- 21 Jul, 2017 40 commits
-
-
Lauro Ramos Venancio authored
commit f32d782e upstream. The group mask is always used in intersection with the group CPUs. So, when building the group mask, we don't have to care about CPUs that are not part of the group. Signed-off-by:
Lauro Ramos Venancio <lvenanci@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: lwang@redhat.com Cc: riel@redhat.com Link: http://lkml.kernel.org/r/1492717903-5195-2-git-send-email-lvenanci@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Peter Zijlstra authored
commit 0372dd27 upstream. When building the overlapping groups, we very obviously should start with the previous domain of _this_ @cpu, not CPU-0. This can be readily demonstrated with a topology like: node 0 1 2 3 0: 10 20 30 20 1: 20 10 20 30 2: 30 20 10 20 3: 20 30 20 10 Where (for example) CPU1 ends up generating the following nonsensical groups: [] CPU1 attaching sched-domain: [] domain 0: span 0-2 level NUMA [] groups: 1 2 0 [] domain 1: span 0-3 level NUMA [] groups: 1-3 (cpu_capacity = 3072) 0-1,3 (cpu_capacity = 3072) Where the fact that domain 1 doesn't include a group with span 0-2 is the obvious fail. With patch this looks like: [] CPU1 attaching sched-domain: [] domain 0: span 0-2 level NUMA [] groups: 1 0 2 [] domain 1: span 0-3 level NUMA [] groups: 0-2 (cpu_capacity = 3072) 0,2-3 (cpu_capacity = 3072) Debugged-by:
-
Peter Zijlstra authored
commit c6508a39 upstream. commit c743f0a5 upstream. More users for for_each_cpu_wrap() have appeared. Promote the construct to generic cpumask interface. The implementation is slightly modified to reduce arguments. Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 1b568f0a. For the 4.9 kernel tree, this patch causes scheduler regressions. It is fixed in newer kernels with a large number of individual patches, the sum of which is too big for the stable kernel tree. Ingo recommended just reverting the single patch for this tree, as it's much simpler. Reported-by:
Ben Guthro <ben@guthro.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Horia Geantă authored
commit 7459e1d2 upstream. Driver does not properly handle the case when signals interrupt wait_for_completion_interruptible(): -it does not check for return value -completion structure is allocated on stack; in case a signal interrupts the sleep, it will go out of scope, causing the worker thread (caam_jr_dequeue) to fail when it accesses it wait_for_completion_interruptible() is replaced with uninterruptable wait_for_completion(). We choose to block all signals while waiting for I/O (device executing the split key generation job descriptor) since the alternative - in order to have a deterministic device state - would be to flush the job ring (aborting *all* in-progress jobs). Fixes: 045e3678 ("crypto: caam - ahash hmac support") Fixes: 4c1ec1f9 ("crypto: caam - refactor key_gen, sg") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
David Gstir authored
commit 854b06f7 upstream. Certain cipher modes like CTS expect the IV (req->info) of ablkcipher_request (or equivalently req->iv of skcipher_request) to contain the last ciphertext block when the {en,de}crypt operation is done. This is currently not the case for the CAAM driver which in turn breaks e.g. cts(cbc(aes)) when the CAAM driver is enabled. This patch fixes the CAAM driver to properly set the IV after the {en,de}crypt operation of ablkcipher finishes. This issue was revealed by the changes in the SW CTS mode in commit 0605c41c ("crypto: cts - Convert to skcipher") Signed-off-by:
David Gstir <david@sigma-star.at> Reviewed-by:
-
Herbert Xu authored
commit b82ce244 upstream. It has been reported that sha1-avx2 can cause page faults by reading beyond the end of the input. This patch disables it until it can be fixed. Fixes: 7c1da8d0 ("crypto: sha - SHA1 transform x86_64 AVX2") Reported-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
-
Gilad Ben-Yossef authored
commit 1606043f upstream. The Atmel SHA driver was treating -EBUSY as indication of queueing to backlog without checking that backlog is enabled for the request. Fix it by checking request flags. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
-
Martin Hicks authored
commit 03d2c511 upstream. An updated patch that also handles the additional key length requirements for the AEAD algorithms. The max keysize is not 96. For SHA384/512 it's 128, and for the AEAD algorithms it's longer still. Extend the max keysize for the AEAD size for AES256 + HMAC(SHA512). Fixes: 357fb605 ("crypto: talitos - add sha224, sha384 and sha512 to existing AEAD algorithms") Signed-off-by:
Martin Hicks <mort@bork.org> Acked-by:
-
Helge Deller authored
commit 37511fb5 upstream. Jörn Engel noticed that the expand_upwards() function might not return -ENOMEM in case the requested address is (unsigned long)-PAGE_SIZE and if the architecture didn't defined TASK_SIZE as multiple of PAGE_SIZE. Affected architectures are arm, frv, m68k, blackfin, h8300 and xtensa which all define TASK_SIZE as 0xffffffff, but since none of those have an upwards-growing stack we currently have no actual issue. Nevertheless let's fix this just in case any of the architectures with an upward-growing stack (currently parisc, metag and partly ia64) define TASK_SIZE similar. Link: http://lkml.kernel.org/r/20170702192452.GA11868@p100.box Fixes: bd726c90 ("Allow stack to grow up to address space limit") Signed-off-by:
Helge Deller <deller@gmx.de> Reported-by:
Jörn Engel <joern@purestorage.com> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andy Lutomirski authored
commit 796a3bae upstream. test_execve does rather odd mount manipulations to safely create temporary setuid and setgid executables that aren't visible to the rest of the system. Those executables end up in the test's cwd, but that cwd is MNT_DETACHed. The core namespace code considers MNT_DETACHed trees to belong to no mount namespace at all and, in general, MNT_DETACHed trees are only barely function. This interacted with commit 380cf5ba ("fs: Treat foreign mounts as nosuid") to cause all MNT_DETACHed trees to act as though they're nosuid, breaking the test. Fix it by just not detaching the tree. It's still in a private mount namespace and is therefore still invisible to the rest of the system (except via /proc, and the same nosuid logic will protect all other programs on the system from believing in test_execve's setuid bits). While we're at it, fix some blatant whitespace problems. Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: 380cf5ba ("fs: Treat foreign mounts as nosuid") Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Greg KH <greg@kroah.com> Cc: linux-kselftest@vger.kernel.org Signed-off-by:
Andy Lutomirski <luto@kernel.org> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Eric W. Biederman authored
commit 296990de upstream. Andrei Vagin pointed out that time to executue propagate_umount can go non-linear (and take a ludicrious amount of time) when the mount propogation trees of the mounts to be unmunted by a lazy unmount overlap. Make the walk of the mount propagation trees nearly linear by remembering which mounts have already been visited, allowing subsequent walks to detect when walking a mount propgation tree or a subtree of a mount propgation tree would be duplicate work and to skip them entirely. Walk the list of mounts whose propgatation trees need to be traversed from the mount highest in the mount tree to mounts lower in the mount tree so that odds are higher that the code will walk the largest trees first, allowing later tree walks to be skipped entirely. Add cleanup_umount_visitation to remover the code's memory of which mounts have been visited. Add the functions last_slave and skip_propagation_subtree to allow skipping appropriate parts of the mount propagation tree without needing to change the logic of the rest of the code. A script to generate overlapping mount propagation trees: $ cat runs.h set -e mount -t tmpfs zdtm /mnt mkdir -p /mnt/1 /mnt/2 mount -t tmpfs zdtm /mnt/1 mount --make-shared /mnt/1 mkdir /mnt/1/1 iteration=10 if [ -n "$1" ] ; then iteration=$1 fi for i in $(seq $iteration); do mount --bind /mnt/1/1 /mnt/1/1 done mount --rbind /mnt/1 /mnt/2 TIMEFORMAT='%Rs' nr=$(( ( 2 ** ( $iteration + 1 ) ) + 1 )) echo -n "umount -l /mnt/1 -> $nr " time umount -l /mnt/1 nr=$(cat /proc/self/mountinfo | grep zdtm | wc -l ) time umount -l /mnt/2 $ for i in $(seq 9 19); do echo $i; unshare -Urm bash ./run.sh $i; done Here are the performance numbers with and without the patch: mhash | 8192 | 8192 | 1048576 | 1048576 mounts | before | after | before | after ------------------------------------------------ 1025 | 0.040s | 0.016s | 0.038s | 0.019s 2049 | 0.094s | 0.017s | 0.080s | 0.018s 4097 | 0.243s | 0.019s | 0.206s | 0.023s 8193 | 1.202s | 0.028s | 1.562s | 0.032s 16385 | 9.635s | 0.036s | 9.952s | 0.041s 32769 | 60.928s | 0.063s | 44.321s | 0.064s 65537 | | 0.097s | | 0.097s 131073 | | 0.233s | | 0.176s 262145 | | 0.653s | | 0.344s 524289 | | 2.305s | | 0.735s 1048577 | | 7.107s | | 2.603s Andrei Vagin reports fixing the performance problem is part of the work to fix CVE-2016-6213. Fixes: a05964f3 ("[PATCH] shared mounts handling: umount") Reported-by:
Andrei Vagin <avagin@openvz.org> Reviewed-by:
Andrei Vagin <avagin@virtuozzo.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit 99b19d16 upstream. While investigating some poor umount performance I realized that in the case of overlapping mount trees where some of the mounts are locked the code has been failing to unmount all of the mounts it should have been unmounting. This failure to unmount all of the necessary mounts can be reproduced with: $ cat locked_mounts_test.sh mount -t tmpfs test-base /mnt mount --make-shared /mnt mkdir -p /mnt/b mount -t tmpfs test1 /mnt/b mount --make-shared /mnt/b mkdir -p /mnt/b/10 mount -t tmpfs test2 /mnt/b/10 mount --make-shared /mnt/b/10 mkdir -p /mnt/b/10/20 mount --rbind /mnt/b /mnt/b/10/20 unshare -Urm --propagation unchaged /bin/sh -c 'sleep 5; if [ $(grep test /proc/self/mountinfo | wc -l) -eq 1 ] ; then echo SUCCESS ; else echo FAILURE ; fi' sleep 1 umount -l /mnt/b wait %% $ unshare -Urm ./locked_mounts_test.sh This failure is corrected by removing the prepass that marks mounts that may be umounted. A first pass is added that umounts mounts if possible and if not sets mount mark if they could be unmounted if they weren't locked and adds them to a list to umount possibilities. This first pass reconsiders the mounts parent if it is on the list of umount possibilities, ensuring that information of umoutability will pass from child to mount parent. A second pass then walks through all mounts that are umounted and processes their children unmounting them or marking them for reparenting. A last pass cleans up the state on the mounts that could not be umounted and if applicable reparents them to their first parent that remained mounted. While a bit longer than the old code this code is much more robust as it allows information to flow up from the leaves and down from the trunk making the order in which mounts are encountered in the umount propgation tree irrelevant. Fixes: 0c56fe31 ("mnt: Don't propagate unmounts to locked mounts") Reviewed-by:
-
Eric W. Biederman authored
commit 570487d3 upstream. It was observed that in some pathlogical cases that the current code does not unmount everything it should. After investigation it was determined that the issue is that mnt_change_mntpoint can can change which mounts are available to be unmounted during mount propagation which is wrong. The trivial reproducer is: $ cat ./pathological.sh mount -t tmpfs test-base /mnt cd /mnt mkdir 1 2 1/1 mount --bind 1 1 mount --make-shared 1 mount --bind 1 2 mount --bind 1/1 1/1 mount --bind 1/1 1/1 echo grep test-base /proc/self/mountinfo umount 1/1 echo grep test-base /proc/self/mountinfo $ unshare -Urm ./pathological.sh The expected output looks like: 46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000 47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000 47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 The output without the fix looks like: 46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000 47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 49 54 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 50 53 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 51 49 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 54 47 0:25 /1/1 /mnt/1/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 53 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 52 50 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 46 31 0:25 / /mnt rw,relatime - tmpfs test-base rw,uid=1000,gid=1000 47 46 0:25 /1 /mnt/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 48 46 0:25 /1 /mnt/2 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 52 48 0:25 /1/1 /mnt/2/1 rw,relatime shared:1 - tmpfs test-base rw,uid=1000,gid=1000 That last mount in the output was in the propgation tree to be unmounted but was missed because the mnt_change_mountpoint changed it's parent before the walk through the mount propagation tree observed it. Fixes: 1064f874 ("mnt: Tuck mounts under others instead of creating shadow/side mounts.") Acked-by:
Ram Pai <linuxram@us.ibm.com> Signed-off-by:
-
Johan Hovold authored
commit 3360acdf upstream. Make sure to deregister and release the nvmem device and underlying memory on registration errors. Note that the private data must be freed using put_device() once the struct device has been initialised. Also note that there's a related reference leak in the deregistration function as reported by Mika Westerberg which is being fixed separately. Fixes: b6c217ab ("nvmem: Add backwards compatibility support for older EEPROM drivers.") Fixes: eace75cf ("nvmem: Add a simple NVMEM framework for nvmem providers") Cc: Andrew Lunn <andrew@lunn.ch> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Paul E. McKenney authored
commit 6b5fc3a1 upstream. Wait/wakeup operations do not guarantee ordering on their own. Instead, either locking or memory barriers are required. This commit therefore adds memory barriers to wake_nocb_leader() and nocb_leader_wait(). Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by:
Krister Johansen <kjlx@templeofstupid.com> Signed-off-by:
-
Adam Borowski authored
commit 6987dc8a upstream. Only read access is checked before this call. Actually, at the moment this is not an issue, as every in-tree arch does the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU to tell them apart, but this wasn't the case in the past and may happen again on some odd arch in the future. If anyone cares about 3.7 and earlier, this is a security hole (untested) on real 80386 CPUs. Signed-off-by:
Adam Borowski <kilobyte@angband.pl> Signed-off-by:
-
Marc Zyngier authored
commit 88cda007 upstream. Contrary to popular belief, PPIs connected to a GICv3 to not have an affinity field similar to that of GICv2. That is consistent with the fact that GICv3 is designed to accomodate thousands of CPUs, and fitting them as a bitmap in a byte is... difficult. Fixes: adbc3695 ("arm64: dts: add the Marvell Armada 3700 family and a development board") Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Kees Cook authored
commit da029c11 upstream. To avoid pathological stack usage or the need to special-case setuid execs, just limit all arg stack usage to at most 75% of _STK_LIM (6MB). Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kees Cook authored
commit a73dc537 upstream. Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, which is the traditional x86 minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). For s390 the position could be 0x10000, but that is needlessly close to the NULL address. Link: http://lkml.kernel.org/r/1498154792-49952-5-git-send-email-keescook@chromium.orgSigned-off-by:
-
Kees Cook authored
commit 47ebb09d upstream. Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, which is the traditional x86 minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). Link: http://lkml.kernel.org/r/1498154792-49952-4-git-send-email-keescook@chromium.orgSigned-off-by:
Michael Ellerman <mpe@ellerman.id.au> Acked-by:
-
Kees Cook authored
commit 02445990 upstream. Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, to match ARM. This could be 0x8000, the standard ET_EXEC load address, but that is needlessly close to the NULL address, and anyone running arm compat PIE will have an MMU, so the tight mapping is not needed. Link: http://lkml.kernel.org/r/1498251600-132458-4-git-send-email-keescook@chromium.orgSigned-off-by:
-
Kees Cook authored
commit 6a9af90a upstream. Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. 4MB is chosen here mainly to have parity with x86, where this is the traditional minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). For ARM the position could be 0x8000, the standard ET_EXEC load address, but that is needlessly close to the NULL address, and anyone running PIE on 32-bit ARM will have an MMU, so the tight mapping is not needed. Link: http://lkml.kernel.org/r/1498154792-49952-2-git-send-email-keescook@chromium.orgSigned-off-by:
-
Kees Cook authored
commit eab09532 upstream. The ELF_ET_DYN_BASE position was originally intended to keep loaders away from ET_EXEC binaries. (For example, running "/lib/ld-linux.so.2 /bin/cat" might cause the subsequent load of /bin/cat into where the loader had been loaded.) With the advent of PIE (ET_DYN binaries with an INTERP Program Header), ELF_ET_DYN_BASE continued to be used since the kernel was only looking at ET_DYN. However, since ELF_ET_DYN_BASE is traditionally set at the top 1/3rd of the TASK_SIZE, a substantial portion of the address space is unused. For 32-bit tasks when RLIMIT_STACK is set to RLIM_INFINITY, programs are loaded above the mmap region. This means they can be made to collide (CVE-2017-1000370) or nearly collide (CVE-2017-1000371) with pathological stack regions. Lowering ELF_ET_DYN_BASE solves both by moving programs below the mmap region in all cases, and will now additionally avoid programs falling back to the mmap region by enforcing MAP_FIXED for program loads (i.e. if it would have collided with the stack, now it will fail to load instead of falling back to the mmap region). To allow for a lower ELF_ET_DYN_BASE, loaders (ET_DYN without INTERP) are loaded into the mmap region, leaving space available for either an ET_EXEC binary with a fixed location or PIE being loaded into mmap by the loader. Only PIE programs are loaded offset from ELF_ET_DYN_BASE, which means architectures can now safely lower their values without risk of loaders colliding with their subsequently loaded programs. For 64-bit, ELF_ET_DYN_BASE is best set to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. Thanks to PaX Team, Daniel Micay, and Rik van Riel for inspiration and suggestions on how to implement this solution. Fixes: d1fd836d ("mm: split ET_DYN ASLR from mmap ASLR") Link: http://lkml.kernel.org/r/20170621173201.GA114489@beastSigned-off-by:
Rik van Riel <riel@redhat.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Qualys Security Advisory <qsa@qualys.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Pratyush Anand <panand@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Cyril Bur authored
commit 8d81ae05 upstream. As of perl 5, version 26, subversion 0 (v5.26.0) some new warnings have occurred when running checkpatch. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){ <-- HERE \s*/ at scripts/checkpatch.pl line 3544. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){ <-- HERE \s*/ at scripts/checkpatch.pl line 3885. Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by <-- HERE in m/^(\+.*(?:do|\))){ <-- HERE / at scripts/checkpatch.pl line 4374. It seems perfectly reasonable to do as the warning suggests and simply escape the left brace in these three locations. Link: http://lkml.kernel.org/r/20170607060135.17384-1-cyrilbur@gmail.comSigned-off-by:
Cyril Bur <cyrilbur@gmail.com> Acked-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Sahitya Tummala authored
commit b17c070f upstream. __list_lru_walk_one() acquires nlru spin lock (nlru->lock) for longer duration if there are more number of items in the lru list. As per the current code, it can hold the spin lock for upto maximum UINT_MAX entries at a time. So if there are more number of items in the lru list, then "BUG: spinlock lockup suspected" is observed in the below path: spin_bug+0x90 do_raw_spin_lock+0xfc _raw_spin_lock+0x28 list_lru_add+0x28 dput+0x1c8 path_put+0x20 terminate_walk+0x3c path_lookupat+0x100 filename_lookup+0x6c user_path_at_empty+0x54 SyS_faccessat+0xd0 el0_svc_naked+0x24 This nlru->lock is acquired by another CPU in this path - d_lru_shrink_move+0x34 dentry_lru_isolate_shrink+0x48 __list_lru_walk_one.isra.10+0x94 list_lru_walk_node+0x40 shrink_dcache_sb+0x60 do_remount_sb+0xbc do_emergency_remount+0xb0 process_one_work+0x228 worker_thread+0x2e0 kthread+0xf4 ret_from_fork+0x10 Fix this lockup by reducing the number of entries to be shrinked from the lru list to 1024 at once. Also, add cond_resched() before processing the lru list again. Link: http://marc.info/?t=149722864900001&r=1&w=2 Link: http://lkml.kernel.org/r/1498707575-2472-1-git-send-email-stummala@codeaurora.orgSigned-off-by:
Sahitya Tummala <stummala@codeaurora.org> Suggested-by:
Jan Kara <jack@suse.cz> Suggested-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by:
-
Sahitya Tummala authored
commit 2c80cd57 upstream. list_lru_count_node() iterates over all memcgs to get the total number of entries on the node but it can race with memcg_drain_all_list_lrus(), which migrates the entries from a dead cgroup to another. This can return incorrect number of entries from list_lru_count_node(). Fix this by keeping track of entries per node and simply return it in list_lru_count_node(). Link: http://lkml.kernel.org/r/1498707555-30525-1-git-send-email-stummala@codeaurora.orgSigned-off-by:
-
Marcin Nowakowski authored
commit c0d80dda upstream. core_kernel_text is used by MIPS in its function graph trace processing, so having this method traced leads to an infinite set of recursive calls such as: Call Trace: ftrace_return_to_handler+0x50/0x128 core_kernel_text+0x10/0x1b8 prepare_ftrace_return+0x6c/0x114 ftrace_graph_caller+0x20/0x44 return_to_handler+0x10/0x30 return_to_handler+0x0/0x30 return_to_handler+0x0/0x30 ftrace_ops_no_ops+0x114/0x1bc core_kernel_text+0x10/0x1b8 core_kernel_text+0x10/0x1b8 core_kernel_text+0x10/0x1b8 ftrace_ops_no_ops+0x114/0x1bc core_kernel_text+0x10/0x1b8 prepare_ftrace_return+0x6c/0x114 ftrace_graph_caller+0x20/0x44 (...) Mark the function notrace to avoid it being traced. Link: http://lkml.kernel.org/r/1498028607-6765-1-git-send-email-marcin.nowakowski@imgtec.comSigned-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Kirill A. Shutemov authored
commit bbf29ffc upstream. Reinette reported the following crash: BUG: Bad page state in process log2exe pfn:57600 page:ffffea00015d8000 count:0 mapcount:0 mapping: (null) index:0x20200 flags: 0x4000000000040019(locked|uptodate|dirty|swapbacked) raw: 4000000000040019 0000000000000000 0000000000020200 00000000ffffffff raw: ffffea00015d8020 ffffea00015d8020 0000000000000000 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: 0x1(locked) Modules linked in: rfcomm 8021q bnep intel_rapl x86_pkg_temp_thermal coretemp efivars btusb btrtl btbcm pwm_lpss_pci snd_hda_codec_hdmi btintel pwm_lpss snd_hda_codec_realtek snd_soc_skl snd_hda_codec_generic snd_soc_skl_ipc spi_pxa2xx_platform snd_soc_sst_ipc snd_soc_sst_dsp i2c_designware_platform i2c_designware_core snd_hda_ext_core snd_soc_sst_match snd_hda_intel snd_hda_codec mei_me snd_hda_core mei snd_soc_rt286 snd_soc_rl6347a snd_soc_core efivarfs CPU: 1 PID: 354 Comm: log2exe Not tainted 4.12.0-rc7-test-test #19 Hardware name: Intel corporation NUC6CAYS/NUC6CAYB, BIOS AYAPLCEL.86A.0027.2016.1108.1529 11/08/2016 Call Trace: bad_page+0x16a/0x1f0 free_pages_check_bad+0x117/0x190 free_hot_cold_page+0x7b1/0xad0 __put_page+0x70/0xa0 madvise_free_huge_pmd+0x627/0x7b0 madvise_free_pte_range+0x6f8/0x1150 __walk_page_range+0x6b5/0xe30 walk_page_range+0x13b/0x310 madvise_free_page_range.isra.16+0xad/0xd0 madvise_free_single_vma+0x2e4/0x470 SyS_madvise+0x8ce/0x1450 If somebody frees the page under us and we hold the last reference to it, put_page() would attempt to free the page before unlocking it. The fix is trivial reorder of operations. Dave said: "I came up with the exact same patch. For posterity, here's the test case, generated by syzkaller and trimmed down by Reinette: https://www.sr71.net/~dave/intel/log2.c And the config that helps detect this: https://www.sr71.net/~dave/intel/config-log2" Fixes: b8d3c4c3 ("mm/huge_memory.c: don't split THP page when MADV_FREE syscall is called") Link: http://lkml.kernel.org/r/20170628101249.17879-1-kirill.shutemov@linux.intel.comSigned-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
Reinette Chatre <reinette.chatre@intel.com> Acked-by:
Dave Hansen <dave.hansen@intel.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by:
-
Ben Hutchings authored
commit 98dcea0c upstream. liblockdep has been broken since commit 75dd602a ("lockdep: Fix lock_chain::base size"), as that adds a check that MAX_LOCK_DEPTH is within the range of lock_chain::depth and in liblockdep it is much too large. That should have resulted in a compiler error, but didn't because: - the check uses ARRAY_SIZE(), which isn't yet defined in liblockdep so is assumed to be an (undeclared) function - putting a function call inside a BUILD_BUG_ON() expression quietly turns it into some nonsense involving a variable-length array It did produce a compiler warning, but I didn't notice because liblockdep already produces too many warnings if -Wall is enabled (which I'll fix shortly). Even before that commit, which reduced lock_chain::depth from 8 bits to 6, MAX_LOCK_DEPTH was too large. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: a.p.zijlstra@chello.nl Link: http://lkml.kernel.org/r/20170525130005.5947-3-alexander.levin@verizon.comSigned-off-by:
-
Helge Deller authored
commit 649aa242 upstream. This is because of commit f98db601 ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler") in which switch_mm_irqs_off() is called by the scheduler, vs switch_mm() which is used by use_mm(). This patch lets the parisc code mirror the x86 and powerpc code, ie. it disables interrupts in switch_mm(), and optimises the scheduler case by defining switch_mm_irqs_off(). Signed-off-by:
-
Thomas Bogendoerfer authored
commit 33f9e024 upstream. Enabling parport pc driver on a B2600 (and probably other 64bit PARISC systems) produced following BUG: CPU: 0 PID: 1 Comm: swapper Not tainted 4.12.0-rc5-30198-g1132d5e7 #156 task: 000000009e050000 task.stack: 000000009e04c000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001101111111100001111 Not tainted r00-03 000000ff0806ff0f 000000009e04c990 0000000040871b78 000000009e04cac0 r04-07 0000000040c14de0 ffffffffffffffff 000000009e07f098 000000009d82d200 r08-11 000000009d82d210 0000000000000378 0000000000000000 0000000040c345e0 r12-15 0000000000000005 0000000040c345e0 0000000000000000 0000000040c9d5e0 r16-19 0000000040c345e0 00000000f00001c4 00000000f00001bc 0000000000000061 r20-23 000000009e04ce28 0000000000000010 0000000000000010 0000000040b89e40 r24-27 0000000000000003 0000000000ffffff 000000009d82d210 0000000040c14de0 r28-31 0000000000000000 000000009e04ca90 000000009e04cb40 0000000000000000 sr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000404aece0 00000000404aece4 IIR: 03ffe01f ISR: 0000000010340000 IOR: 000001781304cac8 CPU: 0 CR30: 000000009e04c000 CR31: 00000000e2976de2 ORIG_R28: 0000000000000200 IAOQ[0]: sba_dma_supported+0x80/0xd0 IAOQ[1]: sba_dma_supported+0x84/0xd0 RP(r2): parport_pc_probe_port+0x178/0x1200 Cause is a call to dma_coerce_mask_and_coherenet in parport_pc_probe_port, which PARISC DMA API doesn't handle very nicely. This commit gives back DMA_ERROR_CODE for DMA API calls, if device isn't capable of DMA transaction. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Eric Biggers authored
commit b0f94efd upstream. Architectures with a compat syscall table must put compat_sys_keyctl() in it, not sys_keyctl(). The parisc architecture was not doing this; fix it. Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
-
Helge Deller authored
commit 24746231 upstream. When a process runs out of stack the parisc kernel wrongly faults with SIGBUS instead of the expected SIGSEGV signal. This example shows how the kernel faults: do_page_fault() command='a.out' type=15 address=0xfaac2000 in libc-2.24.so[f8308000+16c000] trap #15: Data TLB miss fault, vm_start = 0xfa2c2000, vm_end = 0xfaac2000 The vma->vm_end value is the first address which does not belong to the vma, so adjust the check to include vma->vm_end to the range for which to send the SIGSEGV signal. This patch unbreaks building the debian libsigsegv package. Signed-off-by:
-
Suzuki K Poulose authored
commit 866d7c1b upstream. The GICv3 driver doesn't check if the target CPU for gic_set_affinity is valid before going ahead and making the changes. This triggers the following splat with KASAN: [ 141.189434] BUG: KASAN: global-out-of-bounds in gic_set_affinity+0x8c/0x140 [ 141.189704] Read of size 8 at addr ffff200009741d20 by task swapper/1/0 [ 141.189958] [ 141.190158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.12.0-rc7 [ 141.190458] Hardware name: Foundation-v8A (DT) [ 141.190658] Call trace: [ 141.190908] [<ffff200008089d70>] dump_backtrace+0x0/0x328 [ 141.191224] [<ffff20000808a1b4>] show_stack+0x14/0x20 [ 141.191507] [<ffff200008504c3c>] dump_stack+0xa4/0xc8 [ 141.191858] [<ffff20000826c19c>] print_address_description+0x13c/0x250 [ 141.192219] [<ffff20000826c5c8>] kasan_report+0x210/0x300 [ 141.192547] [<ffff20000826ad54>] __asan_load8+0x84/0x98 [ 141.192874] [<ffff20000854eeec>] gic_set_affinity+0x8c/0x140 [ 141.193158] [<ffff200008148b14>] irq_do_set_affinity+0x54/0xb8 [ 141.193473] [<ffff200008148d2c>] irq_set_affinity_locked+0x64/0xf0 [ 141.193828] [<ffff200008148e00>] __irq_set_affinity+0x48/0x78 [ 141.194158] [<ffff200008bc48a4>] arm_perf_starting_cpu+0x104/0x150 [ 141.194513] [<ffff2000080d73bc>] cpuhp_invoke_callback+0x17c/0x1f8 [ 141.194783] [<ffff2000080d94ec>] notify_cpu_starting+0x8c/0xb8 [ 141.195130] [<ffff2000080911ec>] secondary_start_kernel+0x15c/0x200 [ 141.195390] [<0000000080db81b4>] 0x80db81b4 [ 141.195603] [ 141.195685] The buggy address belongs to the variable: [ 141.196012] __cpu_logical_map+0x200/0x220 [ 141.196176] [ 141.196315] Memory state around the buggy address: [ 141.196586] ffff200009741c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.196913] ffff200009741c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.197158] >ffff200009741d00: 00 00 00 00 fa fa fa fa 00 00 00 00 00 00 00 00 [ 141.197487] ^ [ 141.197758] ffff200009741d80: 00 00 00 00 00 00 00 00 fa fa fa fa 00 00 00 00 [ 141.198060] ffff200009741e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 141.198358] ================================================================== [ 141.198609] Disabling lock debugging due to kernel taint [ 141.198961] CPU1: Booted secondary processor [410fd051] This patch adds the check to make sure the cpu is valid. Fixes: commit 021f6537 ("irqchip: gic-v3: Initial support for GICv3") Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
-
Srinivas Dasari authored
commit 0a27844c upstream. nla policy checks for only maximum length of the attribute data when the attribute type is NLA_BINARY. If userspace sends less data than specified, cfg80211 may access illegal memory. When type is NLA_UNSPEC, nla policy check ensures that userspace sends minimum specified length number of bytes. Remove type assignment to NLA_BINARY from nla_policy of NL80211_NAN_FUNC_SERVICE_ID to make these NLA_UNSPEC and to make sure minimum NL80211_NAN_FUNC_SERVICE_ID_LEN bytes are received from userspace with NL80211_NAN_FUNC_SERVICE_ID. Fixes: a442b761 ("cfg80211: add add_nan_func / del_nan_func") Signed-off-by:
Srinivas Dasari <dasaris@qti.qualcomm.com> Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Srinivas Dasari authored
commit 9361df14 upstream. nla policy checks for only maximum length of the attribute data when the attribute type is NLA_BINARY. If userspace sends less data than specified, the wireless drivers may access illegal memory. When type is NLA_UNSPEC, nla policy check ensures that userspace sends minimum specified length number of bytes. Remove type assignment to NLA_BINARY from nla_policy of NL80211_ATTR_PMKID to make this NLA_UNSPEC and to make sure minimum WLAN_PMKID_LEN bytes are received from userspace with NL80211_ATTR_PMKID. Fixes: 67fbb16b ("nl80211: PMKSA caching support") Signed-off-by:
-
Srinivas Dasari authored
commit d7f13f74 upstream. validate_scan_freqs() retrieves frequencies from attributes nested in the attribute NL80211_ATTR_SCAN_FREQUENCIES with nla_get_u32(), which reads 4 bytes from each attribute without validating the size of data received. Attributes nested in NL80211_ATTR_SCAN_FREQUENCIES don't have an nla policy. Validate size of each attribute before parsing to avoid potential buffer overread. Fixes: 2a519311 ("cfg80211/nl80211: scanning (and mac80211 update to use it)") Signed-off-by:
-
Srinivas Dasari authored
commit 8feb69c7 upstream. Buffer overread may happen as nl80211_set_station() reads 4 bytes from the attribute NL80211_ATTR_LOCAL_MESH_POWER_MODE without validating the size of data received when userspace sends less than 4 bytes of data with NL80211_ATTR_LOCAL_MESH_POWER_MODE. Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE to avoid the buffer overread. Fixes: 3b1c5a53 ("{cfg,nl}80211: mesh power mode primitives and userspace access") Signed-off-by:
-
Bert Kenward authored
[ Upstream commit c70d6815 ] If we have more than 32 unicast MAC addresses assigned to an interface we will read beyond the end of the address table in the driver when adding filters. The next 256 entries store multicast addresses, so we will end up attempting to insert duplicate filters, which is mostly harmless. If we add more than 288 unicast addresses we will then read past the multicast address table, which is likely to be more exciting. Fixes: 12fb0da4 ("sfc: clean fallbacks between promisc/normal in efx_ef10_filter_sync_rx_mode") Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
