Pull USB patches from Greg KH:
 "Here's the big USB pull request for 3.15-rc1.

  The normal set of patches, lots of controller driver updates, and a
  smattering of individual USB driver updates as well.

  All have been in linux-next for a while"

* tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (249 commits)
  xhci: Transition maintainership to Mathias Nyman.
  USB: disable reset-resume when USB_QUIRK_RESET is set
  USB: unbind all interfaces before rebinding any
  usb: phy: Add ulpi IDs for SMSC USB3320 and TI TUSB1210
  usb: gadget: tcm_usb_gadget: stop format strings
  usb: gadget: f_fs: add missing spinlock and mutex unlock
  usb: gadget: composite: switch over to ERR_CAST()
  usb: gadget: inode: switch over to memdup_user()
  usb: gadget: f_subset: switch over to PTR_RET
  usb: gadget: lpc32xx_udc: fix wrong clk_put() sequence
  USB: keyspan: remove dead debugging code
  USB: serial: add missing newlines to dev_<level> messages.
  USB: serial: add missing braces
  USB: serial: continue to write on errors
  USB: serial: continue to read on errors
  USB: serial: make bulk_out_size a lower limit
  USB: cypress_m8: fix potential scheduling while atomic
  devicetree: bindings: document lsi,zevio-usb
  usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs
  usb: chipidea: imx: Use dev_name() for ci_hdrc name to distinguish USBs
  ...

Pull tty/serial driver update from Greg KH:
 "Here's the big tty/serial driver update for 3.15-rc1.

  Nothing major, a number of serial driver updates and a few tty core
  fixes as well.

  All have been in linux-next for a while"

* tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits)
  tty/serial: omap: empty the RX FIFO at the end of half-duplex TX
  tty/serial: omap: fix RX interrupt enable/disable in half-duplex TX
  serial: sh-sci: Neaten dev_<level> uses
  serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFF
  serial: sh-sci: Add more register documentation
  serial: sh-sci: Remove useless casts
  serial: sh-sci: Replace printk() by pr_*()
  serial_core: Avoid NULL pointer dereference in uart_close()
  serial_core: Get a reference for port->tty in uart_remove_one_port()
  serial: clps711x: Give a chance to perform useful tasks during wait loop
  serial_core: Grammar s/ports/port's/
  serial_core: Spelling s/contro/control/
  serial: efm32: properly namespace location property
  serial: max310x: Add missing #include <linux/uaccess.h>
  synclink: fix info leak in ioctl
  serial: 8250: Clean up the locking for -rt
  serial: 8250_pci: change BayTrail default uartclk
  serial: 8250_pci: more BayTrail error-free bauds
  serial: sh-sci: Add missing call to uart_remove_one_port() in failure path
  serial_core: Unregister console in uart_remove_one_port()
  ...

Pull staging driver updates from Greg KH:
 "Here's the huge drivers/staging/ update for 3.15-rc1.

  Loads of cleanup fixes, a few drivers removed, and some new ones
  added.

  All have been in linux-next for a while"

* tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1375 commits)
  staging: xillybus: XILLYBUS_PCIE depends on PCI_MSI
  staging: xillybus: Added "select CRC32" for XILLYBUS in Kconfig
  staging: comedi: poc: remove obsolete driver
  staging: unisys: replace kzalloc/kfree with UISMALLOC/UISFREE
  staging: octeon-usb: prevent memory corruption
  staging: usbip: fix line over 80 characters
  staging: usbip: fix quoted string split across lines
  Staging: unisys: Remove RETINT macro
  Staging: unisys: Remove FAIL macro
  Staging: unisys: Remove RETVOID macro
  Staging: unisys: Remove RETPTR macro
  Staging: unisys: Remove RETBOOL macro
  Staging: unisys: Remove FAIL_WPOSTCODE_1 macro
  Staging: unisys: Cleanup macros to get rid of goto statements
  Staging: unisys: include: Remove unused macros from timskmod.h
  staging: dgap: fix the rest of the checkpatch warnings in dgap.c
  Staging: bcm: Remove unnecessary parentheses
  staging: wlags49_h2: Delete unnecessary braces
  staging: wlags49_h2: Do not use assignment in if condition
  staging: wlags49_h2: Enclose macro in a do-while loop
  ...

Merge tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and sysfs updates from Greg KH:
 "Here's the big driver core / sysfs update for 3.15-rc1.

  Lots of kernfs updates to make it useful for other subsystems, and a
  few other tiny driver core patches.

  All have been in linux-next for a while"

* tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (42 commits)
  Revert "sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()"
  kernfs: cache atomic_write_len in kernfs_open_file
  numa: fix NULL pointer access and memory leak in unregister_one_node()
  Revert "driver core: synchronize device shutdown"
  kernfs: fix off by one error.
  kernfs: remove duplicate dir.c at the top dir
  x86: align x86 arch with generic CPU modalias handling
  cpu: add generic support for CPU feature based module autoloading
  sysfs: create bin_attributes under the requested group
  driver core: unexport static function create_syslog_header
  firmware: use power efficient workqueue for unloading and aborting fw load
  firmware: give a protection when map page failed
  firmware: google memconsole driver fixes
  firmware: fix google/gsmi duplicate efivars_sysfs_init()
  drivers/base: delete non-required instances of include <linux/init.h>
  kernfs: fix kernfs_node_from_dentry()
  ACPI / platform: drop redundant ACPI_HANDLE check
  kernfs: fix hash calculation in kernfs_rename_ns()
  kernfs: add CONFIG_KERNFS
  sysfs, kobject: add sysfs wrapper for kernfs_enable_ns()
  ...

Pull char/misc driver patches from Greg KH:
 "Here's the big char/misc driver updates for 3.15-rc1.

  Lots of various things here, including the new mcb driver subsystem.

  All of these have been in linux-next for a while"

* tag 'char-misc-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (118 commits)
  extcon: Move OF helper function to extcon core and change function name
  extcon: of: Remove unnecessary function call by using the name of device_node
  extcon: gpio: Use SIMPLE_DEV_PM_OPS macro
  extcon: palmas: Use SIMPLE_DEV_PM_OPS macro
  mei: don't use deprecated DEFINE_PCI_DEVICE_TABLE macro
  mei: amthif: fix checkpatch error
  mei: client.h fix checkpatch errors
  mei: use cl_dbg where appropriate
  mei: fix Unnecessary space after function pointer name
  mei: report consistently copy_from/to_user failures
  mei: drop pr_fmt macros
  mei: make me hw headers private to me hw.
  mei: fix memory leak of pending write cb objects
  mei: me: do not reset when less than expected data is received
  drivers: mcb: Fix build error discovered by 0-day bot
  cs5535-mfgpt: Simplify dependencies
  spmi: pm: drop bus-level PM suspend/resume routines
  spmi: pmic_arb: make selectable on ARCH_QCOM
  Drivers: hv: vmbus: Increase the limit on the number of pfns we can handle
  pch_phub: Report error writing MAC back to user
  ...

Pull sound updates from Takashi Iwai:
 "There have been lots of changes in ALSA core, HD-audio and ASoC, also
  most of PCI drivers touched by conversions of printks.  All these
  resulted in a high volume and wide ranged patch sets in this release.
  Many changes are fairly trivial, but also lots of nice cleanups and
  refactors.  There are a few new drivers, most notably, the Intel
  Haswell and Baytrail ASoC driver.

  Core changes:
   - A bit modernization; embed the device struct into snd_card struct,
     so that it may be referred from the beginning.  A new
     snd_card_new() function is introduced for that, and all drivers
     have been converted.

   - Simplification in the device management code in ALSA core; now
     managed by a simple priority list instead

   - Converted many kernel messages to use the standard dev_err() & co;
     this would be the pretty visible difference, especially for
     HD-audio.

  HD-audio:
   - Conexant codecs use the auto-parser as default now; the old static
     code still remains in case of regressions.  Some old quirks have
     been rewritten with the fixups for auto-parser.

   - C-Media codecs also use the auto-parser as default now, too.

   - A device struct is assigned to each HD-audio codec, and the
     formerly hwdep attributes are accessible over the codec sysfs, too.
     hwdep attributes still remain for compatibility.

   - Split the PCI-specific stuff for HD-audio controller into a
     separate module, ane make a helper module for the generic
     controller driver.  This is a preliminary change for supporting
     Tegra HDMI controller in near future, which slipped from 3.15
     merge.

   - Device-specific fixes: mute LED support for Lenovo Ideapad, mic LED
     fix for HP laptops, more ASUS subwoofer quirks, yet more Dell
     laptop headset quirks

   - Make the HD-audio codec response a bit more robust

   - A few improvements on Realtek ALC282 / 283 about the pop noises

   - A couple of Intel HDMI fixes

  ASoC:
   - Lots of cleanups for enumerations; refactored lots of error prone
     original codes to use more modern APIs

   - Elimination of the ASoC level wrappers for I2C and SPI moving us
     closer to converting to regmap completely and avoiding some
     randconfig hassle

   - Provide both manually and transparently locked DAPM APIs rather
     than a mix of the two fixing some concurrency issues

   - Start converting CODEC drivers to use separate bus interface
     drivers rather than having them all in one file helping avoid
     dependency issues

   - DPCM support for Intel Haswell and Bay Trail platforms, lots of
     fixes

   - Lots of work on improvements for simple-card, DaVinci and the
     Renesas rcar drivers.

   - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of
     the CSR SiRF SoC, TLV320AIC31XXX, Armada 370 DB, Cirrus cs42xx8

   - Fixes for the simple-card DAI format DT mess

   - DT support for a couple more devices.

   - Use of the tdm_slot mapping in a few drivers

  Others:
   - Support of reset_resume callback for improved S4 in USB-audio
     driver; the device with boot quirks have been little tested, which
     we need to watch out in this development cycle

   - Add PM support for ICE1712 driver (finally!); it's still pretty
     partial support, only for M-Audio devices"

* tag 'sound-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (610 commits)
  ALSA: ice1712: Add suspend support for M-Audio ICE1712-based cards
  ALSA: ice1712: add suspend support for ICE1712 chip
  ALSA: hda - Enable beep for ASUS 1015E
  ALSA: asihpi: fix some indenting in snd_card_asihpi_pcm_new()
  ALSA: hda - add headset mic detect quirks for three Dell laptops
  ASoC: tegra: move AC97 clock handling to the machine driver
  ASoC: simple-card: Handle many DAI links
  ASoC: simple-card: Add DT documentation for multi-DAI links
  ASoC: simple-card: dynamically allocate the DAI link and properties
  ASoC: imx-ssi: Add .xlate_tdm_slot_mask() support.
  ASoC: fsl-esai: Add .xlate_tdm_slot_mask() support.
  ASoC: fsl-utils: Add fsl_asoc_xlate_tdm_slot_mask() support.
  ASoC: core: remove the 'of_' prefix of of_xlate_tdm_slot_mask.
  ASoC: rcar: subnode tidyup for renesas,rsnd.txt
  ASoC: Remove name_prefix unset during DAI link init hack
  ALSA: hda - Inform the unexpectedly ignored pins by auto-parser
  ASoC: rcar: bugfix: it cares about the non-src case
  ARM: bockw: fixup SND_SOC_DAIFMT_CBx_CFx flags
  ASoC: pcm: Drop incorrect double/extra frees
  ASoC: mfld_machine: Fix compile error
  ...

Pull PCI changes from Bjorn Helgaas:
 "Enumeration
   - Increment max correctly in pci_scan_bridge() (Andreas Noever)
   - Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever)
   - Assign CardBus bus number only during the second pass (Andreas Noever)
   - Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever)
   - Make sure bus number resources stay within their parents bounds (Andreas Noever)
   - Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever)
   - Check for child busses which use more bus numbers than allocated (Andreas Noever)
   - Don't scan random busses in pci_scan_bridge() (Andreas Noever)
   - x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas)
   - x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas)
   - x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas)
   - x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas)
   - x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas)

  NUMA
   - x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas)
   - x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas)
   - x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas)
   - x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas)
   - x86: Remove acpi_get_pxm() usage (Bjorn Helgaas)
   - ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas)
   - ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas)
   - ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas)

  Resource management
   - i2o: Fix and refactor PCI space allocation (Bjorn Helgaas)
   - Add resource_contains() (Bjorn Helgaas)
   - Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas)
   - Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas)
   - Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas)
   - Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas)
   - Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas)
   - Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas)
   - Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas)
   - Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas)
   - alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas)
   - s390: Use generic pci_enable_resources() (Bjorn Helgaas)
   - Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas)
   - Set type in __request_region() (Bjorn Helgaas)
   - Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas)
   - Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas)
   - Log IDE resource quirk in dmesg (Bjorn Helgaas)
   - Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas)

  PCI device hotplug
   - Make check_link_active() non-static (Rajat Jain)
   - Use link change notifications for hot-plug and removal (Rajat Jain)
   - Enable link state change notifications (Rajat Jain)
   - Don't disable the link permanently during removal (Rajat Jain)
   - Don't check adapter or latch status while disabling (Rajat Jain)
   - Disable link notification across slot reset (Rajat Jain)
   - Ensure very fast hotplug events are also processed (Rajat Jain)
   - Add hotplug_lock to serialize hotplug events (Rajat Jain)
   - Remove a non-existent card, regardless of "surprise" capability (Rajat Jain)
   - Don't turn slot off when hot-added device already exists (Yijing Wang)

  MSI
   - Keep pci_enable_msi() documentation (Alexander Gordeev)
   - ahci: Fix broken single MSI fallback (Alexander Gordeev)
   - ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev)
   - Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman)
   - Fix leak of msi_attrs (Greg Kroah-Hartman)
   - Fix pci_msix_vec_count() htmldocs failure (Masanari Iida)

  Virtualization
   - Device-specific ACS support (Alex Williamson)

  Freescale i.MX6
   - Wait for retraining (Marek Vasut)

  Marvell MVEBU
   - Use Device ID and revision from underlying endpoint (Andrew Lunn)
   - Fix incorrect size for PCI aperture resources (Jason Gunthorpe)
   - Call request_resource() on the apertures (Jason Gunthorpe)
   - Fix potential issue in range parsing (Jean-Jacques Hiblot)

  Renesas R-Car
   - Check platform_get_irq() return code (Ben Dooks)
   - Add error interrupt handling (Ben Dooks)
   - Fix bridge logic configuration accesses (Ben Dooks)
   - Register each instance independently (Magnus Damm)
   - Break out window size handling (Magnus Damm)
   - Make the Kconfig dependencies more generic (Magnus Damm)

  Synopsys DesignWare
   - Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar)

  Miscellaneous
   - Remove unused SR-IOV VF Migration support (Bjorn Helgaas)
   - Enable INTx if BIOS left them disabled (Bjorn Helgaas)
   - Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter)
   - Clean up par-arch object file list (Liviu Dudau)
   - Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom)
   - ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang)
   - Fix pci_bus_b() build failure (Paul Gortmaker)"

* tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits)
  Revert "[PATCH] Insert GART region into resource map"
  PCI: Log IDE resource quirk in dmesg
  PCI: Change pci_bus_alloc_resource() type_mask to unsigned long
  PCI: Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region()
  resources: Set type in __request_region()
  PCI: Don't check resource_size() in pci_bus_alloc_resource()
  s390/PCI: Use generic pci_enable_resources()
  tile PCI RC: Use default pcibios_enable_device()
  sparc/PCI: Use default pcibios_enable_device() (Leon only)
  sh/PCI: Use default pcibios_enable_device()
  microblaze/PCI: Use default pcibios_enable_device()
  alpha/PCI: Use default pcibios_enable_device()
  PCI: Add "weak" generic pcibios_enable_device() implementation
  PCI: Don't enable decoding if BAR hasn't been assigned an address
  PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled
  PCI: Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit
  PCI: Don't try to claim IORESOURCE_UNSET resources
  PCI: Check IORESOURCE_UNSET before updating BAR
  PCI: Don't clear IORESOURCE_UNSET when updating BAR
  PCI: Mark resources as IORESOURCE_UNSET if we can't assign them
  ...

Conflicts:
	arch/x86/include/asm/topology.h
	drivers/ata/ahci.c

Pull EDAC updates from Borislav Petkov:
 "A bunch of EDAC updates all over the place:

   - Support for new AMD models, along with more graceful fallback for
     unsupported hw.

   - Bunch of fixes from SUSE accumulated from bug reports

   - Misc other fixes and cleanups"

* tag 'edac_for_3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Add support for newer F16h models
  i7core_edac: Drop unused variable
  i82875p_edac: Drop redundant call to pci_get_device()
  amd8111_edac: Fix leaks in probe error paths
  e752x_edac: Drop pvt->bridge_ck
  MCE, AMD: Fix decoding module loading on unsupported hw
  i5100_edac: Remove an unneeded condition in i5100_init_csrows()
  sb_edac: Degrade log level for device registration
  amd64_edac: Fix logic to determine channel for F15 M30h processors
  edac/85xx: Remove deprecated IRQF_DISABLED
  i3200_edac: Add a missing pci_disable_device() on the exit path
  i5400_edac: Disable device when unloading module
  e752x_edac: Simplify call to pci_get_device()

Pull hwmon updates from Guenter Roeck:
 - New drivers for ADC128D818, LTC2945, LTC4260, and LTC4222
 - Added support for LTM4676 to ltc2978 driver
 - Converted several drivers to use devm_hwmon_device_register_with_groups
 - Various cleanup in several drivers

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (36 commits)
  hwmon: (pmbus/ltc2978) Add support for LTM4676
  hwmon: (pmbus/ltc2978) Add new chip ID for LTC2974
  hwmon: Do not accept invalid name attributes
  hwmon: (max6639) Use SIMPLE_DEV_PM_OPS macro
  hwmon: (lm95245) Make temp2_crit_hyst read-only
  hwmon: (lm95245) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm95245) Drop useless debug message
  hwmon: (lm95245) Fix hysteresis temperatures
  hwmon: (max6639) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (max6639) Introduce local dev variable, and reduce noisiness
  hwmon: (max6650) Introduce local 'dev' variable
  hwmon: (max6650) Drop error message after memory allocation failures
  hwmon: (max6650) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (max6650) Rearrange code to no longer require forward declarations
  hwmon: (ltc4215) Convert to devm_hwmon_device_register_with_groups
  hwmon: (coretemp) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (coretemp) Allocate platform data with devm_kzalloc
  hwmon: (coretemp) Use sysfs_create_group to create sysfs attributes
  hwmon: (ltc4245) Remove devicetree conditionals
  hwmon: (ltc4245) Drop debug messages
  ...

Pull watchdog updates from Wim Van Sebroeck:
 "This patchset contains:
   - Various small clean-ups and fixes
   - boot logic hanegs for mpc8xxx_wdt
   - it87_wdt: Work around non-working CIR interrupts
   - iTCO_wdt: Fix the parent device
   - Kconfig dependencies
   - simplification of code with devm_ioremap_resource() or
     platform_driver_probe()
   - conversion of xilinx watchdog driver to Generic watchdog Framework
   - addition of extra functionality and devices for the xilinx watchdog
     driver
   - Addition of Tegra watchdog"

* git://www.linux-watchdog.org/linux-watchdog: (38 commits)
  watchdog: Fix Elan SC520 dependencies
  watchdog: ib700wdt: Use platform_driver_probe
  watchdog: geodewdt: Use platform_driver_probe
  watchdog: advantechwdt: Use platform_driver_probe
  watchdog: acquirewdt: Use platform_driver_probe
  watchdog: iTCO_wdt: Fix the parent device
  watchdog: it87_wdt: Work around non-working CIR interrupts
  watchdog: bcm281xx: Fix Kconfig dependency
  watchdog: s3c2410_wdt: Check return value of clk_prepare_enable
  watchdog: s3c2410_wdt: Remove unneeded initialization
  watchdog: sunxi: Change compatibles
  watchdog: orion: prepare new Dove DT Kconfig variable
  watchdog: fix checkpatch warnings and error
  watchdog: Add tegra watchdog
  watchdog: xilinx: Remove no_timeout variable
  watchdog: xilinx: Enable this driver for Zynq
  watchdog: xilinx: Add missing binding
  watchdog: xilinx: Use correct comment indentation
  watchdog: xilinx: Use of_property_read_u32
  watchdog: xilinx: Fix all printk messages
  ...

Pull spi Updates from Mark Brown:
 "A busy release for both cleanups and new drivers this time along with
  further factoring out of replicated code into the core:

   - Provide support in the core for DMA mapping transfers - essentially
     all drivers weren't implementing this properly, now there's no
     excuse.
   - Dual and quad mode support for spidev.
   - Fix handling of cs_change in the generic implementation.
   - Remove the S3C_DMA code from the s3c64xx driver now that all the
     platforms using it have been converted to dmaengine.
   - Lots of improvements to the Renesas SPI controllers.
   - Drivers for Allwinner A10 and A31, Qualcomm QUP and Xylinx xtfpga.
   - Removal of the bitrotted ti-ssp driver"

* tag 'spi-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (199 commits)
  spi: Fix handling of cs_change in core implementation
  spi: bitbang: Make spi_bitbang_stop() return void
  spi: mpc52xx: Convert to use bits_per_word_mask
  spi: omap-100k: Fix memory leak
  spi: dw: Don't call kfree for memory allocated by devm_kzalloc
  spi: fsl-dspi: Fix memory leak
  spi: omap-uwire: add missing iounmap
  spi: clps711x: Convert to use master->max_speed_hz
  spi: clps711x: Enable driver compilation with COMPILE_TEST
  spi: omap-uwire: Remove full duplex check
  spi: Do not require a completion
  spi: topcliff-pch: Transform noisy message to dev_vdbg
  spi: coldfire-qspi: Simplify the code to set register bits for transfer speed
  spi: bcm63xx: Remove unused define for PFX
  spi: efm32: use $vendor,$device scheme for compatible string
  spi: clps711x: Remove <mach/hardware.h> dependency
  spi: topcliff-pch: Properly unregister platform devices on probe() error paths
  spi: fsl-espi: Remove unused bits_per_word variable in fsl_espi_bufs
  spi: altera: Remove the code to get unused platform_data
  spi: fsl-lib: Fix memory leak of pinfo
  ...

Pull regulator updates from Mark Brown:
 "This release has lots and lots of small cleanups and fixes in the
  regulator subsystem, mainly cleaning up some bad patterns that got
  duplicated in DT code, but otherwise very little of note outside of
  the scope of the relevant drivers:

   - Support for configuration of the initial state for gpio regulators
     with multi-voltage support.
   - Support for calling regulator_set_voltage() on fixed regulators.
   - New drivers for Broadcom BCM590xx, Freescale pfuze200, Samsung
     S2MPA01 & S2MPS11/4, some PWM controlled regulators found on some
     ST boards and TI TPS65218"

* tag 'regulator-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (154 commits)
  regulator: aat2870: Use regulator_map_voltage_ascend
  regulator: st-pwm: Convert to get_voltage_sel
  regulator: Add new driver for ST's PWM controlled voltage regulators
  regulator: bcm590xx: Remove **rdev from struct bcm590xx_reg
  regulator: bcm590xx: Make the modalias matches the driver name
  regulator: s5m8767: Convert to use regulator_[enable|disable|is_enabled]_regmap
  regulator: db8500-prcmu: Set 1.8V as a fixed voltage for vsmps2
  regulator: s2mps11: Add missing of_node_put
  regulator: s2mps11: Use of_get_child_by_name
  Documentation: mfd: s2mps11: Document support for S2MPS14
  regulator: s2mps11: Add set_suspend_disable for S2MPS14
  regulator: s2mps11: Add support for S2MPS14 regulators
  regulator: max8660: Fix brace alignment
  regulator: dbx500: use seq_puts() instead of seq_printf()
  regulator: dbx500-prcmu: Silence checkpatch warnings
  regulator: anatop: Remove checking control_reg in [set|get]_voltage_sel
  regulator: max8952: Silence checkpatch warning
  regulator: max8925: Silence checkpatch warning
  regulator: max8660: Silence checkpatch warnings
  regulator: arizona-ldo1: Correct default regulator init_data
  ...

Pull regmap updates from Mark Brown:
 "Quite a busy release for regmap this time around, the standout changes
  are:

   - A real implementation of regmap_multi_write() and a bypassed
     version of it for use by drivers doing patch-like things with more
     open coding for surrounding startup sequences.
   - Support fast_io on bulk operations.
   - Support split device binding and map initialisation for use by
     devices required in early init (mainly system controllers).
   - Fixes for some operations on maps with strides set.
   - Export the value parsing operations to help generic code built on
     top of the API.
   - Support for MMIO regmaps with non-32 bit register sizes.

  plus a few smaller fixes"

* tag 'regmap-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (22 commits)
  regmap: mmio: Add regmap_mmio_regbits_check.
  regmap: mmio: Add support for 1/2/8 bytes wide register address.
  regmap: mmio: add regmap_mmio_{regsize, count}_check.
  regmap: cache: Don't attempt to sync non-writeable registers
  regmap: cache: Step by stride in default sync
  regmap: Fix possible sleep-in-atomic in regmap_bulk_write()
  regmap: Ensure regmap_register_patch() is compatible with fast_io
  regmap: irq: Set data pointer only on regmap_add_irq_chip success
  regmap: Implementation for regmap_multi_reg_write
  regmap: add regmap_parse_val api
  mfd: arizona: Use new regmap features for manual register patch
  regmap: Base regmap_register_patch on _regmap_multi_reg_write
  regmap: Add bypassed version of regmap_multi_reg_write
  regmap: Mark reg_defaults in regmap_multi_reg_write as const
  regmap: fix coccinelle warnings
  regmap: Check stride of register patch as we register it
  regmap: Clean up _regmap_update_bits()
  regmap: Separate regmap dev initialization
  regmap: Check readable regs in _regmap_read
  regmap: irq: Remove domain on exit
  ...

Pull pin control bulk changes from Linus Walleij:
 "Pin control bulk changes for the v3.15 series, no new core
  functionality this time, just incremental driver updates:

   - A large refactoring of the MVEBU (Marvell) driver.

   - A large refactoring of the Tegra (nVidia) driver.

   - GPIO interrupt including soft edges support in the STi driver.

   - Misc updates to PFC (Renesas), AT91, ADI2 (Blackfin),
     pinctrl-single, sirf (CSR), msm (Qualcomm), Exynos (Samsung), sunxi
     (AllWinner), i.MX (Freescale), Baytrail"

* tag 'pinctrl-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
  pinctrl: tegra: add some missing Tegra114 entries
  pinctrl: tegra: fix some mistakes in Tegra124
  pinctrl: msm: fix up out-of-order merge conflict
  pinctrl: st: Fix error check for of_irq_to_resource usage
  pinctrl: tegra: consistency cleanup
  pinctrl: tegra: dynamically calculate function list of groups
  pinctrl: tegra: init Tegra20/30 at module_init time
  pinctrl: st: Use ARRAY_SIZE instead of raw value for number of delays
  pinctrl: st: add pinctrl support for the STiH407 SoC
  pinctrl: st: Enhance the controller to manage unavailable registers
  pinctrl: msm: Simplify msm_config_reg() and callers
  pinctrl: msm: Remove impossible WARN_ON()s
  pinctrl: msm: Replace lookup tables with math
  pinctrl: msm: Drop OF_IRQ dependency
  pinctrl: msm: Drop unused includes
  pinctrl: msm: Check for ngpios > MAX_NR_GPIO
  pinctrl: msm: Silence recursive lockdep warning
  pinctrl: mvebu: silence WARN to dev_warn
  pinctrl: msm: drop wake_irqs bitmap
  pinctrl-baytrail: add function mux checking in gpio pin request
  ...

Pull ACPI and power management updates from Rafael Wysocki:
 "The majority of this material spent some time in linux-next, some of
  it even several weeks.  There are a few relatively fresh commits in
  it, but they are mostly fixes and simple cleanups.

  ACPI took the lead this time, both in terms of the number of commits
  and the number of modified lines of code, cpufreq follows and there
  are a few changes in the PM core and in cpuidle too.

  A new feature that already got some LWN.net's attention is the device
  PM QoS extension allowing latency tolerance requirements to be
  propagated from leaf devices to their ancestors with hardware
  interfaces for specifying latency tolerance.  That should help systems
  with hardware-driven power management to avoid going too far with it
  in cases when there are latency tolerance constraints.

  There also are some significant changes in the ACPI core related to
  the way in which hotplug notifications are handled.  They affect PCI
  hotplug (ACPIPHP) and the ACPI dock station code too.  The bottom line
  is that all those notification now go through the root notify handler
  and are propagated to the interested subsystems by means of callbacks
  instead of having to install a notify handler for each device object
  that we can potentially get hotplug notifications for.

  In addition to that ACPICA will now advertise "Windows 2013"
  compatibility for _OSI, because some systems out there don't work
  correctly if that is not done (some of them don't even boot).

  On the system suspend side of things, all of the device suspend and
  resume callbacks, except for ->prepare() and ->complete(), are now
  going to be executed asynchronously as that turns out to speed up
  system suspend and resume on some platforms quite significantly and we
  have a few more optimizations in that area.

  Apart from that, there are some new device IDs and fixes and cleanups
  all over.  In particular, the system suspend and resume handling by
  cpufreq should be improved and the cpuidle menu governor should be a
  bit more robust now.

  Specifics:

   - Device PM QoS support for latency tolerance constraints on systems
     with hardware interfaces allowing such constraints to be specified.
     That is necessary to prevent hardware-driven power management from
     becoming overly aggressive on some systems and to prevent power
     management features leading to excessive latencies from being used
     in some cases.

   - Consolidation of the handling of ACPI hotplug notifications for
     device objects.  This causes all device hotplug notifications to go
     through the root notify handler (that was executed for all of them
     anyway before) that propagates them to individual subsystems, if
     necessary, by executing callbacks provided by those subsystems
     (those callbacks are associated with struct acpi_device objects
     during device enumeration).  As a result, the code in question
     becomes both smaller in size and more straightforward and all of
     those changes should not affect users.

   - ACPICA update, including fixes related to the handling of _PRT in
     cases when it is broken and the addition of "Windows 2013" to the
     list of supported "features" for _OSI (which is necessary to
     support systems that work incorrectly or don't even boot without
     it).  Changes from Bob Moore and Lv Zheng.

   - Consolidation of ACPI _OST handling from Jiang Liu.

   - ACPI battery and AC fixes allowing unusual system configurations to
     be handled by that code from Alexander Mezin.

   - New device IDs for the ACPI LPSS driver from Chiau Ee Chew.

   - ACPI fan and thermal optimizations related to system suspend and
     resume from Aaron Lu.

   - Cleanups related to ACPI video from Jean Delvare.

   - Assorted ACPI fixes and cleanups from Al Stone, Hanjun Guo, Lan
     Tianyu, Paul Bolle, Tomasz Nowicki.

   - Intel RAPL (Running Average Power Limits) driver cleanups from
     Jacob Pan.

   - intel_pstate fixes and cleanups from Dirk Brandewie.

   - cpufreq fixes related to system suspend/resume handling from Viresh
     Kumar.

   - cpufreq core fixes and cleanups from Viresh Kumar, Stratos
     Karafotis, Saravana Kannan, Rashika Kheria, Joe Perches.

   - cpufreq drivers updates from Viresh Kumar, Zhuoyu Zhang, Rob
     Herring.

   - cpuidle fixes related to the menu governor from Tuukka Tikkanen.

   - cpuidle fix related to coupled CPUs handling from Paul Burton.

   - Asynchronous execution of all device suspend and resume callbacks,
     except for ->prepare and ->complete, during system suspend and
     resume from Chuansheng Liu.

   - Delayed resuming of runtime-suspended devices during system suspend
     for the PCI bus type and ACPI PM domain.

   - New set of PM helper routines to allow device runtime PM callbacks
     to be used during system suspend and resume more easily from Ulf
     Hansson.

   - Assorted fixes and cleanups in the PM core from Geert Uytterhoeven,
     Prabhakar Lad, Philipp Zabel, Rashika Kheria, Sebastian Capella.

   - devfreq fix from Saravana Kannan"

* tag 'pm+acpi-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits)
  PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugs
  PM / sleep: Correct whitespace errors in <linux/pm.h>
  intel_pstate: Set core to min P state during core offline
  cpufreq: Add stop CPU callback to cpufreq_driver interface
  cpufreq: Remove unnecessary braces
  cpufreq: Fix checkpatch errors and warnings
  cpufreq: powerpc: add cpufreq transition latency for FSL e500mc SoCs
  MAINTAINERS: Reorder maintainer addresses for PM and ACPI
  PM / Runtime: Update runtime_idle() documentation for return value meaning
  video / output: Drop display output class support
  fujitsu-laptop: Drop unneeded include
  acer-wmi: Stop selecting VIDEO_OUTPUT_CONTROL
  ACPI / gpu / drm: Stop selecting VIDEO_OUTPUT_CONTROL
  ACPI / video: fix ACPI_VIDEO dependencies
  cpufreq: remove unused notifier: CPUFREQ_{SUSPENDCHANGE|RESUMECHANGE}
  cpufreq: Do not allow ->setpolicy drivers to provide ->target
  cpufreq: arm_big_little: set 'physical_cluster' for each CPU
  cpufreq: arm_big_little: make vexpress driver depend on bL core driver
  ACPI / button: Add ACPI Button event via netlink routine
  ACPI: Remove duplicate definitions of PREFIX
  ...

Pull irq code updates from Thomas Gleixner:
 "The irq department proudly presents:

   - Another tree wide sweep of irq infrastructure abuse.  Clear winner
     of the trainwreck engineering contest was:
         #include "../../../kernel/irq/settings.h"

   - Tree wide update of irq_set_affinity() callbacks which miss a cpu
     online check when picking a single cpu out of the affinity mask.

   - Tree wide consolidation of interrupt statistics.

   - Updates to the threaded interrupt infrastructure to allow explicit
     wakeup of the interrupt thread and a variant of synchronize_irq()
     which synchronizes only the hard interrupt handler.  Both are
     needed to replace the homebrewn thread handling in the mmc/sdhci
     code.

   - New irq chip callbacks to allow proper support for GPIO based irqs.
     The GPIO based interrupts need to request/release GPIO resources
     from request/free_irq.

   - A few new ARM interrupt chips.  No revolutionary new hardware, just
     differently wreckaged variations of the scheme.

   - Small improvments, cleanups and updates all over the place"

I was hoping that that trainwreck engineering contest was a April Fools'
joke.  But no.

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits)
  irqchip: sun7i/sun6i: Disable NMI before registering the handler
  ARM: sun7i/sun6i: dts: Fix IRQ number for sun6i NMI controller
  ARM: sun7i/sun6i: irqchip: Update the documentation
  ARM: sun7i/sun6i: dts: Add NMI irqchip support
  ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller
  genirq: Export symbol no_action()
  arm: omap: Fix typo in ams-delta-fiq.c
  m68k: atari: Fix the last kernel_stat.h fallout
  irqchip: sun4i: Simplify sun4i_irq_ack
  irqchip: sun4i: Use handle_fasteoi_irq for all interrupts
  genirq: procfs: Make smp_affinity values go+r
  softirq: Add linux/irq.h to make it compile again
  m68k: amiga: Add linux/irq.h to make it compile again
  irqchip: sun4i: Don't ack IRQs > 0, fix acking of IRQ 0
  irqchip: sun4i: Fix a comment about mask register initialization
  irqchip: sun4i: Fix irq 0 not working
  genirq: Add a new IRQCHIP_EOI_THREADED flag
  genirq: Document IRQCHIP_ONESHOT_SAFE flag
  ARM: sunxi: dt: Convert to the new irq controller compatibles
  irqchip: sunxi: Change compatibles
  ...

Pull timer changes from Thomas Gleixner:
 "This assorted collection provides:

   - A new timer based timer broadcast feature for systems which do not
     provide a global accessible timer device.  That allows those
     systems to put CPUs into deep idle states where the per cpu timer
     device stops.

   - A few NOHZ_FULL related improvements to the timer wheel

   - The usual updates to timer devices found in ARM SoCs

   - Small improvements and updates all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  tick: Remove code duplication in tick_handle_periodic()
  tick: Fix spelling mistake in tick_handle_periodic()
  x86: hpet: Use proper destructor for delayed work
  workqueue: Provide destroy_delayed_work_on_stack()
  clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS
  timer: Remove code redundancy while calling get_nohz_timer_target()
  hrtimer: Rearrange comments in the order struct members are declared
  timer: Use variable head instead of &work_list in __run_timers()
  clocksource: exynos_mct: silence a static checker warning
  arm: zynq: Add support for cpufreq
  arm: zynq: Don't use arm_global_timer with cpufreq
  clocksource/cadence_ttc: Overhaul clocksource frequency adjustment
  clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled
  clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI
  sh: Remove Kconfig entries for TMU, CMT and MTU2
  ARM: shmobile: Remove CMT, TMU and STI Kconfig entries
  clocksource: armada-370-xp: Use atomic access for shared registers
  clocksource: orion: Use atomic access for shared registers
  clocksource: timer-keystone: Delete unnecessary variable
  clocksource: timer-keystone: introduce clocksource driver for Keystone
  ...

Pull x86 iommu quirk fix from Thomas Gleixner:
 "A quirk for the iommu quirk to include silicon which was assumed not
  to be out in the wild.

  This time with the correct logic applied"

* 'x86-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Adjust irq remapping quirk for older revisions of 5500/5520 chipsets

Pull x86 threadinfo changes from Ingo Molnar:
 "The main change here is the consolidation/unification of 32 and 64 bit
  thread_info handling methods, from Steve Rostedt"

* 'x86-threadinfo-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, threadinfo: Redo "x86: Use inline assembler to get sp"
  x86: Clean up dumpstack_64.c code
  x86: Keep thread_info on thread stack in x86_32
  x86: Prepare removal of previous_esp from i386 thread_info structure
  x86: Nuke GET_THREAD_INFO_WITH_ESP() macro for i386
  x86: Nuke the supervisor_stack field in i386 thread_info

Pull timer updates from Ingo Molnar:
 "The main purpose is to fix a full dynticks bug related to
  virtualization, where steal time accounting appears to be zero in
  /proc/stat even after a few seconds of competing guests running busy
  loops in a same host CPU.  It's not a regression though as it was
  there since the beginning.

  The other commits are preparatory work to fix the bug and various
  cleanups"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arch: Remove stub cputime.h headers
  sched: Remove needless round trip nsecs <-> tick conversion of steal time
  cputime: Fix jiffies based cputime assumption on steal accounting
  cputime: Bring cputime -> nsecs conversion
  cputime: Default implementation of nsecs -> cputime conversion
  cputime: Fix nsecs_to_cputime() return type cast

Pull x86 cpufeature update from Ingo Molnar:
 "Two refinements to clflushopt support"

* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpufeature: If we disable CLFLUSH, we should disable CLFLUSHOPT
  x86, cpufeature: Rename X86_FEATURE_CLFLSH to X86_FEATURE_CLFLUSH

Pull x86 reboot changes from Ingo Molnar:
 "Refine the reboot logic around the CF9 and EFI reboot methods, to make
  it more robust.  The expectation is for no working system to break,
  and for a couple of reboot-force systems to start rebooting
  automatically again"

* 'x86-reboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, reboot: Only use CF9_COND automatically, not CF9
  x86, reboot: Add EFI and CF9 reboot methods into the default list

Pull x86 mm change from Ingo Molnar:
 "A micro-optimization for acpi_numa_slit_init()"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Avoid duplicated pxm_to_node() calls

Pull AVR32 updates from Hans-Christian Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: replace simple_strtoul() with kstrtoul()
  arch/avr32/mm/cache.c: export symbol flush_icache_range() for module using
  avr32: remove cpu_data macro to fix compiles

simple_strtoul() is marked for obsoletion; use the newer and more
pleasant kstrtoul() in its place.

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>

Pull libata updates from Tejun Heo:
 "A lot of activities on libata side this time.

   - A lot of changes around ahci.  Various embedded platforms are
     implementing ahci controllers.  Some were built atop ahci_platform,
     others were doing their own things.  Hans made some structural
     changes to libahci and librarized ahci_platform so that ahci
     platform drivers can share more common code.  A couple platform
     drivers are added on top of that and several are added to replace
     older drivers which were doing their own things (older ones are
     scheduled to be removed).

   - Dan finishes the patchset to make libata PM operations
     asynchronous.  Combined with one patch being routed through scsi,
     this should speed resume measurably.

   - Various fixes and cleanups from Bartlomiej and others"

* 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (61 commits)
  ata: fix Marvell SATA driver dependencies
  ata: fix ARASAN CompactFlash PATA driver dependencies
  ata: remove superfluous casts
  ata: sata_highbank: remove superfluous cast
  ata: fix Calxeda Highbank SATA driver dependencies
  ata: fix R-Car SATA driver dependencies
  ARM: davinci: da850: update SATA AHCI support
  ata: add new-style AHCI platform driver for DaVinci DA850 AHCI controller
  ata: move library code from ahci_platform.c to libahci_platform.c
  ata: ahci_platform: fix ahci_platform_data->suspend method handling
  libata: remove unused ata_sas_port_async_resume() stub
  libata.h: add stub for ata_sas_port_resume
  libata: async resume
  libata, libsas: kill pm_result and related cleanup
  ata: Fix compiler warning with APM X-Gene host controller driver
  arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries
  ata: Add APM X-Gene SoC AHCI SATA host controller driver
  Documentation: Add documentation for the APM X-Gene SoC SATA host controller DTS binding
  arm64: Add APM X-Gene SoC 15Gbps Multi-purpose PHY DTS entries
  ata: ahci_sunxi: fix code formatting
  ...

Pull workqueue changes from Tejun Heo:
 "PREPARE_[DELAYED_]WORK() were used to change the work function of work
  items without fully reinitializing it; however, this makes workqueue
  consider the work item as a different one from before and allows the
  work item to start executing before the previous instance is finished
  which can lead to extremely subtle issues which are painful to debug.

  The interface has never been popular.  This pull request contains
  patches to remove existing usages and kill the interface.  As one of
  the changes was routed during the last devel cycle and another
  depended on a pending change in nvme, for-3.15 contains a couple merge
  commits.

  In addition, interfaces which were deprecated quite a while ago -
  __cancel_delayed_work() and WQ_NON_REENTRANT - are removed too"

* 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: remove deprecated WQ_NON_REENTRANT
  workqueue: Spelling s/instensive/intensive/
  workqueue: remove PREPARE_[DELAYED_]WORK()
  staging/fwserial: don't use PREPARE_WORK
  afs: don't use PREPARE_WORK
  nvme: don't use PREPARE_WORK
  usb: don't use PREPARE_DELAYED_WORK
  floppy: don't use PREPARE_[DELAYED_]WORK
  ps3-vuart: don't use PREPARE_WORK
  wireless/rt2x00: don't use PREPARE_WORK in rt2800usb.c
  workqueue: Remove deprecated __cancel_delayed_work()

Pull percpu changes from Tejun Heo:
 "The percpu allocation is now popular enough for the extremely naive
  range allocator to cause scalability issues.

  The existing allocator linearly scanned the allocation map on both
  alloc and free without making use of hint or anything.  Al
  reimplemented the range allocator so that it can use binary search
  instead of linear scan during free and alloc path uses simple hinting
  to avoid scanning in common cases.  Combined, the new allocator
  resolves the scalability issue percpu allocator was showing during
  container benchmark workload"

* 'for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: renew the max_contig if we merge the head and previous block
  percpu: allocation size should be even
  percpu: speed alloc_pcpu_area() up
  percpu: store offsets instead of lengths in ->map[]
  perpcu: fold pcpu_split_block() into the only caller

Pull ARM64 updates from Catalin Marinas:
 - KGDB support for arm64
 - PCI I/O space extended to 16M (in preparation of PCIe support
   patches)
 - Dropping ZONE_DMA32 in favour of ZONE_DMA (we only need one for the
   time being), together with swiotlb late initialisation to correctly
   setup the bounce buffer
 - DMA API cache maintenance support (not all ARMv8 platforms have
   hardware cache coherency)
 - Crypto extensions advertising via ELF_HWCAP2 for compat user space
 - Perf support for dwarf unwinding in compat mode
 - asm/tlb.h converted to the generic mmu_gather code
 - asm-generic rwsem implementation
 - Code clean-up

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (42 commits)
  arm64: Remove pgprot_dmacoherent()
  arm64: Support DMA_ATTR_WRITE_COMBINE
  arm64: Implement custom mmap functions for dma mapping
  arm64: Fix __range_ok macro
  arm64: Fix duplicated Kconfig entries
  arm64: mm: Route pmd thp functions through pte equivalents
  arm64: rwsem: use asm-generic rwsem implementation
  asm-generic: rwsem: de-PPCify rwsem.h
  arm64: enable generic CPU feature modalias matching for this architecture
  arm64: smp: make local symbol static
  arm64: debug: make local symbols static
  ARM64: perf: support dwarf unwinding in compat mode
  ARM64: perf: add support for frame pointer unwinding in compat mode
  ARM64: perf: add support for perf registers API
  arm64: Add boot time configuration of Intermediate Physical Address size
  arm64: Do not synchronise I and D caches for special ptes
  arm64: Make DMA coherent and strongly ordered mappings not executable
  arm64: barriers: add dmb barrier
  arm64: topology: Implement basic CPU topology support
  arm64: advertise ARMv8 extensions to 32-bit compat ELF binaries
  ...

Pull ia64 updates from Tony Luck:
 "Miscellaneous ia64 fixes for 3.15 merge window"

* tag 'please-pull-misc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] Keep format strings from leaking into printk
  Fix warning in make defconfig
  [IA64] sba_iommu: fix section mismatch To: linux-kernel@vger.kernel.org

Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Update defconfigs for v3.14-rc1
  [SCSI] atari_scsi: Fix sleep_on race
  m68k: head.S - Remove bogus L prefix in comment
  m68k: Remove dead code
  m68k: Remove CONSOLE_PENGUIN macro, adopt CONFIG_LOGO

Pull s390 updates from Martin Schwidefsky:
 "There are two memory management related changes, the CMMA support for
  KVM to avoid swap-in of freed pages and the split page table lock for
  the PMD level.  These two come with common code changes in mm/.

  A fix for the long standing theoretical TLB flush problem, this one
  comes with a common code change in kernel/sched/.

  Another set of changes is Heikos uaccess work, included is the initial
  set of patches with more to come.

  And fixes and cleanups as usual"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (36 commits)
  s390/con3270: optionally disable auto update
  s390/mm: remove unecessary parameter from pgste_ipte_notify
  s390/mm: remove unnecessary parameter from gmap_do_ipte_notify
  s390/mm: fixing comment so that parameter name match
  s390/smp: limit number of cpus in possible cpu mask
  hypfs: Add clarification for "weight_min" attribute
  s390: update defconfigs
  s390/ptrace: add support for PTRACE_SINGLEBLOCK
  s390/perf: make print_debug_cf() static
  s390/topology: Remove call to update_cpu_masks()
  s390/compat: remove compat exec domain
  s390: select CONFIG_TTY for use of tty in unconditional keyboard driver
  s390/appldata_os: fix cpu array size calculation
  s390/checksum: remove memset() within csum_partial_copy_from_user()
  s390/uaccess: remove copy_from_user_real()
  s390/sclp_early: Return correct HSA block count also for zero
  s390: add some drivers/subsystems to the MAINTAINERS file
  s390: improve debug feature usage
  s390/airq: add support for irq ranges
  s390/mm: enable split page table lock for PMD level
  ...

Pull s390 compat wrapper rework from Heiko Carstens:
 "S390 compat system call wrapper simplification work.

  The intention of this work is to get rid of all hand written assembly
  compat system call wrappers on s390, which perform proper sign or zero
  extension, or pointer conversion of compat system call parameters.
  Instead all of this should be done with C code eg by using Al's
  COMPAT_SYSCALL_DEFINEx() macro.

  Therefore all common code and s390 specific compat system calls have
  been converted to the COMPAT_SYSCALL_DEFINEx() macro.

  In order to generate correct code all compat system calls may only
  have eg compat_ulong_t parameters, but no unsigned long parameters.
  Those patches which change parameter types from unsigned long to
  compat_ulong_t parameters are separate in this series, but shouldn't
  cause any harm.

  The only compat system calls which intentionally have 64 bit
  parameters (preadv64 and pwritev64) in support of the x86/32 ABI
  haven't been changed, but are now only available if an architecture
  defines __ARCH_WANT_COMPAT_SYS_PREADV64/PWRITEV64.

  System calls which do not have a compat variant but still need proper
  zero extension on s390, like eg "long sys_brk(unsigned long brk)" will
  get a proper wrapper function with the new s390 specific
  COMPAT_SYSCALL_WRAPx() macro:

     COMPAT_SYSCALL_WRAP1(brk, unsigned long, brk);

  which generates the following code (simplified):

     asmlinkage long sys_brk(unsigned long brk);
     asmlinkage long compat_sys_brk(long brk)
     {
         return sys_brk((u32)brk);
     }

  Given that the C file which contains all the COMPAT_SYSCALL_WRAP lines
  includes both linux/syscall.h and linux/compat.h, it will generate
  build errors, if the declaration of sys_brk() doesn't match, or if
  there exists a non-matching compat_sys_brk() declaration.

  In addition this will intentionally result in a link error if
  somewhere else a compat_sys_brk() function exists, which probably
  should have been used instead.  Two more BUILD_BUG_ONs make sure the
  size and type of each compat syscall parameter can be handled
  correctly with the s390 specific macros.

  I converted the compat system calls step by step to verify the
  generated code is correct and matches the previous code.  In fact it
  did not always match, however that was always a bug in the hand
  written asm code.

  In result we get less code, less bugs, and much more sanity checking"

* 'compat' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (44 commits)
  s390/compat: add copyright statement
  compat: include linux/unistd.h within linux/compat.h
  s390/compat: get rid of compat wrapper assembly code
  s390/compat: build error for large compat syscall args
  mm/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
  kexec/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
  net/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
  ipc/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
  fs/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types
  ipc/compat: convert to COMPAT_SYSCALL_DEFINE
  fs/compat: convert to COMPAT_SYSCALL_DEFINE
  security/compat: convert to COMPAT_SYSCALL_DEFINE
  mm/compat: convert to COMPAT_SYSCALL_DEFINE
  net/compat: convert to COMPAT_SYSCALL_DEFINE
  kernel/compat: convert to COMPAT_SYSCALL_DEFINE
  fs/compat: optional preadv64/pwrite64 compat system calls
  ipc/compat_sys_msgrcv: change msgtyp type from long to compat_long_t
  s390/compat: partial parameter conversion within syscall wrappers
  s390/compat: automatic zero, sign and pointer conversion of syscalls
  s390/compat: add sync_file_range and fallocate compat syscalls
  ...

Pull x86 LTO changes from Peter Anvin:
 "More infrastructure work in preparation for link-time optimization
  (LTO).  Most of these changes is to make sure symbols accessed from
  assembly code are properly marked as visible so the linker doesn't
  remove them.

  My understanding is that the changes to support LTO are still not
  upstream in binutils, but are on the way there.  This patchset should
  conclude the x86-specific changes, and remaining patches to actually
  enable LTO will be fed through the Kbuild tree (other than keeping up
  with changes to the x86 code base, of course), although not
  necessarily in this merge window"

* 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  Kbuild, lto: Handle basic LTO in modpost
  Kbuild, lto: Disable LTO for asm-offsets.c
  Kbuild, lto: Add a gcc-ld script to let run gcc as ld
  Kbuild, lto: add ld-version and ld-ifversion macros
  Kbuild, lto: Drop .number postfixes in modpost
  Kbuild, lto, workaround: Don't warn for initcall_reference in modpost
  lto: Disable LTO for sys_ni
  lto: Handle LTO common symbols in module loader
  lto, workaround: Add workaround for initcall reordering
  lto: Make asmlinkage __visible
  x86, lto: Disable LTO for the x86 VDSO
  initconst, x86: Fix initconst mistake in ts5500 code
  initconst: Fix initconst mistake in dcdbas
  asmlinkage: Make trace_hardirqs_on/off_caller visible
  asmlinkage, x86: Fix 32bit memcpy for LTO
  asmlinkage Make __stack_chk_failed and memcmp visible
  asmlinkage: Mark rwsem functions that can be called from assembler asmlinkage
  asmlinkage: Make main_extable_sort_needed visible
  asmlinkage, mutex: Mark __visible
  asmlinkage: Make trace_hardirq visible
  ...

Commit 03bbcb2e (iommu/vt-d: add quirk for broken interrupt
remapping on 55XX chipsets) properly disables irq remapping on the
5500/5520 chipsets that don't correctly perform that feature.

However, when I wrote it, I followed the errata sheet linked in that
commit too closely, and explicitly tied the activation of the quirk to
revision 0x13 of the chip, under the assumption that earlier revisions
were not in the field.  Recently a system was reported to be suffering
from this remap bug and the quirk hadn't triggered, because the
revision id register read at a lower value that 0x13, so the quirk
test failed improperly.  Given this, it seems only prudent to adjust
this quirk so that any revision less than 0x13 has the quirk asserted.

[ tglx: Removed the 0x12 comparison of pci id 3405 as this is covered
    	by the <= 0x13 check already ]
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1394649873-14913-1-git-send-email-nhorman@tuxdriver.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Pull x86 kaslr update from Ingo Molnar:
 "This adds kernel module load address randomization"

* 'x86-kaslr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, kaslr: fix module lock ordering problem
  x86, kaslr: randomize module base load address

Pull x86 hyperv change from Ingo Molnar:
 "Skip the timer_irq_works() check on hyperv systems"

* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, hyperv: Bypass the timer_irq_works() check

Pull x86 hashing changes from Ingo Molnar:
 "Small fixes and cleanups to the librarized arch_fast_hash() methods,
  used by the net/openvswitch code"

* 'x86-hash-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, hash: Simplify switch, add __init annotation
  x86, hash: Swap arguments passed to crc32_u32()
  x86, hash: Fix build failure with older binutils

Pull x86 EFI changes from Ingo Molnar:
 "The main changes:

  - Add debug code to the dump EFI pagetable - Borislav Petkov

  - Make 1:1 runtime mapping robust when booting on machines with lots
    of memory - Borislav Petkov

  - Move the EFI facilities bits out of 'x86_efi_facility' and into
    efi.flags which is the standard architecture independent place to
    keep EFI state, by Matt Fleming.

  - Add 'EFI mixed mode' support: this allows 64-bit kernels to be
    booted from 32-bit firmware.  This needs a bootloader that supports
    the 'EFI handover protocol'.  By Matt Fleming"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  x86, efi: Abstract x86 efi_early calls
  x86/efi: Restore 'attr' argument to query_variable_info()
  x86/efi: Rip out phys_efi_get_time()
  x86/efi: Preserve segment registers in mixed mode
  x86/boot: Fix non-EFI build
  x86, tools: Fix up compiler warnings
  x86/efi: Re-disable interrupts after calling firmware services
  x86/boot: Don't overwrite cr4 when enabling PAE
  x86/efi: Wire up CONFIG_EFI_MIXED
  x86/efi: Add mixed runtime services support
  x86/efi: Firmware agnostic handover entry points
  x86/efi: Split the boot stub into 32/64 code paths
  x86/efi: Add early thunk code to go from 64-bit to 32-bit
  x86/efi: Build our own EFI services pointer table
  efi: Add separate 32-bit/64-bit definitions
  x86/efi: Delete dead code when checking for non-native
  x86/mm/pageattr: Always dump the right page table in an oops
  x86, tools: Consolidate #ifdef code
  x86/boot: Cleanup header.S by removing some #ifdefs
  efi: Use NULL instead of 0 for pointer
  ...

Pull x86 debug cleanup from Ingo Molnar:
 "A single trivial cleanup"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  i386: Remove unneeded test of 'task' in dump_trace() (again)