- 17 Jun, 2014 40 commits
-
-
Linus Torvalds authored
commit fa81511b upstream. Checkin: b3b42ac2 x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels disabled 16-bit segments on 64-bit kernels due to an information leak. However, it does seem that people are genuinely using Wine to run old 16-bit Windows programs on Linux. A proper fix for this ("espfix64") is coming in the upcoming merge window, but as a temporary fix, create a sysctl to allow the administrator to re-enable support for 16-bit segments. It adds a "/proc/sys/abi/ldt16" sysctl that defaults to zero (off). If you hit this issue and care about your old Windows program more than you care about a kernel stack address information leak, you can do echo 1 > /proc/sys/abi/ldt16 as root (add it to your startup scripts), and you should be ok. The sysctl table is only added if you have COMPAT support enabled on x86-64, but I assume anybody who runs old windows binaries very much does that ;) Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/CA%2B55aFw9BPoD10U1LfHbOMpHWZkvJTkMcfCs9s3urPr1YyWBxw@mail.gmail.comSigned-off-by:
Kamal Mostafa <kamal@canonical.com>
-
James Hogan authored
commit d71f290b upstream. Specify the maximum stack size for arches where the stack grows upward (parisc and metag) in asm/processor.h rather than hard coding in fs/exec.c so that metag can specify a smaller value of 256MB rather than 1GB. This fixes a BUG on metag if the RLIMIT_STACK hard limit is increased beyond a safe value by root. E.g. when starting a process after running "ulimit -H -s unlimited" it will then attempt to use a stack size of the maximum 1GB which is far too big for metag's limited user virtual address space (stack_top is usually 0x3ffff000): BUG: failure at fs/exec.c:589/shift_arg_pages()! Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: linux-parisc@vger.kernel.org Cc: linux-metag@vger.kernel.org Cc: John David Anglin <dave.anglin@bell.net> Signed-off-by:
-
Mikulas Patocka authored
commit 2425ce84 upstream. Volatile access doesn't really imply the compiler barrier. Volatile access is only ordered with respect to other volatile accesses, it isn't ordered with respect to general memory accesses. Gcc may reorder memory accesses around volatile access, as we can see in this simple example (if we compile it with optimization, both increments of *b will be collapsed to just one): void fn(volatile int *a, long *b) { (*b)++; *a = 10; (*b)++; } Consequently, we need the compiler barrier after a write to the volatile variable, to make sure that the compiler doesn't reorder the volatile write with something else. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Acked-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Mikulas Patocka authored
commit 610f2de3 upstream. The DM crypt target used per-cpu structures to hold pointers to a ablkcipher_request structure. The code assumed that the work item keeps executing on a single CPU, so it didn't use synchronization when accessing this structure. If a CPU is disabled by writing 0 to /sys/devices/system/cpu/cpu*/online, the work item could be moved to another CPU. This causes dm-crypt crashes, like the following, because the code starts using an incorrect ablkcipher_request: smpboot: CPU 7 is now offline BUG: unable to handle kernel NULL pointer dereference at 0000000000000130 IP: [<ffffffffa1862b3d>] crypt_convert+0x12d/0x3c0 [dm_crypt] ... Call Trace: [<ffffffffa1864415>] ? kcryptd_crypt+0x305/0x470 [dm_crypt] [<ffffffff81062060>] ? finish_task_switch+0x40/0xc0 [<ffffffff81052a28>] ? process_one_work+0x168/0x470 [<ffffffff8105366b>] ? worker_thread+0x10b/0x390 [<ffffffff81053560>] ? manage_workers.isra.26+0x290/0x290 [<ffffffff81058d9f>] ? kthread+0xaf/0xc0 [<ffffffff81058cf0>] ? kthread_create_on_node+0x120/0x120 [<ffffffff813464ac>] ? ret_from_fork+0x7c/0xb0 [<ffffffff81058cf0>] ? kthread_create_on_node+0x120/0x120 Fix this bug by removing the per-cpu definition. The structure ablkcipher_request is accessed via a pointer from convert_context. Consequently, if the work item is rescheduled to a different CPU, the thread still uses the same ablkcipher_request. This change may undermine performance improvements intended by commit c0297721 ("dm crypt: scale to multiple cpus") on select hardware. In practice no performance difference was observed on recent hardware. But regardless, correctness is more important than performance. Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Wolfram Sang authored
commit d7653964 upstream. This hardware does not support zero length transfers. Instead, the driver does one (random) byte transfers currently with undefined results for the slaves. We now bail out. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Olof Johansson authored
commit ce78cc07 upstream. Don't unmark the device as suspended until after it's been re-setup. The main race would be w.r.t. an i2c driver that gets resumed at the same time (asyncronously), that is allowed to do a transfer since suspended is set to 0 before reinit, but really should have seen the -EIO return instead. Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Doug Anderson <dianders@chromium.org> Acked-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Du, Wenkai authored
commit 47bb27e7 upstream. There have been "i2c_designware 80860F41:00: controller timed out" errors on a number of Baytrail platforms. The issue is caused by incorrect value in Interrupt Mask Register (DW_IC_INTR_MASK) when i2c core is being enabled. This causes call to __i2c_dw_enable() to immediately start the transfer which leads to timeout. There are 3 failure modes observed: 1. Failure in S0 to S3 resume path The default value after reset for DW_IC_INTR_MASK is 0x8ff. When we start the first transaction after resuming from system sleep, TX_EMPTY interrupt is already unmasked because of the hardware default. 2. Failure in normal operational path This failure happens rarely and is hard to reproduce. Debug trace showed that DW_IC_INTR_MASK had value of 0x254 when failure occurred, which meant TX_EMPTY was unmasked. 3. Failure in S3 to S0 suspend path This failure also happens rarely and is hard to reproduce. Adding debug trace that read DW_IC_INTR_MASK made this failure not reproducible. But from ISR call trace we could conclude TX_EMPTY was unmasked when problem occurred. The patch masks all interrupts before the controller is enabled to resolve the faulty DW_IC_INTR_MASK conditions. Signed-off-by:
Wenkai Du <wenkai.du@intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> [wsa: improved the comment and removed typo in commit msg] Signed-off-by:
-
Anthony Iliopoulos authored
commit 9844f546 upstream. The invalidation is required in order to maintain proper semantics under CoW conditions. In scenarios where a process clones several threads, a thread operating on a core whose DTLB entry for a particular hugepage has not been invalidated, will be reading from the hugepage that belongs to the forked child process, even after hugetlb_cow(). The thread will not see the updated page as long as the stale DTLB entry remains cached, the thread attempts to write into the page, the child process exits, or the thread gets migrated to a different processor. Signed-off-by:
Anthony Iliopoulos <anthony.iliopoulos@huawei.com> Link: http://lkml.kernel.org/r/20140514092948.GA17391@server-36.huawei.corpSuggested-by:
Shay Goikhman <shay.goikhman@huawei.com> Acked-by:
Dave Hansen <dave.hansen@intel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
commit 97d9d23d upstream. If a struct contains 64-bit fields, it is aligned on 64-bit boundaries within containing structs in 64-bit compilations. This is the case with struct v4l2_window, which contains pointers and is embedded into struct v4l2_format, and that one is embedded into struct v4l2_create_buffers. Unlike some other structs, used as a part of the kernel ABI as ioctl() arguments, that are packed, these structs aren't packed. This isn't a problem per se, but the ioctl-compat code for VIDIOC_CREATE_BUFS contains a bug, that triggers in such 64-bit builds. That code wrongly assumes, that in struct v4l2_create_buffers, struct v4l2_format immediately follows the __u32 memory field, which in fact isn't the case. This bug wasn't visible until now, because until recently hardly any applications used this ioctl() and mostly embedded 32-bit only drivers implemented it. This is changing now with addition of this ioctl() to some USB drivers, e.g. UVC. This patch fixes the bug by copying parts of struct v4l2_create_buffers separately. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Guennadi Liakhovetski authored
commit cfece585 upstream. Commit 75e2bdad "ov7670: allow configuration of image size, clock speed, and I/O method" uses a wrong index to iterate an array. Apart from being wrong, it also uses an unchecked value from user-space, which can cause access to unmapped memory in the kernel, triggered by a normal desktop user with rights to use V4L2 devices. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Charles Keepax authored
commit 44330ab5 upstream. The register CLASS_D_CONTROL_1 is marked as volatile because it contains a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1 register. This causes problems for the "Speaker Switch" control, which will report an error if the CODEC is suspended because it relies on a volatile register. To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and manually keep the register cache in sync by updating both bits when changing the mute status. Reported-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Alex Williamson authored
commit e028a9e6 upstream. An apparent cut and paste error prevents the correct flags from being set on the alias device resulting in MSI on conventional PCI devices failing to work. This also produces error events from the IOMMU like: AMD-Vi: Event logged [INVALID_DEVICE_REQUEST device=00:14.4 address=0x000000fdf8000000 flags=0x0a00] Where 14.4 is a PCIe-to-PCI bridge with a device behind it trying to use MSI interrupts. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
Josef Gajdusek authored
commit 3a18e139 upstream. The datasheet for EMC1413/EMC1414, which is fully compatible to EMC1403/1404 and uses the same chip identification, references revision numbers 0x01, 0x03, and 0x04. Accept the full range of revision numbers from 0x01 to 0x04 to make sure none are missed. Signed-off-by:
Josef Gajdusek <atx@atx.name> [Guenter Roeck: Updated headline and description] Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Jean Delvare authored
commit 8759f904 upstream. Commit 454aee17 claims to convert driver emc1403 to use devm_hwmon_device_register_with_groups, however the patch itself makes use of hwmon_device_register_with_groups instead. As the driver remove function was still dropped, the hwmon device is no longer unregistered on driver removal, leading to a resource leak. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Fixes: 454aee17 hwmon: (emc1403) Convert to use devm_hwmon_device_register_with_groups Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Josef Gajdusek authored
commit 17c048fc upstream. Attempts to set the hysteresis value to a temperature below the target limit fails with "write error: Numerical result out of range" due to an inverted comparison. Signed-off-by:
-
Viresh Kumar authored
commit 84ea7fe3 upstream. switch_hrtimer_base() calls hrtimer_check_target() which ensures that we do not migrate a timer to a remote cpu if the timer expires before the current programmed expiry time on that remote cpu. But __hrtimer_start_range_ns() calls switch_hrtimer_base() before the new expiry time is set. So the sanity check in hrtimer_check_target() is operating on stale or even uninitialized data. Update expiry time before calling switch_hrtimer_base(). [ tglx: Rewrote changelog once again ] Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: linaro-networking@linaro.org Cc: fweisbec@gmail.com Cc: arvind.chauhan@arm.com Link: http://lkml.kernel.org/r/81999e148745fc51bbcd0615823fbab9b2e87e23.1399882253.git.viresh.kumar@linaro.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Gavin Shan authored
commit 372cf124 upstream. Resetting root port has more stuff to do than that for PCIe switch ports and we should have resetting root port done in firmware instead of the kernel itself. The problem was introduced by commit 5b2e198e ("powerpc/powernv: Rework EEH reset"). Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Dirk Brandewie authored
commit 21855ff5 upstream. A documentation update exposed that there is a separate set of VID values that must be used in the turbo/boost P state range. Add enumerating and setting the correct VID for P states in the turbo range. Signed-off-by:
Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Kirill A. Shutemov authored
commit dd18dbc2 upstream. It's critical for split_huge_page() (and migration) to catch and freeze all PMDs on rmap walk. It gets tricky if there's concurrent fork() or mremap() since usually we copy/move page table entries on dup_mm() or move_page_tables() without rmap lock taken. To get it work we rely on rmap walk order to not miss any entry. We expect to see destination VMA after source one to work correctly. But after switching rmap implementation to interval tree it's not always possible to preserve expected walk order. It works fine for dup_mm() since new VMA has the same vma_start_pgoff() / vma_last_pgoff() and explicitly insert dst VMA after src one with vma_interval_tree_insert_after(). But on move_vma() destination VMA can be merged into adjacent one and as result shifted left in interval tree. Fortunately, we can detect the situation and prevent race with rmap walk by moving page table entries under rmap lock. See commit 38a76013. Problem is that we miss the lock when we move transhuge PMD. Most likely this bug caused the crash[1]. [1] http://thread.gmane.org/gmane.linux.kernel.mm/96473 Fixes: 108d6642 ("mm anon rmap: remove anon_vma_moveto_tail") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Acked-by:
Michel Lespinasse <walken@google.com> Cc: Dave Jones <davej@redhat.com> Cc: David Miller <davem@davemloft.net> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Sascha Hauer authored
commit 6d66da89 upstream. The IPU register space is 128MB, not 2GB. Fixes: abed9a6b 'ARM i.MX53: Add IPU support' Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Shawn Guo <shawn.guo@freescale.com> Signed-off-by:
-
Jani Nikula authored
commit 05adaf1f upstream. Media force wake get hangs the machine when the system is booted without displays attached. The assumption is that (at least some versions of) the firmware has skipped some initialization in that case. Empirical evidence suggests we need to reset the media force wake request register in addition to the render one to avoid hangs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75895Reported-by:
Imre Deak <imre.deak@intel.com> Reported-by:
Darren Hart <dvhart@linux.intel.com> Tested-by:
Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Michael Welling authored
commit 99e4b98d upstream. The chips variable needs to be incremented for each chip that is found in the spi_present_mask when registering via device tree. Without this and the checking a negative index is passed to the data->chip array in a subsequent loop. Signed-off-by:
Michael Welling <mwelling@ieee.org> Acked-by:
Peter Korsgaard <peter@korsgaard.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Hui Wang authored
commit a1f3b5fa upstream. When we plug a 3-ring headset on the Dell machines (VID: 0x10ec0255, SID: 0x1028065c; VID: 0x10ec0255, SID: 0x10280680; VID: 0x10ec0292, SID: 0x10280684), the headset mic can't be detected, after apply this patch, the headset mic can work well. And on the machine with SID 0x10280684, and the Lineout and external microphone should be routed to docking, this patch also fix this problem. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kinglong Mee authored
commit aa07c713 upstream. After setting ACL for directory, I got two problems that caused by the cached zero-length default posix acl. This patch make sure nfsd4_set_nfs4_acl calls ->set_acl with a NULL ACL structure if there are no entries. Thanks for Christoph Hellwig's advice. First problem: ............ hang ........... Second problem: [ 1610.167668] ------------[ cut here ]------------ [ 1610.168320] kernel BUG at /root/nfs/linux/fs/nfsd/nfs4acl.c:239! [ 1610.168320] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 1610.168320] Modules linked in: nfsv4(OE) nfs(OE) nfsd(OE) rpcsec_gss_krb5 fscache ip6t_rpfilter ip6t_REJECT cfg80211 xt_conntrack rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw auth_rpcgss nfs_acl snd_intel8x0 ppdev lockd snd_ac97_codec ac97_bus snd_pcm snd_timer e1000 pcspkr parport_pc snd parport serio_raw joydev i2c_piix4 sunrpc(OE) microcode soundcore i2c_core ata_generic pata_acpi [last unloaded: nfsd] [ 1610.168320] CPU: 0 PID: 27397 Comm: nfsd Tainted: G OE 3.15.0-rc1+ #15 [ 1610.168320] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 1610.168320] task: ffff88005ab653d0 ti: ffff88005a944000 task.ti: ffff88005a944000 [ 1610.168320] RIP: 0010:[<ffffffffa034d5ed>] [<ffffffffa034d5ed>] _posix_to_nfsv4_one+0x3cd/0x3d0 [nfsd] [ 1610.168320] RSP: 0018:ffff88005a945b00 EFLAGS: 00010293 [ 1610.168320] RAX: 0000000000000001 RBX: ffff88006700bac0 RCX: 0000000000000000 [ 1610.168320] RDX: 0000000000000000 RSI: ffff880067c83f00 RDI: ffff880068233300 [ 1610.168320] RBP: ffff88005a945b48 R08: ffffffff81c64830 R09: 0000000000000000 [ 1610.168320] R10: ffff88004ea85be0 R11: 000000000000f475 R12: ffff880068233300 [ 1610.168320] R13: 0000000000000003 R14: 0000000000000002 R15: ffff880068233300 [ 1610.168320] FS: 0000000000000000(0000) GS:ffff880077800000(0000) knlGS:0000000000000000 [ 1610.168320] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1610.168320] CR2: 00007f5bcbd3b0b9 CR3: 0000000001c0f000 CR4: 00000000000006f0 [ 1610.168320] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1610.168320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1610.168320] Stack: [ 1610.168320] ffffffff00000000 0000000b67c83500 000000076700bac0 0000000000000000 [ 1610.168320] ffff88006700bac0 ffff880068233300 ffff88005a945c08 0000000000000002 [ 1610.168320] 0000000000000000 ffff88005a945b88 ffffffffa034e2d5 000000065a945b68 [ 1610.168320] Call Trace: [ 1610.168320] [<ffffffffa034e2d5>] nfsd4_get_nfs4_acl+0x95/0x150 [nfsd] [ 1610.168320] [<ffffffffa03400d6>] nfsd4_encode_fattr+0x646/0x1e70 [nfsd] [ 1610.168320] [<ffffffff816a6e6e>] ? kmemleak_alloc+0x4e/0xb0 [ 1610.168320] [<ffffffffa0327962>] ? nfsd_setuser_and_check_port+0x52/0x80 [nfsd] [ 1610.168320] [<ffffffff812cd4bb>] ? selinux_cred_prepare+0x1b/0x30 [ 1610.168320] [<ffffffffa0341caa>] nfsd4_encode_getattr+0x5a/0x60 [nfsd] [ 1610.168320] [<ffffffffa0341e07>] nfsd4_encode_operation+0x67/0x110 [nfsd] [ 1610.168320] [<ffffffffa033844d>] nfsd4_proc_compound+0x21d/0x810 [nfsd] [ 1610.168320] [<ffffffffa0324d9b>] nfsd_dispatch+0xbb/0x200 [nfsd] [ 1610.168320] [<ffffffffa00850cd>] svc_process_common+0x46d/0x6d0 [sunrpc] [ 1610.168320] [<ffffffffa0085433>] svc_process+0x103/0x170 [sunrpc] [ 1610.168320] [<ffffffffa032472f>] nfsd+0xbf/0x130 [nfsd] [ 1610.168320] [<ffffffffa0324670>] ? nfsd_destroy+0x80/0x80 [nfsd] [ 1610.168320] [<ffffffff810a5202>] kthread+0xd2/0xf0 [ 1610.168320] [<ffffffff810a5130>] ? insert_kthread_work+0x40/0x40 [ 1610.168320] [<ffffffff816c1ebc>] ret_from_fork+0x7c/0xb0 [ 1610.168320] [<ffffffff810a5130>] ? insert_kthread_work+0x40/0x40 [ 1610.168320] Code: 78 02 e9 e7 fc ff ff 31 c0 31 d2 31 c9 66 89 45 ce 41 8b 04 24 66 89 55 d0 66 89 4d d2 48 8d 04 80 49 8d 5c 84 04 e9 37 fd ff ff <0f> 0b 90 0f 1f 44 00 00 55 8b 56 08 c7 07 00 00 00 00 8b 46 0c [ 1610.168320] RIP [<ffffffffa034d5ed>] _posix_to_nfsv4_one+0x3cd/0x3d0 [nfsd] [ 1610.168320] RSP <ffff88005a945b00> [ 1610.257313] ---[ end trace 838254e3e352285b ]--- Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Igor Mammedov authored
commit 0b9d46dd upstream. acpi_processor_add() assumes that present at boot CPUs are always onlined, it is not so if a CPU failed to become onlined. As result acpi_processor_add() will mark such CPU device as onlined in sysfs and following attempts to online/offline it using /sys/device/system/cpu/cpuX/online attribute will fail. Do not poke into device internals in acpi_processor_add() and touch "struct device { .offline }" attribute, since for CPUs onlined at boot it's set by: topology_init() -> arch_register_cpu() -> register_cpu() before ACPI device tree is parsed, and for hotplugged CPUs it's set when userspace onlines CPU via sysfs. Signed-off-by:
Igor Mammedov <imammedo@redhat.com> Acked-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
-
Guenter Roeck authored
commit 98012849 upstream. Revert commit cc8ef527 (ACPI / AC: convert ACPI ac driver to platform bus) that is reported to break thermal management on MacBook Air 2013 with ArchLinux. Fixes: cc8ef527 (ACPI / AC: convert ACPI ac driver to platform bus) References: https://bugzilla.kernel.org/show_bug.cgi?id=71711 Cc: Zhang Rui <rui.zhang@intel.com> Reported-and-tested-by:
Manuel Krause <manuelkrause@netscape.net> Signed-off-by:
-
Hans de Goede authored
commit f6e6e1b9 upstream. Without this this EEE PC exports a non working WMI interface, with this it exports a working "good old" eeepc_laptop interface, fixing brightness control not working as well as rfkill being stuck in a permanent wireless blocked state. This is not an ideal way to fix this, but various attempts to fix this otherwise have failed, see: References: https://bugzilla.redhat.com/show_bug.cgi?id=1067181 Reported-and-tested-by: lou.cardone@gmail.com Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Edward Lin authored
commit b753631b upstream. With win8 capabiltiy, the machine will boot itself immediately after shutdown command has executed. Work around this issue by disabling win8 capcability. This workaround also makes wireless hotkey work. Signed-off-by:
Edward Lin <yidi.lin@canonical.com> Signed-off-by:
-
Levente Kurusa authored
commit a6f9bf4d upstream. When a ZPODD device is unbound via sysfs, the ACPI notify handler is not removed. This causes panics as observed in Bug #74601. The panic only happens when the wake happens from outside the kernel (i.e. inserting a media or pressing a button). Add a loop to ata_port_detach which loops through the port's devices and checks if zpodd is enabled, if so call zpodd_exit. Reviewed-by:
Aaron Lu <aaron.lu@intel.com> Signed-off-by:
Levente Kurusa <levex@linux.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 4c88d7f9 upstream. Patch 01f8fa4f "genirq: Allow forcing cpu affinity of interrupts" added an irq_force_affinity() function, and 30ccf03b "clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup" subsequently uses it. However, the driver can be used with CONFIG_SMP disabled, but the function declaration is only available for CONFIG_SMP, leading to this build error: drivers/clocksource/exynos_mct.c:431:3: error: implicit declaration of function 'irq_force_affinity' [-Werror=implicit-function-declaration] irq_force_affinity(mct_irqs[MCT_L0_IRQ + cpu], cpumask_of(cpu)); This patch introduces a dummy helper function for the non-SMP case that always returns success, to get rid of the build error. Since the patches causing the problem are marked for stable backports, this one should be as well. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by:
-
Trond Myklebust authored
commit 4cb57e30 upstream. Mainly to ensure that we don't leave any hanging timers. Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 5694c93e upstream. Aside from making it clearer what is non-trivial in create_client(), it also fixes a bug whereby we can call free_client() before idr_init() has been called. Signed-off-by:
-
Lan Tianyu authored
commit 3a670cc7 upstream. The commit 1e2d9cdf and 7d7ee958 remove ACPI Proc Battery directory and breaks some old userspace tools. This patch is to revert commit 1e2d9cdf. Fixes: 1e2d9cdf (ACPI / Battery: Remove battery's proc directory) Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
-
Lan Tianyu authored
commit e2a7c3d7 upstream. The commit 1e2d9cdf and 7d7ee958 remove ACPI Proc Battery directory and breaks some old userspace tools. This patch is to revert 7d7ee958. Fixes: 7d7ee958 (ACPI: Remove CONFIG_ACPI_PROCFS_POWER and cm_sbsc.c) Signed-off-by:
-
Paul Bolle authored
commit 7919010c upstream. Nothing cares about ACPI_PROCFS. This has been the case since v2.6.38. This Kconfig symbol serves no purpose and its help text is now misleading. It can safely be removed. If this symbol would be needed again in the future it can be readded in a commit that adds code that actually uses it. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
NeilBrown authored
commit 0f62fb22 upstream. If an md array with externally managed metadata (e.g. DDF or IMSM) is in use, then we should not set safemode==2 at shutdown because: 1/ this is ineffective: user-space need to be involved in any 'safemode' handling, 2/ The safemode management code doesn't cope with safemode==2 on external metadata and md_check_recover enters an infinite loop. Even at shutdown, an infinite-looping process can be problematic, so this could cause shutdown to hang. Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Aristeu Rozanski authored
commit d2c2b11c upstream. [PATCH v3 1/2] device_cgroup: check if exception removal is allowed When the device cgroup hierarchy was introduced in bd2953eb - devcg: propagate local changes down the hierarchy a specific case was overlooked. Consider the hierarchy bellow: A default policy: ALLOW, exceptions will deny access \ B default policy: ALLOW, exceptions will deny access There's no need to verify when an new exception is added to B because in this case exceptions will deny access to further devices, which is always fine. Hierarchy in device cgroup only makes sure B won't have more access than A. But when an exception is removed (by writing devices.allow), it isn't checked if the user is in fact removing an inherited exception from A, thus giving more access to B. Example: # echo 'a' >A/devices.allow # echo 'c 1:3 rw' >A/devices.deny # echo $$ >A/B/tasks # echo >/dev/null -bash: /dev/null: Operation not permitted # echo 'c 1:3 w' >A/B/devices.allow # echo >/dev/null # This shouldn't be allowed and this patch fixes it by making sure to never allow exceptions in this case to be removed if the exception is partially or fully present on the parent. v3: missing '*' in function description v2: improved log message and formatting fixes Cc: cgroups@vger.kernel.org Cc: Li Zefan <lizefan@huawei.com> Signed-off-by:
Aristeu Rozanski <arozansk@redhat.com> Acked-by:
Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by:
-
Sebastian Hesselbarth authored
commit 788296b2 upstream. Commit 54397d85 ("ARM: kirkwood: Relocate PCIe device tree nodes") moved the pcie-controller nodes for the Kirkwood SoCs to the mbus bus node. For some reason, two boards were not properly converted and have their pci-controller nodes still in the ocp bus node. As the corresponding SoC pcie-controller does not exist anymore, it is likely that pcie is broken on those boards since above commit. Fix it by moving the pcie related nodes to the correct location. Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Fixes: 54397d85 ("ARM: kirkwood: Relocate PCIe device tree nodes") Acked-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1398862602-29595-2-git-send-email-sebastian.hesselbarth@gmail.comSigned-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Salva Peiró authored
commit e6a62346 upstream. This fixes CVE-2014-1739. Signed-off-by:
Salva Peiró <speiro@ai2.upv.es> Acked-by:
-
Stephen Boyd authored
commit 293ba3b4 upstream. Now that clk_unregister() frees the struct clk we're unregistering we'll free memory twice: first we'll call kfree() in __clk_release() with an address kmalloc doesn't know about and second we'll call kfree() in the devres layer. Remove the allocation of struct clk in devm_clk_register() and let clk_release() handle it. This fixes slab errors like: ============================================================================= BUG kmalloc-128 (Not tainted): Invalid object pointer 0xed08e8d0 ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0xeec503f8 objects=25 used=15 fp=0xed08ea00 flags=0x4081 CPU: 2 PID: 73 Comm: rmmod Tainted: G B 3.14.0-11032-g526e9c764381 #34 [<c0014be0>] (unwind_backtrace) from [<c0012240>] (show_stack+0x10/0x14) [<c0012240>] (show_stack) from [<c04b74dc>] (dump_stack+0x70/0xbc) [<c04b74dc>] (dump_stack) from [<c00f6778>] (slab_err+0x74/0x84) [<c00f6778>] (slab_err) from [<c04b6278>] (free_debug_processing+0x2cc/0x31c) [<c04b6278>] (free_debug_processing) from [<c04b6300>] (__slab_free+0x38/0x41c) [<c04b6300>] (__slab_free) from [<c03931bc>] (clk_unregister+0xd4/0x140) [<c03931bc>] (clk_unregister) from [<c02fb774>] (release_nodes+0x164/0x1d8) [<c02fb774>] (release_nodes) from [<c02f8698>] (__device_release_driver+0x60/0xb0) [<c02f8698>] (__device_release_driver) from [<c02f9080>] (driver_detach+0xb4/0xb8) [<c02f9080>] (driver_detach) from [<c02f8480>] (bus_remove_driver+0x5c/0xc4) [<c02f8480>] (bus_remove_driver) from [<c008c9b8>] (SyS_delete_module+0x148/0x1d8) [<c008c9b8>] (SyS_delete_module) from [<c000ef80>] (ret_fast_syscall+0x0/0x48) FIX kmalloc-128: Object at 0xed08e8d0 not freed Fixes: fcb0ee6a (clk: Implement clk_unregister) Cc: Jiada Wang <jiada_wang@mentor.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Mike Turquette <mturquette@linaro.org> Signed-off-by:
-
