Pull powerpc fixes friom Michael Ellerman:
 "Apologies for the late pull request, but Ben has been busy finding bugs.

   - Userspace was semi-randomly segfaulting on radix due to us
     incorrectly handling a fault triggered by autonuma, caused by a
     patch we merged earlier in v4.10 to prevent the kernel executing
     userspace.

   - We weren't marking host IPIs properly for KVM in the OPAL ICP
     backend.

   - The ERAT flushing on radix was missing an isync and was incorrectly
     marked as DD1 only.

   - The powernv CPU hotplug code was missing a wakeup type and failing
     to flush the interrupt correctly when using OPAL ICP

  Thanks to Benjamin Herrenschmidt"

* tag 'powerpc-4.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: Properly set "host-ipi" on IPIs
  powerpc/powernv: Fix CPU hotplug to handle waking on HVI
  powerpc/mm/radix: Update ERAT flushes when invalidating TLB
  powerpc/mm: Fix spurrious segfaults on radix with autonuma

Pull drm fixes from Dave Airlie:
 "This should be the final set of drm fixes for 4.10: one vmwgfx boot
  fix, one vc4 fix, and a few i915 fixes:

* tag 'drm-fixes-for-v4.10-rc8' of git://people.freedesktop.org/~airlied/linux:
  drm: vc4: adapt to new behaviour of drm_crtc.c
  drm/i915: Always convert incoming exec offsets to non-canonical
  drm/i915: Remove overzealous fence warn on runtime suspend
  drm/i915/bxt: Add MST support when do DPLL calculation
  drm/i915: don't warn about Skylake CPU - KabyPoint PCH combo
  drm/i915: fix i915 running as dom0 under Xen
  drm/i915: Flush untouched framebuffers before display on !llc
  drm/i915: fix use-after-free in page_flip_completed()
  drm/vmwgfx: Fix depth input into drm_mode_legacy_fb_format

Merge tag 'drm-intel-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes

Hopefully final fixes for v4.10, about half of them stable material.

* tag 'drm-intel-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Always convert incoming exec offsets to non-canonical
  drm/i915: Remove overzealous fence warn on runtime suspend
  drm/i915/bxt: Add MST support when do DPLL calculation
  drm/i915: don't warn about Skylake CPU - KabyPoint PCH combo
  drm/i915: fix i915 running as dom0 under Xen
  drm/i915: Flush untouched framebuffers before display on !llc
  drm/i915: fix use-after-free in page_flip_completed()

Last-minute vc4 fix for 4.10.

* tag 'drm-misc-fixes-2017-02-09' of git://anongit.freedesktop.org/git/drm-misc:
  drm: vc4: adapt to new behaviour of drm_crtc.c

Pull SCSI target fixes from Nicholas Bellinger:
 "This target series for v4.10 contains fixes which address a few
  long-standing bugs that DATERA's QA + automation teams have uncovered
  while putting v4.1.y target code into production usage.

  We've been running the top three in our nightly automated regression
  runs for the last two months, and the COMPARE_AND_WRITE fix Mr. Gary
  Guo has been manually verifying against a four node ESX cluster this
  past week.

  Note all of them have CC' stable tags.

  Summary:

   - Fix a bug with ESX EXTENDED_COPY + SAM_STAT_RESERVATION_CONFLICT
     status, where target_core_xcopy.c logic was incorrectly returning
     SAM_STAT_CHECK_CONDITION for all non SAM_STAT_GOOD cases (Nixon
     Vincent)

   - Fix a TMR LUN_RESET hung task bug while other in-flight TMRs are
     being aborted, before the new one had been dispatched into tmr_wq
     (Rob Millner)

   - Fix a long standing double free OOPs, where a dynamically generated
     'demo-mode' NodeACL has multiple sessions associated with it, and
     the /sys/kernel/config/target/$FABRIC/$WWN/ subsequently disables
     demo-mode, but never converts the dynamic ACL into a explicit ACL
     (Rob Millner)

   - Fix a long standing reference leak with ESX VAAI COMPARE_AND_WRITE
     when the second phase WRITE COMMIT command fails, resulting in
     CHECK_CONDITION response never being sent and se_cmd->cmd_kref
     never reaching zero (Gary Guo)

  Beyond these items on v4.1.y we've reproduced, fixed, and run through
  our regression test suite using iscsi-target exports, there are two
  additional outstanding list items:

   - Remove a >= v4.2 RCU conversion BUG_ON that would trigger when
     dynamic node NodeACLs where being converted to explicit NodeACLs.
     The patch drops the BUG_ON to follow how pre RCU conversion worked
     for this special case (Benjamin Estrabaud)

   - Add ibmvscsis target_core_fabric_ops->max_data_sg_nent assignment
     to match what IBM's Virtual SCSI hypervisor is already enforcing at
     transport layer. (Bryant Ly + Steven Royer)"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  ibmvscsis: Add SGL limit
  target: Fix COMPARE_AND_WRITE ref leak for non GOOD status
  target: Fix multi-session dynamic se_node_acl double free OOPs
  target: Fix early transport_generic_handle_tmr abort scenario
  target: Use correct SCSI status during EXTENDED_COPY exception
  target: Don't BUG_ON during NodeACL dynamic -> explicit conversion

Pull pstore fix from Kees Cook:
 "Fix pstore regression (boot Oops) when ftrace disabled, from Brian
  Norris"

* tag 'pstore-v4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: don't OOPS when there are no ftrace zones

Pull input fixes from Dmitry Torokhov:
 "A fix for a crash in uinput, and a fix for build errors when HID-RMI
  is built-in but SERIO is a module"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - select 'SERIO' when needed
  Input: uinput - fix crash when mixing old and new init style

We'll OOPS in ramoops_get_next_prz() if the platform didn't ask for any
ftrace zones (i.e., cxt->fprzs will be NULL). Let's just skip this
entire FTRACE section if there's no 'fprzs'.

Regression seen on a coreboot/depthcharge-based Chromebook.

Fixes: 2fbea82b ("pstore: Merge per-CPU ftrace records into one")
Cc: Joel Fernandes <joelaf@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>

Pull VFIO fix from Alex Williamson:
 "Fix regression in attaching groups to existing container for SPAPR
  IOMMU backend (Alexey Kardashevskiy)"

* tag 'vfio-v4.10-final' of git://github.com/awilliam/linux-vfio:
  vfio/spapr_tce: Set window when adding additional groups to container

Pull ARM fixes from Russell King:
 "A couple more fixes for 4.10:

   - fix addressing the short regset write issue (Dave Martin)

   - fix for LPAE systems which leave a pending imprecise data abort
     before entering the kernel (Alexander Sverdlin)"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8643/3: arm/ptrace: Preserve previous registers for short regset write
  ARM: 8642/1: LPAE: catch pending imprecise abort on unmask

Otherwise KVM will fail to pass them through to the host
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The IPIs come in as HVI not EE, so we need to test the appropriate
SRR1 bits. The encoding is such that it won't have false positives
on P7 and P8 so we can just test it like that. We also need to handle
the icp-opal variant of the flush.

Fixes: d7436188 ("powerpc/xics: Add ICP OPAL backend")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Three tiny changes to the ERAT flushing logic: First don't make
it depend on DD1. It hasn't been decided yet but we might run
DD2 in a mode that also requires explicit flushes for performance
reasons so make it unconditional. We also add a missing isync, and
finally remove the flush from _tlbiel_va as it is only necessary
for congruence-class invalidations (PID, LPID and full TLB), not
targetted invalidations.

Fixes: 96ed1fe5 ("powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This reverts commit 020eb3da.

Gabriel C reports that it causes his machine to not boot, and we haven't
tracked down the reason for it yet.  Since the bug it fixes has been
around for a longish time, we're better off reverting the fix for now.

Gabriel says:
 "It hangs early and freezes with a lot RCU warnings.

  I bisected it down to :

  > Ruslan Ruslichenko (1):
  >       x86/ioapic: Restore IO-APIC irq_chip retrigger callback

  Reverting this one fixes the problem for me..

  The box is a PRIMERGY TX200 S5 , 2 socket , 2 x E5520 CPU(s) installed"

and Ruslan and Thomas are currently stumped.
Reported-and-bisected-by: Gabriel C <nix.or.die@gmail.com>
Cc: Ruslan Ruslichenko <rruslich@cisco.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org   # for the backport of the original commit
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 2cc75154.

With this commit in place I get on a Cavium ThunderX (arm64) system:

$ if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v > rng-bad.txt
1+0 records in
1+0 records out
256 bytes (256 B) copied, 9.1171e-05 s, 2.8 MB/s
$ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v >> rng-bad.txt
1+0 records in
1+0 records out
256 bytes (256 B) copied, 9.6141e-05 s, 2.7 MB/s
$ cat rng-bad.txt
000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000050 00 00 00 00 37 20 46 ae d0 fc 1c 55 25 6e b0 b8
000060 7c 7e d7 d4 00 0f 6f b2 91 1e 30 a8 fa 3e 52 0e
000070 06 2d 53 30 be a1 20 0f aa 56 6e 0e 44 6e f4 35
000080 b7 6a fe d2 52 70 7e 58 56 02 41 ea d1 9c 6a 6a
000090 d1 bd d8 4c da 35 45 ef 89 55 fc 59 d5 cd 57 ba
0000a0 4e 3e 02 1c 12 76 43 37 23 e1 9f 7a 9f 9e 99 24
0000b0 47 b2 de e3 79 85 f6 55 7e ad 76 13 4f a0 b5 41
0000c0 c6 92 42 01 d9 12 de 8f b4 7b 6e ae d7 24 fc 65
0000d0 4d af 0a aa 36 d9 17 8d 0e 8b 7a 3b b6 5f 96 47
0000e0 46 f7 d8 ce 0b e8 3e c6 13 a6 2c b6 d6 cc 17 26
0000f0 e3 c3 17 8e 9e 45 56 1e 41 ef 29 1a a8 65 c8 3a
000100
000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000050 00 00 00 00 f4 90 65 aa 8b f2 5e 31 01 53 b4 d4
000060 06 c0 23 a2 99 3d 01 e4 b0 c1 b1 55 0f 80 63 cf
000070 33 24 d8 3a 1d 5e cd 2c ba c0 d0 18 6f bc 97 46
000080 1e 19 51 b1 90 15 af 80 5e d1 08 0d eb b0 6c ab
000090 6a b4 fe 62 37 c5 e1 ee 93 c3 58 78 91 2a d5 23
0000a0 63 50 eb 1f 3b 84 35 18 cf b2 a4 b8 46 69 9e cf
0000b0 0c 95 af 03 51 45 a8 42 f1 64 c9 55 fc 69 76 63
0000c0 98 9d 82 fa 76 85 24 da 80 07 29 fe 4e 76 0c 61
0000d0 ff 23 94 4f c8 5c ce 0b 50 e8 31 bc 9d ce f4 ca
0000e0 be ca 28 da e6 fa cc 64 1c ec a8 41 db fe 42 bd
0000f0 a0 e2 4b 32 b4 52 ba 03 70 8e c1 8e d0 50 3a c6
000100

To my untrained mental entropy detector, the first several bytes of
each read from /dev/hwrng seem to not be very random (i.e. all zero).

When I revert the patch (apply this patch), I get back to what we have
in v4.9, which looks like (much more random appearing):

$ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v > rng-good.txt
1+0 records in
1+0 records out
256 bytes (256 B) copied, 0.000252233 s, 1.0 MB/s
$ dd if=/dev/hwrng bs=256 count=1 | od -t x1 -A x -v >> rng-good.txt
1+0 records in
1+0 records out
256 bytes (256 B) copied, 0.000113571 s, 2.3 MB/s
$ cat rng-good.txt
000000 75 d1 2d 19 68 1f d2 26 a1 49 22 61 66 e8 09 e5
000010 e0 4e 10 d0 1a 2c 45 5d 59 04 79 8e e2 b7 2c 2e
000020 e8 ad da 34 d5 56 51 3d 58 29 c7 7a 8e ed 22 67
000030 f9 25 b9 fb c6 b7 9c 35 1f 84 21 35 c1 1d 48 34
000040 45 7c f6 f1 57 63 1a 88 38 e8 81 f0 a9 63 ad 0e
000050 be 5d 3e 74 2e 4e cb 36 c2 01 a8 14 e1 38 e1 bb
000060 23 79 09 56 77 19 ff 98 e8 44 f3 27 eb 6e 0a cb
000070 c9 36 e3 2a 96 13 07 a0 90 3f 3b bd 1d 04 1d 67
000080 be 33 14 f8 02 c2 a4 02 ab 8b 5b 74 86 17 f0 5e
000090 a1 d7 aa ef a6 21 7b 93 d1 85 86 eb 4e 8c d0 4c
0000a0 56 ac e4 45 27 44 84 9f 71 db 36 b9 f7 47 d7 b3
0000b0 f2 9c 62 41 a3 46 2b 5b e3 80 63 a4 35 b5 3c f4
0000c0 bc 1e 3a ad e4 59 4a 98 6c e8 8d ff 1b 16 f8 52
0000d0 05 5c 2f 52 2a 0f 45 5b 51 fb 93 97 a4 49 4f 06
0000e0 f3 a0 d1 1e ba 3d ed a7 60 8f bb 84 2c 21 94 2d
0000f0 b3 66 a6 61 1e 58 30 24 85 f8 c8 18 c3 77 00 22
000100
000000 73 ca cc a1 d9 bb 21 8d c3 5c f3 ab 43 6d a7 a4
000010 4a fd c5 f4 9c ba 4a 0f b1 2e 19 15 4e 84 26 e0
000020 67 c9 f2 52 4d 65 1f 81 b7 8b 6d 2b 56 7b 99 75
000030 2e cd d0 db 08 0c 4b df f3 83 c6 83 00 2e 2b b8
000040 0f af 61 1d f2 02 35 74 b5 a4 6f 28 f3 a1 09 12
000050 f2 53 b5 d2 da 45 01 e5 12 d6 46 f8 0b db ed 51
000060 7b f4 0d 54 e0 63 ea 22 e2 1d d0 d6 d0 e7 7e e0
000070 93 91 fb 87 95 43 41 28 de 3d 8b a3 a8 8f c4 9e
000080 30 95 12 7a b2 27 28 ff 37 04 2e 09 7c dd 7c 12
000090 e1 50 60 fb 6d 5f a8 65 14 40 89 e3 4c d2 87 8f
0000a0 34 76 7e 66 7a 8e 6b a3 fc cf 38 52 2e f9 26 f0
0000b0 98 63 15 06 34 99 b2 88 4f aa d8 14 88 71 f1 81
0000c0 be 51 11 2b f4 7e a0 1e 12 b2 44 2e f6 8d 84 ea
0000d0 63 82 2b 66 b3 9a fd 08 73 5a c2 cc ab 5a af b1
0000e0 88 e3 a6 80 4b fc db ed 71 e0 ae c0 0a a4 8c 35
0000f0 eb 89 f9 8a 4b 52 59 6f 09 7c 01 3f 56 e7 c7 bf
000100
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge fixes from Andrew Morton:
 "4 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/slub.c: fix random_seq offset destruction
  cpumask: use nr_cpumask_bits for parsing functions
  mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers
  kernel/ucount.c: mark user_header with kmemleak_ignore()

Commit 210e7a43 ("mm: SLUB freelist randomization") broke USB hub
initialisation as described in

  https://bugzilla.kernel.org/show_bug.cgi?id=177551.

Bail out early from init_cache_random_seq if s->random_seq is already
initialised.  This prevents destroying the previously computed
random_seq offsets later in the function.

If the offsets are destroyed, then shuffle_freelist will truncate
page->freelist to just the first object (orphaning the rest).

Fixes: 210e7a43 ("mm: SLUB freelist randomization")
Link: http://lkml.kernel.org/r/20170207140707.20824-1-sean@erifax.orgSigned-off-by: Sean Rees <sean@erifax.org>
Reported-by: <userwithuid@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 513e3d2d ("cpumask: always use nr_cpu_ids in formatting and
parsing functions") converted both cpumask printing and parsing
functions to use nr_cpu_ids instead of nr_cpumask_bits.  While this was
okay for the printing functions as it just picked one of the two output
formats that we were alternating between depending on a kernel config,
doing the same for parsing wasn't okay.

nr_cpumask_bits can be either nr_cpu_ids or NR_CPUS.  We can always use
nr_cpu_ids but that is a variable while NR_CPUS is a constant, so it can
be more efficient to use NR_CPUS when we can get away with it.
Converting the printing functions to nr_cpu_ids makes sense because it
affects how the masks get presented to userspace and doesn't break
anything; however, using nr_cpu_ids for parsing functions can
incorrectly leave the higher bits uninitialized while reading in these
masks from userland.  As all testing and comparison functions use
nr_cpumask_bits which can be larger than nr_cpu_ids, the parsed cpumasks
can erroneously yield false negative results.

This made the taskstats interface incorrectly return -EINVAL even when
the inputs were correct.

Fix it by restoring the parse functions to use nr_cpumask_bits instead
of nr_cpu_ids.

Link: http://lkml.kernel.org/r/20170206182442.GB31078@htj.duckdns.org
Fixes: 513e3d2d ("cpumask: always use nr_cpu_ids in formatting and parsing functions")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Martin Steigerwald <martin.steigerwald@teamix.de>
Debugged-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: <stable@vger.kernel.org>	[4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return
code (GFS2 or Lustre can definitely do this).  However VM_FAULT_RETRY
from ->page_mkwrite is completely unhandled by the mm code and results
in locking and writeably mapping the page which definitely is not what
the caller wanted.

Fix Lustre and block_page_mkwrite_ret() used by other filesystems
(notably GFS2) to return VM_FAULT_NOPAGE instead which results in
bailing out from the fault code, the CPU then retries the access, and we
fault again effectively doing what the handler wanted.

Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.czSigned-off-by: Jan Kara <jack@suse.cz>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The user_header gets caught by kmemleak with the following splat as
missing a free:

  unreferenced object 0xffff99667a733d80 (size 96):
  comm "swapper/0", pid 1, jiffies 4294892317 (age 62191.468s)
  hex dump (first 32 bytes):
    a0 b6 92 b4 ff ff ff ff 00 00 00 00 01 00 00 00  ................
    01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
     kmemleak_alloc+0x4a/0xa0
     __kmalloc+0x144/0x260
     __register_sysctl_table+0x54/0x5e0
     register_sysctl+0x1b/0x20
     user_namespace_sysctl_init+0x17/0x34
     do_one_initcall+0x52/0x1a0
     kernel_init_freeable+0x173/0x200
     kernel_init+0xe/0x100
     ret_from_fork+0x2c/0x40

The BUG_ON()s are intended to crash so no need to clean up after
ourselves on error there.  This is also a kernel/ subsys_init() we don't
need a respective exit call here as this is never modular, so just white
list it.

Link: http://lkml.kernel.org/r/20170203211404.31458-1-mcgrof@kernel.orgSigned-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nikolay Borisov <n.borisov.lkml@gmail.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When drm_crtc_init_with_planes() was orignally added
(in drm_crtc.c, e13161af
drm: Add drm_crtc_init_with_planes() (v2)), it only checked for "primary"
being non-null. If that was the case, it modified primary->possible_crtcs.

Then, when support for cursor planes was added
(fc1d3e44 drm: Allow drivers to register
cursor planes with crtc), the same behaviour was implemented for cursor
planes.

vc4_plane_init() since its inception has passed 0xff as "possible_crtcs"
parameter to drm_universal_plane_init(). With a change in drm_crtc.c
(7abc7d47 drm: don't override
possible_crtcs for primary/cursor planes) passing 0xff results in primary's
possible_crtcs set to 0xff (cursor was updated manually by vc4_crtc.c).
Consequently, it would be allowed to use the primary plane from CRTC 1 (for
example) on CRTC 0, which would result in the overlay and cursors being
buried.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1485941708-27892-1-git-send-email-andrzej.p@samsung.com
Fixes: 7abc7d47 ("drm: don't override possible_crtcs for primary/cursor planes")

Pull PCI fixes from Bjorn Helgaas:

 - check MSI affinity vs. number of vectors to avoid memory corruption

 - drop runtime power management for PCIe hotplug ports for now to avoid
   regressing hotplug via sysfs

* tag 'pci-v4.10-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI: pciehp: Add runtime PM support for PCIe hotplug ports"
  PCI/MSI: Don't apply affinity if there aren't enough vectors left

This patch adds internal LIO sgl limit since the driver already
sets a max transfer limit on transport layer of 1MB to the client.

Cc: stable@vger.kernel.org
Tested-by: Steven Royer <seroyer@linux.vnet.ibm.com>
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Pull ARM SoC fixes from Arnd Bergmann:

 - A relatively large patch restores booting on i.MX platforms that
   failed to boot after a cleanup was merged for v4.10.

 - A quirk for USB needs to be enabled on the STi platform

 - On the Meson platform, we saw memory corruption with part of the
   memory used by the secure monitor, so we have to stay out of that
   area.

 - The same platform also has a problem with ethernet under load, which
   is fixed by disabling EEE negotiation.

 - imx6dl has an incorrect pin configuration, which prevents SPI from
   working.

 - Two maintainers have lost their access to their email addresses, so
   we should update the MAINTAINERS file before the release

 - Renaming one of the orion5x linkstation models to help simplify the
   debian install.

 - A couple of fixes for build warnings that were introduced during
   v4.10-rc.

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: defconfigs: make NF_CT_PROTO_SCTP and NF_CT_PROTO_UDPLITE built-in
  MAINTAINERS: socfpga: update email for Dinh Nguyen
  ARM: orion5x: fix Makefile for linkstation-lschl.dtb
  ARM: dts: orion5x-lschl: More consistent naming on linkstation series
  ARM: dts: orion5x-lschl: Fix model name
  MAINTAINERS: change email address from atmel to microchip
  MAINTAINERS: at91: change email address
  ARM64: dts: meson-gx: Add firmware reserved memory zones
  ARM64: dts: meson-gxbb-odroidc2: fix GbE tx link breakage
  ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk
  ARM: dts: imx: Pass 'chosen' and 'memory' nodes
  ARM: dts: imx6dl: fix GPIO4 range
  ARM: imx: hide unused variable in #ifdef

Pull selinux fix from James Morris:
 "Fix off-by-one in setprocattr"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  selinux: fix off-by-one in setprocattr

Pull block fix from Jens Axboe:
 "A single fix that should go into 4.10, fixing a regression on some
  devices with the WRITE_SAME command"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: don't try Write Same from __blkdev_issue_zeroout

This patch addresses a long standing bug where the commit phase
of COMPARE_AND_WRITE would result in a se_cmd->cmd_kref reference
leak if se_cmd->scsi_status returned non SAM_STAT_GOOD.

This would manifest first as a lost SCSI response, and eventual
hung task during fabric driver logout or re-login, as existing
shutdown logic waited for the COMPARE_AND_WRITE se_cmd->cmd_kref
to reach zero.

To address this bug, compare_and_write_post() has been changed
to drop the incorrect !cmd->scsi_status conditional that was
preventing *post_ret = 1 for being set during non SAM_STAT_GOOD
status.

This patch has been tested with SAM_STAT_CHECK_CONDITION status
from normal target_complete_cmd() callback path, as well as the
incoming __target_execute_cmd() submission failure path when
se_cmd->execute_cmd() returns non zero status.
Reported-by: Donald White <dew@datera.io>
Cc: Donald White <dew@datera.io>
Tested-by: Gary Guo <ghg@datera.io>
Cc: Gary Guo <ghg@datera.io>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org> # v3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch addresses a long-standing bug with multi-session
(eg: iscsi-target + iser-target) se_node_acl dynamic free
withini transport_deregister_session().

This bug is caused when a storage endpoint is configured with
demo-mode (generate_node_acls = 1 + cache_dynamic_acls = 1)
initiators, and initiator login creates a new dynamic node acl
and attaches two sessions to it.

After that, demo-mode for the storage instance is disabled via
configfs (generate_node_acls = 0 + cache_dynamic_acls = 0) and
the existing dynamic acl is never converted to an explicit ACL.

The end result is dynamic acl resources are released twice when
the sessions are shutdown in transport_deregister_session().

If the storage instance is not changed to disable demo-mode,
or the dynamic acl is converted to an explict ACL, or there
is only a single session associated with the dynamic ACL,
the bug is not triggered.

To address this big, move the release of dynamic se_node_acl
memory into target_complete_nacl() so it's only freed once
when se_node_acl->acl_kref reaches zero.

(Drop unnecessary list_del_init usage - HCH)
Reported-by: Rob Millner <rlm@daterainc.com>
Tested-by: Rob Millner <rlm@daterainc.com>
Cc: Rob Millner <rlm@daterainc.com>
Cc: stable@vger.kernel.org # 4.1+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch fixes a bug where incoming task management requests
can be explicitly aborted during an active LUN_RESET, but who's
struct work_struct are canceled in-flight before execution.

This occurs when core_tmr_drain_tmr_list() invokes cancel_work_sync()
for the incoming se_tmr_req->task_cmd->work, resulting in cmd->work
for target_tmr_work() never getting invoked and the aborted TMR
waiting indefinately within transport_wait_for_tasks().

To address this case, perform a CMD_T_ABORTED check early in
transport_generic_handle_tmr(), and invoke the normal path via
transport_cmd_check_stop_to_fabric() to complete any TMR kthreads
blocked waiting for CMD_T_STOP in transport_wait_for_tasks().

Also, move the TRANSPORT_ISTATE_PROCESSING assignment earlier
into transport_generic_handle_tmr() so the existing check in
core_tmr_drain_tmr_list() avoids attempting abort the incoming
se_tmr_req->task_cmd->work if it has already been queued into
se_device->tmr_wq.
Reported-by: Rob Millner <rlm@daterainc.com>
Tested-by: Rob Millner <rlm@daterainc.com>
Cc: Rob Millner <rlm@daterainc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch adds the missing target_complete_cmd() SCSI status
parameter change in target_xcopy_do_work(), that was originally
missing in commit 926317de.

It correctly propigates up the correct SCSI status during
EXTENDED_COPY exception cases, instead of always using the
hardcoded SAM_STAT_CHECK_CONDITION from original code.

This is required for ESX host environments that expect to
hit SAM_STAT_RESERVATION_CONFLICT for certain scenarios,
and SAM_STAT_CHECK_CONDITION results in non-retriable
status for these cases.
Reported-by: Nixon Vincent <nixon.vincent@calsoftinc.com>
Tested-by: Nixon Vincent <nixon.vincent@calsoftinc.com>
Cc: Nixon Vincent <nixon.vincent@calsoftinc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

After the v4.2+ RCU conversion to se_node_acl->lun_entry_hlist,
a BUG_ON() was added in core_enable_device_list_for_node() to
detect when the located orig->se_lun_acl contains an existing
se_lun_acl pointer reference.

However, this scenario can happen when a dynamically generated
NodeACL is being converted to an explicit NodeACL, when the
explicit NodeACL contains a different LUN mapping than the
default provided by the WWN endpoint.

So instead of triggering BUG_ON(), go ahead and fail instead
following the original pre RCU conversion logic.
Reported-by: Benjamin ESTRABAUD <ben.estrabaud@mpstor.com>
Cc: Benjamin ESTRABAUD <ben.estrabaud@mpstor.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

When autonuma (Automatic NUMA balancing) marks a PTE inaccessible it
clears all the protection bits but leave the PTE valid.

With the Radix MMU, an attempt at executing from such a PTE will
take a fault with bit 35 of SRR1 set "SRR1_ISI_N_OR_G".

It is thus incorrect to treat all such faults as errors. We should
pass them to handle_mm_fault() for autonuma to deal with. The case
of pages that are really not executable is handled by the existing
test for VM_EXEC further down.

That leaves us with catching the kernel attempts at executing user
pages. We can catch that earlier, even before we do find_vma.

It is never valid on powerpc for the kernel to take an exec fault
to begin with. So fold that test with the existing test for the
kernel faulting on kernel addresses to bail out early.

Fixes: 1d18ad02 ("powerpc/mm: Detect instruction fetch denied and report")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We're using non-canonical addresses in drm_mm, and we're making sure that
userspace is using canonical addressing - both in case of softpin
(verifying incoming offset) and when relocating (converting to canonical
when updating offset returned to userspace).
Unfortunately when considering the need for relocations, we're comparing
offset from userspace (in canonical form) with drm_mm node (in
non-canonical form), and as a result, we end up always relocating if our
offsets are in the "problematic" range.
Let's always convert the offsets to avoid the performance impact of
relocations.

Fixes: a5f0edf6 ("drm/i915: Avoid writing relocs with addresses in non-canonical form")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Reported-by: Michał Pyrzowski <michal.pyrzowski@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170207195559.18798-1-michal.winiarski@intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 038c95a3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

The goal of the WARN was to catch when we are still actively using the
fence as we go into the runtime suspend. However, the reg->pin_count is
too coarse as it does not distinguish between exclusive ownership of the
fence register from activity.

I've not improved on the WARN, nor have we captured this WARN in an
exact igt, but it is showing up regularly in the wild:

[ 1915.935332] WARNING: CPU: 1 PID: 10861 at drivers/gpu/drm/i915/i915_gem.c:2022 i915_gem_runtime_suspend+0x116/0x130 [i915]
[ 1915.935383] WARN_ON(reg->pin_count)[ 1915.935399] Modules linked in:
 snd_hda_intel i915 drm_kms_helper vgem netconsole scsi_transport_iscsi fuse vfat fat x86_pkg_temp_thermal coretemp intel_cstate intel_uncore snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd mei_me mei serio_raw intel_rapl_perf intel_pch_thermal soundcore wmi acpi_pad i2c_algo_bit syscopyarea sysfillrect sysimgblt fb_sys_fops drm r8169 mii video [last unloaded: drm_kms_helper]
[ 1915.935785] CPU: 1 PID: 10861 Comm: kworker/1:0 Tainted: G     U  W       4.9.0-rc5+ #170
[ 1915.935799] Hardware name: LENOVO 80MX/Lenovo E31-80, BIOS DCCN34WW(V2.03) 12/01/2015
[ 1915.935822] Workqueue: pm pm_runtime_work
[ 1915.935845]  ffffc900044fbbf0 ffffffffac3220bc ffffc900044fbc40 0000000000000000
[ 1915.935890]  ffffc900044fbc30 ffffffffac059bcb 000007e6044fbc60 ffff8801626e3198
[ 1915.935937]  ffff8801626e0000 0000000000000002 ffffffffc05e5d4e 0000000000000000
[ 1915.935985] Call Trace:
[ 1915.936013]  [<ffffffffac3220bc>] dump_stack+0x4f/0x73
[ 1915.936038]  [<ffffffffac059bcb>] __warn+0xcb/0xf0
[ 1915.936060]  [<ffffffffac059c4f>] warn_slowpath_fmt+0x5f/0x80
[ 1915.936158]  [<ffffffffc052d916>] i915_gem_runtime_suspend+0x116/0x130 [i915]
[ 1915.936251]  [<ffffffffc04f1c74>] intel_runtime_suspend+0x64/0x280 [i915]
[ 1915.936277]  [<ffffffffac0926f1>] ? dequeue_entity+0x241/0xbc0
[ 1915.936298]  [<ffffffffac36bb85>] pci_pm_runtime_suspend+0x55/0x180
[ 1915.936317]  [<ffffffffac36bb30>] ? pci_pm_runtime_resume+0xa0/0xa0
[ 1915.936339]  [<ffffffffac4514e2>] __rpm_callback+0x32/0x70
[ 1915.936356]  [<ffffffffac451544>] rpm_callback+0x24/0x80
[ 1915.936375]  [<ffffffffac36bb30>] ? pci_pm_runtime_resume+0xa0/0xa0
[ 1915.936392]  [<ffffffffac45222d>] rpm_suspend+0x12d/0x680
[ 1915.936415]  [<ffffffffac69f6d7>] ? _raw_spin_unlock_irq+0x17/0x30
[ 1915.936435]  [<ffffffffac0810b8>] ? finish_task_switch+0x88/0x220
[ 1915.936455]  [<ffffffffac4534bf>] pm_runtime_work+0x6f/0xb0
[ 1915.936477]  [<ffffffffac074353>] process_one_work+0x1f3/0x4d0
[ 1915.936501]  [<ffffffffac074678>] worker_thread+0x48/0x4e0
[ 1915.936523]  [<ffffffffac074630>] ? process_one_work+0x4d0/0x4d0
[ 1915.936542]  [<ffffffffac074630>] ? process_one_work+0x4d0/0x4d0
[ 1915.936559]  [<ffffffffac07a2c9>] kthread+0xd9/0xf0
[ 1915.936580]  [<ffffffffac07a1f0>] ? kthread_park+0x60/0x60
[ 1915.936600]  [<ffffffffac69fe62>] ret_from_fork+0x22/0x30

In the case the register is pinned, it should be present and we will
need to invalidate them to be restored upon resume as we cannot expect
the owner of the pin to call get_fence prior to use after resume.

Fixes: 7c108fd8 ("drm/i915: Move fence cancellation to runtime suspend")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98804Reported-by: Lionel Landwerlin <lionel.g.landwerlin@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Imre Deak <imre.deak@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170203125717.8431-1-chris@chris-wilson.co.ukReviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit e0ec3ec6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Add the missing INTEL_OUTPUT_DP_MST case in bxt_get_dpll()
to correctly initialize the crtc_state and port plls when
link training a DP MST monitor on BXT/APL devices.

Fixes: a277ca7d ("drm/i915: Split bxt_ddi_pll_select()")
Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=99572Reviewed-by: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: Gary C Wang <gary.c.wang@intel.com>
Reviewed-by: Ciobanu, Nathan D <nathan.d.ciobanu@intel.com>
Reviewed-by: Herbert, Marc <marc.herbert@intel.com>
Reviewed-by: Bride, Jim <jim.bride@intel.com>
Reviewed-by: Navare, Manasi D <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486096329-6255-1-git-send-email-shawn.c.lee@intel.com
(cherry picked from commit 0aab2c72)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Apparently there are machines out there with Skylake CPU and KabyPoint
PCH. Judging from our driver code, there doesn't seem to be any code
paths that would do anything different between SunrisePoint and
KabyPoint PCHs, so it would seem okay to accept the combo without
warnings.

Fixes: 22dea0be ("drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.")
References: https://lists.freedesktop.org/archives/intel-gfx/2017-February/118611.htmlReported-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.8+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485956769-26015-1-git-send-email-jani.nikula@intel.com
(cherry picked from commit 3aac4acb)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Commit 920cf419 ("drm/i915: Introduce an internal allocator for
disposable private objects") introduced a regression for the kernel
running as Xen dom0: when switching to graphics mode a GPU HANG
occurred.

Reason seems to be a missing adaption similar to that done in
commit 7453c549 ("swiotlb: Export swiotlb_max_segment to users")
to i915_gem_object_get_pages_internal().

So limit the maximum page order to be used according to the maximum
swiotlb segment size instead to the complete swiotlb size.

Fixes: 920cf419 ("drm/i915: Introduce an internal allocator for disposable private objects")
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202094711.939-1-jgross@suse.com
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 5584f1b1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

On a non-llc system, the objects are created with .cache_level =
CACHE_NONE and so the transition to uncached for scanout is a no-op.
However, if the object was never written to, it will still be in the CPU
domain (having been zeroed out by shmemfs). Those cachelines need to be
flushed prior to display.

Reported-and-tested-by: Vito Caputo
Fixes: a6a7cc4b ("drm/i915: Always flush the dirty CPU cache when pinning the scanout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.10-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170109111932.6342-1-chris@chris-wilson.co.ukReviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 69aeafea)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

page_flip_completed() dereferences 'work' variable after executing
queue_work(). This is not safe as the 'work' item might be already freed
by queued work:

    BUG: KASAN: use-after-free in page_flip_completed+0x3ff/0x490 at addr ffff8803dc010f90
    Call Trace:
     __asan_report_load8_noabort+0x59/0x80
     page_flip_completed+0x3ff/0x490
     intel_finish_page_flip_mmio+0xe3/0x130
     intel_pipe_handle_vblank+0x2d/0x40
     gen8_irq_handler+0x4a7/0xed0
     __handle_irq_event_percpu+0xf6/0x860
     handle_irq_event_percpu+0x6b/0x160
     handle_irq_event+0xc7/0x1b0
     handle_edge_irq+0x1f4/0xa50
     handle_irq+0x41/0x70
     do_IRQ+0x9a/0x200
     common_interrupt+0x89/0x89

    Freed:
     kfree+0x113/0x4d0
     intel_unpin_work_fn+0x29a/0x3b0
     process_one_work+0x79e/0x1b70
     worker_thread+0x611/0x1460
     kthread+0x241/0x3a0
     ret_from_fork+0x27/0x40

Move queue_work() after	trace_i915_flip_complete() to fix this.

Fixes: e5510fac ("drm/i915: add tracepoints for flip requests & completions")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org> # v2.6.36+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170126143211.24013-1-aryabinin@virtuozzo.com
(cherry picked from commit 05c41f92)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

SELinux tries to support setting/clearing of /proc/pid/attr attributes
from the shell by ignoring terminating newlines and treating an
attribute value that begins with a NUL or newline as an attempt to
clear the attribute.  However, the test for clearing attributes has
always been wrong; it has an off-by-one error, and this could further
lead to reading past the end of the allocated buffer since commit
bb646cdb ("proc_pid_attr_write():
switch to memdup_user()").  Fix the off-by-one error.

Even with this fix, setting and clearing /proc/pid/attr attributes
from the shell is not straightforward since the interface does not
support multiple write() calls (so shells that write the value and
newline separately will set and then immediately clear the attribute,
requiring use of echo -n to set the attribute), whereas trying to use
echo -n "" to clear the attribute causes the shell to skip the
write() call altogether since POSIX says that a zero-length write
causes no side effects. Thus, one must use echo -n to set and echo
without -n to clear, as in the following example:
$ echo -n unconfined_u:object_r:user_home_t:s0 > /proc/$$/attr/fscreate
$ cat /proc/$$/attr/fscreate
unconfined_u:object_r:user_home_t:s0
$ echo "" > /proc/$$/attr/fscreate
$ cat /proc/$$/attr/fscreate

Note the use of /proc/$$ rather than /proc/self, as otherwise
the cat command will read its own attribute value, not that of the shell.

There are no users of this facility to my knowledge; possibly we
should just get rid of it.

UPDATE: Upon further investigation it appears that a local process
with the process:setfscreate permission can cause a kernel panic as a
result of this bug.  This patch fixes CVE-2017-2618.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: added the update about CVE-2017-2618 to the commit description]
Cc: stable@vger.kernel.org # 3.5: d6ea83ecSigned-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>