If an SSP/SMP IO times out, it may be actually in reality be
simultaneously processing completion of the slot in
slot_complete_vx_hw().

Then if the slot is freed in slot_complete_vx_hw() (this IPTT is freed
and it may be re-used by other slot), and we may abort the wrong slot in
hisi_sas_abort_task().

So to solve the issue, free the slot after the check of
SAS_TASK_STATE_ABORTED in slot_complete_vx_hw().
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

If SMP/internal IO times out, we will possibly free the task immediately.

However if the IO actually completes at the same time, the IO completion
may refer to task which has been freed.

So to solve the issue, flush the tasklet to finish IO completion before
free'ing slot/task.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In evaluating hisi_hba, the sas_port may be NULL, so for safety relocate
the the check to value possible NULL deference.
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

At directly attached situation, if the user modifies the sysfs interface
of maximum_linkrate and minimum_linkrate to renegotiate the linkrate
between SAS controller and target, the value of both files mentioned
above should have change to user setting after renegotiate is over, but
it remains unchanged.

To fix this bug, maximum_linkrate and minimum_linkrate will be directly
fed back to relevant sas_phy structure.
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

With the addition of commit 00d909a1 ("scsi: target: Make the session
shutdown code also wait for commands that are being aborted") in v4.19-rc, it
incorrectly assumes no signals will be pending for task_struct executing the
normal session shutdown and I/O quiesce code-path.

For example, iscsi-target and iser-target issue SIGINT to all kthreads as part
of session shutdown.  This has been the behaviour since day one.

As-is when signals are pending with se_cmds active in se_sess->sess_cmd_list,
wait_event_interruptible_lock_irq_timeout() returns a negative number and
immediately kills the machine because of the do while (ret <= 0) loop that was
added in commit 00d909a1 to spin while backend I/O is taking any amount of
extended time (say 30 seconds) to complete.

Here's what it looks like in action with debug plus delayed backend I/O
completion:

[ 4951.909951] se_sess: 000000003e7e08fa before target_wait_for_sess_cmds
[ 4951.914600] target_wait_for_sess_cmds: signal_pending: 1
[ 4951.918015] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 0
[ 4951.921639] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 1
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 2
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 3
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 4
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 5
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 6
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 7
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 8
[ 4951.921944] wait_event_interruptible_lock_irq_timeout ret: -512 signal_pending: 1 loop count: 9

... followed by the usual RCU CPU stalls and deadlock.

There was never a case pre commit 00d909a1 where
wait_for_complete(&se_cmd->cmd_wait_comp) was able to be interrupted, so to
address this for v4.19+ moving forward go ahead and use
wait_event_lock_irq_timeout() instead so new code works with all fabric
drivers.

Also for commit 00d909a1, fix a minor regression in
target_release_cmd_kref() to only wake_up the new se_sess->cmd_list_wq only
when shutdown has actually been triggered via se_sess->sess_tearing_down.

Fixes: 00d909a1 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted")
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Tested-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Short of reverting commit 00d909a1 ("scsi: target: Make the session
shutdown code also wait for commands that are being aborted") for v4.19,
target-core needs a wait_event_t macro can be executed using
TASK_UNINTERRUPTIBLE to function correctly with existing fabric drivers that
expect to run with signals pending during session shutdown and active se_cmd
I/O quiesce.

The most notable is iscsi-target/iser-target, while ibmvscsi_tgt invokes
session shutdown logic from userspace via configfs attribute that could also
potentially have signals pending.

So go ahead and introduce wait_event_lock_irq_timeout() to achieve this, and
update + rename __wait_event_lock_irq_timeout() to make it accept 'state' as a
parameter.

Fixes: 00d909a1 ("scsi: target: Make the session shutdown code also wait for commands that are being aborted")
Cc: <stable@vger.kernel.org> # v4.19+
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When we fail to analyse the payload of a PRLI response we should reset
the state machine to retry the PRLI; eventually we will be getting a
proper frame.  Not doing so will result in a stuck state machine and the
port never to be presented to the systsm.
Suggested-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Arun Easi <arun.easi@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

We should not assume the payload of a PRLI or PLOGI respons is always
present.
Signed-off-by: Thomas Abraham <tabraham@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Arun Easi <arun.easi@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When an RSCN gets delayed (or not being sent at all), the transport class
will detect an error, EH kicks in, and eventually will be setting the
device to offline.  If we receive an RSCN after that, the device will
stay in 'offline'.  This patch allows for an 'offline' to 'blocked'
transition, thereby allowing the device to become active again.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The dma_addr_t member is unused ever since we switched the SCSI
layer to send down single-segement command using a scatterlist
as well many years ago.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Except for the mac_esp driver, which uses PIO or pseudo DMA, all drivers
share the same dma mapping calls.  Move the dma mapping into the core
code using the scsi_dma_map / scsi_dma_unmap helpers, with a special
identify mapping variant triggered off a new ESP_FLAG_NO_DMA_MAP flag
for mac_esp.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

We can simplify use esp->dev now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

esp->dev is a void pointer that points either to a struct device, or a
struct platform_device.  As we can easily get from the device to the
platform_device if needed change it to always point to a struct device
and properly type the pointer to avoid errors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

esp_sbus_map_command_block is called straight from the probe routine
without any locks held, so we can safely use GFP_KERNEL here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Remove usage of the legacy PCI DMA API.  To make this easier we also
store a struct device instead of pci_dev in the dev field of struct
esp.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Per Qcom's UFS host controller HW design, the UFS Tx lane1 clock could be
muxed with Tx lane0 clock, hence keep Tx lane1 clock optional by ignoring
it if it is not provided in device tree. This change also performs some
cleanup to lanes per direction checks when enable/disable lane clocks
just for symmetry.
Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

We get a warning from 'make headers_check' about a newly introduced usage
of integer types in the scsi/scsi_bsg_ufs.h uapi header:

usr/include/scsi/scsi_bsg_ufs.h:18: found __[us]{8,16,32,64} type without #include <linux/types.h>

Aside from the missing linux/types.h inclusion, I also noticed that it
uses the wrong types: 'u32' is not available at all in user space, and
'uint32_t' depends on the inclusion of a standard header that we should
not include from kernel headers.

Change the all to __u32 and similar types here.

I also note the usage of '__be32' and '__be16' that seems unfortunate for
a user space API. I wonder if it would be better to define the interface
in terms of a CPU-endian structure and convert it in kernel space.

Fixes: e77044c5 ("scsi: ufs-bsg: Add support for uic commands in ufs_bsg_request()")
Fixes: df032bf2 ("scsi: ufs: Add a bsg endpoint that supports UPIUs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

dma_alloc_coherent allocates memory that can be used by the cpu and the
device at the same time, calls to pci_dma_sync_* are not required, and in
fact actively harmful on some architectures like arm.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The dma_map_sg / dma_unmap_sg APIs called from scsi_dma_map /
scsi_dma_unmap already transfer memory ownership to the device or cpu
respectively.  Adding additional calls to pci_dma_sync_sg_* will in fact
lead to data corruption if we end up using swiotlb for some reason.

Also remove the now pointless megaraid_mbox_sync_scb function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

There are extraneous parantheses that are causing clang to produce a
warning so remove these.

Clean up 3 clang warnings:
equality comparison with extraneous parentheses [-Wparentheses-equality]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Make ufshcd_send_uic_cmd() public for that.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Do that for the currently supported UPIUs: query, nop out, and task
management.

We do not support UPIU of type scsi command yet, while we are using the
job's request and reply pointers to hold the payload.  We will look into
it in later patches. We might need to elaborate the raw upiu api for
that.

We also still not supporting uic commands: For first phase, we plan to
use the existing api, and send only uic commands that are already
supported. Anyway, all that will come in the next patch.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The UFS host software uses a combination of a host register set and
Transfer Request Descriptors in system memory to communicate with host
controller hardware. In its mmio space, a separate places are assigned
to UTP Transfer Request Descriptor ("utrd") list, and to UTP Task
Management Request Descriptor ("utmrd") list.

The provided API supports utrd-typed requests: nop out and device
management commands. It also supports utmrd-type requests:
task management requests. Other UPIU types are not supported for now.

We utilize the already existing code for tag and task work queues.
That is, all utrd-typed UPIUs are "disguised" as device management
commands. Similarly, the utmrd-typed UPUIs uses the task management
infrastructure.

It is up to the caller to fill the upiu request properly, as it will be
copied without any further input validations.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Use the structure size in pointer arithmetic instead of an opaque 32
bytes for the over-allocation of descriptors.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

For now, just provide an API to allocate and remove ufs-bsg node. We
will use this framework to manage ufs devices by sending UPIU
transactions.

For the time being, implements an empty bsg_request() - will add some
more functionality in coming patches.

Nonetheless, we reveal here the protocol we are planning to use: UFS
Transport Protocol Transactions. UFS transactions consist of packets
called UFS Protocol Information Units (UPIU).

There are UPIU’s defined for UFS SCSI commands, responses, data in and
data out, task management, utility functions, vendor functions,
transaction synchronization and control, and more.

By using UPIUs, we get access to the most fine-grained internals of this
protocol, and able to communicate with the device in ways, that are
sometimes beyond the capacity of the ufs driver.

Moreover and as a result, our core structure - ufs_bsg_node has a pretty
lean structure: using upiu transactions that contains the outmost
detailed info, so we don't really need complex constructs to support it.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

in preparation to send UPIU requests via bsg.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add a helper that takes a utp_task_req_desc and issues it, which will
be useful for UFS bsg support.  Rewrite ufshcd_issue_tm_cmd0x to use
this new helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Remove the pointless task_req_upiu and task_rsp_upiu indirections,
which are __le32 arrays always cast to given structures and just add
the members directly.  Also clean up variables names in use in the
callers a bit to make the code more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

lockdep_assert_held() is better suited to checking locking requirements, since
it won't get confused when someone else holds the lock. This is also a step
towards possibly removing spin_is_locked().
Signed-off-by: Lance Roy <ldr709@gmail.com>
Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Clang warns when multiple pairs of parentheses are used for a single
conditional statement.

drivers/scsi/mpt3sas/mpt3sas_base.c:535:11: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
        if ((ioc == NULL))
             ~~~~^~~~~~~
drivers/scsi/mpt3sas/mpt3sas_base.c:535:11: note: remove extraneous
parentheses around the comparison to silence this warning
        if ((ioc == NULL))
            ~    ^      ~
drivers/scsi/mpt3sas/mpt3sas_base.c:535:11: note: use '=' to turn this
equality comparison into an assignment
        if ((ioc == NULL))
                 ^~
                 =
drivers/scsi/mpt3sas/mpt3sas_base.c:539:12: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
        if ((pdev == NULL))
             ~~~~~^~~~~~~
drivers/scsi/mpt3sas/mpt3sas_base.c:539:12: note: remove extraneous
parentheses around the comparison to silence this warning
        if ((pdev == NULL))
            ~     ^      ~
drivers/scsi/mpt3sas/mpt3sas_base.c:539:12: note: use '=' to turn this
equality comparison into an assignment
        if ((pdev == NULL))
                  ^~
                  =
2 warnings generated.

Remove them and while we're at it, simplify the NULL checks as '!var' is
used more than 'var == NULL'.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Replaced dma_pool_alloc + memset with dma_pool_zalloc.
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

All the uses have been removed, delete the macro.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Convert these uses to ioc_<level> where appropriate.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Remove the logging level as panic calls stop the machine and should always be
emitted regardless of requested logging level.

These existing panic uses are perhaps inappropriate.

Miscellanea:

o Coalesce formats and convert MPT3SAS_FMT to "%s: " to improve clarity
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Convert the existing 2 uses to make the format and arguments matching more
obvious.

Miscellanea:

o Move the word "enabled" into the format to trivially reduce object size
o Remove unnecessary parentheses
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

These have misordered uses of __func__ and ioc->name that could mismatch
MPT3SAS_FMT and "%s: ".

Convert them to ioc_<level>.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Use a more common logging style.

Done using the perl script below and some typing

$ git grep --name-only -w MPT3SAS_FMT -- "*.c" | \
  xargs perl -i -e 'local $/; while (<>) { s/\bpr_(info|err|notice|warn)\s*\(\s*MPT3SAS_FMT\s*("[^"]+"(?:\s*\\?\s*"[^"]+"\s*){0,5}\s*),\s*ioc->name\s*/ioc_\1(ioc, \2/g; print;}'

Miscellanea for these conversions:

o Coalesce formats
o Realign arguments
o Remove unnecessary parentheses
o Use casts to u64 instead of unsigned long long where appropriate
o Convert broken pr_info uses to pr_cont
o Fix broken format string concatenation with line continuations and
  excess whitespace
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

These macros can help identify specific logging uses and eventually perhaps
reduce object sizes.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The uapi header file listed in the cxlflash stanza has a typo.

Removed the trailing 's' from the filename.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew R. Ochs <mrochs@linux.ibm.com>
Acked-by: Uma Krishnan <ukrishn@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This patch fixes commit bcc71cc3 ("scsi: qla2xxx: Fix for double
free of SRB structure") which placed code in wrong routines.

Also updated the use of WARN_ON() to WARN_ON_ONCE() to prevent
flooding log messages.

Fixes: bcc71cc3 ("scsi: qla2xxx: Fix for double free of SRB structure")
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>