The branch range checks in ftrace_make_call() and ftrace_make_nop() are
incorrect, erroneously permitting a forwards branch of 128M and
erroneously rejecting a backwards branch of 128M.

This is because both functions calculate the offset backwards,
calculating the offset *from* the target *to* the branch, rather than
the other way around as the later comparisons expect.

If an out-of-range branch were erroeously permitted, this would later be
rejected by aarch64_insn_gen_branch_imm() as branch_imm_common() checks
the bounds correctly, resulting in warnings and the placement of a BRK
instruction. Note that this can only happen for a forwards branch of
exactly 128M, and so the caller would need to be exactly 128M bytes
below the relevant ftrace trampoline.

If an in-range branch were erroeously rejected, then:

* For modules when CONFIG_ARM64_MODULE_PLTS=y, this would result in the
  use of a PLT entry, which is benign.

  Note that this is the common case, as this is selected by
  CONFIG_RANDOMIZE_BASE (and therefore RANDOMIZE_MODULE_REGION_FULL),
  which distributions typically seelct. This is also selected by
  CONFIG_ARM64_ERRATUM_843419.

* For modules when CONFIG_ARM64_MODULE_PLTS=n, this would result in
  internal ftrace failures.

* For core kernel text, this would result in internal ftrace failues.

  Note that for this to happen, the kernel text would need to be at
  least 128M bytes in size, and typical configurations are smaller tha
  this.

Fix this by calculating the offset *from* the branch *to* the target in
both functions.

Fixes: f8af0b36 ("arm64: ftrace: don't validate branch via PLT in ftrace_make_nop()")
Fixes: e71a4e1b ("arm64: ftrace: add support for far branches to dynamic ftrace")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220614080944.1349146-2-mark.rutland@arm.comSigned-off-by: Catalin Marinas <catalin.marinas@arm.com>

This reverts commit 73e2d827.

The reverted patch was needed as a fix after commit f5bda35f
("random: use static branch for crng_ready()"). However, this was
already fixed by 60e5b288 ("random: do not use jump labels before
they are initialized") and hence no longer necessary to initialise jump
labels before setup_machine_fdt().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Merge tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "Highlights:

   - Fix hp-wmi regression on HP Omen laptops introduced in 5.18

   - Several hardware-id additions

   - A couple of other tiny fixes"

* tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/intel: hid: Add Surface Go to VGBS allow list
  platform/x86: hp-wmi: Use zero insize parameter only when supported
  platform/x86: hp-wmi: Resolve WMI query failures on some devices
  platform/x86: gigabyte-wmi: Add support for B450M DS3H-CF
  platform/x86: gigabyte-wmi: Add Z690M AORUS ELITE AX DDR4 support
  platform/x86: barco-p50-gpio: Add check for platform_driver_register
  platform/x86/intel: pmc: Support Intel Raptorlake P
  platform/x86/intel: Fix pmt_crashlog array reference
  platform/mellanox: Add static in struct declaration.
  platform/mellanox: Spelling s/platfom/platform/

Pull workqueue fixes from Tejun Heo:
 "Tetsuo's patch to trigger build warnings if system-wide wq's are
  flushed along with a TP type update and trivial comment update"

* tag 'wq-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Switch to new kerneldoc syntax for named variable macro argument
  workqueue: Fix type of cpu in trace event
  workqueue: Wrap flush_workqueue() using a macro

Merge tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Make the *.mod build rule portable for POSIX awk

 - Fix regression of 'make nsdeps'

 - Make scripts/check-local-export working for older bash versions

 - Fix scripts/gdb to extract the .config data from vmlinux

* tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  scripts/gdb: change kernel config dumping method
  scripts/check-local-export: avoid 'wait $!' for process substitution
  scripts/nsdeps: adjust to the format change of *.mod files
  kbuild: avoid regex RS for POSIX awk

Pull cifs client fixes from Steve French:
 "Three reconnect fixes, all for stable as well.

  One of these three reconnect fixes does address a problem with
  multichannel reconnect, but this does not include the additional
  fix (still being tested) for dynamically detecting multichannel
  adapter changes which will improve those reconnect scenarios even
  more"

* tag '5.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: populate empty hostnames for extra channels
  cifs: return errors during session setup during reconnects
  cifs: fix reconnect on smb3 mount types

Pull random number generator fixes from Jason Donenfeld:

 - A fix for a 5.19 regression for a case in which early device tree
   initializes the RNG, which flips a static branch.

   On most plaforms, jump labels aren't initialized until much later, so
   this caused splats. On a few mailing list threads, we cooked up easy
   fixes for arm64, arm32, and risc-v. But then things looked slightly
   more involved for xtensa, powerpc, arc, and mips. And at that point,
   when we're patching 7 architectures in a place before the console is
   even available, it seems like the cost/risk just wasn't worth it.

   So random.c works around it now by checking the already exported
   `static_key_initialized` boolean, as though somebody already ran into
   this issue in the past. I'm not super jazzed about that; it'd be
   prettier to not have to complicate downstream code. But I suppose
   it's practical.

 - A few small code nits and adding a missing __init annotation.

 - A change to the default config values to use the cpu and bootloader's
   seeds for initializing the RNG earlier.

   This brings them into line with what all the distros do (Fedora/RHEL,
   Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void... at
   least), and moreover will now give us test coverage in various test
   beds that might have caught the above device tree bug earlier.

 - A change to WireGuard CI's configuration to increase test coverage
   around the RNG.

 - A documentation comment fix to unrelated maintainerless CRC code that
   I was asked to take, I guess because it has to do with polynomials
   (which the RNG thankfully no longer uses).

* tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  wireguard: selftests: use maximum cpu features and allow rng seeding
  random: remove rng_has_arch_random()
  random: credit cpu and bootloader seeds by default
  random: do not use jump labels before they are initialized
  random: account for arch randomness in bits
  random: mark bootloader randomness code as __init
  random: avoid checking crng_ready() twice in random_init()
  crc-itu-t: fix typo in CRC ITU-T polynomial comment

The Surface Go reports Chassis Type 9 (Laptop,) so the device needs to be
added to dmi_vgbs_allow_list to enable tablet mode when an attached Type
Cover is folded back.

BugLink: https://github.com/linux-surface/linux-surface/issues/837Signed-off-by: Duke Lee <krnhotwings@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220607213654.5567-1-krnhotwings@gmail.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

commit be9d73e6 ("platform/x86: hp-wmi: Fix 0x05 error code reported by
several WMI calls") and commit 12b19f14 ("platform/x86: hp-wmi: Fix
hp_wmi_read_int() reporting error (0x05)") cause ACPI BIOS Error (bug):
Attempt to CreateField of length zero (20211217/dsopcode-133) because of
the ACPI method HWMC, which unconditionally creates a Field of
size (insize*8) bits:
	CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN)
In cases where args->insize = 0, the Field size is 0, resulting in
an error.

Fix this by using zero insize only if 0x5 error code is returned

Tested on Omen 15 AMD (2020) board ID: 8786.

Fixes: be9d73e6 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls")
Signed-off-by: Bedant Patnaik <bedant.patnaik@gmail.com>
Tested-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/41be46743d21c78741232a47bbb5f1cdbcc3d21e.camel@gmail.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

WMI queries fail on some devices where the ACPI method HWMC
unconditionally attempts to create Fields beyond the buffer
if the buffer is too small, this breaks essential features
such as power profiles:

         CreateByteField (Arg1, 0x10, D008)
         CreateByteField (Arg1, 0x11, D009)
         CreateByteField (Arg1, 0x12, D010)
         CreateDWordField (Arg1, 0x10, D032)
         CreateField (Arg1, 0x80, 0x0400, D128)

In cases where args->data had zero length, ACPI BIOS Error
(bug): AE_AML_BUFFER_LIMIT, Field [D008] at bit
offset/length 128/8 exceeds size of target Buffer (128 bits)
(20211217/dsopcode-198) was obtained.

ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D009] at bit
offset/length 136/8 exceeds size of target Buffer (136bits)
(20211217/dsopcode-198)

The original code created a buffer size of 128 bytes regardless if
the WMI call required a smaller buffer or not.  This particular
behavior occurs in older BIOS and reproduced in OMEN laptops.  Newer
BIOS handles buffer sizes properly and meets the latest specification
requirements.  This is the reason why testing with a dynamically
allocated buffer did not uncover any failures with the test systems at
hand.

This patch was tested on several OMEN, Elite, and Zbooks.  It was
confirmed the patch resolves HPWMI_FAN GET/SET calls in an OMEN
Laptop 15-ek0xxx.  No problems were reported when testing on several Elite
and Zbooks notebooks.

Fixes: 4b4967cb ("platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated")
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220608212923.8585-2-jorge.lopez2@hp.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

The syntax without dots is available since commit 43756e34
("scripts/kernel-doc: Add support for named variable macro arguments").

The same HTML output is produced with and without this patch.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

Pull gpio fixes from Bartosz Golaszewski:
 "A set of fixes. Most address the new warning we emit at build time
  when irq chips are not immutable with some additional tweaks to
  gpio-crystalcove from Andy and a small tweak to gpio-dwapd.

   - make irq_chip structs immutable in several Diolan and intel drivers
     to get rid of the new warning we emit when fiddling with irq chips

   - don't print error messages on probe deferral in gpio-dwapb"

* tag 'gpio-fixes-for-v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: dwapb: Don't print error on -EPROBE_DEFER
  gpio: dln2: make irq_chip immutable
  gpio: sch: make irq_chip immutable
  gpio: merrifield: make irq_chip immutable
  gpio: wcove: make irq_chip immutable
  gpio: crystalcove: Join function declarations and long lines
  gpio: crystalcove: Use specific type and API for IRQ number
  gpio: crystalcove: make irq_chip immutable

Pull SCSI fixes from James Bottomley:
 "Driver fixes and and one core patch.

  Nine of the driver patches are minor fixes and reworks to lpfc and the
  rest are trivial and minor fixes elsewhere"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: pmcraid: Fix missing resource cleanup in error case
  scsi: ipr: Fix missing/incorrect resource cleanup in error case
  scsi: mpt3sas: Fix out-of-bounds compiler warning
  scsi: lpfc: Update lpfc version to 14.2.0.4
  scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completion
  scsi: lpfc: Add more logging of cmd and cqe information for aborted NVMe cmds
  scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topology
  scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is aborted
  scsi: lpfc: Address NULL pointer dereference after starget_to_rport()
  scsi: lpfc: Resolve some cleanup issues following SLI path refactoring
  scsi: lpfc: Resolve some cleanup issues following abort path refactoring
  scsi: lpfc: Correct BDE type for XMIT_SEQ64_WQE in lpfc_ct_reject_event()
  scsi: vmw_pvscsi: Expand vcpuHint to 16 bits
  scsi: sd: Fix interpretation of VPD B9h length

Pull virtio fixes from Michael Tsirkin:
 "Fixes all over the place, most notably fixes for latent bugs in
  drivers that got exposed by suppressing interrupts before DRIVER_OK,
  which in turn has been done by 8b4ec69d ("virtio: harden vring
  IRQ")"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  um: virt-pci: set device ready in probe()
  vdpa: make get_vq_group and set_group_asid optional
  virtio: Fix all occurences of the "the the" typo
  vduse: Fix NULL pointer dereference on sysfs access
  vringh: Fix loop descriptors check in the indirect cases
  vdpa/mlx5: clean up indenting in handle_ctrl_vlan()
  vdpa/mlx5: fix error code for deleting vlan
  virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed
  vdpa/mlx5: Fix syntax errors in comments
  virtio-rng: make device ready before making request

Merge tag 'loongarch-fixes-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen.
 "Fix build errors and a stale comment"

* tag 'loongarch-fixes-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Remove MIPS comment about cycle counter
  LoongArch: Fix copy_thread() build errors
  LoongArch: Fix the !CONFIG_SMP build

Commit 6c776766 ("iov_iter: Fix iter_xarray_get_pages{,_alloc}()")
introduced a problem on some 32-bit architectures (at least arm, xtensa,
csky,sparc and mips), that have a 'size_t' that is 'unsigned int'.

The reason is that we now do

    min(nr * PAGE_SIZE - offset, maxsize);

where 'nr' and 'offset' and both 'unsigned int', and PAGE_SIZE is
'unsigned long'.  As a result, the normal C type rules means that the
first argument to 'min()' ends up being 'unsigned long'.

In contrast, 'maxsize' is of type 'size_t'.

Now, 'size_t' and 'unsigned long' are always the same physical type in
the kernel, so you'd think this doesn't matter, and from an actual
arithmetic standpoint it doesn't.

But on 32-bit architectures 'size_t' is commonly 'unsigned int', even if
it could also be 'unsigned long'.  In that situation, both are unsigned
32-bit types, but they are not the *same* type.

And as a result 'min()' will complain about the distinct types (ignore
the "pointer types" part of the error message: that's an artifact of the
way we have made 'min()' check types for being the same):

  lib/iov_iter.c: In function 'iter_xarray_get_pages':
  include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror]
     20 |         (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
        |                                   ^~
  lib/iov_iter.c:1464:16: note: in expansion of macro 'min'
   1464 |         return min(nr * PAGE_SIZE - offset, maxsize);
        |                ^~~

This was not visible on 64-bit architectures (where we always define
'size_t' to be 'unsigned long').

Force these cases to use 'min_t(size_t, x, y)' to make the type explicit
and avoid the issue.

[ Nit-picky note: technically 'size_t' doesn't have to match 'unsigned
  long' arithmetically. We've certainly historically seen environments
  with 16-bit address spaces and 32-bit 'unsigned long'.

  Similarly, even in 64-bit modern environments, 'size_t' could be its
  own type distinct from 'unsigned long', even if it were arithmetically
  identical.

  So the above type commentary is only really descriptive of the kernel
  environment, not some kind of universal truth for the kinds of wild
  and crazy situations that are allowed by the C standard ]
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/all/YqRyL2sIqQNDfky2@debian/
Cc: Jeff Layton <jlayton@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

By forcing the maximum CPU that QEMU has available, we expose additional
capabilities, such as the RNDR instruction, which increases test
coverage. This then allows the CI to skip the fake seeding step in some
cases. Also enable STRICT_KERNEL_RWX to catch issues related to early
jump labels when the RNG is initialized at boot.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

MAGIC_START("IKCFG_ST") and MAGIC_END("IKCFG_ED") are moved out
from the kernel_config_data variable.

Thus, we parse kernel_config_data directly instead of considering
offset of MAGIC_START and MAGIC_END.

Fixes: 13610aa9 ("kernel/configs: use .incbin directive to embed config_data.gz")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Call virtio_device_ready() to make this driver work after commit
b4ec69d7e09 ("virtio: harden vring IRQ"), since the driver uses the
virtqueues in the probe function.  (The virtio core sets the device
ready when probe returns.)

Fixes: 8b4ec69d ("virtio: harden vring IRQ")
Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Message-Id: <20220610151203.3492541-1-vincent.whitchurch@axis.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Johannes Berg <johannes@sipsolutions.net>

Pull nfsd fixes from Chuck Lever:
 "Notable changes:

   - There is now a backup maintainer for NFSD

  Notable fixes:

   - Prevent array overruns in svc_rdma_build_writes()

   - Prevent buffer overruns when encoding NFSv3 READDIR results

   - Fix a potential UAF in nfsd_file_put()"

* tag 'nfsd-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Remove pointer type casts from xdr_get_next_encode_buffer()
  SUNRPC: Clean up xdr_get_next_encode_buffer()
  SUNRPC: Clean up xdr_commit_encode()
  SUNRPC: Optimize xdr_reserve_space()
  SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()
  SUNRPC: Trap RDMA segment overflows
  NFSD: Fix potential use-after-free in nfsd_file_put()
  MAINTAINERS: reciprocal co-maintainership for file locking and nfsd

Currently, the secondary channels of a multichannel session
also get hostname populated based on the info in primary channel.
However, this will end up with a wrong resolution of hostname to
IP address during reconnect.

This change fixes this by not populating hostname info for all
secondary channels.

Fixes: 5112d80c ("cifs: populate server_hostname for extra channels")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'for-5.19/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM core's bioset initialization so that blk integrity pool is
   properly setup. Remove now unused bioset_init_from_src.

 - Fix DM zoned hang from locking imbalance due to needless check in
   clone_endio().

* tag 'for-5.19/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: fix zoned locking imbalance due to needless check in clone_endio
  block: remove bioset_init_from_src
  dm: fix bio_set allocation

Pull fscache cleanups from David Howells:

 - fix checker complaint in afs

 - two netfs cleanups:

    - netfs_inode calling convention cleanup plus the requisite
      documentation changes

    -  replace the ->cleanup op with a ->free_request op.

       This is possible as the I/O request is now always available at
       the cleanup point as the stuff to be cleaned up is no longer
       passed into the API functions, but rather obtained by ->init_request.

* 'fscache-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  netfs: Rename the netfs_io_request cleanup op and give it an op pointer
  netfs: Further cleanups after struct netfs_inode wrapper introduced
  afs: Fix some checker issues

Pull iov_iter fix from Al Viro:
 "ITER_XARRAY get_pages fix; now the return value is a lot saner (and
  more similar to logics for other flavours)"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  iov_iter: Fix iter_xarray_get_pages{,_alloc}()

Tested and works on my system.
Signed-off-by: August Wikerfors <git@augustwikerfors.se>
Link: https://lore.kernel.org/r/20220608212028.28307-1-git@augustwikerfors.seSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Add dmi_system_id of Gigabyte Z690M AORUS ELITE AX DDR4 board.
Tested on my PC.
Signed-off-by: Piotr Chmura <chmooreck@gmail.com>
Link: https://lore.kernel.org/r/bd83567e-ebf5-0b31-074b-5f6dc7f7c147@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.

Fixes: 86af1d02 ("platform/x86: Support for EC-connected GPIOs for identify LED/button on Barco P50 board")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Link: https://lore.kernel.org/r/20220526090345.1444172-1-jiasheng@iscas.ac.cnSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Add Raptorlake P to the list of the platforms that intel_pmc_core driver
supports for pmc_core device. Raptorlake P PCH is based on Alderlake P
PCH.
Signed-off-by: George D Sworo <george.d.sworo@intel.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220602012617.20100-1-george.d.sworo@intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

The probe function pmt_crashlog_probe() may incorrectly reference
the 'priv->entry array' as it uses 'i' to reference the array instead
of 'priv->num_entries' as it should.  This is similar to the problem
that was addressed in pmt_telemetry_probe via commit 2cdfa0c2
("platform/x86/intel: Fix 'rmmod pmt_telemetry' panic").

Cc: "David E. Box" <david.e.box@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David Arcari <darcari@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220526203140.339120-1-darcari@redhat.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Fix problem of missing static in struct declaration.

Fixes: 662f2482 ("platform/mellanox: Add support for new SN2201 system")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20220602145103.11859-1-michaelsh@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

The maths at the end of iter_xarray_get_pages() to calculate the actual
size doesn't work under some circumstances, such as when it's been asked to
extract a partial single page.  Various terms of the equation cancel out
and you end up with actual == offset.  The same issue exists in
iter_xarray_get_pages_alloc().

Fix these to just use min() to select the lesser amount from between the
amount of page content transcribed into the buffer, minus the offset, and
the size limit specified.

This doesn't appear to have caused a problem yet upstream because network
filesystems aren't getting the pages from an xarray iterator, but rather
passing it directly to the socket, which just iterates over it.  Cachefiles
*does* do DIO from one to/from ext4/xfs/btrfs/etc. but it always asks for
whole pages to be written or read.

Fixes: 7ff50620 ("iov_iter: Add ITER_XARRAY")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Mike Marshall <hubcap@omnibond.com>
cc: Gao Xiang <xiang@kernel.org>
cc: linux-afs@lists.infradead.org
cc: v9fs-developer@lists.sourceforge.net
cc: devel@lists.orangefs.org
cc: linux-erofs@lists.ozlabs.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The netfs_io_request cleanup op is now always in a position to be given a
pointer to a netfs_io_request struct, so this can be passed in instead of
the mapping and private data arguments (both of which are included in the
struct).

So rename the ->cleanup op to ->free_request (to match ->init_request) and
pass in the I/O pointer.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com

Change the signature of netfs helper functions to take a struct netfs_inode
pointer rather than a struct inode pointer where appropriate, thereby
relieving the need for the network filesystem to convert its internal inode
format down to the VFS inode only for netfslib to bounce it back up.  For
type safety, it's better not to do that (and it's less typing too).

Give netfs_write_begin() an extra argument to pass in a pointer to the
netfs_inode struct rather than deriving it internally from the file
pointer.  Note that the ->write_begin() and ->write_end() ops are intended
to be replaced in the future by netfslib code that manages this without the
need to call in twice for each page.

netfs_readpage() and similar are intended to be pointed at directly by the
address_space_operations table, so must stick to the signature dictated by
the function pointers there.

Changes
=======
- Updated the kerneldoc comments and documentation [DH].
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/CAHk-=wgkwKyNmNdKpQkqZ6DnmUL-x9hp0YBnUGjaPFEAdxDTbw@mail.gmail.com/

Remove an unused global variable and make another static as reported by
make C=1.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org

Pull folio fixes from Matthew Wilcox:
 "Four folio-related fixes:

   - Don't release a folio while it's still locked

   - Fix a use-after-free after dropping the mmap_lock

   - Fix a memory leak when splitting a page

   - Fix a kernel-doc warning for struct folio"

* tag 'folio-5.19a' of git://git.infradead.org/users/willy/pagecache:
  mm: Add kernel-doc for folio->mlock_count
  mm/huge_memory: Fix xarray node memory leak
  filemap: Cache the value of vm_flags
  filemap: Don't release a locked folio

After the commit ca522482 ("dm: pass NULL bdev to bio_alloc_clone"),
clone_endio() only calls dm_zone_endio() when DM targets remap the
clone bio's bdev to something other than the md->disk->part0 default.

However, if a DM target (e.g. dm-crypt) stacked ontop of a dm-zoned
does not remap the clone bio using bio_set_dev() then dm_zone_endio()
is not called at completion of the bios and zone locks are not
properly unlocked. This triggers a hang, in dm_zone_map_bio(), when
blktests block/004 is run for dm-crypt on zoned block devices. To
avoid the hang, simply remove the clone_endio() check that verifies
the target remapped the clone bio to a device other than the default.

Fixes: ca522482 ("dm: pass NULL bdev to bio_alloc_clone")
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

Fix a misspelling of the word "platform".
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/9c8edde31e271311b7832d7677fe84aba917da8d.1653376503.git.geert@linux-m68k.orgSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Pull more devicetree fixes from Rob Herring:

 - More DT meta-schema check fixes from new bindings in merge window

 - Fix stale DT binding references from Mauro

 - Update various binding maintainers

 - Fix in arm,malidp properties to match reality

 - Add deprecated 'atheros' vendor prefix

* tag 'devicetree-fixes-for-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: display: arm,malidp: remove bogus RQOS property
  dt-bindings: pinctrl: ralink: Fix 'enum' lists with duplicate entries
  dt-bindings: Drop more redundant 'maxItems/minItems' in if/then schemas
  dt-bindings: nvme: apple,nvme-ans: Drop 'maxItems' from 'apple,sart'
  MAINTAINERS: rectify entries for ARM DRM DRIVERS after dt conversion
  MAINTAINERS: update snps,axs10x-reset.yaml reference
  MAINTAINERS: update dongwoon,dw9807-vcm.yaml reference
  MAINTAINERS: update cortina,gemini-ethernet.yaml reference
  dt-bindings: mfd: rk808: update rockchip,rk808.yaml reference
  dt-bindings: reset: update st,stih407-powerdown.yaml references
  dt-bindings: arm: update vexpress-config.yaml references
  dt-bindings: interrupt-controller: update brcm,l2-intc.yaml reference
  dt-bindings: mfd: bd9571mwv: update rohm,bd9571mwv.yaml reference
  dt-bindings: update Luca Ceresoli's e-mail address
  dt-bindings: msm: update maintainers list with proper id
  dt-bindings: vendor-prefixes: document deprecated Atheros
  dt-bindings: Update QCOM USB subsystem maintainer information

Pull power management fixes from Rafael Wysocki:
 "These fix an intel_idle issue introduced during the 5.16 development
  cycle and two recent regressions in the system reboot/poweroff code.

  Specifics:

   - Fix CPUIDLE_FLAG_IRQ_ENABLE handling in intel_idle (Peter Zijlstra)

   - Allow all platforms to use the global poweroff handler and make
     non-syscall poweroff code paths work again (Dmitry Osipenko)"

* tag 'pm-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE
  kernel/reboot: Fix powering off using a non-syscall code paths
  kernel/reboot: Use static handler for register_platform_power_off()