- 26 May, 2022 4 commits
-
-
Paul Hsieh authored
[Why] when driver and dmub request aux engine at the same time, dmub grant the aux engine but driver fail. Then driver release aux engine but doesn't clear the request bit. Then aux engine will be occupied by driver forever. [How] When driver release aux engine, clear request bit as well. Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Paul Hsieh <paul.hsieh@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alvin Lee authored
[Why & How] Code clean up in dc. Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Alvin Lee <Alvin.Lee2@amd.com> Tested-by:
-
Jimmy Kizito authored
[Why] Driver needs up to date DPIA HPD status. [How] Use HPD query command to get DPIA HPD status. Reviewed-by:
Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Reviewed-by:
Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by:
-
Jimmy Kizito authored
[Why] Some displays may need several link training attempts before link training succeeds. [How] If training succeeds after falling back to lower link bandwidth, retry at original link bandwidth instead of abandoning link training whenever link bandwidth is less than stream bandwidth. Reviewed-by:
-
- 25 May, 2022 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2022-05-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 fixes for v5.19 merge window: - Build, sparse, UB, and CFI fixes - Variable scope fix - Audio pipe logging fix - ICL+ DSI NULL dereference fix Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87sfozuj44.fsf@intel.com
-
- 23 May, 2022 1 commit
-
-
Jani Nikula authored
The VBT send packet port selection was never updated for ICL+ where the 2nd link is on port B instead of port C as in VLV+ DSI. First, single link DSI needs to use the configured port instead of relying on the VBT sequence block port. Remove the hard-coded port C check here and make it generic. For reference, see commit f915084e ("drm/i915: Changes related to the sequence port no for") for the original VLV specific fix. Second, the sequence block port number is either 0 or 1, where 1 indicates the 2nd link. Remove the hard-coded port C here for 2nd link. (This could be a "find second set bit" on DSI ports, but just check the two possible options.) Third, sanity check the result with a warning to avoid a NULL pointer dereference. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5984 Cc: stable@vger.kernel.org # v4.19+ Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220520094600.2066945-1-jani.nikula@intel.com (cherry picked from commit 08c59dde)
-
- 20 May, 2022 2 commits
-
-
https://gitlab.freedesktop.org/abhinavk/msmDave Airlie authored
5.19 fixes for msm-next - Limiting WB modes to max sspp linewidth - Fixing the supported rotations to add 180 back for IGT - Fix to handle pm_runtime_get_sync() errors to avoid unclocked access in the bind() path for dpu driver - Fix the irq_free() without request issue which was a big-time hitter in the CI-runs. Signed-off-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2022-05-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next A device tree binding change for Rockchip VOP2 Signed-off-by:
-
- 19 May, 2022 9 commits
-
-
Borislav Petkov authored
Fix: In file included from <command-line>:0:0: drivers/gpu/drm/i915/gt/uc/intel_guc.c: In function ‘intel_guc_send_mmio’: ././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_1047’ \ declared with attribute error: FIELD_PREP: mask is not constant _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) and other build errors due to shift overflowing values. See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. v2 by Jani: - Drop the i915_reg.h changes Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Ruiqi GONG <gongruiqi1@huawei.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:Borislav Petkov <bp@suse.de> Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220518113315.1305027-2-jani.nikula@intel.com (cherry picked from commit 962bd34b)
-
Jani Nikula authored
Use REG_GENMASK() and REG_FIELD_PREP() to avoid errors due to -fsanitize=shift. References: https://lore.kernel.org/r/20220405151517.29753-12-bp@alien8.deReported-by:
Ruiqi GONG <gongruiqi1@huawei.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Andi Shyti authored
The INTEL_GT_RPS_SYSFS_ATTR was creating to different structures but. When called with the "static" keyword this is affecting only the first structure, while the second is created as non static. Move the static keyword inside the macros to affect both the structures. Reported-by:
Jani Nikula <jani.nikula@linux.intel.com> Fixes: 56a709cf ("drm/i915/gt: Create per-tile RPS sysfs interfaces") Signed-off-by:
Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Need to use pipe_name(pipe) instead of pipe directly. Fixes: 1f31e35f ("drm/i915/audio: unify audio codec enable/disable debug logging") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Nathan Chancellor authored
When an attribute group is created with sysfs_create_group(), the ->sysfs_ops() callback is set to kobj_sysfs_ops, which sets the ->show() callback to kobj_attr_show(). kobj_attr_show() uses container_of() to get the ->show() callback from the attribute it was passed, meaning the ->show() callback needs to be the same type as the ->show() callback in 'struct kobj_attribute'. However, show_dynamic_id() has the type of the ->show() callback in 'struct device_attribute', which causes a CFI violation when opening the 'id' sysfs node under drm/card0/metrics. This happens to work because the layout of 'struct kobj_attribute' and 'struct device_attribute' are the same, so the container_of() cast happens to allow the ->show() callback to still work. Change the type of show_dynamic_id() to match the ->show() callback in 'struct kobj_attributes' and update the type of sysfs_metric_id to match, which resolves the CFI violation. Fixes: f89823c2 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface") Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220513075136.1027007-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 18fb42db) Signed-off-by:
-
Imre Deak authored
Fix the following sparse warnings: drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: warning: mixing different enum types: drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: unsigned int enum intel_display_power_domain drivers/gpu/drm/i915/display/intel_display_power.c:2431:34: int enum port drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: warning: mixing different enum types: drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: unsigned int enum intel_display_power_domain drivers/gpu/drm/i915/display/intel_display_power.c:2442:37: int enum port drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: warning: mixing different enum types: drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: unsigned int enum intel_display_power_domain drivers/gpu/drm/i915/display/intel_display_power.c:2468:43: unsigned int enum aux_ch drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: warning: mixing different enum types: drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: unsigned int enum intel_display_power_domain drivers/gpu/drm/i915/display/intel_display_power.c:2479:35: unsigned int enum aux_ch Fixes: 979e1b32 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform") Reported-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
YueHaibing authored
drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c: In function ‘act_freq_mhz_show’: drivers/gpu/drm/i915/gt/intel_gt_sysfs_pm.c:276:20: error: implicit declaration of function ‘sysfs_gt_attribute_r_max_func’ [-Werror=implicit-function-declaration] 276 | u32 actual_freq = sysfs_gt_attribute_r_max_func(dev, attr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Move sysfs_gt_attribute_* macros out of #ifdef block to fix this. Fixes: 56a709cf ("drm/i915/gt: Create per-tile RPS sysfs interfaces") Signed-off-by:YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.19-2022-05-18' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.19-2022-05-18: amdgpu: - Misc code cleanups - Additional SMU 13.x enablement - Smartshift fixes - GFX11 fixes - Support for SMU 13.0.4 - SMU mutex fix - Suspend/resume fix amdkfd: - static checker fix - Doorbell/MMIO resource handling fix Signed-off-by:
-
Abhinav Kumar authored
If there are errors while trying to enable the pm in the bind path, it will lead to unclocked access of hw revision register thereby crashing the device. This will not address why the pm_runtime_get_sync() fails but at the very least we should be able to prevent the crash by handling the error and bailing out earlier. changes in v2: - use pm_runtime_resume_and_get() instead of pm_runtime_get_sync() Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support") Signed-off-by:
Rob Clark <robdclark@gmail.com> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/486721/ Link: https://lore.kernel.org/r/20220518223407.26147-1-quic_abhinavk@quicinc.comSigned-off-by:
-
- 18 May, 2022 9 commits
-
-
Abhinav Kumar authored
DRM_MODE_ROTATE_180 was previously marked as supported even for devices not supporting inline rotation. This is true because the SSPPs can always flip the image. After inline rotation support changes, this bit was removed and kms_rotation_crc IGT test starts skipping now whereas it was previously passing. Restore DRM_MODE_ROTATE_180 bit to the supported rotations list. Fixes: dabfdd89 ("add inline rotation support for sc7280") Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
As msm_drm_uninit() is called from the msm_drm_init() error path, additional care should be necessary as not to call the free_irq() for the IRQ that was not requested before (because an error occured earlier than the request_irq() call). This fixed the issue reported with the following backtrace: [ 8.571329] Trying to free already-free IRQ 187 [ 8.571339] WARNING: CPU: 0 PID: 76 at kernel/irq/manage.c:1895 free_irq+0x1e0/0x35c [ 8.588746] Modules linked in: pmic_glink pdr_interface fastrpc qrtr_smd snd_soc_hdmi_codec msm fsa4480 gpu_sched drm_dp_aux_bus qrtr i2c_qcom_geni crct10dif_ce qcom_stats qcom_q6v5_pas drm_display_helper gpi qcom_pil_info drm_kms_helper qcom_q6v5 qcom_sysmon qcom_common qcom_glink_smem qcom_rng mdt_loader qmi_helpers phy_qcom_qmp ufs_qcom typec qnoc_sm8350 socinfo rmtfs_mem fuse drm ipv6 [ 8.624154] CPU: 0 PID: 76 Comm: kworker/u16:2 Not tainted 5.18.0-rc5-next-20220506-00033-g6cee8cab6089-dirty #419 [ 8.624161] Hardware name: Qualcomm Technologies, Inc. SM8350 HDK (DT) [ 8.641496] Workqueue: events_unbound deferred_probe_work_func [ 8.647510] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8.654681] pc : free_irq+0x1e0/0x35c [ 8.658454] lr : free_irq+0x1e0/0x35c [ 8.662228] sp : ffff800008ab3950 [ 8.665642] x29: ffff800008ab3950 x28: 0000000000000000 x27: ffff16350f56a700 [ 8.672994] x26: ffff1635025df080 x25: ffff16350251badc x24: ffff16350251bb90 [ 8.680343] x23: 0000000000000000 x22: 00000000000000bb x21: ffff16350e8f9800 [ 8.687690] x20: ffff16350251ba00 x19: ffff16350cbd5880 x18: ffffffffffffffff [ 8.695039] x17: 0000000000000000 x16: ffffa2dd12179434 x15: ffffa2dd1431d02d [ 8.702391] x14: 0000000000000000 x13: ffffa2dd1431d028 x12: 662d79646165726c [ 8.709740] x11: ffffa2dd13fd2438 x10: 000000000000000a x9 : 00000000000000bb [ 8.717111] x8 : ffffa2dd13fd23f0 x7 : ffff800008ab3750 x6 : 00000000fffff202 [ 8.724487] x5 : ffff16377e870a18 x4 : 00000000fffff202 x3 : ffff735a6ae1b000 [ 8.731851] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff1635015f8000 [ 8.739217] Call trace: [ 8.741755] free_irq+0x1e0/0x35c [ 8.745198] msm_drm_uninit.isra.0+0x14c/0x294 [msm] [ 8.750548] msm_drm_bind+0x28c/0x5d0 [msm] [ 8.755081] try_to_bring_up_aggregate_device+0x164/0x1d0 [ 8.760657] __component_add+0xa0/0x170 [ 8.764626] component_add+0x14/0x20 [ 8.768337] dp_display_probe+0x2a4/0x464 [msm] [ 8.773242] platform_probe+0x68/0xe0 [ 8.777043] really_probe.part.0+0x9c/0x28c [ 8.781368] __driver_probe_device+0x98/0x144 [ 8.785871] driver_probe_device+0x40/0x140 [ 8.790191] __device_attach_driver+0xb4/0x120 [ 8.794788] bus_for_each_drv+0x78/0xd0 [ 8.798751] __device_attach+0xdc/0x184 [ 8.802713] device_initial_probe+0x14/0x20 [ 8.807031] bus_probe_device+0x9c/0xa4 [ 8.810991] deferred_probe_work_func+0x88/0xc0 [ 8.815667] process_one_work+0x1d0/0x320 [ 8.819809] worker_thread+0x14c/0x444 [ 8.823688] kthread+0x10c/0x110 [ 8.827036] ret_from_fork+0x10/0x20 Reported-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: f026e431 ("drm/msm: Convert to Linux IRQ interfaces") Signed-off-by:
-
Abhinav Kumar authored
Writeback modes were being added according to mode_config.max_width but this is assigned to double of max_mixer_width. For compositors/clients using a single SSPP, this will fail the dpu_plane's atomic check as it checks for max_linewidth. Limit writeback modes according to max_linewidth to allow even compositors/clients which use only a single SSPP to use writeback. Fixes: 77b001ac ("drm/msm/dpu: add the writeback connector layer") Reported-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by:
-
Mario Limonciello authored
An A+A configuration on ASUS ROG Strix G513QY proves that the ASIC reset for handling aborted suspend can't work with s2idle. This functionality was introduced in commit daf8de08 ("drm/amdgpu: always reset the asic in suspend (v2)"). A few other commits have gone on top of the ASIC reset, but this still doesn't work on the A+A configuration in s2idle. Avoid doing the reset on dGPUs specifically when using s2idle. Fixes: daf8de08 ("drm/amdgpu: always reset the asic in suspend (v2)") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2008Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
Luben Tuikov authored
This fixes a kernel oops when MES is not enabled. Reported-by:
Kenny Ho <Kenny.Ho@amd.com> Suggested-by:
Jack Xiao <Jack.Xiao@amd.com> Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Fixes: 18ee4ce6 ("drm/amdgpu: add mes unmap legacy queue routine") Fixes: 3d879e81 ("drm/amdgpu: add init support for GFX11 (v2)") Signed-off-by:
-
Hangyu Hua authored
drm_gem_object_lookup will call drm_gem_object_get inside. So cursor_bo needs to be put when msm_gem_get_and_pin_iova fails. Fixes: e172d10a ("drm/msm/mdp5: Add hardware cursor support") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220509061125.18585-1-hbh25y@gmail.comSigned-off-by:
Rob Clark <robdclark@chromium.org>
-
Rob Clark authored
The offset got dropped by accident. Fixes: d413e6f9 ("drm/msm: Drop msm_gem_iova()") Signed-off-by:
-
Miaoqian Lin authored
of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. a6xx_gmu_init() passes the node to of_find_device_by_node() and of_dma_configure(), of_find_device_by_node() will takes its reference, of_dma_configure() doesn't need the node after usage. Add missing of_node_put() to avoid refcount leak. Fixes: 4b565ca5 ("drm/msm: Add A6XX device support") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Reviewed-by:
Akhil P Oommen <quic_akhilpo@quicinc.com> Link: https://lore.kernel.org/r/20220512121955.56937-1-linmq006@gmail.comSigned-off-by:
-
Douglas Anderson authored
Commit 7d8e9a90 ("drm/msm/dsi: move DSI host powerup to modeset time") caused sc7180 Chromebooks that use the parade-ps8640 bridge chip to fail to turn the display back on after it turns off. Unfortunately, it doesn't look easy to fix the parade-ps8640 driver to handle the new power sequence. The Linux driver has almost nothing in it and most of the logic for this bridge chip is in black-box firmware that the bridge chip uses. Also unfortunately, reverting the patch will break "tc358762". The long term solution here is probably Dave Stevenson's series [1] that would give more flexibility. However, that is likely not a quick fix. For the short term, we'll look at the compatible of the next bridge in the chain and go back to the old way for the Parade PS8640 bridge chip. If it's found that other bridge chips also need this workaround then we can add them to the list or consider inverting the condition. However, the hope is that the framework will not take too much longer to land and we won't have to add anything other than ps8640 here. [1] https://lore.kernel.org/r/cover.1646406653.git.dave.stevenson@raspberrypi.com Fixes: 7d8e9a90 ("drm/msm/dsi: move DSI host powerup to modeset time") Suggested-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
- 17 May, 2022 1 commit
-
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
fix address space collisions in some edge cases when userspace is using softpin and cleans up the MMU reference handling a bit. Signed-off-by:
-
- 16 May, 2022 13 commits
-
-
Sascha Hauer authored
"regs" seems to generic when there are multiple register spaces, so rename that one to "vop". Also change "gamma_lut" to better looking "gamma-lut". Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220511082109.1110043-3-s.hauer@pengutronix.de
-
Sascha Hauer authored
The VOP2 driver relies on reg-names properties, but these are not documented. Add the missing documentation and make reg-names mandatory. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sathishkumar S authored
create smartshift sysfs attributes from dGPU device even on smartshift 1.0 platform to be consistent. Do not populate the attributes on platforms that have APU only but not dGPU or vice versa. V2: avoid checking for the number of VGA/DISPLAY devices (Lijo) move code to read from dGPU or APU into a function and reuse (Lijo) Suggested-by:
Sathishkumar S <sathishkumar.sundararaju@amd.com> Acked-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Jiapeng Chong authored
Eliminate the follow smatch warning: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9687 amdgpu_dm_atomic_commit_tail() warn: inconsistent indenting. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Graham Sider authored
convert_to_mes_queue_type return can be negative, but queue_input.queue_type is uint32_t. Put return in integer var and cast to unsigned after negative check. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Graham Sider <Graham.Sider@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Hans de Goede authored
Lockdep complains about the smu->message_lock mutex being used before it is initialized through the following call path: amdgpu_device_init() amdgpu_dpm_mode2_reset() smu_mode2_reset() smu_v12_0_mode2_reset() smu_cmn_send_smc_msg_with_param() Move the mutex_init() call to smu_early_init() to fix the mutex being used before it is initialized. This fixes the following lockdep splat: [ 3.867331] ------------[ cut here ]------------ [ 3.867335] fbcon: Taking over console [ 3.867338] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 3.867340] WARNING: CPU: 14 PID: 491 at kernel/locking/mutex.c:579 __mutex_lock+0x44c/0x830 [ 3.867349] Modules linked in: amdgpu(+) crct10dif_pclmul drm_ttm_helper crc32_pclmul ttm crc32c_intel ghash_clmulni_intel hid_lg_g15 iommu_v2 sp5100_tco nvme gpu_sched drm_dp_helper nvme_core ccp wmi video hid_logitech_dj ip6_tables ip_tables ipmi_devintf ipmi_msghandler fuse i2c_dev [ 3.867363] CPU: 14 PID: 491 Comm: systemd-udevd Tainted: G I 5.18.0-rc5+ #33 [ 3.867366] Hardware name: Micro-Star International Co., Ltd. MS-7C95/B550M PRO-VDH WIFI (MS-7C95), BIOS 2.90 12/23/2021 [ 3.867369] RIP: 0010:__mutex_lock+0x44c/0x830 [ 3.867372] Code: ff 85 c0 0f 84 33 fc ff ff 8b 0d b7 50 25 01 85 c9 0f 85 25 fc ff ff 48 c7 c6 fb 41 82 99 48 c7 c7 6b 63 80 99 e8 88 2a f8 ff <0f> 0b e9 0b fc ff ff f6 83 b9 0c 00 00 01 0f 85 64 ff ff ff 4c 89 [ 3.867377] RSP: 0018:ffffaef8c0fc79f0 EFLAGS: 00010286 [ 3.867380] RAX: 0000000000000028 RBX: 0000000000000000 RCX: 0000000000000027 [ 3.867382] RDX: ffff9ccc0dda0928 RSI: 0000000000000001 RDI: ffff9ccc0dda0920 [ 3.867384] RBP: ffffaef8c0fc7a80 R08: 0000000000000000 R09: ffffaef8c0fc7820 [ 3.867386] R10: 0000000000000003 R11: ffff9ccc2a2fffe8 R12: 0000000000000002 [ 3.867388] R13: ffff9cc990808058 R14: 0000000000000000 R15: ffff9cc98bfc0000 [ 3.867390] FS: 00007fc4d830f580(0000) GS:ffff9ccc0dd80000(0000) knlGS:0000000000000000 [ 3.867394] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.867396] CR2: 0000560a77031410 CR3: 000000010f522000 CR4: 0000000000750ee0 [ 3.867398] PKRU: 55555554 [ 3.867399] Call Trace: [ 3.867401] <TASK> [ 3.867403] ? smu_cmn_send_smc_msg_with_param+0x98/0x240 [amdgpu] [ 3.867533] ? __mutex_lock+0x90/0x830 [ 3.867535] ? amdgpu_dpm_mode2_reset+0x37/0x60 [amdgpu] [ 3.867653] ? smu_cmn_send_smc_msg_with_param+0x98/0x240 [amdgpu] [ 3.867758] smu_cmn_send_smc_msg_with_param+0x98/0x240 [amdgpu] [ 3.867857] smu_mode2_reset+0x2b/0x50 [amdgpu] [ 3.867953] amdgpu_dpm_mode2_reset+0x46/0x60 [amdgpu] [ 3.868096] amdgpu_device_init.cold+0x1069/0x1e78 [amdgpu] [ 3.868219] ? _raw_spin_unlock_irqrestore+0x30/0x50 [ 3.868222] ? pci_conf1_read+0x9b/0xf0 [ 3.868226] amdgpu_driver_load_kms+0x15/0x110 [amdgpu] [ 3.868314] amdgpu_pci_probe+0x1a9/0x3c0 [amdgpu] [ 3.868398] local_pci_probe+0x41/0x80 [ 3.868401] pci_device_probe+0xab/0x200 [ 3.868404] really_probe+0x1a1/0x370 [ 3.868407] __driver_probe_device+0xfc/0x170 [ 3.868410] driver_probe_device+0x1f/0x90 [ 3.868412] __driver_attach+0xbf/0x1a0 [ 3.868414] ? __device_attach_driver+0xe0/0xe0 [ 3.868416] bus_for_each_dev+0x65/0x90 [ 3.868419] bus_add_driver+0x151/0x1f0 [ 3.868421] driver_register+0x89/0xd0 [ 3.868423] ? 0xffffffffc0bd4000 [ 3.868425] do_one_initcall+0x5d/0x300 [ 3.868428] ? do_init_module+0x22/0x240 [ 3.868431] ? rcu_read_lock_sched_held+0x3c/0x70 [ 3.868434] ? trace_kmalloc+0x30/0xe0 [ 3.868437] ? kmem_cache_alloc_trace+0x1e6/0x3a0 [ 3.868440] do_init_module+0x4a/0x240 [ 3.868442] __do_sys_finit_module+0x93/0xf0 [ 3.868446] do_syscall_64+0x5b/0x80 [ 3.868449] ? rcu_read_lock_sched_held+0x3c/0x70 [ 3.868451] ? lockdep_hardirqs_on_prepare+0xd9/0x180 [ 3.868454] ? do_syscall_64+0x67/0x80 [ 3.868456] ? do_syscall_64+0x67/0x80 [ 3.868458] ? do_syscall_64+0x67/0x80 [ 3.868460] ? do_syscall_64+0x67/0x80 [ 3.868462] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3.868465] RIP: 0033:0x7fc4d8ec1ced [ 3.868467] Code: 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fb 70 0e 00 f7 d8 64 89 01 48 [ 3.868472] RSP: 002b:00007fff687ae6b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 3.868475] RAX: ffffffffffffffda RBX: 0000560a76fbca60 RCX: 00007fc4d8ec1ced [ 3.868477] RDX: 0000000000000000 RSI: 00007fc4d902343c RDI: 0000000000000011 [ 3.868479] RBP: 00007fc4d902343c R08: 0000000000000000 R09: 0000560a76fb59c0 [ 3.868481] R10: 0000000000000011 R11: 0000000000000246 R12: 0000000000020000 [ 3.868484] R13: 0000560a76f8bfd0 R14: 0000000000000000 R15: 0000560a76fc2d10 [ 3.868487] </TASK> [ 3.868489] irq event stamp: 120617 [ 3.868490] hardirqs last enabled at (120617): [<ffffffff9817169e>] __up_console_sem+0x5e/0x70 [ 3.868494] hardirqs last disabled at (120616): [<ffffffff98171683>] __up_console_sem+0x43/0x70 [ 3.868497] softirqs last enabled at (119684): [<ffffffff980ee83a>] __irq_exit_rcu+0xca/0x100 [ 3.868501] softirqs last disabled at (119679): [<ffffffff980ee83a>] __irq_exit_rcu+0xca/0x100 [ 3.868504] ---[ end trace 0000000000000000 ]--- Signed-off-by:Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Xiaojian Du authored
This patch will add SMU v13.0.4 into the IP discovery list. Signed-off-by:
Xiaojian Du <Xiaojian.Du@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
-
Tim Huang authored
Enable the SMU IP v13.0.4 GFXOFF control Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
-
Tim Huang authored
Add the entry to set the ppt functions for SMU IP v13.0.4. Signed-off-by:
-
Tim Huang authored
Add swsmu ppt files for SMU IP v13.0.4. Signed-off-by:
-
Tim Huang authored
Add some common ppt functions that will be used by SMU IP v13.0.x and drop the not used function smu_v13_0_mode2_reset. Signed-off-by:
-
Tim Huang authored
The SMU needs this message to trigger IMU initialization. Signed-off-by:
-
Huang Rui authored
Add smu v13.0.4 driver SMU interface headers. v2: squash in the header updates (Alex) Signed-off-by:
-
