- 23 Mar, 2010 11 commits
-
-
Sage Weil authored
Make variable name slightly more generic, since it will (soon) reflect either the time the request was sent OR the time it was last determined to be still retrying. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
The messenger fault was clearing the BUSY bit, for reasons unclear. This made it possible for the con->ops->fault function to reopen the connection, and requeue work in the workqueue--even though the current thread was already in con_work. This avoids a problem where the client busy loops with connection failures on an unreachable OSD, but doesn't address the root cause of that problem. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
Prevent duplicate 'mds0 caps stale' message from spamming the console every few seconds while the MDS restarts. Set s_renew_requested earlier, so that we only print the message once, even if we don't send an actual request. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
The incremental map decoding of pg pool updates wasn't skipping the snaps and removed_snaps vectors. This caused osd requests to stall when pool snapshots were created or fs snapshots were deleted. Use a common helper for full and incremental map decoders that decodes pools properly. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
We were releasing used caps (e.g. FILE_CACHE) from encode_inode_release with MDS requests (e.g. setattr). We don't carry refs on most caps, so this code worked most of the time, but for setattr (utimes) we try to drop Fscr. This causes cap state to get slightly out of sync with reality, and may result in subsequent mds revoke messages getting ignored. Fix by only releasing unused caps. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
Drop session mutex unconditionally in handle_cap_grant, and do the check_caps from the handle_cap_grant helper. This avoids using a magic return value. Also avoid using a flag variable in the IMPORT case and call check_caps at the appropriate point. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
Passing a session pointer to ceph_check_caps() used to mean it would leave the session mutex locked. That wasn't always possible if it wasn't passed CHECK_CAPS_AUTHONLY. If could unlock the passed session and lock a differet session mutex, which was clearly wrong, and also emitted a warning when it a racing CPU retook it and we did an unlock from the wrong context. This was only a problem when there was more than one MDS. First, make ceph_check_caps unconditionally drop the session mutex, so that it is free to lock other sessions as needed. Then adjust the one caller that passes in a session (handle_cap_grant) accordingly. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
If we don't have the exported cap it's because we already released it. No need to WARN. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
This causes an oops when debug output is enabled and we kick an osd request with no current r_osd (sometime after an osd failure). Check the pointer before dereferencing. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
Previously we would decode state directly into our current ticket_handler. This is problematic if for some reason we fail to decode, because we end up with half new state and half old state. We are probably already in bad shape if we get an update we can't decode, but we may as well be tidy anyway. Decode into new_* temporaries and update the ticket_handler only on success. Signed-off-by: Sage Weil <sage@newdream.net>
-
- 21 Mar, 2010 6 commits
-
-
Sage Weil authored
Release the old ticket_blob buffer when we get an updated service ticket from the monitor. Previously these were getting leaked. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
The buffer size was incorrectly calculated for the ceph_x_encrypt() encapsulated ticket blob. Use a helper (with correct arithmetic) and BUG out if we were wrong. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
We were failing to reconnect to services due to an old authenticator, even though we had the new ticket, because we weren't properly retrying the connect handshake, because we were calling an old/incorrect helper that left in_base_pos incorrect. The result was a failure to reconnect to the OSD or MDS (with an authentication error) if the MDS restarted after the service had been up a few hours (long enough for the original authenticator to be invalid). This was only a problem if the AUTH_X authentication was enabled. Now that the 'negotiate' and 'connect' stages are fully separated, we should use the prepare_read_connect() helper instead, and remove the obsolete one. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
When an inode was dropped while being migrated between two MDSs, i_cap_exporting_issued was non-zero such that issue caps were non-zero and __ceph_is_any_caps(ci) was true. This prevented the inode from being removed from the snap realm, even as it was dropped from the cache. Fix this by dropping any residual i_snap_realm ref in destroy_inode. Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
All ci->i_snap_realm_item/realm->inodes_with_caps manipulation should be protected by realm->inodes_with_caps_lock. This bug would have only bit us in a rare race with a realm split (during some snap creations). Signed-off-by: Sage Weil <sage@newdream.net>
-
Sage Weil authored
Added assertion, and cleared one case where the implemented caps were not following the issued caps. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
-
- 20 Mar, 2010 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: remove duplicated #include sh: Export uncached helper symbols. sh: Fix up NUMA build for 29-bit. serial: sh-sci: Fix build failure for non-sh architectures. sh: Fix up uncached offset for legacy 29-bit mode. sh: Support CPU affinity masks for INTC controllers.
-
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwbLinus Torvalds authored
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: remove duplicate cpu_to_le16() uwb: declare MODULE_FIRMWARE() in i1480 DFU driver uwb: make USB device id table constant uwb: wlp: refactor wlp_get_<attribute>() macros
-
- 19 Mar, 2010 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: fix compile errors in dma-mapping-common.h alpha: remove trailing spaces in messages alpha: use __ratelimit
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Remove IOMMU_VMERGE config option powerpc: Fix swiotlb to respect the boot option powerpc: Do not call prink when CONFIG_PRINTK is not defined powerpc: Use correct ccr bit for syscall error status powerpc/fsl-booke: Get coherent bit from PTE powerpc/85xx: Make sure lwarx hint isn't set on ppc32
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6Linus Torvalds authored
* 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: Delete zero-length file drivers/mtd/maps/omap_nor.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty_port,usb-console: Fix usb serial console open/close regression tty: cpm_uart: use resource_size() tty_buffer: Fix distinct type warning hvc_console: Fix race between hvc_close and hvc_remove uartlite: Fix build on sparc. tty: Take a 256 byte padding into account when buffering below sub-page units Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: driver core: numa: fix BUILD_BUG_ON for node_read_distance driver-core: document ERR_PTR() return values kobject: documentation: Update to refer to kset-example.c. sysdev: the cpu probe/release attributes should be sysdev_class_attributes kobject: documentation: Fix erroneous example in kobject doc. driver-core: fix missing kernel-doc in firmware_class Driver core: Early platform kernel-doc update sysfs: fix sysfs lockdep warning in mlx4 code sysfs: fix sysfs lockdep warning in infiniband code sysfs: fix sysfs lockdep warning in ipmi code sysfs: Initialised pci bus legacy_mem field before use sysfs: use sysfs_bin_attr_init in firmware class driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (45 commits) USB: gadget/multi: cdc_do_config: remove redundant check usb: r8a66597-hcd: fix removed from an attached hub USB: xhci: Make endpoint interval debugging clearer. USB: Fix usb_fill_int_urb for SuperSpeed devices USB: cp210x: Remove double usb_control_msg from cp210x_set_config USB: Remove last bit of CONFIG_USB_BERRY_CHARGE USB: gadget: add gadget controller number for s3c-hsotg driver USB: ftdi_sio: Fix locking for change_speed() function USB: g_mass_storage: fixed module name in Kconfig USB: gadget: f_mass_storage::fsg_bind(): fix error handling USB: g_mass_storage: fix section mismatch warnings USB: gadget: fix Blackfin builds after gadget cleansing USB: goku_udc: remove potential null dereference USB: option.c: Add Pirelli VID/PID and indicate Pirelli's modem interface is 0xff USB: serial: Fix module name typo for qcaux Kconfig entry. usb: cdc-wdm: Fix deadlock between write and resume usb: cdc-wdm: Fix order in disconnect and fix locking usb: cdc-wdm:Fix loss of data due to autosuspend usb: cdc-wdm: Fix submission of URB after suspension usb: cdc-wdm: Fix race between disconnect and debug messages ...
-
Jeff Garzik authored
The content was deleted in cc87edb1, but the file remained as a zero-length file. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (205 commits) ceph: update for write_inode API change ceph: reset osd after relevant messages timed out ceph: fix flush_dirty_caps race with caps migration ceph: include migrating caps in issued set ceph: fix osdmap decoding when pools include (removed) snaps ceph: return EBADF if waiting for caps on closed file ceph: set osd request message front length correctly ceph: reset front len on return to msgpool; BUG on mismatched front iov ceph: fix snaptrace decoding on cap migration between mds ceph: use single osd op reply msg ceph: reset bits on connection close ceph: remove bogus mds forward warning ceph: remove fragile __map_osds optimization ceph: fix connection fault STANDBY check ceph: invalidate_authorizer without con->mutex held ceph: don't clobber write return value when using O_SYNC ceph: fix client_request_forward decoding ceph: drop messages on unregistered mds sessions; cleanup ceph: fix comments, locking in destroy_inode ceph: move dereference after NULL test ... Fix trivial conflicts in Documentation/ioctl/ioctl-number.txt
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: trivial white space [CIFS] checkpatch cleanup cifs: add cifs_revalidate_file cifs: add a CIFSSMBUnixQFileInfo function cifs: add a CIFSSMBQFileInfo function cifs: overhaul cifs_revalidate and rename to cifs_revalidate_dentry
-
Peter Korsgaard authored
cdc_do_config() had a double ret check after fsg_add(). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Yoshihiro Shimoda authored
fix the problem that when a USB hub is attached to the r8a66597-hcd and a device is removed from that hub, it's likely that a kernel panic follows. Reported-by: Markus Pietrek <Markus.Pietrek@emtrion.de> Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Sarah Sharp authored
The xHCI hardware can only handle polling intervals that are a power of two. When we add a new endpoint during a bandwidth allocation, and the polling interval is rounded down to a power of two, print the original polling interval in the endpoint descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Matthew Wilcox authored
USB 3 and Wireless USB specify a logarithmic encoding of the endpoint interval that matches the USB 2 specification. usb_fill_int_urb() didn't know that and was filling in the interval as if it was USB 1.1. Fix usb_fill_int_urb() for SuperSpeed devices, but leave the wireless case alone, because David Vrabel wants to keep the old encoding. Update the struct urb kernel doc to note that SuperSpeed URBs must have urb->interval specified in microframes. Add a missing break statement in the usb_submit_urb() interrupt URB checking, since wireless USB and SuperSpeed USB encode urb->interval differently. This allows xHCI roothubs to actually register with khubd. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Michael Brunner authored
This patch removes a double usb_control_msg that sets the cp210x configuration registers a second time when calling cp210x_set_config. For data sizes >2 the second write gets corrupted. The patch has been created against 2.6.34-rc1, but all cp210x driver revisions are affected. Signed-off-by: Michael Brunner <mibru@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Christoph Egger authored
One last bit was missed while removing the USB_BERRY_CHARGE config option in a8d4211f which gets dropped by this patch. Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Maurus Cuelenaere authored
This prevents some drivers from complaining that no bcdDevice id was set. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alessio Igor Bogani authored
The change_speed() function should be serialized against multiple calls. Use the cfg_lock mutex to do this. Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Michal Nazarewicz authored
The Kconfig help message for Mass Storage Gadget claimed the module will be named "g_file_storage" whereas it should be "g_mass_storage". Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Peter Korsgaard authored
Contrary to the comment in fsg_add, fsg_bind calls fsg_unbind on errors, which decreases refcount and frees the fsg_dev structure, causing trouble when fsg_add does the same. Fix it by simply leaving up cleanup to fsg_add(). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Mike Frysinger authored
The recent commit (0e530b45) that moved usb_ep_autoconfig from the __devinit section to the __init section missed the mass storage device. Its fsg_bind() function uses the usb_ep_autoconfig() function from non __init context leading to: WARNING: drivers/usb/gadget/g_mass_storage.o(.text): Section mismatch in reference from the function _fsg_bind() to the function .init.text:_usb_ep_autoconfig() So move fsg_bind() into __init as well. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-