- 19 Feb, 2014 2 commits
-
-
Mika Westerberg authored
Intel Baytrail is based on Silvermont core so MSR_FSB_FREQ[2:0] == 0 means that the CPU reference clock runs at 83.3MHz. Add this missing frequency to the table. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Bin Gao <bin.gao@linux.intel.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1392810750-18660-2-git-send-email-mika.westerberg@linux.intel.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
If we cannot calibrate TSC via MSR based calibration try_msr_calibrate_tsc() stores zero to fast_calibrate and returns that to the caller. This value gets then propagated further to clockevents code resulting division by zero oops like the one below: divide error: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.13.0+ #47 task: ffff880075508000 ti: ffff880075506000 task.ti: ffff880075506000 RIP: 0010:[<ffffffff810aec14>] [<ffffffff810aec14>] clockevents_config.part.3+0x24/0xa0 RSP: 0000:ffff880075507e58 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff880079c0cd80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff880075507e70 R08: 0000000000000001 R09: 00000000000000be R10: 00000000000000bd R11: 0000000000000003 R12: 000000000000b008 R13: 0000000000000008 R14: 000000000000b010 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880079c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff880079fff000 CR3: 0000000001c0b000 CR4: 00000000001006f0 Stack: ffff880079c0cd80 000000000000b008 0000000000000008 ffff880075507e88 ffffffff810aecb0 ffff880079c0cd80 ffff880075507e98 ffffffff81030168 ffff880075507ed8 ffffffff81d1104f 00000000000000c3 0000000000000000 Call Trace: [<ffffffff810aecb0>] clockevents_config_and_register+0x20/0x30 [<ffffffff81030168>] setup_APIC_timer+0xc8/0xd0 [<ffffffff81d1104f>] setup_boot_APIC_clock+0x4cc/0x4d8 [<ffffffff81d0f5de>] native_smp_prepare_cpus+0x3dd/0x3f0 [<ffffffff81d02ee9>] kernel_init_freeable+0xc3/0x205 [<ffffffff8177c910>] ? rest_init+0x90/0x90 [<ffffffff8177c91e>] kernel_init+0xe/0x120 [<ffffffff8178deec>] ret_from_fork+0x7c/0xb0 [<ffffffff8177c910>] ? rest_init+0x90/0x90 Prevent this from happening by: 1) Modifying try_msr_calibrate_tsc() to return calibration value or zero if it fails. 2) Check this return value in native_calibrate_tsc() and in case of zero fallback to use normal non-MSR based calibration. [mw: Added subject and changelog] Reported-and-tested-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Bin Gao <bin.gao@linux.intel.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1392810750-18660-1-git-send-email-mika.westerberg@linux.intel.comSigned-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
- 18 Feb, 2014 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes for v3.14" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: fix use after free in jbd2_journal_start_reserved() ext4: don't leave i_crtime.tv_sec uninitialized ext4: fix online resize with a non-standard blocks per group setting ext4: fix online resize with very large inode tables ext4: don't try to modify s_flags if the the file system is read-only ext4: fix error paths in swap_inode_boot_loader() ext4: fix xfstest generic/299 block validity failures
-
Dan Carpenter authored
If start_this_handle() fails then it leads to a use after free of "handle". Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 17 Feb, 2014 32 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph fixes from Sage Weil: "We have some patches fixing up ACL support issues from Zheng and Guangliang and a mount option to enable/disable this support. (These fixes were somewhat delayed by the Chinese holiday.) There is also a small fix for cached readdir handling when directories are fragmented" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: fix __dcache_readdir() ceph: add acl, noacl options for cephfs mount ceph: make ceph_forget_all_cached_acls() static inline ceph: add missing init_acl() for mkdir() and atomic_open() ceph: fix ceph_set_acl() ceph: fix ceph_removexattr() ceph: remove xattr when null value is given to setxattr() ceph: properly handle XATTR_CREATE and XATTR_REPLACE
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French: "Three cifs fixes, the most important fixing the problem with passing bogus pointers with writev (CVE-2014-0069). Two additional cifs fixes are still in review (including the fix for an append problem which Al also discovered)" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix too big maxBuf size for SMB3 mounts cifs: ensure that uncached writes handle unmapped areas correctly [CIFS] Fix cifsacl mounts over smb2 to not call cifs
-
David Howells authored
When FS-Cache allocates an object, the following sequence of events can occur: -->fscache_alloc_object() -->cachefiles_alloc_object() [via cache->ops->alloc_object] <--[returns new object] -->fscache_attach_object() <--[failed] -->cachefiles_put_object() [via cache->ops->put_object] -->fscache_object_destroy() -->fscache_objlist_remove() -->rb_erase() to remove the object from fscache_object_list. resulting in a crash in the rbtree code. The problem is that the object is only added to fscache_object_list on the success path of fscache_attach_object() where it calls fscache_objlist_add(). So if fscache_attach_object() fails, the object won't have been added to the objlist rbtree. We do, however, unconditionally try to remove the object from the tree. Thanks to NeilBrown for finding this and suggesting this solution. Reported-by:
NeilBrown <neilb@suse.de> Signed-off-by:
David Howells <dhowells@redhat.com> Tested-by:
(a customer of) NeilBrown <neilb@suse.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Jones authored
This has been this way for years, and every time I stumble across it I lose my lunch. After coming across it for the nth time in the Coverity results, I had to overcome the bystander effect and do something about it. This ignores the 79 column limit in favor of making it look like C instead of gibberish. The correct thing to do here would be to lose some of the indentation by breaking this function up into several smaller ones. I might do that at some point if I have the stomach to look at this again. (Also some of those overlong ternary operations would likely be more readable as regular if's) Signed-off-by:
Dave Jones <davej@fedoraproject.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-bufLinus Torvalds authored
Pull dma-buf fix from Sumit Semwal: "Just some debugfs output updates. There's another patch related to dma-buf, but it'll get upstreamed via Greg KH's pull request" * tag 'dma-buf-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf: dma-buf: update debugfs output
-
git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32Linus Torvalds authored
Pull AVR32 fixes from Hans-Christian Egtvedt. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32: avr32: add generic vga.h to Kbuild avr32: add generic ioremap_wc() definition in io.h avr32: Makefile: add '-D__linux__' flag for gcc-4.4.7 use avr32: fix missing module.h causing build failure in mimc200/fram.c
-
Yan, Zheng authored
If directory is fragmented, readdir() read its dirfrags one by one. After reading all dirfrags, the corresponding dentries are sorted in (frag_t, off) order in the dcache. If dentries of a directory are all cached, __dcache_readdir() can use the cached dentries to satisfy readdir syscall. But when checking if a given dentry is after the position of readdir, __dcache_readdir() compares numerical value of frag_t directly. This is wrong, it should use ceph_frag_compare(). Signed-off-by:
Yan, Zheng <zheng.z.yan@intel.com>
-
Sage Weil authored
Make the 'acl' option dependent on having ACL support compiled in. Make the 'noacl' option work even without it so that one can always ask it to be off and not error out on mount when it is not supported. Signed-off-by:
Guangliang Zhao <lucienchao@gmail.com> Signed-off-by:
Sage Weil <sage@inktank.com>
-
Guangliang Zhao authored
Signed-off-by:
Guangliang Zhao <lucienchao@gmail.com> Reviewed-by:
Alex Elder <elder@linaro.org> Signed-off-by:
Sage Weil <sage@inktank.com>
-
Yan, Zheng authored
Signed-off-by:
Yan, Zheng <zheng.z.yan@intel.com>
-
Yan, Zheng authored
If acl is equivalent to file mode permission bits, ceph_set_acl() needs to remove any existing acl xattr. Use __ceph_setxattr() to handle both setting and removing acl xattr cases, it doesn't return -ENODATA when there is no acl xattr. Signed-off-by:
Yan, Zheng <zheng.z.yan@intel.com>
-
Yan, Zheng authored
Signed-off-by:
Yan, Zheng <zheng.z.yan@intel.com>
-
Yan, Zheng authored
For the setxattr request, introduce a new flag CEPH_XATTR_REMOVE to distinguish null value case from the zero-length value case. Signed-off-by:
Yan, Zheng <zheng.z.yan@intel.com>
-
Yan, Zheng authored
return -EEXIST if XATTR_CREATE is set and xattr alread exists. return -ENODATA if XATTR_REPLACE is set but xattr does not exist. Signed-off-by:
Yan, Zheng <zheng.z.yan@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Ben Herrenschmidt: "Here are some more powerpc fixes for 3.14 The main one is a nasty issue with the NUMA balancing support which requires a small generic change and the addition of a new accessor to set _PAGE_NUMA. Both have been reviewed and acked by Mel and Rik. The changelog should have plenty of details but basically, without this fix, we get random user segfaults and/or corruptions due to missing TLB/hash flushes. Aneesh series of 3 patches fixes it. We have some vDSO vs. perf fixes from Anton, some small EEH fixes from Gavin, a ppc32 regression vs the stack overflow detector, and a fix for the way we handle PCIe host bridge speed settings on pseries (which is needed for proper operations of AMD graphics cards on Power8)" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/eeh: Disable EEH on reboot powerpc/eeh: Cleanup on eeh_subsystem_enabled powerpc/powernv: Rework EEH reset powerpc: Use unstripped VDSO image for more accurate profiling data powerpc: Link VDSOs at 0x0 mm: Use ptep/pmdp_set_numa() for updating _PAGE_NUMA bit mm: Dirty accountable change only apply to non prot numa case powerpc/mm: Add new "set" flag argument to pte/pmd update function powerpc/pseries: Add Gen3 definitions for PCIE link speed powerpc/pseries: Fix regression on PCI link speed powerpc: Set the correct ksp_limit on ppc32 when switching to irq stack
-
Linus Torvalds authored
This is not a buffer overflow in the traditional sense: we don't overflow any *kernel* buffers, but we do mis-count the amount of data we copy back to user space for the SYSLOG_ACTION_READ_ALL case. In particular, if the user buffer is too small to hold everything, and *if* there is a continuation line at just the right place, we can end up giving the user more data than he asked for. The reason is that we first count up the number of bytes all the log records contains, then we walk the records again until we've skipped the records at the beginning that won't fit, and then we walk the rest of the records and copy them to the user space buffer. And in between that "skip the initial records that won't fit" and the "copy the records that *will* fit to user space", we reset the 'prev' variable that contained the record information for the last record not copied. That meant that when we started copying to user space, we now had a different character count than what we had originally calculated in the first record walk-through. The fix is to simply not clear the 'prev' flags value (in both cases where we had the same logic: syslog_print_all and kmsg_dump_get_buffer: the latter is used for pstore-like dumping) Reported-and-tested-by:
Debabrata Banerjee <dbanerje@akamai.com> Acked-by:
Kay Sievers <kay@vrfy.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Chen Gang authored
Need add generic "vga.h", or can not pass building for allmodconfig, the related error: CC [M] drivers/gpu/drm/drm_irq.o In file included from include/linux/vgaarb.h:34, from drivers/gpu/drm/drm_irq.c:42: include/video/vga.h:22:21: error: asm/vga.h: No such file or directory Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Acked-by:
Hans-Christian Egtvedt <hegtvedt@cisco.com>
-
Chen Gang authored
Need generic ioremap_wc(), or can not pass compiling with allmodconfig, the related error: CC [M] drivers/gpu/drm/drm_bufs.o drivers/gpu/drm/drm_bufs.c: In function 'drm_addmap_core': drivers/gpu/drm/drm_bufs.c:217: error: implicit declaration of function 'ioremap_wc' drivers/gpu/drm/drm_bufs.c:218: warning: assignment makes pointer from integer without a cast Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Acked-by:
Hans-Christian Egtvedt <hegtvedt@cisco.com>
-
Chen Gang authored
For avr32 cross compiler, do not define '__linux__' internally, so it will cause issue with allmodconfig. The related error: CC [M] fs/coda/psdev.o In file included from include/linux/coda.h:64, from fs/coda/psdev.c:45: include/uapi/linux/coda.h:221: error: expected specifier-qualifier-list before 'u_quad_t' The related toolchain version (which only download, not re-compile): [root@gchen linux-next]# /upstream/toolchain/download/avr32-gnu-toolchain-linux_x86/bin/avr32-gcc -v Using built-in specs. Target: avr32 Configured with: /data2/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/src/gcc/configure --target=avr32 --host=i686-pc-linux-gnu --build=x86_64-pc-linux-gnu --prefix=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-languages=c,c++ --disable-nls --disable-libssp --disable-libstdcxx-pch --with-dwarf2 --enable-version-specific-runtime-libs --disable-shared --enable-doc --with-mpfr-lib=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/lib --with-mpfr-include=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86/include --with-gmp=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --with-mpc=/home/toolsbuild/jenkins-knuth/workspace/avr32-gnu-toolchain/avr32-gnu-toolchain-linux_x86 --enable-__cxa_atexit --disable-shared --with-newlib --with-pkgversion=AVR_32_bit_GNU_Toolchain_3.4.2_435 --with-bugurl=http://www .atmel.com/avr Thread model: single gcc version 4.4.7 (AVR_32_bit_GNU_Toolchain_3.4.2_435) Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Acked-by:
Hans-Christian Egtvedt <hegtvedt@cisco.com> Cc: stable@vger.kernel.org
-
Paul Gortmaker authored
Causing this: In file included from arch/avr32/boards/mimc200/fram.c:13: include/linux/miscdevice.h:51: error: field 'list' has incomplete type include/linux/miscdevice.h:55: error: expected specifier-qualifier-list before 'mode_t' arch/avr32/boards/mimc200/fram.c:42: error: 'THIS_MODULE' undeclared here (not in a function) Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Acked-by:
Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: stable@vger.kernel.org
-
Theodore Ts'o authored
If the i_crtime field is not present in the inode, don't leave the field uninitialized. Fixes: ef7f3835 ("ext4: Add nanosecond timestamps") Reported-by:
Vegard Nossum <vegard.nossum@oracle.com> Tested-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
Gavin Shan authored
We possiblly detect EEH errors during reboot, particularly in kexec path, but it's impossible for device drivers and EEH core to handle or recover them properly. The patch registers one reboot notifier for EEH and disable EEH subsystem during reboot. That means the EEH errors is going to be cleared by hardware reset or second kernel during early stage of PCI probe. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Gavin Shan authored
The patch cleans up variable eeh_subsystem_enabled so that we needn't refer the variable directly from external. Instead, we will use function eeh_enabled() and eeh_set_enable() to operate the variable. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Gavin Shan authored
When doing reset in order to recover the affected PE, we issue hot reset on PE primary bus if it's not root bus. Otherwise, we issue hot or fundamental reset on root port or PHB accordingly. For the later case, we didn't cover the situation where PE only includes root port and it potentially causes kernel crash upon EEH error to the PE. The patch reworks the logic of EEH reset to improve the code readability and also avoid the kernel crash. Cc: stable@vger.kernel.org Reported-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Anton Blanchard authored
We are seeing a lot of hits in the VDSO that are not resolved by perf. A while(1) gettimeofday() loop shows the issue: 27.64% [vdso] [.] 0x000000000000060c 22.57% [vdso] [.] 0x0000000000000628 16.88% [vdso] [.] 0x0000000000000610 12.39% [vdso] [.] __kernel_gettimeofday 6.09% [vdso] [.] 0x00000000000005f8 3.58% test [.] 00000037.plt_call.gettimeofday@@GLIBC_2.18 2.94% [vdso] [.] __kernel_datapage_offset 2.90% test [.] main We are using a stripped VDSO image which means only symbols with relocation info can be resolved. There isn't a lot of point to stripping the VDSO, the debug info is only about 1kB: 4680 arch/powerpc/kernel/vdso64/vdso64.so 5815 arch/powerpc/kernel/vdso64/vdso64.so.dbg By using the unstripped image, we can resolve all the symbols in the VDSO and the perf profile data looks much better: 76.53% [vdso] [.] __do_get_tspec 12.20% [vdso] [.] __kernel_gettimeofday 5.05% [vdso] [.] __get_datapage 3.20% test [.] main 2.92% test [.] 00000037.plt_call.gettimeofday@@GLIBC_2.18 Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Anton Blanchard authored
perf is failing to resolve symbols in the VDSO. A while (1) gettimeofday() loop shows: 93.99% [vdso] [.] 0x00000000000005e0 3.12% test [.] 00000037.plt_call.gettimeofday@@GLIBC_2.18 2.81% test [.] main The reason for this is that we are linking our VDSO shared libraries at 1MB, which is a little weird. Even though this is uncommon, Alan points out that it is valid and we should probably fix perf userspace. Regardless, I can't see a reason why we are doing this. The code is all position independent and we never rely on the VDSO ending up at 1M (and we never place it there on 64bit tasks). Changing our link address to 0x0 fixes perf VDSO symbol resolution: 73.18% [vdso] [.] 0x000000000000060c 12.39% [vdso] [.] __kernel_gettimeofday 3.58% test [.] 00000037.plt_call.gettimeofday@@GLIBC_2.18 2.94% [vdso] [.] __kernel_datapage_offset 2.90% test [.] main We still have some local symbol resolution issues that will be fixed in a subsequent patch. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Aneesh Kumar K.V authored
Archs like ppc64 doesn't do tlb flush in set_pte/pmd functions when using a hash table MMU for various reasons (the flush is handled as part of the PTE modification when necessary). ppc64 thus doesn't implement flush_tlb_range for hash based MMUs. Additionally ppc64 require the tlb flushing to be batched within ptl locks. The reason to do that is to ensure that the hash page table is in sync with linux page table. We track the hpte index in linux pte and if we clear them without flushing hash and drop the ptl lock, we can have another cpu update the pte and can end up with duplicate entry in the hash table, which is fatal. We also want to keep set_pte_at simpler by not requiring them to do hash flush for performance reason. We do that by assuming that set_pte_at() is never *ever* called on a PTE that is already valid. This was the case until the NUMA code went in which broke that assumption. Fix that by introducing a new pair of helpers to set _PAGE_NUMA in a way similar to ptep/pmdp_set_wrprotect(), with a generic implementation using set_pte_at() and a powerpc specific one using the appropriate mechanism needed to keep the hash table in sync. Acked-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Aneesh Kumar K.V authored
So move it within the if loop Acked-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Aneesh Kumar K.V authored
pte_update() is a powerpc-ism used to change the bits of a PTE when the access permission is being restricted (a flush is potentially needed). It uses atomic operations on when needed and handles the hash synchronization on hash based processors. It is currently only used to clear PTE bits and so the current implementation doesn't provide a way to also set PTE bits. The new _PAGE_NUMA bit, when set, is actually restricting access so it must use that function too, so this change adds the ability for pte_update() to also set bits. We will use this later to set the _PAGE_NUMA bit. Acked-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Kleber Sacilotto de Souza authored
Rev3 of the PCI Express Base Specification defines a Supported Link Speeds Vector where the bit definitions within this field are: Bit 0 - 2.5 GT/s Bit 1 - 5.0 GT/s Bit 2 - 8.0 GT/s This vector definition is used by the platform firmware to export the maximum and current link speeds of the PCI bus via the "ibm,pcie-link-speed-stats" device-tree property. This patch updates pseries_root_bridge_prepare() to detect Gen3 speed buses (defined by 0x04). Signed-off-by:
Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Kleber Sacilotto de Souza authored
Commit 5091f0c9 (powerpc/pseries: Fix PCIE link speed endian issue) introduced a regression on the PCI link speed detection using the device-tree property. The ibm,pcie-link-speed-stats property is composed of two 32-bit integers, the first one being the maxinum link speed and the second the current link speed. The changes introduced by the aforementioned commit are considering just the first integer. Fix this issue by changing how the property is accessed, using the helper functions to properly access the array of values. The explicit byte swapping is not needed anymore here, since it's done by the helper functions. Signed-off-by:
Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Kevin Hao authored
Guenter Roeck has got the following call trace on a p2020 board: Kernel stack overflow in process eb3e5a00, r1=eb79df90 CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4 task: eb3e5a00 ti: c0616000 task.ti: ef440000 NIP: c003a420 LR: c003a410 CTR: c0017518 REGS: eb79dee0 TRAP: 0901 Not tainted (3.13.0-rc8-juniper-00146-g19eca00) MSR: 00029000 <CE,EE,ME> CR: 24008444 XER: 00000000 GPR00: c003a410 eb79df90 eb3e5a00 00000000 eb05d900 00000001 65d87646 00000000 GPR08: 00000000 020b8000 00000000 00000000 44008442 NIP [c003a420] __do_softirq+0x94/0x1ec LR [c003a410] __do_softirq+0x84/0x1ec Call Trace: [eb79df90] [c003a410] __do_softirq+0x84/0x1ec (unreliable) [eb79dfe0] [c003a970] irq_exit+0xbc/0xc8 [eb79dff0] [c000cc1c] call_do_irq+0x24/0x3c [ef441f20] [c00046a8] do_IRQ+0x8c/0xf8 [ef441f40] [c000e7f4] ret_from_except+0x0/0x18 --- Exception: 501 at 0xfcda524 LR = 0x10024900 Instruction dump: 7c781b78 3b40000a 3a73b040 543c0024 3a800000 3b3913a0 7ef5bb78 48201bf9 5463103a 7d3b182e 7e89b92e 7c008146 <3ba00000> 7e7e9b78 48000014 57fff87f Kernel panic - not syncing: kernel stack overflow CPU: 0 PID: 2838 Comm: ssh Not tainted 3.13.0-rc8-juniper-00146-g19eca00 #4 Call Trace: The reason is that we have used the wrong register to calculate the ksp_limit in commit cbc9565e (powerpc: Remove ksp_limit on ppc64). Just fix it. As suggested by Benjamin Herrenschmidt, also add the C prototype of the function in the comment in order to avoid such kind of errors in the future. Cc: stable@vger.kernel.org # 3.12 Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 16 Feb, 2014 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "We have a small collection of fixes in my for-linus branch. The big thing that stands out is a revert of a new ioctl. Users haven't shipped yet in btrfs-progs, and Dave Sterba found a better way to export the information" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: use right clone root offset for compressed extents btrfs: fix null pointer deference at btrfs_sysfs_add_one+0x105 Btrfs: unset DCACHE_DISCONNECTED when mounting default subvol Btrfs: fix max_inline mount option Btrfs: fix a lockdep warning when cleaning up aborted transaction Revert "btrfs: add ioctl to export size of global metadata reservation"
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: "Fix booting on PPC boards. Changes to of_match_node matching caused the serial port on some PPC boards to stop working. Reverted the change and reimplement to split matching between new style compatible only matching and fallback to old matching algorithm" * tag 'dt-fixes-for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: search the best compatible match first in __of_match_node() Revert "OF: base: match each node compatible against all given matches first"
-
Theodore Ts'o authored
The set_flexbg_block_bitmap() function assumed that the number of blocks in a blockgroup was sb->blocksize * 8, which is normally true, but not always! Use EXT4_BLOCKS_PER_GROUP(sb) instead, to fix block bitmap corruption after: mke2fs -t ext4 -g 3072 -i 4096 /dev/vdd 1G mount -t ext4 /dev/vdd /vdd resize2fs /dev/vdd 8G Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Reported-by:
Jon Bernard <jbernard@tuxion.com> Cc: stable@vger.kernel.org
-