- 02 Dec, 2019 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2019-11-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Important fix to uAPI alignment on query IOCTL - Fixes for the power regression introduced by the previous security patches - Avoid regressing super heavy benchmarks by increasing the default request pre-emption timeout from 100 ms to 640 ms to - Resulting set of smaller fixes done while problem was inspected - Display fixes for EHL voltage level programming and TGL DKL PHY vswing for HDMI Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191128141524.GA11992@jlahtine-desk.ger.corp.intel.com
-
https://gitlab.freedesktop.org/drm/msmDave Airlie authored
+ OCMEM support to enable the couple generations that had shared OCMEM rather than GMEM exclusively for the GPU (late a3xx and I think basically all of a4xx). Bjorn and Brian decided to land this through the drm tree to avoid having to coordinate merge requests. + a510 support, and various associated display support + the usual misc cleanups and fixes Signed-off-by:
-
- 27 Nov, 2019 2 commits
-
-
Chris Wilson authored
On context retiring, we may invoke the kernel_context to unpin this context. Elsewhere, we may use the kernel_context to modify this context. This currently leads to an AB-BA lock inversion, so we need to back-off from the contended lock, and repeat. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111732Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Fixes: a9877da2 ("drm/i915/oa: Reconfigure contexts on the fly") Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191126065521.2331017-1-chris@chris-wilson.co.uk (cherry picked from commit 58b4c1a0) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Chris Wilson authored
Based on a sampling of a number of benchmarks across platforms, by default opt for a much more lenient timeout so that we should not adversely affect existing "good" clients. 640ms ought to be enough for anyone. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112169 Fixes: 3a7a92ab ("drm/i915/execlists: Force preemption") Signed-off-by:
-
- 26 Nov, 2019 1 commit
-
-
Chris Wilson authored
In order to avoid some nasty mutex inversions, commit 09c5ab38 ("drm/i915: Keep rings pinned while the context is active") allowed the intel_ring unpinning to be run concurrently with the next context pinning it. Thus each step in intel_ring_unpin() needed to be atomic and ordered in a nice onion with intel_ring_pin() so that the lifetimes overlapped and were always safe. Sadly, a few steps in intel_ring_unpin() were overlooked, such as closing the read/write pointers of the ring and discarding the intel_ring.vaddr, as these steps were not serialised with intel_ring_pin() and so could leave the ring in disarray. Fixes: 09c5ab38 ("drm/i915: Keep rings pinned while the context is active") Signed-off-by:
-
- 25 Nov, 2019 14 commits
-
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
drm-next-5.5-2019-11-22: amdgpu: - Fix bad DMA on some PPC platforms - MMHUB fix for powergating - BACO fix for Navi - Misc raven fixes - Enable vbios fetch directly from rom on navi - debugfs fix for DC - SR-IOV fixes for arcturus - Misc power fixes radeon: - Fix bad DMA on some PPC platforms Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Reverts a patch to avoid spinning forever when context's timeline is active but has no requests Signed-off-by:
-
Chris Wilson authored
The major drawback of commit 7e34f4e4 ("drm/i915/gen8+: Add RC6 CTX corruption WA") is that it disables RC6 while Skylake (and friends) is active, and we do not consider the GPU idle until all outstanding requests have been retired and the engine switched over to the kernel context. If userspace is idle, this task falls onto our background idle worker, which only runs roughly once a second, meaning that userspace has to have been idle for a couple of seconds before we enable RC6 again. Naturally, this causes us to consume considerably more energy than before as powersaving is effectively disabled while a display server (here's looking at you Xorg) is running. As execlists will get a completion event as each context is completed, we can use this interrupt to queue a retire worker bound to this engine to cleanup idle timelines. We will then immediately notice the idle engine (without userspace intervention or the aid of the background retire worker) and start parking the GPU. Thus during light workloads, we will do much more work to idle the GPU faster... Hopefully with commensurate power saving! v2: Watch context completions and only look at those local to the engine when retiring to reduce the amount of excess work we perform. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112315 References: 7e34f4e4 ("drm/i915/gen8+: Add RC6 CTX corruption WA") References: 2248a283 ("drm/i915/gen8+: Add RC6 CTX corruption WA") Signed-off-by:
-
Chris Wilson authored
In the next patch, we will introduce a new asynchronous retirement worker, fed by execlists CS events. Here we may queue a retirement as soon as a request is submitted to HW (and completes instantly), and we also want to process that retirement as early as possible and cannot afford to postpone (as there may not be another opportunity to retire it for a few seconds). To allow the new async retirer to run in parallel with our submission, pull the __i915_request_queue (that passes the request to HW) inside the timelines spinlock so that the retirement cannot release the timeline before we have completed the submission. v2: Actually to play nicely with engine_retire, we have to raise the timeline.active_lock before releasing the HW. intel_gt_retire_requsts() is still serialised by the outer lock so they cannot see this intermediate state, and engine_retire is serialised by HW submission. Signed-off-by:
-
Chris Wilson authored
I rushed a last minute correction to cancel_port_requests() to prevent the snooping of *execlists->active as the inflight array was being updated, without noticing we iterated the inflight array starting from active! Oops. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112387 Fixes: 97f9af78 ("drm/i915/gt: Mark the execlists->active as the primary volatile access") Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191125112520.1760492-1-chris@chris-wilson.co.uk (cherry picked from commit da0ef77e) [Joonas: Fixed Fixes: tag to match drm-intel-next-fixes] Signed-off-by:
-
Chris Wilson authored
Since we want to do a lockless read of the current active request, and that request is written to by process_csb also without serialisation, we need to instruct gcc to take care in reading the pointer itself. Otherwise, we have observed execlists_active() to report 0x40. [ 2400.760381] igt/para-4098 1..s. 2376479300us : process_csb: rcs0 cs-irq head=3, tail=4 [ 2400.760826] igt/para-4098 1..s. 2376479303us : process_csb: rcs0 csb[4]: status=0x00000001:0x00000000 [ 2400.761271] igt/para-4098 1..s. 2376479306us : trace_ports: rcs0: promote { b9c59:2622, b9c55:2624 } [ 2400.761726] igt/para-4097 0d... 2376479311us : __i915_schedule: rcs0: -2147483648->3, inflight:0000000000000040, rq:ffff888208c1e940 which is impossible! The answer is that as we keep the existing execlists->active pointing into the array as we copy over that array, the unserialised read may see a partial pointer value. Fixes: df403069 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock") Signed-off-by:Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191125094318.1630806-1-chris@chris-wilson.co.uk (cherry picked from commit 331bf905) Signed-off-by:
-
Chris Wilson authored
In commit a79ca656 ("drm/i915: Push the wakeref->count deferral to the backend"), I erroneously concluded that we last modify the engine inside __i915_request_commit() meaning that we could enable concurrent submission for userspace as we enqueued this request. However, this falls into a trap with other users of the engine->kernel_context waking up and submitting their request before the idle-switch is queued, with the result that the kernel_context is executed out-of-sequence most likely upsetting the GPU and certainly ourselves when we try to retire the out-of-sequence requests. As such we need to hold onto the effective engine->kernel_context mutex lock (via the engine pm mutex proxy) until we have finish queuing the request to the engine. v2: Serialise against concurrent intel_gt_retire_requests() v3: Describe the hairy locking scheme with intel_gt_retire_requests() for future reference. v4: Combine timeline->lock and engine pm release; it's hairy. Fixes: a79ca656 ("drm/i915: Push the wakeref->count deferral to the backend") Signed-off-by:
-
Chris Wilson authored
The general concept was that intel_timeline.active_count was locked by the intel_timeline.mutex. The exception was for power management, where the engine->kernel_context->timeline could be manipulated under the global wakeref.mutex. This was quite solid, as we always manipulated the timeline only while we held an engine wakeref. And then we started retiring requests outside of struct_mutex, only using the timelines.active_list and the timeline->mutex. There we started manipulating intel_timeline.active_count outside of an engine wakeref, and so introduced a race between __engine_park() and intel_gt_retire_requests(), a race that could result in the engine->kernel_context not being added to the active timelines and so losing requests, which caused us to keep the system permanently powered up [and unloadable]. The race would be easy to close if we could take the engine wakeref for the timeline before we retire -- except timelines are not bound to any engine and so we would need to keep all active engines awake. The alternative is to guard intel_timeline_enter/intel_timeline_exit for use outside of the timeline->mutex. Fixes: e5dadff4 ("drm/i915: Protect request retirement with timeline->mutex") Signed-off-by:
-
Chris Wilson authored
Previously, we assumed we could use mutex_trylock() within an atomic context, falling back to a worker if contended. However, such trickery is illegal inside interrupt context, and so we need to always use a worker under such circumstances. As we normally are in process context, we can typically use a plain mutex, and only defer to a work when we know we are being called from an interrupt path. Fixes: 51fbd8de ("drm/i915/pmu: Atomically acquire the gt_pm wakeref") References: a0855d24 ("locking/mutex: Complain upon mutex API misuse in IRQ contexts") References: https://bugs.freedesktop.org/show_bug.cgi?id=111626Signed-off-by:
-
Chris Wilson authored
When waiting for idle, serialise with any ongoing callback so that it will have completed before completing the wait. Signed-off-by:
-
Chris Wilson authored
pm_suspend_target_state is declared under CONFIG_PM_SLEEP but only defined under CONFIG_SUSPEND. Play safe and only use the symbol if it is both declared and defined. Reported-by: kbuild-all@lists.01.org Signed-off-by:
-
Tvrtko Ursulin authored
Commit 750e76b4 ("drm/i915/gt: Move the [class][inst] lookup for engines onto the GT") changed the engine query to iterate over uabi engines but left the buffer size calculation look at the physical engine count. Difference has no practical consequence but it is nicer to align both queries. Signed-off-by:
-
Matt Roper authored
The bspec initially provided a single DKL PHY vswing table for both HDMI and DP, but was recently updated to include an independent table for HDMI. Bspec: 49292 Fixes: 978c3e53 ("drm/i915/tgl: Add dkl phy programming sequences") Cc: Clinton A Taylor <clinton.a.taylor@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191118180219.9309-1-matthew.d.roper@intel.comReviewed-by:
José Roberto de Souza <jose.souza@intel.com> (cherry picked from commit 362bfb99) Signed-off-by:
-
Matt Roper authored
The bspec was recently updated with new cdclk -> voltage level tables to accommodate the new 324/326.4 cdclk values. Bspec: 21809 Fixes: 63c9dae7 ("drm/i915/ehl: Add voltage level requirement table") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Vivek Kasireddy <vivek.kasireddy@intel.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
-
- 22 Nov, 2019 21 commits
-
-
changzhu authored
It may lose gpuvm invalidate acknowldege state across power-gating off cycle. To avoid this issue in gmc9/gmc10 invalidation, add semaphore acquire before invalidation and semaphore release after invalidation. After adding semaphore acquire before invalidation, the semaphore register become read-only if another process try to acquire semaphore. Then it will not be able to release this semaphore. Then it may cause deadlock problem. If this deadlock problem happens, it needs a semaphore firmware fix. Signed-off-by:
changzhu <Changfeng.Zhu@amd.com> Acked-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
changzhu authored
SW must acquire/release one of the vm_invalidate_eng*_sem around the invalidation req/ack. Through this way,it can avoid losing invalidate acknowledge state across power-gating off cycle. To use vm_invalidate_eng*_sem, it needs to initialize vm_invalidate_eng*_sem firstly. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Jack Zhang authored
After rlcg fw 2.1, kmd driver starts to load extra fw for LIST_CNTL,GPM_MEM,SRM_MEM. We needs to skip the three fw because all rlcg related fw have been loaded by host driver. Guest driver would load the three fw fail without this change. Signed-off-by:
Jack Zhang <Jack.Zhang1@amd.com> Acked-by:
-
Jack Zhang authored
Temporarily skip ras,dtm,hdcp initialize and terminate for arcturus VF Currently the three features haven't been enabled at SRIOV, it would trigger guest driver load fail with the bare-metal path of the three features. Signed-off-by:
-
Xiaojie Yuan authored
This patch fixes 2nd baco reset failure with gfxoff enabled on navi1x. clear state buffer (resides in vram) is corrupted after 1st baco reset, upon gfxoff exit, CPF gets garbage header in CSIB and hangs. Signed-off-by:
Xiaojie Yuan <xiaojie.yuan@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Stephen Rothwell authored
Reviewed-by:
Kevin Wang <kevin1.wang@amd.com> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Jay Cornwall authored
Signed-off-by:
Jay Cornwall <jay.cornwall@amd.com> Acked-by:
-
Xiaojie Yuan authored
Fixes: 0900a9ef ("drm/amdgpu/gfx10: fix mqd backup/restore for gfx rings (v2)") Signed-off-by:
-
Xiaojie Yuan authored
50us is not enough to wait for cp ready after gpu reset on some navi asics. Signed-off-by:
Jack Xiao <Jack.Xiao@amd.com> Acked-by:
-
Alex Deucher authored
This reverts commit 1c425915. S/G display is not stable with the IOMMU enabled on some platforms. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205523Acked-by:
-
Alex Deucher authored
There are still combinations of sbios and firmware that are not stable. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=204689Acked-by:
-
Alex Deucher authored
5.4 and newer works fine with navi14. Reviewed-by:
-
Alex Deucher authored
When gfxoff is enabled, accessing gfx registers via MMIO can lead to a hang. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205497Acked-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Alex Deucher authored
So that the setting reflects what the hw supports. This will be used in a subsequent patch so needs to be correct. v2: squash in fix from Colin Ian King Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205497Reviewed-by:
-
Sam Bobroff authored
The INTERRUPT_CNTL2 register expects a valid DMA address, but is currently set with a GPU MC address. This can cause problems on systems that detect the resulting DMA read from an invalid address (found on a Power8 guest). Instead, use the DMA address of the dummy page because it will always be safe. Fixes: 27ae1064 ("drm/amdgpu: add interupt handler implementation for si v3") Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by:
-
Sam Bobroff authored
The INTERRUPT_CNTL2 register expects a valid DMA address, but is currently set with a GPU MC address. This can cause problems on systems that detect the resulting DMA read from an invalid address (found on a Power8 guest). Instead, use the DMA address of the dummy page because it will always be safe. Fixes: d8f60cfc ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)") Fixes: 25a857fb ("drm/radeon/kms: add support for interrupts on SI") Fixes: a59781bb ("drm/radeon: add support for interrupts on CIK (v5)") Signed-off-by:
-
Mikita Lipski authored
[why] Previous patch allowed to initialize debugfs entries on both MST and SST connectors, but MST connectors get registered much later which exposed an issue of debugfs entries being initialized in the same folder. [how] Return SST debugfs entries' initialization back to where it was. For MST connectors we should initialize debugfs entries in connector register function after the connector is registered. Signed-off-by:
Mikita Lipski <mikita.lipski@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Alex Deucher authored
Needed as a fallback if the vbios can't be fetched by other means. Reviewed-by:
-
Yintian Tao authored
There is one regression from 042f3d7b745cd76aa To put flush_delayed_work after adev->shutdown = true which will make amdgpu_ih_process not response the irq At last, all ib ring tests will be failed just like below [drm] amdgpu: finishing device. [drm] Fence fallback timer expired on ring gfx [drm] Fence fallback timer expired on ring comp_1.0.0 [drm] Fence fallback timer expired on ring comp_1.1.0 [drm] Fence fallback timer expired on ring comp_1.2.0 [drm] Fence fallback timer expired on ring comp_1.3.0 [drm] Fence fallback timer expired on ring comp_1.0.1 amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on comp_1.1.1 (-110). amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on comp_1.2.1 (-110). amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on comp_1.3.1 (-110). amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on sdma0 (-110). amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on sdma1 (-110). amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on uvd_enc_0.0 (-110). amdgpu 0000:00:07.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on vce0 (-110). [drm:amdgpu_device_delayed_init_work_handler [amdgpu]] *ERROR* ib ring test failed (-110). v2: replace cancel_delayed_work_sync() with flush_delayed_work() Signed-off-by:
Yintian Tao <yttao@amd.com> Reviewed-by:
-
Leo Liu authored
Signed-off-by:
Leo Liu <leo.liu@amd.com> Reviewed-by:
James Zhu <James.Zhu@amd.com> Signed-off-by:
-
Evan Quan authored
For fine grained dpm, there is only two levels supported. However to reflect correctly the current clock frequency, there is an intermediate level faked. Thus on forcing level setting, we need to treat level 2 correctly as level 1. Signed-off-by:
-
