- 14 Apr, 2009 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Add in PCI bus for DMA API debugging. sh: Pre-allocate a reasonable number of DMA debug entries. sh: sh7786: modify usb setup timeout judgment bug. MAINTAINERS: Update sh architecture file patterns. sh: ap325: use edge control for ov772x camera sh: Plug in support for ARCH=sh64 using sh SRCARCH. sh: urquell: Fix up address mapping in board comments. sh: Add support for DMA API debugging. sh: Provide cpumask_of_pcibus() to fix NUMA build. sh: urquell: Add board comment sh: wire up sys_preadv/sys_pwritev() syscalls. sh: sh7785lcr: fix PCI address map for 32-bit mode sh: intc: Added resume from hibernation support to the intc
-
David Howells authored
Fix lpfc_parse_bg_err()'s use of do_div(). It should be passing a 64-bit variable as the first parameter. However, since it's only using a 32-bit variable, it doesn't need to use do_div() at all, but can instead use the division operator. This deals with the following warnings: CC drivers/scsi/lpfc/lpfc_scsi.o drivers/scsi/lpfc/lpfc_scsi.c: In function 'lpfc_parse_bg_err': drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: comparison of distinct pointer types lacks a cast drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: right shift count >= width of type drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: passing argument 1 of '__div64_32' from incompatible pointer type Signed-off-by:David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Leandro Dorileo authored
Updates some usb_serial_port members documentation. Signed-off-by:
Leandro Dorileo <ldorileo@gmail.com> Signed-off-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Tony Breeds authored
In commit 51dcdfec ("parport: Use the PCI IRQ if offered") parport_pc_probe_port() gained an irqflags arg. This isn't being supplied on powerpc. This patch make powerpc fallback to the old behaviour, that is using "0" for irqflags. Fixes build failure: In file included from drivers/parport/parport_pc.c:68: arch/powerpc/include/asm/parport.h: In function 'parport_pc_find_nonpci_ports': arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' make[3]: *** [drivers/parport/parport_pc.o] Error 1 Signed-off-by:
Tony Breeds <tony@bakeyournoodle.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
These got overlooked first time around. Signed-off-by:
-
Alan Cox authored
If the ti-usb adapter returns an zero data length frame (which happens) then we leak a kref. Found by Christoph Mair <christoph.mair@gmail.com> who proposed a patch. The patch here is different as Christoph's patch didn't work for the case where tty = NULL and data arrived but Christoph did all the hard work chasing it down. Signed-off-by:
-
Alan Cox authored
ACM sets the low latency flag but calls the flip buffer routines from IRQ context which isn't permitted (and as of 2.6.29 causes a warning hence this one was caught) Fortunatelt ACM doesn't need to set this flag in the first place as it only set it to work around problems in ancient (pre tty flip rewrite) kernels. Reported-by:
Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
-
Paul Mundt authored
This adds in the pci_bus_type for DMA API debug. Signed-off-by:Paul Mundt <lethal@linux-sh.org>
-
Paul Mundt authored
This prevents the DMA API debugging from running out of entries right away on boot. Defines 4096 entries by default, which while a bit on the heavy side, ought to leave enough breathing room for some time. Signed-off-by: -
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: tomoyo: version bump to 2.2.0. tomoyo: add Documentation/tomoyo.txt
-
Linus Torvalds authored
We ended up incorrectly using '&cur' instead of '&readin' in the work_on_cpu() -> smp_call_function_single() transformation in commit 01599fca ("cpufreq: use smp_call_function_[single|many]() in acpi-cpufreq.c"). Andrew explains: "OK, the acpi tree went and had conflicting changes merged into it after I'd written the patch and it appears that I incorrectly reverted part of 18b2646f while fixing the resulting rejects. Switching it to `readin' looks correct." Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
- 13 Apr, 2009 29 commits
-
-
Tetsuo Handa authored
Signed-off-by:
Kentaro Takeda <takedakn@nttdata.co.jp> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
Toshiharu Harada <haradats@nttdata.co.jp> Signed-off-by:
James Morris <jmorris@namei.org>
-
Tetsuo Handa authored
Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xenLinus Torvalds authored
* 'for-rc1/xen/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: add FIX_TEXT_POKE to fixmap xen: honour VCPU availability on boot xen: clean up gate trap/interrupt constants xen: set _PAGE_NX in __supported_pte_mask before pagetable construction xen: resume interrupts before system devices. xen/mmu: weaken flush_tlb_other test xen/mmu: some early pagetable cleanups Xen: Add virt_to_pfn helper function x86-64: remove PGE from must-have feature list xen: mask XSAVE from cpuid NULL noise: arch/x86/xen/smp.c xen: remove xen_load_gdt debug xen: make xen_load_gdt simpler xen: clean up xen_load_gdt xen: split construction of p2m mfn tables from registration xen: separate p2m allocation from setting xen: disable preempt for leave_lazy_mmu
-
Kuninori Morimoto authored
This corrects a race with the PHY RST bit not being set properly if the PLL status changes right before timeout. This resulted in it potentially failing even if the device came up in time. Special thanks to Mr. Juha Leppanen and Iwamatsu-san for reporting this out and reviewing it. Reported-by:
Juha Leppanen <juha_motorsportcom@luukku.com> Reviewed-by:
Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Tested-by:
Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by:
-
Jean Delvare authored
The edac-core driver includes code which assumes that the work_struct which is included in every delayed_work is the first member of that structure. This is currently the case but might change in the future, so use to_delayed_work() instead, which doesn't make such an assumption. linux-2.6.30-rc1 has the to_delayed_work() function that will allow this patch to work Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Doug Thompson <dougthompson@xmission.com> Signed-off-by:
-
Jeff Haran authored
Fix the edac local pci_write_bits32 to properly note the 'escape' mask if all ones in a 32-bit word. Currently no consumer of this function uses that mask, so there is no danger to existing code. Signed-off-by:
Jeff Haran <jharan@Brocade.COM> Signed-off-by:
-
Robin Holt authored
Introduce xpc_arch_ops and eliminate numerous individual global definitions. Signed-off-by:
Robin Holt <holt@sgi.com> Cc: Dean Nelson <dcn@sgi.com> Signed-off-by:
-
Robin Holt authored
sgi-xpc has a window of failure where an open message can be sent and a subsequent data message can get lost. We have added a new message (opencomplete) which closes that window. Signed-off-by:
Dean Nelson <dcn@sgi.com> Signed-off-by:
-
Robin Holt authored
The heartbeat timeout functionality in sgi-xpc is currently not trained to the connection time. If a connection is made and the code is in the last polling window prior to doing a timeout, the next polling window will see the heartbeat as unchanged and initiate a no-heartbeat disconnect. Signed-off-by:
-
Robin Holt authored
Dean has moved on to other work. His responsibilities for XP/XPC/XPNET have been handed to me. Signed-off-by:
-
Shen Feng authored
Use the default mountpoint of debugfs in the pktcdvd ABI. Signed-off-by:
Shen Feng <shen@cn.fujitsu.com> Cc: <balagi@justmail.de> Signed-off-by:
-
Bharata B Rao authored
The description about various statistics from memory.stat is not accurate and confusing at times. Correct this along with a few other minor cleanups. Signed-off-by:
Bharata B Rao <bharata@linux.vnet.ibm.com> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Yang Hongyang authored
This is the second go through of the old DMA_nBIT_MASK macro,and there're not so many of them left,so I put them into one patch.I hope this is the last round. After this the definition of the old DMA_nBIT_MASK macro could be removed. Signed-off-by:
Yang Hongyang <yanghy@cn.fujitsu.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Greg KH <greg@kroah.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jan Kara authored
If two writers allocating blocks to file race with each other (e.g. because writepages races with ordinary write or two writepages race with each other), ext2_getblock() can be called on the same inode in parallel. Before we are going to allocate new blocks, we have to recheck the block chain we have obtained so far without holding truncate_mutex. Otherwise we could overwrite the indirect block pointer set by the other writer leading to data loss. The below test program by Ying is able to reproduce the data loss with ext2 on in BRD in a few minutes if the machine is under memory pressure: long kMemSize = 50 << 20; int kPageSize = 4096; int main(int argc, char **argv) { int status; int count = 0; int i; char *fname = "/mnt/test.mmap"; char *mem; unlink(fname); int fd = open(fname, O_CREAT | O_EXCL | O_RDWR, 0600); status = ftruncate(fd, kMemSize); mem = mmap(0, kMemSize, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); // Fill the memory with 1s. memset(mem, 1, kMemSize); sleep(2); for (i = 0; i < kMemSize; i++) { int byte_good = mem[i] != 0; if (!byte_good && ((i % kPageSize) == 0)) { //printf("%d ", i / kPageSize); count++; } } munmap(mem, kMemSize); close(fd); unlink(fname); if (count > 0) { printf("Running %d bad page\n", count); return 1; } return 0; } Cc: Ying Han <yinghan@google.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:Jan Kara <jack@suse.cz> Cc: Mingming Cao <cmm@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Hugh Dickins authored
SHMEM_MAX_BYTES was derived from the maximum size of its triple-indirect swap vector, forgetting to take the MAX_LFS_FILESIZE limit into account. Never mind 256kB pages, even 8kB pages on 32-bit kernels allowed files to grow slightly bigger than that supposed maximum. Fix this by using the min of both (at build time not run time). And it happens that this calculation is good as far as 8MB pages on 32-bit or 16MB pages on 64-bit: though SHMSWP_MAX_INDEX gets truncated before that, it's truncated to such large numbers that we don't need to care. [akpm@linux-foundation.org: it needs pagemap.h] [akpm@linux-foundation.org: fix sparc64 min() warnings] Signed-off-by:
Hugh Dickins <hugh@veritas.com> Cc: Yuri Tikhonov <yur@emcraft.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Yuri Tikhonov authored
Fix a division by zero which we have in shmem_truncate_range() and shmem_unuse_inode() when using big PAGE_SIZE values (e.g. 256kB on ppc44x). With 256kB PAGE_SIZE, the ENTRIES_PER_PAGEPAGE constant becomes too large (0x1.0000.0000) on a 32-bit kernel, so this patch just changes its type from 'unsigned long' to 'unsigned long long'. Hugh: reverted its unsigned long longs in shmem_truncate_range() and shmem_getpage(): the pagecache index cannot be more than an unsigned long, so the divisions by zero occurred in unreached code. It's a pity we need any ULL arithmetic here, but I found no pretty way to avoid it. Signed-off-by:
Yuri Tikhonov <yur@emcraft.com> Signed-off-by:
-
Stefan Husemann authored
Support the Intel 854 Chipset in fbdev. We test and use the patch on a Thomson IP1101 IPTV-Box. On the VGA-Port we get a normal signal. Here is the link to the Mambux-Project: http://www.mambux.de Cc: Keith Packard <keithp@keithp.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
Stefan Husemann <shusemann@googlemail.com> Signed-off-by:
-
Michael Ellerman authored
I'm sure everyone knows this, but I didn't, so I googled it, and found a nice explanation from Linus. Might be worth sticking in Documentation. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
mm/memcontrol.c:318: warning: `mem_cgroup_is_obsolete' defined but not used [akpm@linux-foundation.org: simplify as suggested by Balbir] Signed-off-by:
-
Andi Kleen authored
Impact: cleanup, fix Clean up sys_shutdown() exit path. Factor out common code. Return correct error code instead of always 0 on failure. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Geert Uytterhoeven authored
| drivers/misc/eeprom/at25.c:358: warning: assignment from incompatible pointer type Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Geert Uytterhoeven authored
| drivers/misc/eeprom/at24.c:508: warning: assignment from incompatible pointer type Signed-off-by:
-
Jan Kara authored
Update information about locking in JBD revoke code. Reported-by: Lin Tan <tammy000@gmail.com>. Signed-off-by:
-
Andy Grover authored
While better than get_user_pages(), the usage of gupf(), especially the return values and the fact that it can potentially only partially pin the range, warranted some documentation. Signed-off-by:
Andy Grover <andy.grover@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Randy Robertson authored
Change cb6ff208 ("NOMMU: Support XIP on initramfs") seems to have broken booting from initramfs with /sbin/init being a hardlink. It seems like the logic required for XIP on nommu, i.e. ftruncate to reported cpio header file size (body_len) is broken for hardlinks, which have a reported size of 0, and the truncate thus nukes the contents of the file (in my case busybox), making boot impossible and ending with runaway loop modprobe binfmt-0000 - and of course 0000 is not a valid binary format. My fix is to only call ftruncate if size is non-zero which fixes things for me, but I'm not certain whether this will break XIP for those files on nommu systems, although I would guess not. Signed-off-by:
Randy Robertson <rmrobert@vmware.com> Acked-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Oleg Nesterov authored
Pointed out by Roland. The bug was recently introduced by me in "forget_original_parent: split out the un-ptrace part", commit 39c626ae. Since that patch we have a window after exit_ptrace() drops tasklist and before forget_original_parent() takes it again. In this window the child can do ptrace(PTRACE_TRACEME) and nobody can untrace this child after that. Change ptrace_traceme() to not attach to the exiting ->real_parent. We don't report the error in this case, we pretend we attach right before ->real_parent calls exit_ptrace() which should untrace us anyway. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Jean Delvare authored
Signed-off-by:
-
David Howells authored
Do a bit of reformatting on the Unevictable-LRU documentation. Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
David Howells authored
Point the UNEVICTABLE_LRU config option at the documentation describing the option. Signed-off-by:
-
