - Fix completing crypto request in IRQ handler crypto: powerpc - Fix initialisation of crc32c context
-
Liping Zhang authored
We should jump to invoke __nft_ct_set_destroy() instead of just return error. Fixes: edee4f1e ("netfilter: nft_ct: add zone id set support") Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Andreas Gruenbacher authored
Commit 88ffbf3e switches to using rhashtables for glocks, hashing over the entire struct lm_lockname instead of its individual fields. On some architectures, struct lm_lockname contains a hole of uninitialized memory due to alignment rules, which now leads to incorrect hash values. Get rid of that hole. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> CC: <stable@vger.kernel.org> #v4.3+
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver, from Steffen Klassert. 2) Fix crashes when user tries to get_next_key on an LPM bpf map, from Alexei Starovoitov. 3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from Michal Schmidt. 4) We can get a divide by zero when TCP socket are morphed into listening state, fix from Eric Dumazet. 5) Fix socket refcounting bugs in skb_complete_wifi_ack() and skb_complete_tx_timestamp(). From Eric Dumazet. 6) Use after free in dccp_feat_activate_values(), also from Eric Dumazet. 7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from Jarod Wilson. 8) Fix use after free in vrf_xmit(), from David Ahern. 9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from Alexey Kodanev. 10) Properly check napi_complete_done() return value in order to decide whether to re-enable IRQs or not in amd-xgbe driver, from Thomas Lendacky. 11) Fix double free of hwmon device in marvell phy driver, from Andrew Lunn. 12) Don't crash on malformed netlink attributes in act_connmark, from Etienne Noss. 13) Don't remove routes with a higher metric in ipv6 ECMP route replace, from Sabrina Dubroca. 14) Don't write into a cloned SKB in ipv6 fragmentation handling, from Florian Westphal. 15) Fix routing redirect races in dccp and tcp, basically the ICMP handler can't modify the socket's cached route in it's locked by the user at this moment. From Jon Maxwell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits) qed: Enable iSCSI Out-of-Order qed: Correct out-of-bound access in OOO history qed: Fix interrupt flags on Rx LL2 qed: Free previous connections when releasing iSCSI qed: Fix mapping leak on LL2 rx flow qed: Prevent creation of too-big u32-chains qed: Align CIDs according to DORQ requirement mlxsw: reg: Fix SPVMLR max record count mlxsw: reg: Fix SPVM max record count net: Resend IGMP memberships upon peer notification. dccp: fix memory leak during tear-down of unsuccessful connection request tun: fix premature POLLOUT notification on tun devices dccp/tcp: fix routing redirect race ucc/hdlc: fix two little issue vxlan: fix ovs support net: use net->count to check whether a netns is alive or not bridge: drop netfilter fake rtable unconditionally ipv6: avoid write to a possibly cloned skb net: wimax/i2400m: fix NULL-deref at probe isdn/gigaset: fix NULL-deref at probe ...
-
- 14 Mar, 2017 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fixes from Tejun Heo: "Three cgroup fixes. Nothing critical: - the pids controller could trigger suspicious RCU warning spuriously. Fixed. - in the debug controller, %p -> %pK to protect kernel pointer from getting exposed. - documentation formatting fix" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroups: censor kernel pointer in debug files cgroup/pids: remove spurious suspicious RCU usage warning cgroup: Fix indenting in PID controller documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata fixes from Tejun Heo: "Three libata fixes: - fix for a circular reference bug in sysfs code which prevented pata_legacy devices from being released after probe failure, which in turn prevented devres from releasing the associated resources. - drop spurious WARN in the command issue path which can be triggered by a legitimate passthrough command. - an ahci_qoriq specific fix" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: qoriq: correct the sata ecc setting error libata: drop WARN from protocol error in ata_sff_qc_issue() libata: transport: Remove circular dependency at free time
-