- 13 May, 2012 5 commits
-
-
Kuninori Morimoto authored
Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Donghwa Lee authored
MIPI DSI uses 1.1v regulator, so change its supply name. Signed-off-by:
Donghwa Lee <dh09.lee@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Jingoo Han authored
This patch uses pr_debug instead of printk to allow dynamic debugging. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Jingoo Han authored
Remove unnecessary headers from the file. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Julia Lawall authored
Release bridge, as done on all other paths out of the function. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 08 May, 2012 10 commits
-
-
Donghwa Lee authored
When exynos_mipi_update_cfg() is called, mipi dsi registers were become sw reset. So, It needs to enable interrupt again. Signed-off-by:
Donghwa Lee <dh09.lee@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Jingoo Han authored
This patch fixes max loop count in EQ(Channel Equalization) sequence of link training. According to DP(displayport) specification, the max loop count in this sequence should be 5. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Peter Huewe authored
This patch replaces the code for getting an number from a userspace buffer by a simple call to kstrou8_from_user. This makes it easier to read and less error prone. Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Acked-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Peter Huewe authored
SiS_DRAMType is const and only used by sisfb_post_300_rwtest which is marked __devinit we can annotate SiS_DRAMType with __devinitconst and move it into the file scope in order to not have it created on the stack. This patch decreases the compiled module size by about 100bytes. And since hardcoded values are bad we use ARRAY_SIZE for determining the size of SiS_DRAMType ;) Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Peter Huewe authored
This patch removes the unused structs SiS_SDRDRAM_TYPE and SiS_DDRDRAM_TYPE from init.h These are not used anywhere so we can delete them. The SiS_DRAMType is identically defined in sis_main.c and only used there so we can remove it here. Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
H Hartley Sweeten authored
Functions not referenced outside of a source file should be marked static to prevent them from being exposed globally. Quiets the sparse warnings: warning: symbol 'mb862xx_intr' was not declared. Should it be static? Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
H Hartley Sweeten authored
Functions not referenced outside of a source file should be marked static to prevent them from being exposed globally. Quiets the sparse warnings: warning: symbol 'mb862xx_i2c_stop' was not declared. Should it be static? Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
H Hartley Sweeten authored
Functions not referenced outside of a source file should be marked static to prevent them from being exposed globally. Quiets the sparse warning: warning: symbol 'fb_deferred_io_page' was not declared. Should it be static? Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Jaya Kumar <jayalk@intworks.biz> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
H Hartley Sweeten authored
Functions not referenced outside of a source file should be marked static to prevent them from being exposed globally. Quiets the sparse warnings: warning: symbol 'ufx_handle_damage' was not declared. Should it be static? Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Mark Brown authored
Since s3c_fb_missing_pixclock() is called from s3c_fb_set_rgb_timing() which is used in the suspend/resume paths it can't be marked __devinit as this could result in it being discarded after boot. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 29 Apr, 2012 6 commits
-
-
-
Heiko Stübner authored
This controller not only supports higher resolutions than the K1900 but concurrent updates as well. This results in a generally higher display speed. Signed-off-by:
Heiko Stübner <heiko@sntech.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Heiko Stübner authored
This controller only supports smaller resolutions and only serial updates, i.e. it has to wait for an update to finish before starting another one. Signed-off-by:
Heiko Stübner <heiko@sntech.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Heiko Stübner authored
The AUO-K190X controllers share a very similar set of commands and can therefore also share most of the driver code. Signed-off-by:
Heiko Stübner <heiko@sntech.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Heiko Stübner authored
With this optional callback the driver is notified when the first page is entered into the pagelist and a new deferred_io call is scheduled. A possible use-case for this is runtime-pm. In the first_io call pm_runtime_get() could be called, which starts an asynchronous runtime_resume of the device. In the deferred_io callback a call to pm_runtime_barrier() makes the sure, the device is resumed by then and a pm_runtime_put() may put the device back to sleep. Also, some SoCs may use the runtime-pm system to determine if they are able to enter deeper idle states. Therefore it is necessary to keep the use-count from the first written page until the conclusion of the screen update, to prevent the system from going to sleep before completing the pending update. Two users of defio were using kmalloc to allocate the structure. These allocations are changed to kzalloc, to prevent uninitialised .first_io members in those drivers. Signed-off-by:
Heiko Stübner <heiko@sntech.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Steven J. Hill authored
Add support for LCD panel on MIPS SEAD-3 development platform. Signed-off-by:
Douglas Leung <douglas@mips.com> Signed-off-by:
Chris Dearman <chris@mips.com> Signed-off-by:
Steven J. Hill <sjhill@mips.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 24 Apr, 2012 1 commit
-
-
Laurent Pinchart authored
The exynos_mipi_dsi_set_main_disp_[hv]porch() functions take front and back porch arguments in that order. This maps to the fb_videomode right/lower_margin and left/upper_margin respectively. Fix the caller accordingly. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Donghwa Lee <dh09.lee@samsung.com>
-
- 21 Apr, 2012 3 commits
-
-
Marek Vasut authored
If there's some traffic on the LCD controller pads, the BootROM has trouble with sampling the bootmode from these pads. The BootROM usually ends in a loop. Signed-off-by:
Marek Vasut <marek.vasut@gmail.com> Cc: Chen Peter-B29397 <B29397@freescale.com> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Li Frank-B20596 <B20596@freescale.com> Cc: Lin Tony-B19295 <B19295@freescale.com> Cc: Linux FBDEV <linux-fbdev@vger.kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Subodh Nijsure <snijsure@grid-net.com> Cc: Tony Lin <tony.lin@freescale.com> Acked-by:
Shawn Guo <shawn.guo@linaro.org> Acked-by:
Wolfgang Denk <wd@denx.de> Acked-by:
Wolfram Sang <w.sang@pengutronix.de> Tested-by:
Wolfgang Denk <wd@denx.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Julia Lawall authored
The test tested not the most recently allocated value but a previously allocated one. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Julia Lawall authored
There were two problems in this code: failure of the setup function should free locally allocated resources like other nearby failures, and the test if (&info->cmap) can never be false. To generally clean things up, this patch reorders the error handling code at the failed label and adds labels so that the conditionals are not necessary. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by:
Ryan Mallon <rmallon@gmail.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 18 Apr, 2012 1 commit
-
-
David Brown authored
The change commit 461cbe77 Author: Gregory Bean <gbean@codeaurora.org> Date: Wed Jul 28 10:22:13 2010 -0700 video: msm: Fix section mismatch in mddi.c. fixes a section mismatch between the board file and the driver's probe function, however, it misses the additional mismatches between the probe function and some routines it calls. Fix these up as well. Signed-off-by:
David Brown <davidb@codeaurora.org> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 16 Apr, 2012 4 commits
-
-
Jingoo Han authored
This patch adds analog and pll control setting. This control setting is used for DP TX PHY block to set the values as below. It is beneficial to improve analog characteristics. - TX terminal registor is 50 Ohm. - Reference clock of PHY is 24 MHz. - Power source for TX digital logic is 1.0625 V. - Power source for internal clock driver is 1.0625 V. - PLL VCO range setting is 600 uA. - Power down ring osc is turned off. - AUX terminal resistor is 50 Ohm. - AUX channel current is 8 mA and multiplied by 2. - TX channel output amplitude is 400 mV. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Jingoo Han authored
The char pointer for adjust_request variable is replaced with char array to fix possible null pointer dereference when clock recovery is failed. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Jingoo Han authored
DP PLL Lock status should be checked in order to prevent unlocked PLL. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Jingoo Han authored
This patch adds runtime_get/put to suspend/resume, which should be necessary to prevent the problem to access the fimd register without block power on. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 15 Apr, 2012 1 commit
-
-
Alexander Guy authored
Signed-off-by:
Alexander Guy <alexander.guy@guy-engineering.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 09 Apr, 2012 6 commits
-
-
Axel Lin authored
If wait_event_interruptible_timeout returns a positive value, it means the condition evaluated is true. Which means priv->shared->hw_running is false. And then we will exit the loop. This patch simplifies the logic to exit the while loop. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Thomas Abraham authored
For all the Samsung SoC based boards which have the platform data for s3c-fb driver, the 'default_win' element in the platform data is removed and the lcd panel video timing values are moved out of individual window configuration data. Acked-by:
Jingoo Han <jg1.han@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: JeongHyeon Kim <jhkim@insignal.co.kr> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Thomas Abraham authored
The display controller window data should contain window configuration data for only one type of lcd panel. So, for real6410 and mini6410 boards, split the existing display controller window data, which contains window configuration data for two different types of lcd panels, into two seperate instances and register one of them depending on the type of the lcd panel detected at runtime. This is a prerequisite change for a subsequent commit that reorders the platform data of display controller by moving video interface timing out of window setup data. Cc: Darius Augulis <augulis.darius@gmail.com> Acked-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Thomas Abraham authored
The decision to enable or disable the data output to the lcd panel from the controller need not be based on the value of 'default_win' element in the platform data. Instead, the data output to the panel is enabled if any of the windows are active, else data output is disabled. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Thomas Abraham authored
The video interface timing is independent of the window setup data. The resolution of the window can be smaller than that of the lcd panel to which the video data is output. So move the video timing data from the per-window setup data to the platform specific section in the platform data. This also removes the restriction that atleast one window should have the same resolution as that of the panel attached. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Thomas Abraham <thomas.abraham@linaro.org> Acked-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Wang YanQing authored
This patch fix the oops below that catched in my machine [ 81.560602] uvesafb: NVIDIA Corporation, GT216 Board - 0696a290, Chip Rev , OEM: NVIDIA, VBE v3.0 [ 81.609384] uvesafb: protected mode interface info at c000:d350 [ 81.609388] uvesafb: pmi: set display start = c00cd3b3, set palette = c00cd40e [ 81.609390] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 81.614558] uvesafb: VBIOS/hardware doesn't support DDC transfers [ 81.614562] uvesafb: no monitor limits have been set, default refresh rate will be used [ 81.614994] uvesafb: scrolling: ypan using protected mode interface, yres_virtual=4915 [ 81.744147] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 81.744153] BUG: unable to handle kernel paging request at c00cd3b3 [ 81.744159] IP: [<c00cd3b3>] 0xc00cd3b2 [ 81.744167] *pdpt = 00000000016d6001 *pde = 0000000001c7b067 *pte = 80000000000cd163 [ 81.744171] Oops: 0011 [#1] SMP [ 81.744174] Modules linked in: uvesafb(+) cfbcopyarea cfbimgblt cfbfillrect [ 81.744178] [ 81.744181] Pid: 3497, comm: modprobe Not tainted 3.3.0-rc4NX+ #71 Acer Aspire 4741 /Aspire 4741 [ 81.744185] EIP: 0060:[<c00cd3b3>] EFLAGS: 00010246 CPU: 0 [ 81.744187] EIP is at 0xc00cd3b3 [ 81.744189] EAX: 00004f07 EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 81.744191] ESI: f763f000 EDI: f763f6e8 EBP: f57f3a0c ESP: f57f3a00 [ 81.744192] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 81.744195] Process modprobe (pid: 3497, ti=f57f2000 task=f748c600 task.ti=f57f2000) [ 81.744196] Stack: [ 81.744197] f82512c5 f759341c 00000000 f57f3a30 c124a9bc 00000001 00000001 000001e0 [ 81.744202] f8251280 f763f000 f7593400 00000000 f57f3a40 c12598dd f5c0c000 00000000 [ 81.744206] f57f3b10 c1255efe c125a21a 00000006 f763f09c 00000000 c1c6cb60 f7593400 [ 81.744210] Call Trace: [ 81.744215] [<f82512c5>] ? uvesafb_pan_display+0x45/0x60 [uvesafb] [ 81.744222] [<c124a9bc>] fb_pan_display+0x10c/0x160 [ 81.744226] [<f8251280>] ? uvesafb_vbe_find_mode+0x180/0x180 [uvesafb] [ 81.744230] [<c12598dd>] bit_update_start+0x1d/0x50 [ 81.744232] [<c1255efe>] fbcon_switch+0x39e/0x550 [ 81.744235] [<c125a21a>] ? bit_cursor+0x4ea/0x560 [ 81.744240] [<c129b6cb>] redraw_screen+0x12b/0x220 [ 81.744245] [<c128843b>] ? tty_do_resize+0x3b/0xc0 [ 81.744247] [<c129ef42>] vc_do_resize+0x3d2/0x3e0 [ 81.744250] [<c129efb4>] vc_resize+0x14/0x20 [ 81.744253] [<c12586bd>] fbcon_init+0x29d/0x500 [ 81.744255] [<c12984c4>] ? set_inverse_trans_unicode+0xe4/0x110 [ 81.744258] [<c129b378>] visual_init+0xb8/0x150 [ 81.744261] [<c129c16c>] bind_con_driver+0x16c/0x360 [ 81.744264] [<c129b47e>] ? register_con_driver+0x6e/0x190 [ 81.744267] [<c129c3a1>] take_over_console+0x41/0x50 [ 81.744269] [<c1257b7a>] fbcon_takeover+0x6a/0xd0 [ 81.744272] [<c12594b8>] fbcon_event_notify+0x758/0x790 [ 81.744277] [<c10929e2>] notifier_call_chain+0x42/0xb0 [ 81.744280] [<c1092d30>] __blocking_notifier_call_chain+0x60/0x90 [ 81.744283] [<c1092d7a>] blocking_notifier_call_chain+0x1a/0x20 [ 81.744285] [<c124a5a1>] fb_notifier_call_chain+0x11/0x20 [ 81.744288] [<c124b759>] register_framebuffer+0x1d9/0x2b0 [ 81.744293] [<c1061c73>] ? ioremap_wc+0x33/0x40 [ 81.744298] [<f82537c6>] uvesafb_probe+0xaba/0xc40 [uvesafb] [ 81.744302] [<c12bb81f>] platform_drv_probe+0xf/0x20 [ 81.744306] [<c12ba558>] driver_probe_device+0x68/0x170 [ 81.744309] [<c12ba731>] __device_attach+0x41/0x50 [ 81.744313] [<c12b9088>] bus_for_each_drv+0x48/0x70 [ 81.744316] [<c12ba7f3>] device_attach+0x83/0xa0 [ 81.744319] [<c12ba6f0>] ? __driver_attach+0x90/0x90 [ 81.744321] [<c12b991f>] bus_probe_device+0x6f/0x90 [ 81.744324] [<c12b8a45>] device_add+0x5e5/0x680 [ 81.744329] [<c122a1a3>] ? kvasprintf+0x43/0x60 [ 81.744332] [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70 [ 81.744335] [<c121e6e4>] ? kobject_set_name_vargs+0x64/0x70 [ 81.744339] [<c12bbe9f>] platform_device_add+0xff/0x1b0 [ 81.744343] [<f8252906>] uvesafb_init+0x50/0x9b [uvesafb] [ 81.744346] [<c100111f>] do_one_initcall+0x2f/0x170 [ 81.744350] [<f82528b6>] ? uvesafb_is_valid_mode+0x66/0x66 [uvesafb] [ 81.744355] [<c10c6994>] sys_init_module+0xf4/0x1410 [ 81.744359] [<c1157fc0>] ? vfsmount_lock_local_unlock_cpu+0x30/0x30 [ 81.744363] [<c144cb10>] sysenter_do_call+0x12/0x36 [ 81.744365] Code: f5 00 00 00 32 f6 66 8b da 66 d1 e3 66 ba d4 03 8a e3 b0 1c 66 ef b0 1e 66 ef 8a e7 b0 1d 66 ef b0 1f 66 ef e8 fa 00 00 00 61 c3 <60> e8 c8 00 00 00 66 8b f3 66 8b da 66 ba d4 03 b0 0c 8a e5 66 [ 81.744388] EIP: [<c00cd3b3>] 0xc00cd3b3 SS:ESP 0068:f57f3a00 [ 81.744391] CR2: 00000000c00cd3b3 [ 81.744393] ---[ end trace 18b2c87c925b54d6 ]--- Signed-off-by:
Wang YanQing <udknight@gmail.com> Cc: Michal Januszewski <spock@gentoo.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: stable@vger.kernel.org
-
- 08 Apr, 2012 3 commits
-
-
Manuel Lauss authored
Commit 1c16697b ("drivers/video/au*fb.c: use devm_ functions) introduced 2 build failures in the au1100fb and au1200fb drivers, fix them. Signed-off-by:
Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Ondrej Zary authored
kyrofb is completely broken on x86_64 because the registers are defined as unsigned long. Change them to u32 to make the driver work. Tested with Hercules 3D Prophet 4000XT. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Acked-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
Linus Torvalds authored
-