Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_nvme.c: In function ‘lpfc_nvme_ls_abort’:
 drivers/scsi/lpfc/lpfc_nvme.c:943:19: warning: variable ‘phba’ set but not used [-Wunused-but-set-variable]
 drivers/scsi/lpfc/lpfc_nvme.c:256: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_create_queue'
 drivers/scsi/lpfc/lpfc_nvme.c:804: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_ls_req'
 drivers/scsi/lpfc/lpfc_nvme.c:804: warning: Excess function parameter 'nvme_rport' description in 'lpfc_nvme_ls_req'
 drivers/scsi/lpfc/lpfc_nvme.c:1312: warning: Function parameter or member 'lpfc_ncmd' not described in 'lpfc_nvme_prep_io_cmd'
 drivers/scsi/lpfc/lpfc_nvme.c:1312: warning: Excess function parameter 'lpfcn_cmd' description in 'lpfc_nvme_prep_io_cmd'
 drivers/scsi/lpfc/lpfc_nvme.c:1416: warning: Function parameter or member 'lpfc_ncmd' not described in 'lpfc_nvme_prep_io_dma'
 drivers/scsi/lpfc/lpfc_nvme.c:1416: warning: Excess function parameter 'lpfcn_cmd' description in 'lpfc_nvme_prep_io_dma'
 drivers/scsi/lpfc/lpfc_nvme.c:1594: warning: bad line:  indicated in @lpfc_nvme_rport.
 drivers/scsi/lpfc/lpfc_nvme.c:1605: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_fcp_io_submit'
 drivers/scsi/lpfc/lpfc_nvme.c:1605: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_fcp_io_submit'
 drivers/scsi/lpfc/lpfc_nvme.c:1605: warning: Function parameter or member 'pnvme_fcreq' not described in 'lpfc_nvme_fcp_io_submit'
 drivers/scsi/lpfc/lpfc_nvme.c:1605: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_fcp_io_submit'
 drivers/scsi/lpfc/lpfc_nvme.c:1605: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_fcp_io_submit'
 drivers/scsi/lpfc/lpfc_nvme.c:1605: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_fcp_io_submit'
 drivers/scsi/lpfc/lpfc_nvme.c:1605: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_fcp_io_submit'
 drivers/scsi/lpfc/lpfc_nvme.c:1852: warning: Function parameter or member 'abts_cmpl' not described in 'lpfc_nvme_abort_fcreq_cmpl'
 drivers/scsi/lpfc/lpfc_nvme.c:1852: warning: Excess function parameter 'rspiocb' description in 'lpfc_nvme_abort_fcreq_cmpl'
 drivers/scsi/lpfc/lpfc_nvme.c:1888: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_fcp_abort'
 drivers/scsi/lpfc/lpfc_nvme.c:1888: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_fcp_abort'
 drivers/scsi/lpfc/lpfc_nvme.c:1888: warning: Function parameter or member 'pnvme_fcreq' not described in 'lpfc_nvme_fcp_abort'
 drivers/scsi/lpfc/lpfc_nvme.c:1888: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_fcp_abort'
 drivers/scsi/lpfc/lpfc_nvme.c:1888: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_fcp_abort'
 drivers/scsi/lpfc/lpfc_nvme.c:1888: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_fcp_abort'
 drivers/scsi/lpfc/lpfc_nvme.c:1888: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_fcp_abort'
 drivers/scsi/lpfc/lpfc_nvme.c:2089: warning: Function parameter or member 'ndlp' not described in 'lpfc_get_nvme_buf'
 drivers/scsi/lpfc/lpfc_nvme.c:2089: warning: Function parameter or member 'idx' not described in 'lpfc_get_nvme_buf'
 drivers/scsi/lpfc/lpfc_nvme.c:2089: warning: Function parameter or member 'expedite' not described in 'lpfc_get_nvme_buf'
 drivers/scsi/lpfc/lpfc_nvme.c:2193: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_create_localport'
 drivers/scsi/lpfc/lpfc_nvme.c:2326: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_destroy_localport'
 drivers/scsi/lpfc/lpfc_nvme.c:2326: warning: Excess function parameter 'pnvme' description in 'lpfc_nvme_destroy_localport'
 drivers/scsi/lpfc/lpfc_nvme.c:2544: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_rescan_port'
 drivers/scsi/lpfc/lpfc_nvme.c:2544: warning: Function parameter or member 'ndlp' not described in 'lpfc_nvme_rescan_port'

Link: https://lore.kernel.org/r/20201102142359.561122-13-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/ufs/ufshcd.c:6603: warning: Function parameter or member 'hba' not described in 'ufshcd_try_to_abort_task'
 drivers/scsi/ufs/ufshcd.c:6603: warning: Function parameter or member 'tag' not described in 'ufshcd_try_to_abort_task'
 drivers/scsi/ufs/ufshcd.c:6603: warning: Excess function parameter 'cmd' description in 'ufshcd_try_to_abort_task'

Link: https://lore.kernel.org/r/20201102142359.561122-12-lee.jones@linaro.org
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Santosh Yaraganavi <santosh.sy@samsung.com>
Cc: Vinayak Holikatti <h.vinayak@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_nvme.c: In function ‘lpfc_nvme_ls_abort’:
 drivers/scsi/lpfc/lpfc_nvme.c:943:19: warning: variable ‘phba’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20201102142359.561122-11-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/esas2r/esas2r_init.c: In function ‘esas2r_init_adapter’:
 drivers/scsi/esas2r/esas2r_init.c:418:41: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]

Link: https://lore.kernel.org/r/20201102142359.561122-10-lee.jones@linaro.org
Cc: Bradley Grove <linuxdrivers@attotech.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/esas2r/esas2r_disc.c: In function ‘esas2r_disc_get_phys_addr’:
 drivers/scsi/esas2r/esas2r_disc.c:1035:17: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

Link: https://lore.kernel.org/r/20201102142359.561122-9-lee.jones@linaro.org
Cc: Bradley Grove <linuxdrivers@attotech.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_bsg.c:917: warning: Function parameter or member 'phba' not described in 'lpfc_bsg_ct_unsol_event'
 drivers/scsi/lpfc/lpfc_bsg.c:917: warning: Function parameter or member 'pring' not described in 'lpfc_bsg_ct_unsol_event'
 drivers/scsi/lpfc/lpfc_bsg.c:1484: warning: Function parameter or member 'cmp' not described in 'lpfc_issue_ct_rsp'
 drivers/scsi/lpfc/lpfc_bsg.c:3900: warning: Function parameter or member 'job' not described in 'lpfc_bsg_sli_cfg_read_cmd_ext'
 drivers/scsi/lpfc/lpfc_bsg.c:3900: warning: Function parameter or member 'dmabuf' not described in 'lpfc_bsg_sli_cfg_read_cmd_ext'
 drivers/scsi/lpfc/lpfc_bsg.c:3900: warning: Excess function parameter 'mb' description in 'lpfc_bsg_sli_cfg_read_cmd_ext'
 drivers/scsi/lpfc/lpfc_bsg.c:3900: warning: Excess function parameter 'dmabuff' description in 'lpfc_bsg_sli_cfg_read_cmd_ext'
 drivers/scsi/lpfc/lpfc_bsg.c:4088: warning: Function parameter or member 'job' not described in 'lpfc_bsg_sli_cfg_write_cmd_ext'
 drivers/scsi/lpfc/lpfc_bsg.c:4088: warning: Function parameter or member 'nemb_tp' not described in 'lpfc_bsg_sli_cfg_write_cmd_ext'
 drivers/scsi/lpfc/lpfc_bsg.c:4088: warning: Function parameter or member 'dmabuf' not described in 'lpfc_bsg_sli_cfg_write_cmd_ext'
 drivers/scsi/lpfc/lpfc_bsg.c:4088: warning: Excess function parameter 'mb' description in 'lpfc_bsg_sli_cfg_write_cmd_ext'
 drivers/scsi/lpfc/lpfc_bsg.c:4088: warning: Excess function parameter 'dmabuff' description in 'lpfc_bsg_sli_cfg_write_cmd_ext'
 drivers/scsi/lpfc/lpfc_bsg.c:4254: warning: Function parameter or member 'job' not described in 'lpfc_bsg_handle_sli_cfg_mbox'
 drivers/scsi/lpfc/lpfc_bsg.c:4254: warning: Function parameter or member 'dmabuf' not described in 'lpfc_bsg_handle_sli_cfg_mbox'
 drivers/scsi/lpfc/lpfc_bsg.c:4254: warning: Excess function parameter 'mb' description in 'lpfc_bsg_handle_sli_cfg_mbox'
 drivers/scsi/lpfc/lpfc_bsg.c:4254: warning: Excess function parameter 'dmabuff' description in 'lpfc_bsg_handle_sli_cfg_mbox'
 drivers/scsi/lpfc/lpfc_bsg.c:4403: warning: Function parameter or member 'job' not described in 'lpfc_bsg_read_ebuf_get'
 drivers/scsi/lpfc/lpfc_bsg.c:4403: warning: Excess function parameter 'dmabuf' description in 'lpfc_bsg_read_ebuf_get'
 drivers/scsi/lpfc/lpfc_bsg.c:4474: warning: Function parameter or member 'job' not described in 'lpfc_bsg_write_ebuf_set'
 drivers/scsi/lpfc/lpfc_bsg.c:4600: warning: Function parameter or member 'job' not described in 'lpfc_bsg_handle_sli_cfg_ebuf'
 drivers/scsi/lpfc/lpfc_bsg.c:4600: warning: Function parameter or member 'dmabuf' not described in 'lpfc_bsg_handle_sli_cfg_ebuf'
 drivers/scsi/lpfc/lpfc_bsg.c:4600: warning: Excess function parameter 'mb' description in 'lpfc_bsg_handle_sli_cfg_ebuf'
 drivers/scsi/lpfc/lpfc_bsg.c:4600: warning: Excess function parameter 'dmabuff' description in 'lpfc_bsg_handle_sli_cfg_ebuf'
 drivers/scsi/lpfc/lpfc_bsg.c:4645: warning: Function parameter or member 'job' not described in 'lpfc_bsg_handle_sli_cfg_ext'
 drivers/scsi/lpfc/lpfc_bsg.c:4645: warning: Function parameter or member 'dmabuf' not described in 'lpfc_bsg_handle_sli_cfg_ext'
 drivers/scsi/lpfc/lpfc_bsg.c:4645: warning: Excess function parameter 'mb' description in 'lpfc_bsg_handle_sli_cfg_ext'
 drivers/scsi/lpfc/lpfc_bsg.c:4645: warning: Excess function parameter 'dmabuff' description in 'lpfc_bsg_handle_sli_cfg_ext'
 drivers/scsi/lpfc/lpfc_bsg.c:4723: warning: Function parameter or member 'job' not described in 'lpfc_bsg_issue_mbox'
 drivers/scsi/lpfc/lpfc_bsg.c:4723: warning: Excess function parameter 'mb' description in 'lpfc_bsg_issue_mbox'

Link: https://lore.kernel.org/r/20201102142359.561122-8-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_debugfs.c:4204: warning: Function parameter or member 'len' not described in 'lpfc_idiag_queacc_read_qe'
 drivers/scsi/lpfc/lpfc_debugfs.c:4781: warning: Function parameter or member 'ctlregid' not described in 'lpfc_idiag_ctlacc_read_reg'
 drivers/scsi/lpfc/lpfc_debugfs.c:4781: warning: Excess function parameter 'drbregid' description in 'lpfc_idiag_ctlacc_read_reg'

Link: https://lore.kernel.org/r/20201102142359.561122-7-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 from drivers/scsi/lpfc/lpfc_attr.c:26:
 inlined from ‘lpfc_stat_data_ctrl_store’ at drivers/scsi/lpfc/lpfc_attr.c:4165:3:
 drivers/scsi/lpfc/lpfc_attr.c:2537: warning: Function parameter or member 'attr' not described in 'lpfc_vport_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2537: warning: Function parameter or member 'default' not described in 'lpfc_vport_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2537: warning: Function parameter or member 'minval' not described in 'lpfc_vport_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2537: warning: Function parameter or member 'maxval' not described in 'lpfc_vport_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2537: warning: Excess function parameter 'phba' description in 'lpfc_vport_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2537: warning: Excess function parameter 'val' description in 'lpfc_vport_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2792: warning: Function parameter or member 'dev' not described in 'lpfc_soft_wwpn_store'
 drivers/scsi/lpfc/lpfc_attr.c:2886: warning: Function parameter or member 'dev' not described in 'lpfc_soft_wwnn_store'
 drivers/scsi/lpfc/lpfc_attr.c:2886: warning: Function parameter or member 'attr' not described in 'lpfc_soft_wwnn_store'
 drivers/scsi/lpfc/lpfc_attr.c:2886: warning: Excess function parameter 'cdev' description in 'lpfc_soft_wwnn_store'
 drivers/scsi/lpfc/lpfc_attr.c:3224: warning: Function parameter or member 'vpt_wwpn' not described in 'lpfc_oas_lun_state_set'
 drivers/scsi/lpfc/lpfc_attr.c:3224: warning: Function parameter or member 'tgt_wwpn' not described in 'lpfc_oas_lun_state_set'
 drivers/scsi/lpfc/lpfc_attr.c:3224: warning: Function parameter or member 'pri' not described in 'lpfc_oas_lun_state_set'
 drivers/scsi/lpfc/lpfc_attr.c:3224: warning: Excess function parameter 'ndlp' description in 'lpfc_oas_lun_state_set'
 drivers/scsi/lpfc/lpfc_attr.c:3264: warning: Function parameter or member 'lun_pri' not described in 'lpfc_oas_lun_get_next'
 drivers/scsi/lpfc/lpfc_attr.c:3302: warning: Function parameter or member 'pri' not described in 'lpfc_oas_lun_state_change'
 drivers/scsi/lpfc/lpfc_attr.c:3376: warning: Function parameter or member 'count' not described in 'lpfc_oas_lun_store'
 drivers/scsi/lpfc/lpfc_attr.c:3835: warning: Function parameter or member 'vport' not described in 'lpfc_tgt_queue_depth_set'
 drivers/scsi/lpfc/lpfc_attr.c:3835: warning: Excess function parameter 'phba' description in 'lpfc_tgt_queue_depth_set'
 drivers/scsi/lpfc/lpfc_attr.c:4026: warning: Function parameter or member 'dev' not described in 'lpfc_topology_store'
 drivers/scsi/lpfc/lpfc_attr.c:4026: warning: Function parameter or member 'attr' not described in 'lpfc_topology_store'
 drivers/scsi/lpfc/lpfc_attr.c:4026: warning: Function parameter or member 'buf' not described in 'lpfc_topology_store'
 drivers/scsi/lpfc/lpfc_attr.c:4026: warning: Function parameter or member 'count' not described in 'lpfc_topology_store'
 drivers/scsi/lpfc/lpfc_attr.c:4026: warning: Excess function parameter 'phba' description in 'lpfc_topology_store'
 drivers/scsi/lpfc/lpfc_attr.c:4026: warning: Excess function parameter 'val' description in 'lpfc_topology_store'
 drivers/scsi/lpfc/lpfc_attr.c:4148: warning: Function parameter or member 'attr' not described in 'lpfc_stat_data_ctrl_store'
 drivers/scsi/lpfc/lpfc_attr.c:4302: warning: Function parameter or member 'attr' not described in 'lpfc_stat_data_ctrl_show'
 drivers/scsi/lpfc/lpfc_attr.c:4383: warning: Function parameter or member 'buf' not described in 'sysfs_drvr_stat_data_read'
 drivers/scsi/lpfc/lpfc_attr.c:4383: warning: Excess function parameter 'buff' description in 'sysfs_drvr_stat_data_read'
 drivers/scsi/lpfc/lpfc_attr.c:4476: warning: Function parameter or member 'dev' not described in 'lpfc_link_speed_store'
 drivers/scsi/lpfc/lpfc_attr.c:4476: warning: Function parameter or member 'attr' not described in 'lpfc_link_speed_store'
 drivers/scsi/lpfc/lpfc_attr.c:4476: warning: Function parameter or member 'buf' not described in 'lpfc_link_speed_store'
 drivers/scsi/lpfc/lpfc_attr.c:4476: warning: Function parameter or member 'count' not described in 'lpfc_link_speed_store'
 drivers/scsi/lpfc/lpfc_attr.c:4476: warning: Excess function parameter 'phba' description in 'lpfc_link_speed_store'
 drivers/scsi/lpfc/lpfc_attr.c:4476: warning: Excess function parameter 'val' description in 'lpfc_link_speed_store'
 drivers/scsi/lpfc/lpfc_attr.c:7117: warning: Function parameter or member 'verbose' not described in 'lpfc_hba_log_verbose_init'

Link: https://lore.kernel.org/r/20201102142359.561122-6-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Kernel-doc does not understand this use-case.

Fixes the following W=1 kernel build warning(s):

 from drivers/scsi/lpfc/lpfc_attr.c:26:
 inlined from ‘lpfc_stat_data_ctrl_store’ at drivers/scsi/lpfc/lpfc_attr.c:4164:3:
 drivers/scsi/lpfc/lpfc_attr.c:2315: warning: Excess function parameter 'dev' description in 'lpfc_param_show'
 drivers/scsi/lpfc/lpfc_attr.c:2315: warning: Excess function parameter 'buf' description in 'lpfc_param_show'
 drivers/scsi/lpfc/lpfc_attr.c:2343: warning: Excess function parameter 'dev' description in 'lpfc_param_hex_show'
 drivers/scsi/lpfc/lpfc_attr.c:2343: warning: Excess function parameter 'buf' description in 'lpfc_param_hex_show'
 drivers/scsi/lpfc/lpfc_attr.c:2377: warning: Function parameter or member 'attr' not described in 'lpfc_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2377: warning: Function parameter or member 'default' not described in 'lpfc_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2377: warning: Function parameter or member 'minval' not described in 'lpfc_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2377: warning: Function parameter or member 'maxval' not described in 'lpfc_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2377: warning: Excess function parameter 'phba' description in 'lpfc_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2377: warning: Excess function parameter 'val' description in 'lpfc_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2414: warning: Function parameter or member 'attr' not described in 'lpfc_param_set'
 drivers/scsi/lpfc/lpfc_attr.c:2414: warning: Function parameter or member 'default' not described in 'lpfc_param_set'
 drivers/scsi/lpfc/lpfc_attr.c:2414: warning: Function parameter or member 'minval' not described in 'lpfc_param_set'
 drivers/scsi/lpfc/lpfc_attr.c:2414: warning: Function parameter or member 'maxval' not described in 'lpfc_param_set'
 drivers/scsi/lpfc/lpfc_attr.c:2414: warning: Excess function parameter 'phba' description in 'lpfc_param_set'
 drivers/scsi/lpfc/lpfc_attr.c:2414: warning: Excess function parameter 'val' description in 'lpfc_param_set'
 drivers/scsi/lpfc/lpfc_attr.c:2454: warning: Excess function parameter 'dev' description in 'lpfc_param_store'
 drivers/scsi/lpfc/lpfc_attr.c:2454: warning: Excess function parameter 'buf' description in 'lpfc_param_store'
 drivers/scsi/lpfc/lpfc_attr.c:2454: warning: Excess function parameter 'count' description in 'lpfc_param_store'
 drivers/scsi/lpfc/lpfc_attr.c:2478: warning: Excess function parameter 'dev' description in 'lpfc_vport_param_show'
 drivers/scsi/lpfc/lpfc_attr.c:2478: warning: Excess function parameter 'buf' description in 'lpfc_vport_param_show'
 drivers/scsi/lpfc/lpfc_attr.c:2503: warning: Excess function parameter 'dev' description in 'lpfc_vport_param_hex_show'
 drivers/scsi/lpfc/lpfc_attr.c:2503: warning: Excess function parameter 'buf' description in 'lpfc_vport_param_hex_show'
 drivers/scsi/lpfc/lpfc_attr.c:2536: warning: Function parameter or member 'attr' not described in 'lpfc_vport_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2536: warning: Function parameter or member 'default' not described in 'lpfc_vport_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2536: warning: Function parameter or member 'minval' not described in 'lpfc_vport_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2536: warning: Function parameter or member 'maxval' not described in 'lpfc_vport_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2536: warning: Excess function parameter 'phba' description in 'lpfc_vport_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2536: warning: Excess function parameter 'val' description in 'lpfc_vport_param_init'
 drivers/scsi/lpfc/lpfc_attr.c:2572: warning: Function parameter or member 'attr' not described in 'lpfc_vport_param_set'
 drivers/scsi/lpfc/lpfc_attr.c:2572: warning: Function parameter or member 'default' not described in 'lpfc_vport_param_set'
 drivers/scsi/lpfc/lpfc_attr.c:2572: warning: Function parameter or member 'minval' not described in 'lpfc_vport_param_set'
 drivers/scsi/lpfc/lpfc_attr.c:2572: warning: Function parameter or member 'maxval' not described in 'lpfc_vport_param_set'
 drivers/scsi/lpfc/lpfc_attr.c:2572: warning: Excess function parameter 'phba' description in 'lpfc_vport_param_set'
 drivers/scsi/lpfc/lpfc_attr.c:2572: warning: Excess function parameter 'val' description in 'lpfc_vport_param_set'
 drivers/scsi/lpfc/lpfc_attr.c:2607: warning: Function parameter or member 'attr' not described in 'lpfc_vport_param_store'
 drivers/scsi/lpfc/lpfc_attr.c:2607: warning: Excess function parameter 'cdev' description in 'lpfc_vport_param_store'
 drivers/scsi/lpfc/lpfc_attr.c:2607: warning: Excess function parameter 'buf' description in 'lpfc_vport_param_store'
 drivers/scsi/lpfc/lpfc_attr.c:2607: warning: Excess function parameter 'count' description in 'lpfc_vport_param_store'
 drivers/scsi/lpfc/lpfc_attr.c:7081: warning: Function parameter or member 'field' not described in 'lpfc_rport_show_function'
 drivers/scsi/lpfc/lpfc_attr.c:7081: warning: Function parameter or member 'format_string' not described in 'lpfc_rport_show_function'
 drivers/scsi/lpfc/lpfc_attr.c:7081: warning: Function parameter or member 'sz' not described in 'lpfc_rport_show_function'
 drivers/scsi/lpfc/lpfc_attr.c:7081: warning: Function parameter or member 'cast' not described in 'lpfc_rport_show_function'
 drivers/scsi/lpfc/lpfc_attr.c:7081: warning: Excess function parameter 'cdev' description in 'lpfc_rport_show_function'
 drivers/scsi/lpfc/lpfc_attr.c:7081: warning: Excess function parameter 'buf' description in 'lpfc_rport_show_function'

Link: https://lore.kernel.org/r/20201102142359.561122-5-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/lpfc/lpfc_scsi.c:331: warning: Function parameter or member 'num_to_alloc' not described in 'lpfc_new_scsi_buf_s3'
 drivers/scsi/lpfc/lpfc_scsi.c:331: warning: Excess function parameter 'num_to_allocate' description in 'lpfc_new_scsi_buf_s3'
 drivers/scsi/lpfc/lpfc_scsi.c:507: warning: Function parameter or member 'idx' not described in 'lpfc_sli4_io_xri_aborted'
 drivers/scsi/lpfc/lpfc_scsi.c:593: warning: Function parameter or member 'ndlp' not described in 'lpfc_get_scsi_buf_s3'
 drivers/scsi/lpfc/lpfc_scsi.c:593: warning: Function parameter or member 'cmnd' not described in 'lpfc_get_scsi_buf_s3'
 drivers/scsi/lpfc/lpfc_scsi.c:632: warning: Function parameter or member 'ndlp' not described in 'lpfc_get_scsi_buf_s4'
 drivers/scsi/lpfc/lpfc_scsi.c:632: warning: Function parameter or member 'cmnd' not described in 'lpfc_get_scsi_buf_s4'
 drivers/scsi/lpfc/lpfc_scsi.c:744: warning: Function parameter or member 'ndlp' not described in 'lpfc_get_scsi_buf'
 drivers/scsi/lpfc/lpfc_scsi.c:744: warning: Function parameter or member 'cmnd' not described in 'lpfc_get_scsi_buf'
 drivers/scsi/lpfc/lpfc_scsi.c:986: warning: Function parameter or member 'new_guard' not described in 'lpfc_bg_err_inject'
 drivers/scsi/lpfc/lpfc_scsi.c:1393: warning: Function parameter or member 'txop' not described in 'lpfc_sc_to_bg_opcodes'
 drivers/scsi/lpfc/lpfc_scsi.c:1393: warning: Function parameter or member 'rxop' not described in 'lpfc_sc_to_bg_opcodes'
 drivers/scsi/lpfc/lpfc_scsi.c:1393: warning: Excess function parameter 'txopt' description in 'lpfc_sc_to_bg_opcodes'
 drivers/scsi/lpfc/lpfc_scsi.c:1393: warning: Excess function parameter 'rxopt' description in 'lpfc_sc_to_bg_opcodes'
 drivers/scsi/lpfc/lpfc_scsi.c:1473: warning: Function parameter or member 'txop' not described in 'lpfc_bg_err_opcodes'
 drivers/scsi/lpfc/lpfc_scsi.c:1473: warning: Function parameter or member 'rxop' not described in 'lpfc_bg_err_opcodes'
 drivers/scsi/lpfc/lpfc_scsi.c:1473: warning: Excess function parameter 'txopt' description in 'lpfc_bg_err_opcodes'
 drivers/scsi/lpfc/lpfc_scsi.c:1473: warning: Excess function parameter 'rxopt' description in 'lpfc_bg_err_opcodes'
 drivers/scsi/lpfc/lpfc_scsi.c:1565: warning: Function parameter or member 'datasegcnt' not described in 'lpfc_bg_setup_bpl'
 drivers/scsi/lpfc/lpfc_scsi.c:1565: warning: Excess function parameter 'datacnt' description in 'lpfc_bg_setup_bpl'
 drivers/scsi/lpfc/lpfc_scsi.c:1951: warning: Function parameter or member 'datasegcnt' not described in 'lpfc_bg_setup_sgl'
 drivers/scsi/lpfc/lpfc_scsi.c:1951: warning: Function parameter or member 'lpfc_cmd' not described in 'lpfc_bg_setup_sgl'
 drivers/scsi/lpfc/lpfc_scsi.c:1951: warning: Excess function parameter 'datacnt' description in 'lpfc_bg_setup_sgl'
 drivers/scsi/lpfc/lpfc_scsi.c:2131: warning: Function parameter or member 'lpfc_cmd' not described in 'lpfc_bg_setup_sgl_prot'
 drivers/scsi/lpfc/lpfc_scsi.c:4476: warning: Function parameter or member 't' not described in 'lpfc_poll_timeout'
 drivers/scsi/lpfc/lpfc_scsi.c:4476: warning: Excess function parameter 'ptr' description in 'lpfc_poll_timeout'
 drivers/scsi/lpfc/lpfc_scsi.c:4503: warning: Function parameter or member 'shost' not described in 'lpfc_queuecommand'
 drivers/scsi/lpfc/lpfc_scsi.c:4503: warning: Excess function parameter 'done' description in 'lpfc_queuecommand'
 drivers/scsi/lpfc/lpfc_scsi.c:5035: warning: Function parameter or member 'cmnd' not described in 'lpfc_send_taskmgmt'
 drivers/scsi/lpfc/lpfc_scsi.c:5035: warning: Excess function parameter 'rdata' description in 'lpfc_send_taskmgmt'
 drivers/scsi/lpfc/lpfc_scsi.c:5688: warning: Function parameter or member 'phba' not described in 'lpfc_create_device_data'
 drivers/scsi/lpfc/lpfc_scsi.c:5688: warning: Function parameter or member 'pri' not described in 'lpfc_create_device_data'
 drivers/scsi/lpfc/lpfc_scsi.c:5688: warning: Excess function parameter 'pha' description in 'lpfc_create_device_data'
 drivers/scsi/lpfc/lpfc_scsi.c:5730: warning: Function parameter or member 'phba' not described in 'lpfc_delete_device_data'
 drivers/scsi/lpfc/lpfc_scsi.c:5730: warning: Excess function parameter 'pha' description in 'lpfc_delete_device_data'
 drivers/scsi/lpfc/lpfc_scsi.c:5762: warning: Function parameter or member 'phba' not described in '__lpfc_get_device_data'
 drivers/scsi/lpfc/lpfc_scsi.c:5762: warning: Excess function parameter 'pha' description in '__lpfc_get_device_data'
 drivers/scsi/lpfc/lpfc_scsi.c:5818: warning: Function parameter or member 'phba' not described in 'lpfc_find_next_oas_lun'
 drivers/scsi/lpfc/lpfc_scsi.c:5818: warning: Function parameter or member 'found_lun_pri' not described in 'lpfc_find_next_oas_lun'
 drivers/scsi/lpfc/lpfc_scsi.c:5818: warning: Excess function parameter 'pha' description in 'lpfc_find_next_oas_lun'
 drivers/scsi/lpfc/lpfc_scsi.c:5909: warning: Function parameter or member 'phba' not described in 'lpfc_enable_oas_lun'
 drivers/scsi/lpfc/lpfc_scsi.c:5909: warning: Function parameter or member 'pri' not described in 'lpfc_enable_oas_lun'
 drivers/scsi/lpfc/lpfc_scsi.c:5909: warning: Excess function parameter 'pha' description in 'lpfc_enable_oas_lun'
 drivers/scsi/lpfc/lpfc_scsi.c:5968: warning: Function parameter or member 'phba' not described in 'lpfc_disable_oas_lun'
 drivers/scsi/lpfc/lpfc_scsi.c:5968: warning: Function parameter or member 'pri' not described in 'lpfc_disable_oas_lun'
 drivers/scsi/lpfc/lpfc_scsi.c:5968: warning: Excess function parameter 'pha' description in 'lpfc_disable_oas_lun'

Link: https://lore.kernel.org/r/20201102142359.561122-4-lee.jones@linaro.org
Cc: James Smart <james.smart@broadcom.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/mpt3sas/mpt3sas_scsih.c:2778: warning: Function parameter or member 'ioc' not described in 'scsih_tm_cmd_map_status'
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:2778: warning: Function parameter or member 'channel' not described in 'scsih_tm_cmd_map_status'
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:2829: warning: Function parameter or member 'ioc' not described in 'scsih_tm_post_processing'
 drivers/scsi/mpt3sas/mpt3sas_scsih.c:2829: warning: Function parameter or member 'channel' not described in 'scsih_tm_post_processing'

Link: https://lore.kernel.org/r/20201102142359.561122-3-lee.jones@linaro.org
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: MPT-FusionLinux.pdl@avagotech.com
Cc: MPT-FusionLinux.pdl@broadcom.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/aic7xxx/aic79xx_osm.c: In function ‘ahd_linux_queue_abort_cmd’:
 drivers/scsi/aic7xxx/aic79xx_osm.c:2143:9: warning: variable ‘saved_scsiid’ set but not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20201102142359.561122-2-lee.jones@linaro.org
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This string is not NUL terminated.

Fixes the following W=1 kernel build warning(s):

 from drivers/scsi/pm8001/pm8001_sas.c:41:
 In function ‘strncpy’,
 inlined from ‘pm8001_issue_ssp_tmf’ at drivers/scsi/pm8001/pm8001_sas.c:919:2:
 include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ specified bound 8 equals destination size [-Wstringop-truncation]
 297 | #define __underlying_strncpy __builtin_strncpy
 | ^
 include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
 307 | return __underlying_strncpy(p, q, size);
 | ^~~~~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20201102102544.1018706-2-lee.jones@linaro.org
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

SCSI strings like inqdata are not NUL terminated.

Fixes the following W=1 kernel build warning(s):

 In file included from include/linux/bitmap.h:9,
 from include/linux/nodemask.h:95,
 from include/linux/mmzone.h:17,
 from include/linux/gfp.h:6,
 from include/linux/umh.h:4,
 from include/linux/kmod.h:9,
 from include/linux/module.h:16,
 from drivers/scsi/arcmsr/arcmsr_hba.c:47:
 In function ‘strncpy’,
 inlined from ‘arcmsr_handle_virtual_command’ at drivers/scsi/arcmsr/arcmsr_hba.c:3055:3:
 include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output truncated before terminating nul copying 4 bytes from a string of the same length [-Wstringop-truncation]
 297 | #define __underlying_strncpy __builtin_strncpy
 | ^
 include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
 307 | return __underlying_strncpy(p, q, size);
 | ^~~~~~~~~~~~~~~~~~~~
 In function ‘strncpy’,
 inlined from ‘arcmsr_handle_virtual_command’ at drivers/scsi/arcmsr/arcmsr_hba.c:3053:3:
 include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output truncated before terminating nul copying 16 bytes from a string of the same length [-Wstringop-truncation]
 297 | #define __underlying_strncpy __builtin_strncpy
 | ^
 include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
 307 | return __underlying_strncpy(p, q, size);
 | ^~~~~~~~~~~~~~~~~~~~
 In function ‘strncpy’,
 inlined from ‘arcmsr_handle_virtual_command’ at drivers/scsi/arcmsr/arcmsr_hba.c:3051:3:
 include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output truncated before terminating nul copying 8 bytes from a string of the same length [-Wstringop-truncation]
 297 | #define __underlying_strncpy __builtin_strncpy
 | ^
 include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
 307 | return __underlying_strncpy(p, q, size);
 | ^~~~~~~~~~~~~~~~~~~~

Link: https://lore.kernel.org/r/20201102102544.1018706-1-lee.jones@linaro.org
Cc: support@areca.com.tw
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

It is simpler for drivers to provide a ->device_reset() callback
irrespective of whether the GPIO, or firmware interface necessary to do the
reset, is discovered during probe.

Change ->device_reset() to return an error code.  Drivers that provide the
callback, but do not do the reset operation should return -EOPNOTSUPP.

Link: https://lore.kernel.org/r/20201103141403.2142-3-adrian.hunter@intel.comReviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean huo <beanhuo@micron.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

DeepSleep is a UFS v3.1 feature that achieves the lowest power consumption
of the device, apart from power off.

In DeepSleep mode, no commands are accepted, and the only way to exit is
using a hardware reset or power cycle.

This patch assumes that if a power cycle was an option, then power off
would be preferable, so only exit via a hardware reset is supported.

Drivers that wish to support DeepSleep need to set a new capability flag
UFSHCD_CAP_DEEPSLEEP and provide a hardware reset via the existing
 ->device_reset() callback.

It is assumed that UFS devices with wspecversion >= 0x310 support
DeepSleep.

[mkp: dropped sysfs ABI doc due to conflicts]

Link: https://lore.kernel.org/r/20201103141403.2142-2-adrian.hunter@intel.comReviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

A use-after-free or null-pointer error occurs when the 251-byte response
data is copied from IOMB buffer to response message buffer in function
pm8001_mpi_get_nvmd_resp().

After sending the command get_nvmd_data(), the caller begins to sleep by
calling wait_for_complete() and waits for the wake-up from calling
complete() in pm8001_mpi_get_nvmd_resp(). Due to unexpected events (e.g.,
interrupt), if response buffer gets freed before memcpy(), a use-after-free
error will occur. To fix this, the complete() should be called after
memcpy().

Link: https://lore.kernel.org/r/20201102165528.26510-5-Viswas.G@microchip.com.comAcked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: yuuzheng <yuuzheng@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In function check_fw_ready() we busy wait using udelay. The CPU is not
released and we see need_resched failures.

Busy waiting is not necessary since we are in process context and we can
sleep instead. Replace udelay with msleep of 20 ms intervals while waiting
for firmware to become ready.

It has been verified that check_fw_ready is not being used in interrupt
context anywhere, hence it is safe to make this change.

Link: https://lore.kernel.org/r/20201102165528.26510-4-Viswas.G@microchip.com.comAcked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: akshatzen <akshatzen@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Incorrect value of the running_req was causing the driver unload to be
stuck during the SAS lldd_dev_gone notification handling.  During SATA I/O
completion, for some error status values, the driver schedules the event
handler and running_req is decremented from that.  However, there are some
other error status values (like IO_DS_IN_RECOVERY,
IO_XFER_ERR_LAST_PIO_DATAIN_CRC_ERR) where the I/O has already been
completed by fw/driver so running_req is not decremented.

Also during NCQ error handling, driver itself will initiate READ_LOG_EXT
and ABORT_ALL. When libsas/libata initiate READ_LOG_EXT (0x2F), driver
increments running_req. This will be completed by the driver in
pm80xx_chip_sata_req(), but running_req was not decremented.

Link: https://lore.kernel.org/r/20201102165528.26510-3-Viswas.G@microchip.com.comAcked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Driver submits all internal requests (like abort_task, event acknowledgment
etc.) through inbound queue 0. While submitting those, driver does not
acquire any lock and this may lead to a race when there is an I/O request
coming in on CPU0 and submitted through inbound queue 0.  To avoid this,
lock acquisition has been moved to pm8001_mpi_build_cmd().  All command
submission will go through this path.

Link: https://lore.kernel.org/r/20201102165528.26510-2-Viswas.G@microchip.com.comAcked-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: peter chang <dpf@google.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com>
Signed-off-by: Radha Ramachandran <radha@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Make can_queue, nr_hw_queues and cmd_per_lun settable by the user instead
of hard coding them.

Link: https://lore.kernel.org/r/1604257174-4524-9-git-send-email-michael.christie@oracle.comReviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Do a state_list/execute_task_lock per CPU, so we can do submissions from
different CPUs without contention with each other.

Note: tcm_fc was passing TARGET_SCF_USE_CPUID, but never set cpuid.  The
assumption is that it wanted to set the cpuid to the CPU it was submitting
from so it will get this behavior with this patch.

[mkp: s/printk/pr_err/ + resolve COMPARE AND WRITE patch conflict]

Link: https://lore.kernel.org/r/1604257174-4524-8-git-send-email-michael.christie@oracle.comReviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Drop the sess_cmd_lock by:

 - Removing the sess_cmd_list use from LIO core, because it's been
   moved to qla2xxx.

 - Removing sess_tearing_down check in the I/O path. Instead of using that
   bit and the sess_cmd_lock, we rely on the cmd_count percpu ref. To do
   this we switch to percpu_ref_kill_and_confirm/percpu_ref_tryget_live.

Link: https://lore.kernel.org/r/1604257174-4524-7-git-send-email-michael.christie@oracle.comReviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Except for debug output in the shutdown path, tcm_qla2xxx is the only
driver using the se_session sess_cmd_list. Move the list to that driver to
facilitate removing the sess_cmd_lock from the main I/O path for the rest
of the drivers.

Link: https://lore.kernel.org/r/1604257174-4524-6-git-send-email-michael.christie@oracle.com
Cc: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

TARGET_SCF_LOOKUP_LUN_FROM_TAG is no longer used so remove it.

Link: https://lore.kernel.org/r/1604257174-4524-5-git-send-email-michael.christie@oracle.comReviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Only the __qlt_24xx_handle_abts() code path does not know the LUN for an
abort and it uses the TARGET_SCF_LOOKUP_LUN_FROM_TAG flag to have LIO core
look it up. LIO uses target_lookup_lun_from_tag to go from cmd tag to LUN
for the driver. However, qla2xxx has a tcm_qla2xxx_find_cmd_by_tag() which
does almost the same thing as the LIO helper (it finds the cmd but does not
return the LUN). This patch has qla2xxx use its internal helper.

Link: https://lore.kernel.org/r/1604257174-4524-4-git-send-email-michael.christie@oracle.com
Cc: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

percpu_ref_init sets the refcount to 1 and percpu_ref_kill drops it.
Drivers like iSCSI and loop do not call target_sess_cmd_list_set_waiting
during session shutdown, though, so they have been calling percpu_ref_exit
with a refcount still taken and leaking the cmd_counts memory.

Link: https://lore.kernel.org/r/1604257174-4524-3-git-send-email-michael.christie@oracle.comReviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix two bugs in the LUN refcounting:

 1. For the TCM_WRITE_PROTECTED case we were returning an error after
    taking a ref to the LUN, but never dropping it (caller just send status
    and drops cmd ref).

 2. We still need to do a percpu_ref_tryget_live for the virt LUN 0 like we
    do for other LUNs, because the TPG code does the refcount/wait process
    like it does with other LUNs.

Link: https://lore.kernel.org/r/1604257174-4524-2-git-send-email-michael.christie@oracle.comReviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

A semicolon is not needed after a switch statement.

Link: https://lore.kernel.org/r/20201101144017.2284047-1-trix@redhat.comSigned-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

A semicolon is not needed after a switch statement.

Link: https://lore.kernel.org/r/20201101143812.2283642-1-trix@redhat.comReviewed-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

SBC-4 r15 5.3 COMPARE AND WRITE command states:
  if the compare operation does not indicate a match, then terminate the
  command with CHECK CONDITION status with the sense key set to
  MISCOMPARE and the additional sense code set to MISCOMPARE DURING
  VERIFY OPERATION. In the sense data (see 4.18 and SPC-5) the offset
  from the start of the Data-Out Buffer to the first byte of data that
  was not equal shall be reported in the INFORMATION field.

This change implements the missing logic to report the miscompare offset in
the sense data INFORMATION field. As an optimization, byte-by-byte
miscompare offset calculation is only performed after memcmp() mismatch.

Link: https://lore.kernel.org/r/20201031233211.5207-5-ddiss@suse.deSigned-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In preparation for finding and returning the miscompare offset.

Link: https://lore.kernel.org/r/20201031233211.5207-4-ddiss@suse.deReviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

cmd.bad_sector currently gets packed into the sense INFORMATION field for
TCM_LOGICAL_BLOCK_{GUARD,APP_TAG,REF_TAG}_CHECK_FAILED errors, which carry
an .add_sector_info flag in the sense_detail_table to ensure this.

In preparation for propagating a byte offset on COMPARE AND WRITE
TCM_MISCOMPARE_VERIFY error, rename cmd.bad_sector to cmd.sense_info and
sense_detail.add_sector_info to sense_detail.add_sense_info so that it
better reflects the sense INFORMATION field destination.

[ddiss: update previously overlooked ib_isert]

Link: https://lore.kernel.org/r/20201031233211.5207-3-ddiss@suse.deReviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This helps distinguish it from the SCSI sense INFORMATION field.

Link: https://lore.kernel.org/r/20201031233211.5207-2-ddiss@suse.deReviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

There have been several attempts to fix serious problems in the compat
handling in megasas_mgmt_compat_ioctl_fw(), and it also uses the
compat_alloc_user_space() function.

Folding the compat handling into the regular ioctl function with
in_compat_syscall() simplifies it a lot and avoids some of the remaining
problems:

 - missing handling of unaligned pointers

 - overflowing the ioc->frame.raw array from invalid input

 - compat_alloc_user_space()

Link: https://lore.kernel.org/r/20201030164450.1253641-3-arnd@kernel.orgReviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

It sounds unwise to let user space pass an unchecked 32-bit offset into a
kernel structure in an ioctl. This is an unsigned variable, so checking the
upper bound for the size of the structure it points into is sufficient to
avoid data corruption, but as the pointer might also be unaligned, it has
to be written carefully as well.

While I stumbled over this problem by reading the code, I did not continue
checking the function for further problems like it.

Link: https://lore.kernel.org/r/20201030164450.1253641-2-arnd@kernel.org
Fixes: c4a3e0a5 ("[SCSI] MegaRAID SAS RAID: new driver")
Cc: <stable@vger.kernel.org> # v2.6.15+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The use of compat_alloc_user_space() can be easily replaced by handling
compat arguments in the regular handler, and this will make it work for
big-endian kernels as well, which at the moment get an invalid indirect
pointer argument.

Calling aac_ioctl() instead of aac_compat_do_ioctl() means the compat and
native code paths behave the same way again, which they stopped when the
adapter health check was added only in the native function.

Link: https://lore.kernel.org/r/20201030164450.1253641-1-arnd@kernel.org
Fixes: 572ee53a ("scsi: aacraid: check adapter health")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Bump mpt3sas driver version to 35.101.00.00

Link: https://lore.kernel.org/r/20201027130847.9962-15-sreekanth.reddy@broadcom.comSigned-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add module parameter multipath_on_hba to enable/disable multi-port path
topology support.  By default this feature is enabled on SAS3.5 HBA device
and disabled on SAS3 &SAS2.5 HBA devices.

When this feature is disabled then driver uses a default
PhysicalPort(PortID) number i.e. 255 instead of the PhysicalPort number
provided by HBA firmware.

Link: https://lore.kernel.org/r/20201027130847.9962-14-sreekanth.reddy@broadcom.comSigned-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

During HBA reset the Port ID of vSES device may change. As a result, it is
necessary to refresh virtual_phy objects after reset.

Each Port's vphy_list table needs to be updated after updating the
HBA port table. The algorithm is as follows:

 - Loop over each port entry from HBA port table
   * Loop over each virtual phy entry from port's vphys_list table
     - Mark virtual phy entry as dirty by setting dirty bit in virtual phy
       entry's flags field
 - Read SASIOUnitPage0 page
 - Loop over each HBA Phy's Phy data from SASIOUnitPage0
    * If phy's remote attached device is not SES device then continue with
      processing next HBA Phy's Phy data;
    * Read SASPhyPage0 data for this Phy number and determine whether
      current phy is a virtual phy or not. If it is not a virtual phy then
      continue with next Phy data;
    * Get the current phy's remote attached vSES device's SAS Address;
    * Loop over each port entry from HBA port table
      - If Port's vphys_mask field is zero then continue with
        next Port entry,
      - Loop over each virtual phy entry from Port's vphy_list table
      - If the current phy's remote SAS Address is different from
        virtual phy entry's SAS Address then continue with next
        virtual phy entry,
      - Set bit corresponding to current phy number in virtual phy
        entry's phy_mask field,
      - Get the HBA port table's Port entry corresponding to
        Phy data's 'Port' value,
        * If there is no Port entry corresponding to Phy data's
	 'Port' value in HBA port table then create a new port entry
	 and add it to HBA port table.
      - If this retrieved Port entry is the same as the current Port
        entry then don't do anything, just clear the dirty bit from
        virtual phy entry's flag field and continue with processing
        next HBA Phy's Phy data.
      - If this retrieved Port entry is different from the current Port
        entry then move the current virtual phy entry from current Port's
        vphys_list to retrieved Port entry's vphys_list.
        * Clear current phy bit in current Port entry's vphys_mask and
          set the current phy bit in the retrieved Port entry's
          vphys_mask field.
        * Clear the dirty bit from virtual phy entry's flag field and
          continue with next HBA Phy's Phy data.
 - Delete the 'virtual phy' entries and HBA's 'Port table' entries which
   are still marked as 'dirty'.

Link: https://lore.kernel.org/r/20201027130847.9962-13-sreekanth.reddy@broadcom.comSigned-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>