ks_sdio_card structure description does not have a kernel doc format
comment.

Add kernel doc format comment to struct ks_sdio_card.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently driver uses a hardware information struct description to
group some SDIO related functionality (work, work queue, sdio private
data pointer). This structure is then embedded in the device private
data structure. Having nested structures described in different header
files means that to view the device private data programmers must open
two header files. This structure could be embedded anonymously in the
device private data and achieve the same result (grouping of function
specific to SDIO) without the need to open multiple headers. However,
the SDIO private data structure already has various different data and
pointers, adding the embedded structure adds little extra meaning and
lengthens all the dereferences throughout the driver, often meaning
addition line breaks and braces. We can increase readability and
reduce code complexity by moving the hardware information data and
pointers to directly be within the device private data structure
description.

While preparing for this refactoring it was noted that the identifier
currently used for the delayed work is 'rw_wq', this is confusing
since the 'wq' suffix typically means 'work queue'. This identifier
would be more meaningful if it used the suffix 'dwork' as does the
declaration of queue_delayed_work() (include/linux/workqueue.h).

The identifier for the work queue is currently 'ks7010sdio_wq'. This
identifier can be shortened without loss of meaning because there is
only one work queue within the driver. Identifier 'wq' is typical
within in-tree driver code and aptly describes the pointer.

Current pointer to the SDIO private data is identified by 'sdio_card',
this is sufficiently meaningful from within the hw_info structure but
once the hw_info_t structure is removed the pointer would be better to
have a prefix appended to it to retain the prior level of meaning.

Move members from struct hw_info_t to struct ks_wlan_private.

Rename identifiers;
struct delayed_work pointer 'rw_wq' to 'rw_dwork'.
struct workqueue_struct pointer 'ks7010sdio_wq' to 'wq'.
struct ks_sdio_card  pointer 'sdio_card' to 'ks_sdio_card'.

Remove structure description hw_info_t. Fix init/destroy calls. Fix
all call sites, SDIO private data access calls, and queuing calls.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently a pointer to the tasklet_struct used for bottom half
processing on the receive path is within the hw_info_t structure. This
structure is then embedded in the device private data
structure. Having the tasklet_struct nested does not add meaning to
the device private data, device private data already (and typically)
has various data relating to the device, there is no real need to
separate the tasklet_struct to a SDIO specific structure. While not
adding allot of extra meaning having the nested structure means the
programmer must open two header files to read the description of the
device private data, the code would be easier to read if the device
private data struct description was not spread over two files.

Move tasklet_struct out of sdio header file and into the device
private data structure description.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

struct work_struct uses identifier ks_wlan_wakeup_task, this is
confusing because the 'task' suffix implies that this is a
tasklet_struct instead of a work struct. Suffix 'work' would be more
clear. The code would be easier to read if it followed the principle
of least surprise and used the 'work' suffix for a work_struct
identifier.

Rename work_struct structure 'ks_wlan_wakeup_task' to 'wakeup_work'.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SDIO header file does not use kernel doc format struct
comments. Adding them aids readability and enables documentation to be
built from the source code. Other comments may be tidied up as we do this.

Add kernel format struct comments. Tidy up comments.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

complete_handler() takes void * types as parameters. void * parameters are then
cast to struct types. Call sites for this function either pass in NULL
or pointers to the struct types cast to void *. This casting is
unnecessary and can be removed.

Struct tx_device_buffer (which contains a pointer member to the
complete_handler() function) has as member 'ks_wlan_priv *priv' this is
unnecessary, we always have a pointer to this struct there is no need
to store it here.

The complete_handler can be more clearly defined by using struct
pointer types instead of void * types. The code is currently
unnecessarily complex, storing and passing extraneous pointer
parameters.

Remove unnecessary parameters, unnecessary casting to/from 'void
*'. Fix all call sites involving complete_handler().
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Header has multiple constants defined using preprocessor
directive. In the cases where these are an integer progression an
enumeration type can be used. Doing so adds documentation to the code
and makes the usage explicit. Maintain original constant value, this
value is returned by the device.

Replace (integer progression) preprocessor constants with enumeration
type.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SDIO header currently defines unused constants READ_STATUS_BUSY and
WRITE_STATUS_IDLE. There are reciprocal constants that are used
READ_STATUS_IDLE and WRITE_STATUS_BUSY. We can roll these into a
single enumeration type and remove the two that are unused.

Add enumeration type containing IDLE/BUSY pair that are currently used
within the SDIO source. Change source to use new enum types.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

$ make includecheck | grep staging
./drivers/staging/greybus/uart.c: linux/serial.h is included more than once.
Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes:
$ make versioncheck | grep staging
./drivers/staging/greybus/light.c: 15 linux/version.h not needed.
Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The struct lu_dirpage elements in lustre_idl.h file are modified to
__le64 and __le32 types since the  elements are always converted from
litte endian to processor native format in mdc_request.c file.

Following warnings are removed by this fix.

drivers/staging/lustre/lustre/mdc/mdc_request.c:958:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:959:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:962:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:963:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:985:50: warning: cast to restricted __le32
drivers/staging/lustre/lustre/mdc/mdc_request.c:1193:24: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1328:25: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1329:23: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1332:25: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1333:23: warning: cast to restricted __le64
Signed-off-by: Skanda Guruanand <skanda.kashyap@gmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This resolves a checkpatch warning that "Single statement macros should
not use a do {} while (0) loop" by removing the loop and adjusting line
length accordingly.
Signed-off-by: Craig Inches <Craig@craiginches.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The cport_quiesce() method is mandatory in the case of
the es2 Greybus hd controller to shutdown the cports on
the es2 controller.
In order to add support of another controller which may not
need to shutdown its cports, make the cport_quiesce() optional,
and check if the controller implement it before to use it.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Makefile / Kconfig currently controlling compilation of this code is:

clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP)     += vlv2_plat_clock.o

atomisp/Kconfig:menuconfig INTEL_ATOMISP
atomisp/Kconfig:        bool "Enable support to Intel MIPI camera drivers"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init was already not in use by this driver, the init
ordering remains unchanged with this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: linux-media@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes a strange 'list' file in
drivers/staging/media/atomisp/pci/atomisp2/ that was not being used for
anything.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Previous patches deleted files, but the Makefile still referenced their
.o files.  Fix this up by removing them in the Makefile.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver SDIO private data structure description includes a spin_lock
that is never used. This data structure only contains a pointer to the
sdio_func and a pointer to the main device private data. A spin_lock
is not required here.

Remove unused spin_lock.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver SDIO header describes a structure that is never used. It can be
safely removed.

Remove unused structure description.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver SDIO code allocates memory for a buffer that is never used. It
can be safely removed.

Remove unused buffer, including allocation and freeing of memory.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver SDIO code initializes a completion that is never used. It can
be safely removed.

Remove unused completion.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

char array cmd is being scanned in using a %4s scanf format
specifier and so cmd must be an array of 5 chars. Increase size
to 5 chars to ensure we don't have an overflow.

Detected with static analysis by cppcheck:

"(error) Width 4 given in format string (no. 1) is larger than
destination buffer 'cmd[4]', use %3s to prevent overflowing it."
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre_cfg_new() returns error pointers and never NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed extra space before comma in memset() as a part of
checkpatch.pl fix-up.
Signed-off-by: Valerio Genovese <valerio.click@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In combination with CONFIG_PROFILE_ANNOTATED_BRANCHES=y, the unlikely()
inside of the WARN() macro becomes too complex for gcc to see that
we don't use the output arguments of mt9m114_to_res() are used
correctly:

drivers/staging/media/atomisp/i2c/mt9m114.c: In function 'mt9m114_get_fmt':
drivers/staging/media/atomisp/i2c/mt9m114.c:817:13: error: 'height' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  int width, height;
             ^~~~~~
drivers/staging/media/atomisp/i2c/mt9m114.c: In function 'mt9m114_s_exposure_selection':
drivers/staging/media/atomisp/i2c/mt9m114.c:1179:13: error: 'height' may be used uninitialized in this function [-Werror=maybe-uninitialized]

Without WARN_ON(), there is no problem, so by simply replacing it with
v4l2_err(), the warnings go away. The WARN() output is also not needed
here, as we'd probably catch the problem before even getting here,
and other checks for the same condition already use v4l2_err.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UDS is another layer which actually boils down to some trivial assignments so
remove it so inline the code.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These are not used in the driver so can go away.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a whole pile of code that wraps a single assignment. Remove it and
put the assignment in the caller. Once we have the kernels sorted we should
revisit these and remove all the pointless 1 item structs that go with it.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This isn't used so it can go in the bitbucket.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The base hmm MMU code doesn't support contiguous allocations (they BUG), so
remove support from them from the higher levels of the heirarchy.

We still need to unwind all these layers but it turns out that some of the init
order stuff is rather sensitive and the simple cleanup breaks everything
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Where we know the buffer size is reasonably constrained we can just use kmalloc,
and where it will be large vmalloc. This still leaves a pile in the middle.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We have one hard coded set of behaviour so unpick the indirection and function
pointers. This isn't the whole story. A lot of the callers are known sizes and
use cases so we can switch them directly to kmalloc later on.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We are not using these for debugging or debug logging so remove the defines,
trim and rename the functions.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

They can be replaced by kmalloc. There are a few that do need to pick kmalloc
or vmalloc. Those we leave for the moment.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The line which is initializing mipi_info variable is too long
to read. It would be placed in next line.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The address of isp->asd[i] is already assigned to
local "asd" variable. "&isp->asd[i]" would be replaced with
just "asd".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Enable/Disable ISP irq is switched with "enable" parameter of
enable_isp_irq(). It would be better splited to two such as
enable_isp_irq()/disable_isp_irq().

But the enable_isp_irq() is no use in atomisp_cmd.c file.
So remove the enable_isp_irq() function and add
disable_isp_irq function only.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

trivial fix to spelling mistake in dev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Define new local variable to reduce the number of reference.
The new local variable is added to save the addess of dfs
and used in atomisp_freq_scaling() function.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function uses an if statement within a for loop to guard a block of
code. If 'if' statement conditional evaluates to false, loop breaks. The
same logic can be expressed by inverting the conditional and breaking
when new conditional evaluates to true. This allows the subsequent code
to be indented one level less, aiding readability. Reduced indentation
also allows for the code to be laid out more clearly and fixes two
checkpatch warnings.

Invert if statement conditional, break from for loop if new
conditional evaluates to true. Reduce indentation in subsequent code,
fix whitespace issues. Do not change program logic.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function uses multi-way decision for control flow. Final statement of
function is spin_unlock(). Code can be simplified by adding a goto label
labelling the call to spin_unlock() and jumping to label instead of
using multi-way decision. This allows the code to be indented one
level less which adds to the readability.

Add goto label. Remove multi-way decision by jumping to label. Reduce
indentation in subsequent code. Do not change program logic.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>