- 29 Jan, 2018 6 commits
-
-
Kelvin Cao authored
Allow using Switchtec NTB in setups that have more than two partitions. Note: this does not enable having multi-host communication, it only allows for a single NTB link between two hosts in a network that might have more than two. Use following logic to determine the NT peer partition: 1) If there are 2 partitions, and the target vector is set in the Switchtec configuration, use the partition specified in target vector. 2) If there are 2 partitions and target vector is unset use the only other partition as specified in the NT EP map. 3) If there are more than 2 partitions and target vector is set use the other partition specified in target vector. 4) If there are more than 2 partitions and target vector is unset, this is invalid and report an error. Signed-off-by: Kelvin Cao <kelvin.cao@microsemi.com> [logang@deltatee.com: commit message fleshed out] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
-
Jon Mason authored
Trivial addition of "\n" to the dev_* prints where necessary Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_err error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-By: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
-
Dave Jiang authored
Removing dead code since this is not being used. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
-
Greg Kroah-Hartman authored
There is no need to #define the license of the driver, just put it in the MODULE_LICENSE() line directly as a text string. This allows tools that check that the module license matches the source code license to work properly, as there is no need to unwind the unneeded dereference, especially when the string is defined just a few lines above the usage of it. Reported-and-reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <Allen.Hubbe@emc.com> Cc: Gary R Hook <gary.hook@amd.com> Cc: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
-
Doug Meyer authored
This resolves a bug which may incorrectly configure the peer host's LUT for shared memory window access. The code was using the local host's first BAR number, rather than the peer hosts's first BAR number, to determine what peer NT control register to program. The bug will cause the Switchtec NTB link to work only if both peers have the same first NTB BAR configured. In all other configurations, the link will not come up, failing silently. When both hosts have the same first BAR, the configuration works only because the first BAR numbers happent to be the same. When the hosts do not have the same first BAR, then the LUT translation will not be configured in the correct peer LUT and will not give the peer the shared memory window access required for the link to operate. Signed-off-by: Doug Meyer <dmeyer@gigaio.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Fixes: 678784a44ae8 ("NTB: switchtec_ntb: Initialize hardware for memory windows") Signed-off-by: Jon Mason <jdmason@kudzu.us>
-
- 28 Jan, 2018 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 retpoline fixlet from Thomas Gleixner: "Remove the ESP/RSP thunks for retpoline as they cannot ever work. Get rid of them before they show up in a release" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/retpoline: Remove the esp/rsp thunk
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of small fixes for 4.15: - Fix vmapped stack synchronization on systems with 4-level paging and a large amount of memory caused by a missing 5-level folding which made the pgd synchronization logic to fail and causing double faults. - Add a missing sanity check in the vmalloc_fault() logic on 5-level paging systems. - Bring back protection against accessing a freed initrd in the microcode loader which was lost by a wrong merge conflict resolution. - Extend the Broadwell micro code loading sanity check. - Add a missing ENDPROC annotation in ftrace assembly code which makes ORC unhappy. - Prevent loading the AMD power module on !AMD platforms. The load itself is uncritical, but an unload attempt results in a kernel crash. - Update Peter Anvins role in the MAINTAINERS file" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ftrace: Add one more ENDPROC annotation x86: Mark hpa as a "Designated Reviewer" for the time being x86/mm/64: Tighten up vmalloc_fault() sanity checks on 5-level kernels x86/mm/64: Fix vmapped stack syncing on very-large-memory 4-level systems x86/microcode: Fix again accessing initrd after having been freed x86/microcode/intel: Extend BDW late-loading further with LLC size check perf/x86/amd/power: Do not load AMD power module on !AMD platforms
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single fix for a ~10 years old problem which causes high resolution timers to stop after a CPU unplug/plug cycle due to a stale flag in the per CPU hrtimer base struct. Paul McKenney was hunting this for about a year, but the heisenbug nature made it resistant against debug attempts for quite some time" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Reset hrtimer cpu base proper on CPU hotplug
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single bug fix to prevent a subtle deadlock in the scheduler core code vs cpu hotplug" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Fix cpu.max vs. cpuhotplug deadlock
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Four patches which all address lock inversions and deadlocks in the perf core code and the Intel debug store" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix perf,x86,cpuhp deadlock perf/core: Fix ctx::mutex deadlock perf/core: Fix another perf,trace,cpuhp lock inversion perf/core: Fix lock inversion between perf,trace,cpuhp
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Thomas Gleixner: "Two final locking fixes for 4.15: - Repair the OWNER_DIED logic in the futex code which got wreckaged with the recent fix for a subtle race condition. - Prevent the hard lockup detector from triggering when dumping all held locks in the system" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Avoid triggering hardlockup from debug_show_all_locks() futex: Fix OWNER_DEAD fixup
-
Josh Poimboeuf authored
When ORC support was added for the ftrace_64.S code, an ENDPROC for function_hook() was missed. This results in the following warning: arch/x86/kernel/ftrace_64.o: warning: objtool: .entry.text+0x0: unreachable instruction Fixes: e2ac83d7 ("x86/ftrace: Fix ORC unwinding from ftrace handlers") Reported-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20180128022150.dqierscqmt3uwwsr@treble
-
- 27 Jan, 2018 2 commits
-
-
Thomas Gleixner authored
The hrtimer interrupt code contains a hang detection and mitigation mechanism, which prevents that a long delayed hrtimer interrupt causes a continous retriggering of interrupts which prevent the system from making progress. If a hang is detected then the timer hardware is programmed with a certain delay into the future and a flag is set in the hrtimer cpu base which prevents newly enqueued timers from reprogramming the timer hardware prior to the chosen delay. The subsequent hrtimer interrupt after the delay clears the flag and resumes normal operation. If such a hang happens in the last hrtimer interrupt before a CPU is unplugged then the hang_detected flag is set and stays that way when the CPU is plugged in again. At that point the timer hardware is not armed and it cannot be armed because the hang_detected flag is still active, so nothing clears that flag. As a consequence the CPU does not receive hrtimer interrupts and no timers expire on that CPU which results in RCU stalls and other malfunctions. Clear the flag along with some other less critical members of the hrtimer cpu base to ensure starting from a clean state when a CPU is plugged in. Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the root cause of that hard to reproduce heisenbug. Once understood it's trivial and certainly justifies a brown paperbag. Fixes: 41d2e494 ("hrtimer: Tune hrtimer_interrupt hang logic") Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos
-
H. Peter Anvin authored
Due to some unfortunate events, I have not been directly involved in the x86 kernel patch flow for a while now. I have also not been able to ramp back up by now like I had hoped to, and after reviewing what I will need to work on both internally at Intel and elsewhere in the near term, it is clear that I am not going to be able to ramp back up until late 2018 at the very earliest. It is not acceptable to not recognize that this load is currently taken by Ingo and Thomas without my direct participation, so I mark myself as R: (designated reviewer) rather than M: (maintainer) until further notice. This is in fact recognizing the de facto situation for the past few years. I have obviously no intention of going away, and I will do everything within my power to improve Linux on x86 and x86 for Linux. This, however, puts credit where it is due and reflects a change of focus. This patch also removes stale entries for portions of the x86 architecture which have not been maintained separately from arch/x86 for a long time. If there is a reason to re-introduce them then that can happen later. Signed-off-by: H. Peter Anvin <h.peter.anvin@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bruce Schlobohm <bruce.schlobohm@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180125195934.5253-1-hpa@zytor.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
- 26 Jan, 2018 13 commits
-
-
Linus Torvalds authored
Merge tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V update from Palmer Dabbelt: "RISC-V: We have a new mailing list and git repo! Sorry to send something essentially as late as possible (Friday after an rc9), but we managed to get a mailing list for the RISC-V Linux port. We've been using patches@groups.riscv.org for a while, but that list has some problems (it's Google Groups and it's shared over all RISC-V software projects). The new infaread.org list is much better. We just got it on Wednesday but I used it a bit on Thursday to shake out all the configuration problems and it appears to be in working order. When I updated the mailing list I noticed that the MAINTAINERS file was pointing to our github repo, but now that we have a kernel.org repo I'd like to point to that instead so I changed that as well. We'll be centralizing all RISC-V Linux related development here as that seems to be the saner way to go about it. I can understand if it's too late to get this into 4.15, but given that it's not a code change I was hoping it'd still be OK. It would be nice to have the new mailing list and git repo in the release tarballs so when people start to find bugs they'll get to the right place" * tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: Update the RISC-V MAINTAINERS file
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) The per-network-namespace loopback device, and thus its namespace, can have its teardown deferred for a long time if a kernel created TCP socket closes and the namespace is exiting meanwhile. The kernel keeps trying to finish the close sequence until it times out (which takes quite some time). Fix this by forcing the socket closed in this situation, from Dan Streetman. 2) Fix regression where we're trying to invoke the update_pmtu method on route types (in this case metadata tunnel routes) that don't implement the dst_ops method. Fix from Nicolas Dichtel. 3) Fix long standing memory corruption issues in r8169 driver by performing the chip statistics DMA programming more correctly. From Francois Romieu. 4) Handle local broadcast sends over VRF routes properly, from David Ahern. 5) Don't refire the DCCP CCID2 timer endlessly, otherwise the socket can never be released. From Alexey Kodanev. 6) Set poll flags properly in VSOCK protocol layer, from Stefan Hajnoczi. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: VSOCK: set POLLOUT | POLLWRNORM for TCP_CLOSING dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed state net: vrf: Add support for sends to local broadcast address r8169: fix memory corruption on retrieval of hardware statistics. net: don't call update_pmtu unconditionally net: tcp: close sock if net namespace is exiting
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "A fairly urgent nouveau regression fix for broken irqs across suspend/resume came in. This was broken before but a patch in 4.15 has made it much more obviously broken and now s/r fails a lot more often. The fix removes freeing the irq across s/r which never should have been done anyways. Also two vc4 fixes for a NULL deference and some misrendering / flickering on screen" * tag 'drm-fixes-for-v4.15-rc10-2' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: Move irq setup/teardown to pci ctor/dtor drm/vc4: Fix NULL pointer dereference in vc4_save_hang_state() drm/vc4: Flush the caches before the bin jobs, as well.
-
Stefan Hajnoczi authored
select(2) with wfds but no rfds must return when the socket is shut down by the peer. This way userspace notices socket activity and gets -EPIPE from the next write(2). Currently select(2) does not return for virtio-vsock when a SEND+RCV shutdown packet is received. This is because vsock_poll() only sets POLLOUT | POLLWRNORM for TCP_CLOSE, not the TCP_CLOSING state that the socket is in when the shutdown is received. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Kodanev authored
ccid2_hc_tx_rto_expire() timer callback always restarts the timer again and can run indefinitely (unless it is stopped outside), and after commit 120e9dab ("dccp: defer ccid_hc_tx_delete() at dismantle time"), which moved ccid_hc_tx_delete() (also includes sk_stop_timer()) from dccp_destroy_sock() to sk_destruct(), this started to happen quite often. The timer prevents releasing the socket, as a result, sk_destruct() won't be called. Found with LTP/dccp_ipsec tests running on the bonding device, which later couldn't be unloaded after the tests were completed: unregister_netdevice: waiting for bond0 to become free. Usage count = 148 Fixes: 2a91aa39 ("[DCCP] CCID2: Initial CCID2 (TCP-Like) implementation") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Palmer Dabbelt authored
Now that we're upstream in Linux we've been able to make some infrastructure changes so our port works a bit more like other ports. Specifically: * We now have a mailing list specific to the RISC-V Linux port, hosted at lists.infreadead.org. * We now have a kernel.org git tree where work on our port is coordinated. This patch changes the RISC-V maintainers entry to reflect these new bits of infrastructure. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
-
Andy Lutomirski authored
On a 5-level kernel, if a non-init mm has a top-level entry, it needs to match init_mm's, but the vmalloc_fault() code skipped over the BUG_ON() that would have checked it. While we're at it, get rid of the rather confusing 4-level folded "pgd" logic. Cleans-up: b50858ce ("x86/mm/vmalloc: Add 5-level paging support") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Neil Berrington <neil.berrington@datacore.com> Link: https://lkml.kernel.org/r/2ae598f8c279b0a29baf75df207e6f2fdddc0a1b.1516914529.git.luto@kernel.org
-
Andy Lutomirski authored
Neil Berrington reported a double-fault on a VM with 768GB of RAM that uses large amounts of vmalloc space with PTI enabled. The cause is that load_new_mm_cr3() was never fixed to take the 5-level pgd folding code into account, so, on a 4-level kernel, the pgd synchronization logic compiles away to exactly nothing. Interestingly, the problem doesn't trigger with nopti. I assume this is because the kernel is mapped with global pages if we boot with nopti. The sequence of operations when we create a new task is that we first load its mm while still running on the old stack (which crashes if the old stack is unmapped in the new mm unless the TLB saves us), then we call prepare_switch_to(), and then we switch to the new stack. prepare_switch_to() pokes the new stack directly, which will populate the mapping through vmalloc_fault(). I assume that we're getting lucky on non-PTI systems -- the old stack's TLB entry stays alive long enough to make it all the way through prepare_switch_to() and switch_to() so that we make it to a valid stack. Fixes: b50858ce ("x86/mm/vmalloc: Add 5-level paging support") Reported-and-tested-by: Neil Berrington <neil.berrington@datacore.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: stable@vger.kernel.org Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/346541c56caed61abbe693d7d2742b4a380c5001.1516914529.git.luto@kernel.org
-
git://github.com/skeggsb/linuxDave Airlie authored
Single irq regression fix * 'linux-4.15' of git://github.com/skeggsb/linux: drm/nouveau: Move irq setup/teardown to pci ctor/dtor
-
David Ahern authored
Sukumar reported that sends to the local broadcast address (255.255.255.255) are broken. Check for the address in vrf driver and do not redirect to the VRF device - similar to multicast packets. With this change sockets can use SO_BINDTODEVICE to specify an egress interface and receive responses. Note: the egress interface can not be a VRF device but needs to be the enslaved device. https://bugzilla.kernel.org/show_bug.cgi?id=198521Reported-by: Sukumar Gopalakrishnan <sukumarg1973@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Francois Romieu authored
Hardware statistics retrieval hurts in tight invocation loops. Avoid extraneous write and enforce strict ordering of writes targeted to the tally counters dump area address registers. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Oliver Freyermuth <o.freyermuth@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "The main item is that we try to better handle the newer trackpoints on Lenovo devices that are now being produced by Elan/ALPS/NXP and only implement a small subset of the original IBM trackpoint controls" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01" Input: trackpoint - only expose supported controls for Elan, ALPS and NXP Input: trackpoint - force 3 buttons if 0 button is reported Input: xpad - add support for PDP Xbox One controllers Input: stmfts,s6sy671 - add SPDX identifier
-
Martin Brandenburg authored
After do_readv_writev, the inode cache is invalidated anyway, so i_size will never be read. It will be fetched from the server which will also know about updates from other machines. Fixes deadlock on 32-bit SMP. See https://marc.info/?l=linux-fsdevel&m=151268557427760&w=2Signed-off-by: Martin Brandenburg <martin@omnibond.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mike Marshall <hubcap@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 25 Jan, 2018 11 commits
-
-
Lyude Paul authored
For a while we've been having issues with seemingly random interrupts coming from nvidia cards when resuming them. Originally the fix for this was thought to be just re-arming the MSI interrupt registers right after re-allocating our IRQs, however it seems a lot of what we do is both wrong and not even nessecary. This was made apparent by what appeared to be a regression in the mainline kernel that started introducing suspend/resume issues for nouveau: a0c9259d (irq/matrix: Spread interrupts on allocation) After this commit was introduced, we started getting interrupts from the GPU before we actually re-allocated our own IRQ (see references below) and assigned the IRQ handler. Investigating this turned out that the problem was not with the commit, but the fact that nouveau even free/allocates it's irqs before and after suspend/resume. For starters: drivers in the linux kernel haven't had to handle freeing/re-allocating their IRQs during suspend/resume cycles for quite a while now. Nouveau seems to be one of the few drivers left that still does this, despite the fact there's no reason we actually need to since disabling interrupts from the device side should be enough, as the kernel is already smart enough to know to disable host-side interrupts for us before going into suspend. Since we were tearing down our IRQs by hand however, that means there was a short period during resume where interrupts could be received before we re-allocated our IRQ which would lead to us getting an unhandled IRQ. Since we never handle said IRQ and re-arm the interrupt registers, this would cause us to miss all of the interrupts from the GPU and cause our init process to start timing out on anything requiring interrupts. So, since this whole setup/teardown every suspend/resume cycle is useless anyway, move irq setup/teardown into the pci subdev's ctor/dtor functions instead so they're only called at driver load and driver unload. This should fix most of the issues with pending interrupts on resume, along with getting suspend/resume for nouveau to work again. As well, this probably means we can also just remove the msi rearm call inside nvkm_pci_init(). But since our main focus here is to fix suspend/resume before 4.15, we'll save that for a later patch. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Mike Galbraith <efault@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Nicolas Dichtel authored
Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to: "BUG: unable to handle kernel NULL pointer dereference at (null)" Let's add a helper to check if update_pmtu is available before calling it. Fixes: 52a589d5 ("geneve: update skb dst pmtu on tx path") Fixes: a93bf0ff ("vxlan: update skb dst pmtu on tx path") CC: Roman Kapl <code@rkapl.cz> CC: Xin Long <lucien.xin@gmail.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "Fix races and a potential use after free in the s390 cmma migration code" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: add proper locking for CMMA migration bitmap
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fix from David Sterba: "It's been reported recently that readdir can list stale entries under some conditions. Fix it." * tag 'for-4.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix stale entries in readdir
-
Dan Streetman authored
When a tcp socket is closed, if it detects that its net namespace is exiting, close immediately and do not wait for FIN sequence. For normal sockets, a reference is taken to their net namespace, so it will never exit while the socket is open. However, kernel sockets do not take a reference to their net namespace, so it may begin exiting while the kernel socket is still open. In this case if the kernel socket is a tcp socket, it will stay open trying to complete its close sequence. The sock's dst(s) hold a reference to their interface, which are all transferred to the namespace's loopback interface when the real interfaces are taken down. When the namespace tries to take down its loopback interface, it hangs waiting for all references to the loopback interface to release, which results in messages like: unregister_netdevice: waiting for lo to become free. Usage count = 1 These messages continue until the socket finally times out and closes. Since the net namespace cleanup holds the net_mutex while calling its registered pernet callbacks, any new net namespace initialization is blocked until the current net namespace finishes exiting. After this change, the tcp socket notices the exiting net namespace, and closes immediately, releasing its dst(s) and their reference to the loopback interface, which lets the net namespace continue exiting. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711407 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=97811Signed-off-by: Dan Streetman <ddstreet@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peter Zijlstra authored
More lockdep gifts, a 5-way lockup race: perf_event_create_kernel_counter() perf_event_alloc() perf_try_init_event() x86_pmu_event_init() __x86_pmu_event_init() x86_reserve_hardware() #0 mutex_lock(&pmc_reserve_mutex); reserve_ds_buffer() #1 get_online_cpus() perf_event_release_kernel() _free_event() hw_perf_event_destroy() x86_release_hardware() #0 mutex_lock(&pmc_reserve_mutex) release_ds_buffer() #1 get_online_cpus() #1 do_cpu_up() perf_event_init_cpu() #2 mutex_lock(&pmus_lock) #3 mutex_lock(&ctx->mutex) sys_perf_event_open() mutex_lock_double() #3 mutex_lock(ctx->mutex) #4 mutex_lock_nested(ctx->mutex, 1); perf_try_init_event() #4 mutex_lock_nested(ctx->mutex, 1) x86_pmu_event_init() intel_pmu_hw_config() x86_add_exclusive() #0 mutex_lock(&pmc_reserve_mutex) Fix it by using ordering constructs instead of locking. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Lockdep noticed the following 3-way lockup scenario: sys_perf_event_open() perf_event_alloc() perf_try_init_event() #0 ctx = perf_event_ctx_lock_nested(1) perf_swevent_init() swevent_hlist_get() #1 mutex_lock(&pmus_lock) perf_event_init_cpu() #1 mutex_lock(&pmus_lock) #2 mutex_lock(&ctx->mutex) sys_perf_event_open() mutex_lock_double() #2 mutex_lock() #0 mutex_lock_nested() And while we need that perf_event_ctx_lock_nested() for HW PMUs such that they can iterate the sibling list, trying to match it to the available counters, the software PMUs need do no such thing. Exclude them. In particular the swevent triggers the above invertion, while the tpevent PMU triggers a more elaborate one through their event_mutex. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Lockdep noticed the following 3-way lockup race: perf_trace_init() #0 mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() tp_event->class->reg() := tracepoint_probe_register #1 mutex_lock(&tracepoints_mutex) trace_point_add_func() #2 static_key_enable() #2 do_cpu_up() perf_event_init_cpu() #3 mutex_lock(&pmus_lock) #4 mutex_lock(&ctx->mutex) perf_ioctl() #4 ctx = perf_event_ctx_lock() _perf_iotcl() ftrace_profile_set_filter() #0 mutex_lock(&event_mutex) Fudge it for now by noting that the tracepoint state does not depend on the event <-> context relation. Ugly though :/ Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Peter Zijlstra authored
Lockdep gifted us with noticing the following 4-way lockup scenario: perf_trace_init() #0 mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() tp_event->class->reg() := tracepoint_probe_register #1 mutex_lock(&tracepoints_mutex) trace_point_add_func() #2 static_key_enable() #2 do_cpu_up() perf_event_init_cpu() #3 mutex_lock(&pmus_lock) #4 mutex_lock(&ctx->mutex) perf_event_task_disable() mutex_lock(¤t->perf_event_mutex) #4 ctx = perf_event_ctx_lock() #5 perf_event_for_each_child() do_exit() task_work_run() __fput() perf_release() perf_event_release_kernel() #4 mutex_lock(&ctx->mutex) #5 mutex_lock(&event->child_mutex) free_event() _free_event() event->destroy() := perf_trace_destroy #0 mutex_lock(&event_mutex); Fix that by moving the free_event() out from under the locks. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Two vc4 fixes that were applied in the last day. One fixes a NULL dereference, and the other fixes a flickering bug. Cc: Eric Anholt <eric@anholt.net> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> * tag 'drm-misc-fixes-2018-01-24' of git://anongit.freedesktop.org/drm/drm-misc: drm/vc4: Fix NULL pointer dereference in vc4_save_hang_state() drm/vc4: Flush the caches before the bin jobs, as well.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Avoid negative netdev refcount in error flow of xfrm state add, from Aviad Yehezkel. 2) Fix tcpdump decoding of IPSEC decap'd frames by filling in the ethernet header protocol field in xfrm{4,6}_mode_tunnel_input(). From Yossi Kuperman. 3) Fix a syzbot triggered skb_under_panic in pppoe having to do with failing to allocate an appropriate amount of headroom. From Guillaume Nault. 4) Fix memory leak in vmxnet3 driver, from Neil Horman. 5) Cure out-of-bounds packet memory access in em_nbyte EMATCH module, from Wolfgang Bumiller. 6) Restrict what kinds of sockets can be bound to the KCM multiplexer and also disallow when another layer has attached to the socket and made use of sk_user_data. From Tom Herbert. 7) Fix use before init of IOTLB in vhost code, from Jason Wang. 8) Correct STACR register write bit definition in IBM emac driver, from Ivan Mikhaylov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/ibm/emac: wrong bit is used for STA control register write net/ibm/emac: add 8192 rx/tx fifo size vhost: do not try to access device IOTLB when not initialized vhost: use mutex_lock_nested() in vhost_dev_lock_vqs() i40e: flower: check if TC offload is enabled on a netdev qed: Free reserved MR tid qed: Remove reserveration of dpi for kernel kcm: Check if sk_user_data already set in kcm_attach kcm: Only allow TCP sockets to be attached to a KCM mux net: sched: fix TCF_LAYER_LINK case in tcf_get_base_ptr net: sched: em_nbyte: don't add the data offset twice mlxsw: spectrum_router: Don't log an error on missing neighbor vmxnet3: repair memory leak ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL pppoe: take ->needed_headroom of lower device into account on xmit xfrm: fix boolean assignment in xfrm_get_type_offload xfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP version xfrm: fix error flow in case of add state fails xfrm: Add SA to hardware at the end of xfrm_state_construct()
-