- 02 Feb, 2016 40 commits
-
-
Tejun Heo authored
commit 8d91f8b1 upstream. @console_may_schedule tracks whether console_sem was acquired through lock or trylock. If the former, we're inside a sleepable context and console_conditional_schedule() performs cond_resched(). This allows console drivers which use console_lock for synchronization to yield while performing time-consuming operations such as scrolling. However, the actual console outputting is performed while holding irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule before starting outputting lines. Also, only a few drivers call console_conditional_schedule() to begin with. This means that when a lot of lines need to be output by console_unlock(), for example on a console registration, the task doing console_unlock() may not yield for a long time on a non-preemptible kernel. If this happens with a slow console devices, for example a serial console, the outputting task may occupy the cpu for a very long time. Long enough to trigger softlockup and/or RCU stall warnings, which in turn pile more messages, sometimes enough to trigger the next cycle of warnings incapacitating the system. Fix it by making console_unlock() insert cond_resched() between lines if @console_may_schedule. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Calvin Owens <calvinowens@fb.com> Acked-by:
Jan Kara <jack@suse.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Kyle McMartin <kyle@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Vitaly Kuznetsov authored
commit 7625b3a0 upstream. Commit 08d78658 ("panic: release stale console lock to always get the logbuf printed out") introduced an unwanted bad unlock balance report when panic() is called directly and not from OOPS (e.g. from out_of_memory()). The difference is that in case of OOPS we disable locks debug in oops_enter() and on direct panic call nobody does that. Fixes: 08d78658 ("panic: release stale console lock to always get the logbuf printed out") Reported-by:
kernel test robot <ying.huang@linux.intel.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Baoquan He <bhe@redhat.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Jan Kara <jack@suse.cz> Cc: Petr Mladek <pmladek@suse.cz> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 08d78658 upstream. In some cases we may end up killing the CPU holding the console lock while still having valuable data in logbuf. E.g. I'm observing the following: - A crash is happening on one CPU and console_unlock() is being called on some other. - console_unlock() tries to print out the buffer before releasing the lock and on slow console it takes time. - in the meanwhile crashing CPU does lots of printk()-s with valuable data (which go to the logbuf) and sends IPIs to all other CPUs. - console_unlock() finishes printing previous chunk and enables interrupts before trying to print out the rest, the CPU catches the IPI and never releases console lock. This is not the only possible case: in VT/fb subsystems we have many other console_lock()/console_unlock() users. Non-masked interrupts (or receiving NMI in case of extreme slowness) will have the same result. Getting the whole console buffer printed out on crash should be top priority. [akpm@linux-foundation.org: tweak comment text] Signed-off-by:
-
Martijn Coenen authored
commit 6611d8d7 upstream. A spare array holding mem cgroup threshold events is kept around to make sure we can always safely deregister an event and have an array to store the new set of events in. In the scenario where we're going from 1 to 0 registered events, the pointer to the primary array containing 1 event is copied to the spare slot, and then the spare slot is freed because no events are left. However, it is freed before calling synchronize_rcu(), which means readers may still be accessing threshold->primary after it is freed. Fixed by only freeing after synchronize_rcu(). Signed-off-by:
Martijn Coenen <maco@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by:
-
Naoya Horiguchi authored
commit d96b339f upstream. I saw the following BUG_ON triggered in a testcase where a process calls madvise(MADV_SOFT_OFFLINE) on thps, along with a background process that calls migratepages command repeatedly (doing ping-pong among different NUMA nodes) for the first process: Soft offlining page 0x60000 at 0x700000600000 __get_any_page: 0x60000 free buddy page page:ffffea0001800000 count:0 mapcount:-127 mapping: (null) index:0x1 flags: 0x1fffc0000000000() page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0) ------------[ cut here ]------------ kernel BUG at /src/linux-dev/include/linux/mm.h:342! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: cfg80211 rfkill crc32c_intel serio_raw virtio_balloon i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi CPU: 3 PID: 3035 Comm: test_alloc_gene Tainted: G O 4.4.0-rc8-v4.4-rc8-160107-1501-00000-rc8+ #74 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88007c63d5c0 ti: ffff88007c210000 task.ti: ffff88007c210000 RIP: 0010:[<ffffffff8118998c>] [<ffffffff8118998c>] put_page+0x5c/0x60 RSP: 0018:ffff88007c213e00 EFLAGS: 00010246 Call Trace: put_hwpoison_page+0x4e/0x80 soft_offline_page+0x501/0x520 SyS_madvise+0x6bc/0x6f0 entry_SYSCALL_64_fastpath+0x12/0x6a Code: 8b fc ff ff 5b 5d c3 48 89 df e8 b0 fa ff ff 48 89 df 31 f6 e8 c6 7d ff ff 5b 5d c3 48 c7 c6 08 54 a2 81 48 89 df e8 a4 c5 01 00 <0f> 0b 66 90 66 66 66 66 90 55 48 89 e5 41 55 41 54 53 48 8b 47 RIP [<ffffffff8118998c>] put_page+0x5c/0x60 RSP <ffff88007c213e00> The root cause resides in get_any_page() which retries to get a refcount of the page to be soft-offlined. This function calls put_hwpoison_page(), expecting that the target page is putback to LRU list. But it can be also freed to buddy. So the second check need to care about such case. Fixes: af8fae7c ("mm/memory-failure.c: clean up soft_offline_page()") Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Takashi Iwai authored
commit b5a663aa upstream. A slave timer instance might be still accessible in a racy way while operating the master instance as it lacks of locking. Since the master operation is mostly protected with timer->lock, we should cope with it while changing the slave instance, too. Also, some linked lists (active_list and ack_list) of slave instances aren't unlinked immediately at stopping or closing, and this may lead to unexpected accesses. This patch tries to address these issues. It adds spin lock of timer->lock (either from master or slave, which is equivalent) in a few places. For avoiding a deadlock, we ensure that the global slave_active_lock is always locked at first before each timer lock. Also, ack and active_list of slave instances are properly unlinked at snd_timer_stop() and snd_timer_close(). Last but not least, remove the superfluous call of _snd_timer_stop() at removing slave links. This is a noop, and calling it may confuse readers wrt locking. Further cleanup will follow in a later patch. Actually we've got reports of use-after-free by syzkaller fuzzer, and this hopefully fixes these issues. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
xuejiufei authored
commit bef5502d upstream. We have found that migration source will trigger a BUG that the refcount of mle is already zero before put when the target is down during migration. The situation is as follows: dlm_migrate_lockres dlm_add_migration_mle dlm_mark_lockres_migrating dlm_get_mle_inuse <<<<<< Now the refcount of the mle is 2. dlm_send_one_lockres and wait for the target to become the new master. <<<<<< o2hb detect the target down and clean the migration mle. Now the refcount is 1. dlm_migrate_lockres woken, and put the mle twice when found the target goes down which trigger the BUG with the following message: "ERROR: bad mle: ". Signed-off-by:
Jiufei Xue <xuejiufei@huawei.com> Reviewed-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Sergey Senozhatsky authored
commit 72214a24 upstream. In Python3+ print is a function so the old syntax is not correct anymore: $ ./scripts/bloat-o-meter vmlinux.o vmlinux.o.old File "./scripts/bloat-o-meter", line 61 print "add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \ ^ SyntaxError: invalid syntax Fix by calling print as a function. Tested on python 2.7.11, 3.5.1 Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
Laura Abbott authored
commit ea535e41 upstream. In include/asm-generic/sections.h: /* * Usage guidelines: * _text, _data: architecture specific, don't use them in * arch-independent code * [_stext, _etext]: contains .text.* sections, may also contain * .rodata.* * and/or .init.* sections _text is not guaranteed across architectures. Architectures such as ARM may reuse parts which are not actually text and erroneously trigger a bug. Switch to using _stext which is guaranteed to contain text sections. Came out of https://lkml.kernel.org/g/<567B1176.4000106@redhat.com> Signed-off-by:
Laura Abbott <labbott@fedoraproject.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Sudip Mukherjee authored
commit 601f1db6 upstream. The build of m32104ut_defconfig for m32r arch was failing for long long time with the error: ERROR: "memory_start" [fs/udf/udf.ko] undefined! ERROR: "memory_end" [fs/udf/udf.ko] undefined! ERROR: "memory_end" [drivers/scsi/sg.ko] undefined! ERROR: "memory_start" [drivers/scsi/sg.ko] undefined! ERROR: "memory_end" [drivers/i2c/i2c-dev.ko] undefined! ERROR: "memory_start" [drivers/i2c/i2c-dev.ko] undefined! As done in other architectures export the symbols to fix the error. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Vasily Averin authored
commit 01b9b0b2 upstream. In some cases tmp_bug can be not filled in cifs_filldir and stay uninitialized, therefore its printk with "%s" modifier can leak content of kernelspace memory. If old content of this buffer does not contain '\0' access bejond end of allocated object can crash the host. Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
Steve French <sfrench@localhost.localdomain> Signed-off-by:
-
Rabin Vincent authored
commit 820962dc upstream. cifs_call_async() queues the MID to the pending list and calls smb_send_rqst(). If smb_send_rqst() performs a partial send, it sets the tcpStatus to CifsNeedReconnect and returns an error code to cifs_call_async(). In this case, cifs_call_async() removes the MID from the list and returns to the caller. However, cifs_call_async() releases the server mutex _before_ removing the MID. This means that a cifs_reconnect() can race with this function and manage to remove the MID from the list and delete the entry before cifs_call_async() calls cifs_delete_mid(). This leads to various crashes due to the use after free in cifs_delete_mid(). Task1 Task2 cifs_call_async(): - rc = -EAGAIN - mutex_unlock(srv_mutex) cifs_reconnect(): - mutex_lock(srv_mutex) - mutex_unlock(srv_mutex) - list_delete(mid) - mid->callback() cifs_writev_callback(): - mutex_lock(srv_mutex) - delete(mid) - mutex_unlock(srv_mutex) - cifs_delete_mid(mid) <---- use after free Fix this by removing the MID in cifs_call_async() before releasing the srv_mutex. Also hold the srv_mutex in cifs_reconnect() until the MIDs are moved out of the pending list. Signed-off-by:
Rabin Vincent <rabin.vincent@axis.com> Acked-by:
Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by:
-
Jamie Bainbridge authored
commit ec7147a9 upstream. Under some conditions, CIFS can repeatedly call the cifs_dbg() logging wrapper. If done rapidly enough, the console framebuffer can softlockup or "rcu_sched self-detected stall". Apply the built-in log ratelimiters to prevent such hangs. Signed-off-by:
Jamie Bainbridge <jamie.bainbridge@gmail.com> Signed-off-by:
Steve French <smfrench@gmail.com> [ kamal: backport to 3.13-stable: context ] Signed-off-by:
-
Dmitry V. Levin authored
commit 525fd5a9 upstream. The value returned by sys_personality has type "long int". It is saved to a variable of type "int", which is not a problem yet because the type of task_struct->pesonality is "unsigned int". The problem is the sign extension from "int" to "long int" that happens on return from sys_sparc64_personality. For example, a userspace call personality((unsigned) -EINVAL) will result to any subsequent personality call, including absolutely harmless read-only personality(0xffffffff) call, failing with errno set to EINVAL. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Takashi Iwai authored
commit af368027 upstream. ALSA timer ioctls have an open race and this may lead to a use-after-free of timer instance object. A simplistic fix is to make each ioctl exclusive. We have already tread_sem for controlling the tread, and extend this as a global mutex to be applied to each ioctl. The downside is, of course, the worse concurrency. But these ioctls aren't to be parallel accessible, in anyway, so it should be fine to serialize there. Reported-by:
-
Linus Walleij authored
commit 0bcb7efd upstream. commit 4956e109 ("ARM: 6244/1: mmci: add variant data and default MCICLOCK support") added variant data for ARM, U300 and Ux500 variants. The Nomadik NHK8815/8820 variant was erroneously labeled as a U300 variant, and when the proper Nomadik variant was later introduced in commit 34fd4213 ("ARM: 7378/1: mmci: add support for the Nomadik MMCI variant") this was not fixes. Let's say this fixes the latter commit as there was no proper Nomadik support until then. Fixes: 34fd4213 ("ARM: 7378/1: mmci: add support for the Nomadik...") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Mans Rullgard authored
commit 2895b2ca upstream. Cyclic transfer callbacks rely on block completion interrupts which were disabled in commit ff7b05f2 ("dmaengine/dw_dmac: Don't handle block interrupts"). This re-enables block interrupts so the cyclic callbacks can work. Other transfer types are not affected as they set the INT_EN bit only on the last block. Fixes: ff7b05f2 ("dmaengine/dw_dmac: Don't handle block interrupts") Signed-off-by:
Mans Rullgard <mans@mansr.com> Reviewed-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Mans Rullgard authored
commit df3bb8a0 upstream. Commit 61e183f8 ("dmaengine/dw_dmac: Reconfigure interrupt and chan_cfg register on resume") moved some channel initialisation to a new function which must be called before starting a transfer. This updates dw_dma_cyclic_start() to use dwc_dostart() like the other modes, thus ensuring dwc_initialize() gets called and removing some code duplication. Fixes: 61e183f8 ("dmaengine/dw_dmac: Reconfigure interrupt and chan_cfg register on resume") Signed-off-by:
-
Takashi Iwai authored
commit ee8413b0 upstream. ALSA timer instance object has a couple of linked lists and they are unlinked unconditionally at snd_timer_stop(). Meanwhile snd_timer_interrupt() unlinks it, but it calls list_del() which leaves the element list itself unchanged. This ends up with unlinking twice, and it was caught by syzkaller fuzzer. The fix is to use list_del_init() variant properly there, too. Reported-by:
-
Ulrich Weigand authored
commit a61674bd upstream. GCC 6 will include changes to generated code with -mcmodel=large, which is used to build kernel modules on powerpc64le. This was necessary because the large model is supposed to allow arbitrary sizes and locations of the code and data sections, but the ELFv2 global entry point prolog still made the unconditional assumption that the TOC associated with any particular function can be found within 2 GB of the function entry point: func: addis r2,r12,(.TOC.-func)@ha addi r2,r2,(.TOC.-func)@l .localentry func, .-func To remove this assumption, GCC will now generate instead this global entry point prolog sequence when using -mcmodel=large: .quad .TOC.-func func: .reloc ., R_PPC64_ENTRY ld r2, -8(r12) add r2, r2, r12 .localentry func, .-func The new .reloc triggers an optimization in the linker that will replace this new prolog with the original code (see above) if the linker determines that the distance between .TOC. and func is in range after all. Since this new relocation is now present in module object files, the kernel module loader is required to handle them too. This patch adds support for the new relocation and implements the same optimization done by the GNU linker. Signed-off-by:
Ulrich Weigand <ulrich.weigand@de.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [ kamal: backport to 3.13-stable: context ] Signed-off-by:
-
Ulrich Weigand authored
commit 2e50c4be upstream. If a text section starts out with a data blob before the first function start label, disassembly parsing doing in recordmcount.pl gets confused on powerpc, leading to creation of corrupted module objects. This was not a problem so far since the compiler would never create such text sections. However, this has changed with a recent change in GCC 6 to support distances of > 2GB between a function and its assoicated TOC in the ELFv2 ABI, exposing this problem. There is already code in recordmcount.pl to handle such data blobs on the sparc64 platform. This patch uses the same method to handle those on powerpc as well. Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Helge Deller authored
commit e60fc5aa upstream. On a 64bit kernel build the compiler aligns the _sifields union in the struct siginfo_t on a 64bit address. The __ARCH_SI_PREAMBLE_SIZE define compensates for this alignment and thus fixes the wait testcase of the strace package. The symptoms of a wrong __ARCH_SI_PREAMBLE_SIZE value is that _sigchld.si_stime variable is missed to be copied and thus after a copy_siginfo() will have uninitialized values. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Minchan Kim authored
commit 21ea9fb6 upstream. In balloon_page_dequeue, pages_lock should cover the loop (ie, list_for_each_entry_safe). Otherwise, the cursor page could be isolated by compaction and then list_del by isolation could poison the page->lru.{prev,next} so the loop finally could access wrong address like this. This patch fixes the bug. general protection fault: 0000 [#1] SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 2 PID: 82 Comm: vballoon Not tainted 4.4.0-rc5-mm1-access_bit+ #1906 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8800a7ff0000 ti: ffff8800a7fec000 task.ti: ffff8800a7fec000 RIP: 0010:[<ffffffff8115e754>] [<ffffffff8115e754>] balloon_page_dequeue+0x54/0x130 RSP: 0018:ffff8800a7fefdc0 EFLAGS: 00010246 RAX: ffff88013fff9a70 RBX: ffffea000056fe00 RCX: 0000000000002b7d RDX: ffff88013fff9a70 RSI: ffffea000056fe00 RDI: ffff88013fff9a68 RBP: ffff8800a7fefde8 R08: ffffea000056fda0 R09: 0000000000000000 R10: ffff8800a7fefd90 R11: 0000000000000001 R12: dead0000000000e0 R13: ffffea000056fe20 R14: ffff880138809070 R15: ffff880138809060 FS: 0000000000000000(0000) GS:ffff88013fc40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f229c10e000 CR3: 00000000b8b53000 CR4: 00000000000006a0 Stack: 0000000000000100 ffff880138809088 ffff880138809000 ffff880138809060 0000000000000046 ffff8800a7fefe28 ffffffff812c86d3 ffff880138809020 ffff880138809000 fffffffffff91900 0000000000000100 ffff880138809060 Call Trace: [<ffffffff812c86d3>] leak_balloon+0x93/0x1a0 [<ffffffff812c8bc7>] balloon+0x217/0x2a0 [<ffffffff8143739e>] ? __schedule+0x31e/0x8b0 [<ffffffff81078160>] ? abort_exclusive_wait+0xb0/0xb0 [<ffffffff812c89b0>] ? update_balloon_stats+0xf0/0xf0 [<ffffffff8105b6e9>] kthread+0xc9/0xe0 [<ffffffff8105b620>] ? kthread_park+0x60/0x60 [<ffffffff8143b4af>] ret_from_fork+0x3f/0x70 [<ffffffff8105b620>] ? kthread_park+0x60/0x60 Code: 8d 60 e0 0f 84 af 00 00 00 48 8b 43 20 a8 01 75 3b 48 89 d8 f0 0f ba 28 00 72 10 48 8b 03 f6 c4 08 75 2f 48 89 df e8 8c 83 f9 ff <49> 8b 44 24 20 4d 8d 6c 24 20 48 83 e8 20 4d 39 f5 74 7a 4c 89 RIP [<ffffffff8115e754>] balloon_page_dequeue+0x54/0x130 RSP <ffff8800a7fefdc0> ---[ end trace 43cf28060d708d5f ]--- Kernel panic - not syncing: Fatal exception Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Signed-off-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Rafael Aquini <aquini@redhat.com> Signed-off-by:
-
Minchan Kim authored
commit f68b992b upstream. During my compaction-related stuff, I encountered a bug with ballooning. With repeated inflating and deflating cycle, guest memory( ie, cat /proc/meminfo | grep MemTotal) is decreased and couldn't be recovered. The reason is balloon_lock doesn't cover release_pages_balloon so struct virtio_balloon fields could be overwritten by race of fill_balloon(e,g, vb->*pfns could be critical). This patch fixes it in my test. Signed-off-by:
-
Takashi Iwai authored
commit 3567eb6a upstream. ALSA sequencer code has an open race between the timer setup ioctl and the close of the client. This was triggered by syzkaller fuzzer, and a use-after-free was caught there as a result. This patch papers over it by adding a proper queue->timer_mutex lock around the timer-related calls in the relevant code path. Reported-by:
-
Takashi Iwai authored
commit 030e2c78 upstream. snd_seq_ioctl_remove_events() calls snd_seq_fifo_clear() unconditionally even if there is no FIFO assigned, and this leads to an Oops due to NULL dereference. The fix is just to add a proper NULL check. Reported-by:
-
Mario Kleiner authored
commit 2f0c0b2d upstream. Without the reboot=pci method, the iMac 10,1 simply hangs after printing "Restarting system" at the point when it should reboot. This fixes it. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1450466646-26663-1-git-send-email-mario.kleiner.de@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Benjamin Tissoires authored
commit 6544a1df upstream. When using a protocol v2 or v3 hardware, elantech uses the function elantech_report_semi_mt_data() to report data. This devices are rather creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid touch is reported. Anyway, userspace (libinput) is now confused by these (0,0) touches, and detect them as palm, and rejects them. Commit 3c0213d1 ("Input: elantech - fix semi-mt protocol for v3 HW") was sufficient enough for xf86-input-synaptics and libinput before it has palm rejection. Now we need to actually tell libinput that this device is a semi-mt one and it should not rely on the actual values of the 2 touches. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Roman Volkov authored
commit f9eccf24 upstream. The vt8500 clocksource driver declares itself as capable to handle the minimum delay of 4 cycles by passing the value into clockevents_config_and_register(). The vt8500_timer_set_next_event() requires the passed cycles value to be at least 16. The impact is that userspace hangs in nanosleep() calls with small delay intervals. This problem is reproducible in Linux 4.2 starting from: c6eb3f70 ('hrtimer: Get rid of hrtimer softirq') From Russell King, more detailed explanation: "It's a speciality of the StrongARM/PXA hardware. It takes a certain number of OSCR cycles for the value written to hit the compare registers. So, if a very small delta is written (eg, the compare register is written with a value of OSCR + 1), the OSCR will have incremented past this value before it hits the underlying hardware. The result is, that you end up waiting a very long time for the OSCR to wrap before the event fires. So, we introduce a check in set_next_event() to detect this and return -ETIME if the calculated delta is too small, which causes the generic clockevents code to retry after adding the min_delta specified in clockevents_config_and_register() to the current time value. min_delta must be sufficient that we don't re-trip the -ETIME check - if we do, we will return -ETIME, forward the next event time, try to set it, return -ETIME again, and basically lock the system up. So, min_delta must be larger than the check inside set_next_event(). A factor of two was chosen to ensure that this situation would never occur. The PXA code worked on PXA systems for years, and I'd suggest no one changes this mechanism without access to a wide range of PXA systems, otherwise they're risking breakage." Cc: Russell King <linux@arm.linux.org.uk> Acked-by:
Alexey Charkov <alchark@gmail.com> Signed-off-by:
Roman Volkov <rvolkov@v1ros.org> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Dave Chinner authored
commit b79f4a1c upstream. When we do inode readahead in log recovery, we do can do the readahead before we've replayed the icreate transaction that stamps the buffer with inode cores. The inode readahead verifier catches this and marks the buffer as !done to indicate that it doesn't yet contain valid inodes. In adding buffer error notification (i.e. setting b_error = -EIO at the same time as as we clear the done flag) to such a readahead verifier failure, we can then get subsequent inode recovery failing with this error: XFS (dm-0): metadata I/O error: block 0xa00060 ("xlog_recover_do..(read#2)") error 5 numblks 32 This occurs when readahead completion races with icreate item replay such as: inode readahead find buffer lock buffer submit RA io .... icreate recovery xfs_trans_get_buffer find buffer lock buffer <blocks on RA completion> ..... <ra completion> fails verifier clear XBF_DONE set bp->b_error = -EIO release and unlock buffer <icreate gains lock> icreate initialises buffer marks buffer as done adds buffer to delayed write queue releases buffer At this point, we have an initialised inode buffer that is up to date but has an -EIO state registered against it. When we finally get to recovering an inode in that buffer: inode item recovery xfs_trans_read_buffer find buffer lock buffer sees XBF_DONE is set, returns buffer sees bp->b_error is set fail log recovery! Essentially, we need xfs_trans_get_buf_map() to clear the error status of the buffer when doing a lookup. This function returns uninitialised buffers, so the buffer returned can not be in an error state and none of the code that uses this function expects b_error to be set on return. Indeed, there is an ASSERT(!bp->b_error); in the transaction case in xfs_trans_get_buf_map() that would have caught this if log recovery used transactions.... This patch firstly changes the inode readahead failure to set -EIO on the buffer, and secondly changes xfs_buf_get_map() to never return a buffer with an error state set so this first change doesn't cause unexpected log recovery failures. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Ard Biesheuvel authored
commit bcb7825a upstream. The normalization pass in the sorting routine of the relative exception table serves two purposes: - it ensures that the address fields of the exception table entries are fully ordered, so that no ambiguities arise between entries with identical instruction offsets (i.e., when two instructions that are exactly 8 bytes apart each have an exception table entry associated with them) - it ensures that the offsets of both the instruction and the fixup fields of each entry are relative to their final location after sorting. Commit eb608fb3 ("s390/exceptions: switch to relative exception table entries") ported the relative exception table format from x86, but modified the sorting routine to only normalize the instruction offset field and not the fixup offset field. The result is that the fixup offset of each entry will be relative to the original location of the entry before sorting, likely leading to crashes when those entries are dereferenced. Fixes: eb608fb3 ("s390/exceptions: switch to relative exception table entries") Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
H.J. Lu authored
commit 8c31902c upstream. When decompressing kernel image during x86 bootup, malloc memory for ELF program headers may run out of heap space, which leads to system halt. This patch doubles BOOT_HEAP_SIZE to 64KB. Tested with 32-bit kernel which failed to boot without this patch. Signed-off-by:
H.J. Lu <hjl.tools@gmail.com> Acked-by:
H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Ben Skeggs authored
commit 0a882cad upstream. fdo#93634 Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> [ kamal: backport to 3.13-stable: context ] Signed-off-by:
-
Vegard Nossum authored
commit 0754fb29 upstream. I was seeing some really weird behaviour where piping UML's output somewhere would cause output to get duplicated: $ ./vmlinux | head -n 40 Checking that ptrace can change system call numbers...Core dump limits : soft - 0 hard - NONE OK Checking syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Checking advanced syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Core dump limits : soft - 0 hard - NONE This is because these tests do a fork() which duplicates the non-empty stdout buffer, then glibc flushes the duplicated buffer as each child exits. A simple workaround is to flush before forking. Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Vegard Nossum authored
commit 9f2dfda2 upstream. An inverted return value check in hostfs_mknod() caused the function to return success after handling it as an error (and cleaning up). It resulted in the following segfault when trying to bind() a named unix socket: Pid: 198, comm: a.out Not tainted 4.4.0-rc4 RIP: 0033:[<0000000061077df6>] RSP: 00000000daae5d60 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 000000006092a460 RCX: 00000000dfc54208 RDX: 0000000061073ef1 RSI: 0000000000000070 RDI: 00000000e027d600 RBP: 00000000daae5de0 R08: 00000000da980ac0 R09: 0000000000000000 R10: 0000000000000003 R11: 00007fb1ae08f72a R12: 0000000000000000 R13: 000000006092a460 R14: 00000000daaa97c0 R15: 00000000daaa9a88 Kernel panic - not syncing: Kernel mode fault at addr 0x40, ip 0x61077df6 CPU: 0 PID: 198 Comm: a.out Not tainted 4.4.0-rc4 #1 Stack: e027d620 dfc54208 0000006f da981398 61bee000 0000c1ed daae5de0 0000006e e027d620 dfcd4208 00000005 6092a460 Call Trace: [<60dedc67>] SyS_bind+0xf7/0x110 [<600587be>] handle_syscall+0x7e/0x80 [<60066ad7>] userspace+0x3e7/0x4e0 [<6006321f>] ? save_registers+0x1f/0x40 [<6006c88e>] ? arch_prctl+0x1be/0x1f0 [<60054985>] fork_handler+0x85/0x90 Let's also get rid of the "cosmic ray protection" while we're at it. Fixes: e9193059 "hostfs: fix races in dentry_name() and inode_name()" Signed-off-by:
-
Mikulas Patocka authored
commit 385277bf upstream. When there is an error copying a chunk dm-snapshot can incorrectly hold associated bios indefinitely, resulting in hung IO. The function copy_callback sets pe->error if there was error copying the chunk, and then calls complete_exception. complete_exception calls pending_complete on error, otherwise it calls commit_exception with commit_callback (and commit_callback calls complete_exception). The persistent exception store (dm-snap-persistent.c) assumes that calls to prepare_exception and commit_exception are paired. persistent_prepare_exception increases ps->pending_count and persistent_commit_exception decreases it. If there is a copy error, persistent_prepare_exception is called but persistent_commit_exception is not. This results in the variable ps->pending_count never returning to zero and that causes some pending exceptions (and their associated bios) to be held forever. Fix this by unconditionally calling commit_exception regardless of whether the copy was successful. A new "valid" parameter is added to commit_exception -- when the copy fails this parameter is set to zero so that the chunk that failed to copy (and all following chunks) is not recorded in the snapshot store. Also, remove commit_callback now that it is merely a wrapper around pending_complete. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Vinod Koul authored
commit a1068045 upstream. The detection of direction for compress was only taking into account codec capabilities and not CPU ones. Fix this by checking the CPU side capabilities as well Tested-by:
Ashish Panwar <ashish.panwar@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Jeff Layton authored
commit 7f3697e2 upstream. Dmitry reported that he was able to reproduce the WARN_ON_ONCE that fires in locks_free_lock_context when the flc_posix list isn't empty. The problem turns out to be that we're basically rebuilding the file_lock from scratch in fcntl_setlk when we discover that the setlk has raced with a close. If the l_whence field is SEEK_CUR or SEEK_END, then we may end up with fl_start and fl_end values that differ from when the lock was initially set, if the file position or length of the file has changed in the interim. Fix this by just reusing the same lock request structure, and simply override fl_type value with F_UNLCK as appropriate. That ensures that we really are unlocking the lock that was initially set. While we're there, make sure that we do pop a WARN_ON_ONCE if the removal ever fails. Also return -EBADF in this event, since that's what we would have returned if the close had happened earlier. Cc: Alexander Viro <viro@zeniv.linux.org.uk> Fixes: c293621b (stale POSIX lock handling) Reported-by:
Jeff Layton <jeff.layton@primarydata.com> Acked-by:
"J. Bruce Fields" <bfields@fieldses.org> Signed-off-by:
-
Oren Givon authored
commit 006bda75 upstream. Update and fix some 7265 PCI IDs entries. Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Grygorii Strashko authored
commit 8ff0ef99 upstream. On -RT and if kernel is booting with "threadirqs" cmd line parameter, PCIe/PCI (MSI) IRQ cascade handlers (like dra7xx_pcie_msi_irq_handler()) will be forced threaded and, as result, will generate warnings like this: WARNING: CPU: 1 PID: 82 at kernel/irq/handle.c:150 handle_irq_event_percpu+0x14c/0x174() irq 460 handler irq_default_primary_handler+0x0/0x14 enabled interrupts Backtrace: (warn_slowpath_common) from (warn_slowpath_fmt+0x38/0x40) (warn_slowpath_fmt) from (handle_irq_event_percpu+0x14c/0x174) (handle_irq_event_percpu) from (handle_irq_event+0x84/0xb8) (handle_irq_event) from (handle_simple_irq+0x90/0x118) (handle_simple_irq) from (generic_handle_irq+0x30/0x44) (generic_handle_irq) from (dra7xx_pcie_msi_irq_handler+0x7c/0x8c) (dra7xx_pcie_msi_irq_handler) from (irq_forced_thread_fn+0x28/0x5c) (irq_forced_thread_fn) from (irq_thread+0x128/0x204) This happens because all of them invoke generic_handle_irq() from the requested handler. generic_handle_irq() grabs raw_locks and thus needs to run in raw-IRQ context. This issue was originally reproduced on TI dra7-evem, but, as was identified during discussion [1], other hosts can also suffer from this issue. Fix all them at once by marking PCIe/PCI (MSI) IRQ cascade handlers IRQF_NO_THREAD explicitly. [1] http://lkml.kernel.org/r/1448027966-21610-1-git-send-email-grygorii.strashko@ti.com [bhelgaas: add stable tag, fix typos] Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> (for imx6) CC: Kishon Vijay Abraham I <kishon@ti.com> CC: Jingoo Han <jingoohan1@gmail.com> CC: Kukjin Kim <kgene@kernel.org> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> CC: Richard Zhu <Richard.Zhu@freescale.com> CC: Thierry Reding <thierry.reding@gmail.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Alexandre Courbot <gnurou@gmail.com> CC: Simon Horman <horms@verge.net.au> CC: Pratyush Anand <pratyush.anand@gmail.com> CC: Michal Simek <michal.simek@xilinx.com> CC: "Sören Brinkmann" <soren.brinkmann@xilinx.com> CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ kamal: backport to 3.13-stable: applies only to pci-exynos and pci-tegra ] Signed-off-by:
-
