- 15 Sep, 2018 7 commits
-
-
Anthony Wong authored
[ Upstream commit 9fd0e09a ] This card identifies itself as: Ethernet controller [0200]: NCube Device [10ff:8168] (rev 06) Subsystem: TP-LINK Technologies Co., Ltd. Device [7470:3468] Adding a new entry to rtl8169_pci_tbl makes the card work. Link: http://launchpad.net/bugs/1788730Signed-off-by:
Anthony Wong <anthony.wong@ubuntu.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Manish Chopra authored
[ Upstream commit 6750c870 ] qlge_fix_features() is not supposed to modify hardware or driver state, rather it is supposed to only fix requested fetures bits. Currently qlge_fix_features() also goes for interface down and up unnecessarily if there is not even any change in features set. This patch changes/fixes following - 1) Move reload of interface or device re-config from qlge_fix_features() to qlge_set_features(). 2) Reload of interface in qlge_set_features() only if relevant feature bit (NETIF_F_HW_VLAN_CTAG_RX) is changed. 3) Get rid of qlge_fix_features() since driver is not really required to fix any features bit. Signed-off-by:
Manish <manish.chopra@cavium.com> Reviewed-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
-
Kees Cook authored
[ Upstream commit 98c8f125 ] Via u32_change(), TCA_U32_SEL has an unspecified type in the netlink policy, so max length isn't enforced, only minimum. This means nkeys (from userspace) was being trusted without checking the actual size of nla_len(), which could lead to a memory over-read, and ultimately an exposure via a call to u32_dump(). Reachability is CAP_NET_ADMIN within a namespace. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Anssi Hannula authored
[ Upstream commit 0da70f80 ] macb_reset_hw() is called from macb_close() and indirectly from macb_open(). macb_reset_hw() zeroes the NCR register, including the MPE (Management Port Enable) bit. This will prevent accessing any other PHYs for other Ethernet MACs on the MDIO bus, which remains registered at macb_reset_hw() time, until macb_init_hw() is called from macb_open() which sets the MPE bit again. I.e. currently the MDIO bus has a short disruption at open time and is disabled at close time until the interface is opened again. Fix that by only touching the RE and TE bits when enabling and disabling RX/TX. v2: Make macb_init_hw() NCR write a single statement. Fixes: 6c36a707 ("macb: Use generic PHY layer") Signed-off-by:
Anssi Hannula <anssi.hannula@bitwise.fi> Reviewed-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by:
-
Doug Berger authored
[ Upstream commit c3c397c1 ] When using the fixed PHY with GENET (e.g. MOCA) the PHY link status can be determined from the internal link status captured by the MAC. This allows the PHY state machine to use the correct link state with the fixed PHY even if MAC link event interrupts are missed when the net device is opened. Fixes: 8d88c6eb ("net: bcmgenet: enable MoCA link state change detection") Signed-off-by:
Doug Berger <opendmb@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 431280ee ] tcp uses per-cpu (and per namespace) sockets (net->ipv4.tcp_sk) internally to send some control packets. 1) RST packets, through tcp_v4_send_reset() 2) ACK packets in SYN-RECV and TIME-WAIT state, through tcp_v4_send_ack() These packets assert IP_DF, and also use the hashed IP ident generator to provide an IPv4 ID number. Geoff Alexander reported this could be used to build off-path attacks. These packets should not be fragmented, since their size is smaller than IPV4_MIN_MTU. Only some tunneled paths could eventually have to fragment, regardless of inner IPID. We really can use zero IPID, to address the flaw, and as a bonus, avoid a couple of atomic operations in ip_idents_reserve() Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Geoff Alexander <alexandg@cs.unm.edu> Tested-by:
-
Cong Wang authored
[ Upstream commit 6d784f16 ] Immediately after module_put(), user could delete this module, so e->ops could be already freed before we call e->ops->release(). Fix this by moving module_put() after ops->release(). Fixes: ef6980b6 ("introduce IFE action") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
- 09 Sep, 2018 33 commits
-
-
Greg Kroah-Hartman authored
-
James Morse authored
commit f52bb98f upstream. Commit 6d526ee2 ("arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA") only enabled HOLES_IN_ZONE for NUMA systems because the NUMA code was choking on the missing zone for nomap pages. This problem doesn't just apply to NUMA systems. If the architecture doesn't set HAVE_ARCH_PFN_VALID, pfn_valid() will return true if the pfn is part of a valid sparsemem section. When working with multiple pages, the mm code uses pfn_valid_within() to test each page it uses within the sparsemem section is valid. On most systems memory comes in MAX_ORDER_NR_PAGES chunks which all have valid/initialised struct pages. In this case pfn_valid_within() is optimised out. Systems where this isn't true (e.g. due to nomap) should set HOLES_IN_ZONE and provide HAVE_ARCH_PFN_VALID so that mm tests each page as it works with it. Currently non-NUMA arm64 systems can't enable HOLES_IN_ZONE, leading to a VM_BUG_ON(): | page:fffffdff802e1780 is uninitialized and poisoned | raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff | raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff | page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) | ------------[ cut here ]------------ | kernel BUG at include/linux/mm.h:978! | Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [...] | CPU: 1 PID: 25236 Comm: dd Not tainted 4.18.0 #7 | Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 | pstate: 40000085 (nZcv daIf -PAN -UAO) | pc : move_freepages_block+0x144/0x248 | lr : move_freepages_block+0x144/0x248 | sp : fffffe0071177680 [...] | Process dd (pid: 25236, stack limit = 0x0000000094cc07fb) | Call trace: | move_freepages_block+0x144/0x248 | steal_suitable_fallback+0x100/0x16c | get_page_from_freelist+0x440/0xb20 | __alloc_pages_nodemask+0xe8/0x838 | new_slab+0xd4/0x418 | ___slab_alloc.constprop.27+0x380/0x4a8 | __slab_alloc.isra.21.constprop.26+0x24/0x34 | kmem_cache_alloc+0xa8/0x180 | alloc_buffer_head+0x1c/0x90 | alloc_page_buffers+0x68/0xb0 | create_empty_buffers+0x20/0x1ec | create_page_buffers+0xb0/0xf0 | __block_write_begin_int+0xc4/0x564 | __block_write_begin+0x10/0x18 | block_write_begin+0x48/0xd0 | blkdev_write_begin+0x28/0x30 | generic_perform_write+0x98/0x16c | __generic_file_write_iter+0x138/0x168 | blkdev_write_iter+0x80/0xf0 | __vfs_write+0xe4/0x10c | vfs_write+0xb4/0x168 | ksys_write+0x44/0x88 | sys_write+0xc/0x14 | el0_svc_naked+0x30/0x34 | Code: aa1303e0 90001a01 91296421 94008902 (d4210000) | ---[ end trace 1601ba47f6e883fe ]--- Remove the NUMA dependency. Link: https://www.spinics.net/lists/arm-kernel/msg671851.html Cc: <stable@vger.kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Reviewed-by:
Pavel Tatashin <pavel.tatashin@microsoft.com> Tested-by:
James Morse <james.morse@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Jeremy Cline authored
commit 7b6924d9 upstream. 'type' is user-controlled, so sanitize it after the bounds check to avoid using it in speculative execution. This covers the following potential gadgets detected with the help of smatch: * fs/ext4/super.c:5741 ext4_quota_read() warn: potential spectre issue 'sb_dqopt(sb)->files' [r] * fs/ext4/super.c:5778 ext4_quota_write() warn: potential spectre issue 'sb_dqopt(sb)->files' [r] * fs/f2fs/super.c:1552 f2fs_quota_read() warn: potential spectre issue 'sb_dqopt(sb)->files' [r] * fs/f2fs/super.c:1608 f2fs_quota_write() warn: potential spectre issue 'sb_dqopt(sb)->files' [r] * fs/quota/dquot.c:412 mark_info_dirty() warn: potential spectre issue 'sb_dqopt(sb)->info' [w] * fs/quota/dquot.c:933 dqinit_needed() warn: potential spectre issue 'dquots' [r] * fs/quota/dquot.c:2112 dquot_commit_info() warn: potential spectre issue 'dqopt->ops' [r] * fs/quota/dquot.c:2362 vfs_load_quota_inode() warn: potential spectre issue 'dqopt->files' [w] (local cap) * fs/quota/dquot.c:2369 vfs_load_quota_inode() warn: potential spectre issue 'dqopt->ops' [w] (local cap) * fs/quota/dquot.c:2370 vfs_load_quota_inode() warn: potential spectre issue 'dqopt->info' [w] (local cap) * fs/quota/quota.c:110 quota_getfmt() warn: potential spectre issue 'sb_dqopt(sb)->info' [r] * fs/quota/quota_v2.c:84 v2_check_quota_file() warn: potential spectre issue 'quota_magics' [w] * fs/quota/quota_v2.c:85 v2_check_quota_file() warn: potential spectre issue 'quota_versions' [w] * fs/quota/quota_v2.c:96 v2_read_file_info() warn: potential spectre issue 'dqopt->info' [r] * fs/quota/quota_v2.c:172 v2_write_file_info() warn: potential spectre issue 'dqopt->info' [r] Additionally, a quick inspection indicates there are array accesses with 'type' in quota_on() and quota_off() functions which are also addressed by this. Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Jeremy Cline <jcline@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Horia Geantă authored
commit ad876a18 upstream. xts setkey callback returns 0 on some error paths. Fix this by returning -EINVAL. Cc: <stable@vger.kernel.org> # 4.12+ Fixes: b189817c ("crypto: caam/qi - add ablkcipher and authenc algorithms") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Horia Geantă authored
commit cc98963d upstream. Descriptor address needs to be swapped to CPU endianness before being DMA unmapped. Cc: <stable@vger.kernel.org> # 4.8+ Fixes: 261ea058 ("crypto: caam - handle core endianness != caam endianness") Reported-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by:
-
Horia Geantă authored
commit f1bf9e60 upstream. Crypto engine needs some temporary locations in external memory for running RSA decrypt forms 2 and 3 (CRT). These are named "tmp1" and "tmp2" in the PDB. Update DMA mapping direction of tmp1 and tmp2 from TO_DEVICE to BIDIRECTIONAL, since engine needs r/w access. Cc: <stable@vger.kernel.org> # 4.13+ Fixes: 52e26d77 ("crypto: caam - add support for RSA key form 2") Fixes: 4a651b12 ("crypto: caam - add support for RSA key form 3") Signed-off-by:
-
Ondrej Mosnacek authored
commit 0522236d upstream. This patch fixes sleep-in-atomic bugs in AES-CBC and AES-XTS VMX implementations. The problem is that the blkcipher_* functions should not be called in atomic context. The bugs can be reproduced via the AF_ALG interface by trying to encrypt/decrypt sufficiently large buffers (at least 64 KiB) using the VMX implementations of 'cbc(aes)' or 'xts(aes)'. Such operations then trigger BUG in crypto_yield(): [ 891.863680] BUG: sleeping function called from invalid context at include/crypto/algapi.h:424 [ 891.864622] in_atomic(): 1, irqs_disabled(): 0, pid: 12347, name: kcapi-enc [ 891.864739] 1 lock held by kcapi-enc/12347: [ 891.864811] #0: 00000000f5d42c46 (sk_lock-AF_ALG){+.+.}, at: skcipher_recvmsg+0x50/0x530 [ 891.865076] CPU: 5 PID: 12347 Comm: kcapi-enc Not tainted 4.19.0-0.rc0.git3.1.fc30.ppc64le #1 [ 891.865251] Call Trace: [ 891.865340] [c0000003387578c0] [c000000000d67ea4] dump_stack+0xe8/0x164 (unreliable) [ 891.865511] [c000000338757910] [c000000000172a58] ___might_sleep+0x2f8/0x310 [ 891.865679] [c000000338757990] [c0000000006bff74] blkcipher_walk_done+0x374/0x4a0 [ 891.865825] [c0000003387579e0] [d000000007e73e70] p8_aes_cbc_encrypt+0x1c8/0x260 [vmx_crypto] [ 891.865993] [c000000338757ad0] [c0000000006c0ee0] skcipher_encrypt_blkcipher+0x60/0x80 [ 891.866128] [c000000338757b10] [c0000000006ec504] skcipher_recvmsg+0x424/0x530 [ 891.866283] [c000000338757bd0] [c000000000b00654] sock_recvmsg+0x74/0xa0 [ 891.866403] [c000000338757c10] [c000000000b00f64] ___sys_recvmsg+0xf4/0x2f0 [ 891.866515] [c000000338757d90] [c000000000b02bb8] __sys_recvmsg+0x68/0xe0 [ 891.866631] [c000000338757e30] [c00000000000bbe4] system_call+0x5c/0x70 Fixes: 8c755ace ("crypto: vmx - Adding CBC routines for VMX module") Fixes: c07f5d3d ("crypto: vmx - Adding support for XTS") Cc: stable@vger.kernel.org Signed-off-by:
Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by:
-
Adrian Hunter authored
commit 99cbbe56 upstream. When the number of queues grows beyond 32, the array of queues is resized but not all members were being copied. Fix by also copying 'tid', 'cpu' and 'set'. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Fixes: e5027893 ("perf auxtrace: Add helpers for queuing AUX area tracing data") Link: http://lkml.kernel.org/r/20180814084608.6563-1-adrian.hunter@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Eddie.Horng authored
commit 355139a8 upstream. The code in cap_inode_getsecurity(), introduced by commit 8db6c34f ("Introduce v3 namespaced file capabilities"), should use d_find_any_alias() instead of d_find_alias() do handle unhashed dentry correctly. This is needed, for example, if execveat() is called with an open but unlinked overlayfs file, because overlayfs unhashes dentry on unlink. This is a regression of real life application, first reported at https://www.spinics.net/lists/linux-unionfs/msg05363.html Below reproducer and setup can reproduce the case. const char* exec="echo"; const char *newargv[] = { "echo", "hello", NULL}; const char *newenviron[] = { NULL }; int fd, err; fd = open(exec, O_PATH); unlink(exec); err = syscall(322/*SYS_execveat*/, fd, "", newargv, newenviron, AT_EMPTY_PATH); if(err<0) fprintf(stderr, "execveat: %s\n", strerror(errno)); gcc compile into ~/test/a.out mount -t overlay -orw,lowerdir=/mnt/l,upperdir=/mnt/u,workdir=/mnt/w none /mnt/m cd /mnt/m cp /bin/echo . ~/test/a.out Expected result: hello Actually result: execveat: Invalid argument dmesg: Invalid argument reading file caps for /dev/fd/3 The 2nd reproducer and setup emulates similar case but for regular filesystem: const char* exec="echo"; int fd, err; char buf[256]; fd = open(exec, O_RDONLY); unlink(exec); err = fgetxattr(fd, "security.capability", buf, 256); if(err<0) fprintf(stderr, "fgetxattr: %s\n", strerror(errno)); gcc compile into ~/test_fgetxattr cd /tmp cp /bin/echo . ~/test_fgetxattr Result: fgetxattr: Invalid argument On regular filesystem, for example, ext4 read xattr from disk and return to execveat(), will not trigger this issue, however, the overlay attr handler pass real dentry to vfs_getxattr() will. This reproducer calls fgetxattr() with an unlinked fd, involkes vfs_getxattr() then reproduced the case that d_find_alias() in cap_inode_getsecurity() can't find the unlinked dentry. Suggested-by:
Amir Goldstein <amir73il@gmail.com> Acked-by:
Serge E. Hallyn <serge@hallyn.com> Fixes: 8db6c34f ("Introduce v3 namespaced file capabilities") Cc: <stable@vger.kernel.org> # v4.14 Signed-off-by:
Eddie Horng <eddie.horng@mediatek.com> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Shan Hai authored
commit 3943b040 upstream. The writeback thread would exit with a lock held when the cache device is detached via sysfs interface, fix it by releasing the held lock before exiting the while-loop. Fixes: fadd94e0 (bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set) Signed-off-by:
Shan Hai <shan.hai@oracle.com> Signed-off-by:
Coly Li <colyli@suse.de> Tested-by:
Shenghui Wang <shhuiw@foxmail.com> Cc: stable@vger.kernel.org #4.17+ Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Vishal Verma authored
commit 286e8771 upstream. Commit efda1b5d ("acpi, nfit, libnvdimm: fix / harden ars_status output length handling") Introduced additional hardening for ambiguity in the ACPI spec for ars_status output sizing. However, it had a couple of cases mixed up. Where it should have been checking for (and returning) "out_field[1] - 4" it was using "out_field[1] - 8" and vice versa. This caused a four byte discrepancy in the buffer size passed on to the command handler, and in some cases, this caused memory corruption like: ./daxdev-errors.sh: line 76: 24104 Aborted (core dumped) ./daxdev-errors $busdev $region malloc(): memory corruption Program received signal SIGABRT, Aborted. [...] #5 0x00007ffff7865a2e in calloc () from /lib64/libc.so.6 #6 0x00007ffff7bc2970 in ndctl_bus_cmd_new_ars_status (ars_cap=ars_cap@entry=0x6153b0) at ars.c:136 #7 0x0000000000401644 in check_ars_status (check=0x7fffffffdeb0, bus=0x604c20) at daxdev-errors.c:144 #8 test_daxdev_clear_error (region_name=<optimized out>, bus_name=<optimized out>) at daxdev-errors.c:332 Cc: <stable@vger.kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Lukasz Dorau <lukasz.dorau@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Fixes: efda1b5d ("acpi, nfit, libnvdimm: fix / harden ars_status output length handling") Signed-off-by:
Vishal Verma <vishal.l.verma@intel.com> Reviewed-by:
Keith Busch <keith.busch@intel.com> Signed-of-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
-
Christian Brauner authored
commit 82c9a927 upstream. When running in a container with a user namespace, if you call getxattr with name = "system.posix_acl_access" and size % 8 != 4, then getxattr silently skips the user namespace fixup that it normally does resulting in un-fixed-up data being returned. This is caused by posix_acl_fix_xattr_to_user() being passed the total buffer size and not the actual size of the xattr as returned by vfs_getxattr(). This commit passes the actual length of the xattr as returned by vfs_getxattr() down. A reproducer for the issue is: touch acl_posix setfacl -m user:0:rwx acl_posix and the compile: #define _GNU_SOURCE #include <errno.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <unistd.h> #include <attr/xattr.h> /* Run in user namespace with nsuid 0 mapped to uid != 0 on the host. */ int main(int argc, void **argv) { ssize_t ret1, ret2; char buf1[128], buf2[132]; int fret = EXIT_SUCCESS; char *file; if (argc < 2) { fprintf(stderr, "Please specify a file with " "\"system.posix_acl_access\" permissions set\n"); _exit(EXIT_FAILURE); } file = argv[1]; ret1 = getxattr(file, "system.posix_acl_access", buf1, sizeof(buf1)); if (ret1 < 0) { fprintf(stderr, "%s - Failed to retrieve " "\"system.posix_acl_access\" " "from \"%s\"\n", strerror(errno), file); _exit(EXIT_FAILURE); } ret2 = getxattr(file, "system.posix_acl_access", buf2, sizeof(buf2)); if (ret2 < 0) { fprintf(stderr, "%s - Failed to retrieve " "\"system.posix_acl_access\" " "from \"%s\"\n", strerror(errno), file); _exit(EXIT_FAILURE); } if (ret1 != ret2) { fprintf(stderr, "The value of \"system.posix_acl_" "access\" for file \"%s\" changed " "between two successive calls\n", file); _exit(EXIT_FAILURE); } for (ssize_t i = 0; i < ret2; i++) { if (buf1[i] == buf2[i]) continue; fprintf(stderr, "Unexpected different in byte %zd: " "%02x != %02x\n", i, buf1[i], buf2[i]); fret = EXIT_FAILURE; } if (fret == EXIT_SUCCESS) fprintf(stderr, "Test passed\n"); else fprintf(stderr, "Test failed\n"); _exit(fret); } and run: ./tester acl_posix On a non-fixed up kernel this should return something like: root@c1:/# ./t Unexpected different in byte 16: ffffffa0 != 00 Unexpected different in byte 17: ffffff86 != 00 Unexpected different in byte 18: 01 != 00 and on a fixed kernel: root@c1:~# ./t Test passed Cc: stable@vger.kernel.org Fixes: 2f6f0654 ("userns: Convert vfs posix_acl support to use kuids and kgids") Link: https://bugzilla.kernel.org/show_bug.cgi?id=199945Reported-by:
Colin Watson <cjwatson@ubuntu.com> Signed-off-by:
Christian Brauner <christian@brauner.io> Acked-by:
-
Mikulas Patocka authored
commit bb24153a upstream. The default delay 5 jiffies is too much when the kernel is compiled with HZ=100 - it results in jumpy cursor in Xwindow. In order to find out the optimal delay, I benchmarked the driver on 1280x720x30fps video. I found out that with HZ=1000, 10ms is acceptable, but with HZ=250 or HZ=300, we need 4ms, so that the video is played without any frame skips. This patch changes the delay to this value. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Mikulas Patocka authored
commit 8c5b0442 upstream. I have a USB display adapter using the udlfb driver and I use it on an ARM board that doesn't have any graphics card. When I plug the adapter in, the console is properly displayed, however when I unplug and re-plug the adapter, the console is not displayed and I can't access it until I reboot the board. The reason is this: When the adapter is unplugged, dlfb_usb_disconnect calls unlink_framebuffer, then it waits until the reference count drops to zero and then it deallocates the framebuffer. However, the console that is attached to the framebuffer device keeps the reference count non-zero, so the framebuffer device is never destroyed. When the USB adapter is plugged again, it creates a new device /dev/fb1 and the console is not attached to it. This patch fixes the bug by unbinding the console from unlink_framebuffer. The code to unbind the console is moved from do_unregister_framebuffer to a function unbind_console. When the console is unbound, the reference count drops to zero and the udlfb driver frees the framebuffer. When the adapter is plugged back, a new framebuffer is created and the console is attached to it. Signed-off-by:
-
Vignesh R authored
commit 38dabd91 upstream. pwm-tiehrpwm driver disables PWM output by putting it in low output state via active AQCSFRC register in ehrpwm_pwm_disable(). But, the AQCSFRC shadow register is not updated. Therefore, when shadow AQCSFRC register is re-enabled in ehrpwm_pwm_enable() (say to enable second PWM output), previous settings are lost as shadow register value is loaded into active register. This results in things like PWMA getting enabled automatically, when PWMB is enabled and vice versa. Fix this by updating AQCSFRC shadow register as well during ehrpwm_pwm_disable(). Fixes: 19891b20 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM") Cc: stable@vger.kernel.org Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Vignesh R authored
commit aa49d628 upstream. As per AM335x TRM SPRUH73P "15.2.2.11 ePWM Behavior During Emulation", TBCTL[15:14] only have effect during emulation suspend events (IOW, to stop PWM when debugging using a debugger). These bits have no effect on PWM output during normal running of system. Hence, remove code accessing these bits as they have no role in enabling/disabling PWMs. Fixes: 19891b20 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM") Cc: stable@vger.kernel.org Signed-off-by:
-
Richard Weinberger authored
commit 59965593 upstream. In ubifs_jnl_update() we sync parent and child inodes to the flash, in case of xattrs, the parent inode (AKA host inode) has a non-zero data_len. Therefore we need to adjust synced_i_size too. This issue was reported by ubifs self tests unter a xattr related work load. UBIFS error (ubi0:0 pid 1896): dbg_check_synced_i_size: ui_size is 4, synced_i_size is 0, but inode is clean UBIFS error (ubi0:0 pid 1896): dbg_check_synced_i_size: i_ino 65, i_mode 0x81a4, i_size 4 Cc: <stable@vger.kernel.org> Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Richard Weinberger authored
commit 11a6fc3d upstream. xattr operations can race with unlink and the following assert triggers: UBIFS assert failed in ubifs_jnl_change_xattr at 1606 (pid 6256) Fix this by checking i_nlink before working on the host inode. Cc: <stable@vger.kernel.org> Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
-
Richard Weinberger authored
commit 95a22d20 upstream. Check whether the size is within bounds before using it. If the size is not correct, abort and dump the bad data node. Cc: Kees Cook <keescook@chromium.org> Cc: Silvio Cesare <silvio.cesare@gmail.com> Cc: stable@vger.kernel.org Fixes: 1e51764a ("UBIFS: add new flash file system") Reported-by:
Silvio Cesare <silvio.cesare@gmail.com> Signed-off-by:
-
Richard Weinberger authored
commit 08acbdd6 upstream. This reverts commit 353748a3. It bypassed the linux-mtd review process and fixes the issue not as it should. Cc: Kees Cook <keescook@chromium.org> Cc: Silvio Cesare <silvio.cesare@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Richard Weinberger authored
commit eef19816 upstream. Allocate the buffer after we return early. Otherwise memory is being leaked. Cc: <stable@vger.kernel.org> Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
-
Jann Horn authored
commit 5820f140 upstream. The old code would hold the userns_state_mutex indefinitely if memdup_user_nul stalled due to e.g. a userfault region. Prevent that by moving the memdup_user_nul in front of the mutex_lock(). Note: This changes the error precedence of invalid buf/count/*ppos vs map already written / capabilities missing. Fixes: 22d917d8 ("userns: Rework the user_namespace adding uid/gid...") Cc: stable@vger.kernel.org Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
-
Jann Horn authored
commit 42a0cc34 upstream. Holding uts_sem as a writer while accessing userspace memory allows a namespace admin to stall all processes that attempt to take uts_sem. Instead, move data through stack buffers and don't access userspace memory while uts_sem is held. Cc: stable@vger.kernel.org Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Jacob Pan authored
commit 1c48db44 upstream. PFSID should be used in the invalidation descriptor for flushing device IOTLBs on SRIOV VFs. Signed-off-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: stable@vger.kernel.org Cc: "Ashok Raj" <ashok.raj@intel.com> Cc: "Lu Baolu" <baolu.lu@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Jacob Pan authored
commit 0f725561 upstream. When SRIOV VF device IOTLB is invalidated, we need to provide the PF source ID such that IOMMU hardware can gauge the depth of invalidation queue which is shared among VFs. This is needed when device invalidation throttle (DIT) capability is supported. This patch adds bit definitions for checking and tracking PFSID. Signed-off-by:
-
Peter Zijlstra authored
commit a6f57208 upstream. Will noted that only checking mm_users is incorrect; we should also check mm_count in order to cover CPUs that have a lazy reference to this mm (and could do speculative TLB operations). If removing this turns out to be a performance issue, we can re-instate a more complete check, but in tlb_table_flush() eliding the call_rcu_sched(). Fixes: 26723911 ("mm, powerpc: move the RCU page-table freeing into generic code") Reported-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Rik van Riel <riel@surriel.com> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jon Hunter authored
commit 6e181190 upstream. On all versions of Tegra30 Cardhu, the reset signal to the NXP PCA9546 I2C mux is connected to the Tegra GPIO BB0. Currently, this pin on the Tegra is not configured as a GPIO but as a special-function IO (SFIO) that is multiplexing the pin to an I2S controller. On exiting system suspend, I2C commands sent to the PCA9546 are failing because there is no ACK. Although it is not possible to see exactly what is happening to the reset during suspend, by ensuring it is configured as a GPIO and driven high, to de-assert the reset, the failures are no longer seen. Please note that this GPIO is also used to drive the reset signal going to the camera connector on the board. However, given that there is no camera support currently for Cardhu, this should not have any impact. Fixes: 40431d16 ("ARM: tegra: enable PCA9546 on Cardhu") Cc: stable@vger.kernel.org Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Trond Myklebust authored
commit 8618289c upstream. We must drop the lock before we can sleep in referring_call_exists(). Reported-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Fixes: 045d2a6d ("NFSv4.1: Delay callback processing...") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Trond Myklebust authored
commit d0fbb1d8 upstream. The use of the inode->i_lock was converted to a mutex, but we forgot to remove the old inode unlock/lock() pair that allowed the layout segment to be put inside the loop. Reported-by:
-
Bill Baker authored
commit 0f90be13 upstream. After a live data migration event at the NFS server, the client may send I/O requests to the wrong server, causing a live hang due to repeated recovery events. On the wire, this will appear as an I/O request failing with NFS4ERR_BADSESSION, followed by successful CREATE_SESSION, repeatedly. NFS4ERR_BADSSESSION is returned because the session ID being used was issued by the other server and is not valid at the old server. The failure is caused by async worker threads having cached the transport (xprt) in the rpc_task structure. After the migration recovery completes, the task is redispatched and the task resends the request to the wrong server based on the old value still present in tk_xprt. The solution is to recompute the tk_xprt field of the rpc_task structure so that the request goes to the correct server. Signed-off-by:
Bill Baker <bill.baker@oracle.com> Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
Helen Chao <helen.chao@oracle.com> Fixes: fb43d172 ("SUNRPC: Use the multipath iterator to assign a ...") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by:
-
Dan Carpenter authored
commit 0914bb96 upstream. "dev->nr_children" is the number of children which were parsed successfully in bl_parse_stripe(). It could be all of them and then, in that case, it is equal to v->stripe.volumes_count. Either way, the > should be >= so that we don't go beyond the end of what we're supposed to. Fixes: 5c83746a ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org # 3.17+ Signed-off-by:
-
Maciej S. Szmigiero authored
commit fc8ebd01 upstream. The value that struct cftype .write() method returns is then directly returned to userspace as the value returned by write() syscall, so it should be the number of bytes actually written (or consumed) and not zero. Returning zero from write() syscall makes programs like /bin/echo or bash spin. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Fixes: e21b7a0b ("block, bfq: add full hierarchical scheduling and cgroups support") Cc: stable@vger.kernel.org Signed-off-by:
-
Max Filippov authored
commit fec3259c upstream. Cache invalidation macros use cache line size to iterate over invalidated cache lines, assuming that all cache ways are invalidated by single instruction, but xtensa ISA recommends to not assume that for future compatibility: In some implementations all ways at index Addry-1..z are invalidated regardless of the specified way, but for future compatibility this behavior should not be assumed. Iterate over all cache ways in ___invalidate_icache_all and ___invalidate_dcache_all. Cc: stable@vger.kernel.org Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
