- 09 Sep, 2018 39 commits
-
-
Lars-Peter Clausen authored
commit 9a5094ca upstream. A sysfs write callback function needs to either return the number of consumed characters or an error. The ad952x_store() function currently returns 0 if the input value was "0", this will signal that no characters have been consumed and the function will be called repeatedly in a loop indefinitely. Fix this by returning number of supplied characters to indicate that the whole input string has been consumed. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Fixes: cd1678f9 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator") Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lars-Peter Clausen authored
commit 5a4e33c1 upstream. Fix the displayed phase for the ad9523 driver. Currently the most significant decimal place is dropped and all other digits are shifted one to the left. This is due to a multiplication by 10, which is not necessary, so remove it. Signed-off-by:
-
Gustavo A. R. Silva authored
commit c5b974be upstream. The IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY case is missing a return and will fall through to the default case and errorenously return -EINVAL. Fix this by adding in missing *return ret*. Fixes: 626f971b ("staging:iio:accel:sca3000 Add write support to the low pass filter control") Reported-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Dexuan Cui authored
commit d3b26dd7 upstream. Before setting channel->rescind in vmbus_rescind_cleanup(), we should make sure the channel callback won't run any more, otherwise a high-level driver like pci_hyperv, which may be infinitely waiting for the host VSP's response and notices the channel has been rescinded, can't safely give up: e.g., in hv_pci_protocol_negotiation() -> wait_for_response(), it's unsafe to exit from wait_for_response() and proceed with the on-stack variable "comp_pkt" popped. The issue was originally spotted by Michael Kelley <mikelley@microsoft.com>. In vmbus_close_internal(), the patch also minimizes the range protected by disabling/enabling channel->callback_event: we don't really need that for the whole function. Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Michael Kelley <mikelley@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Tycho Andersen authored
commit a5ba1d95 upstream. We have reports of the following crash: PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0" #0 [ffff88085c6db710] machine_kexec at ffffffff81046239 #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248 #2 [ffff88085c6db830] oops_end at ffffffff81008ae7 #3 [ffff88085c6db860] no_context at ffffffff81050b8f #4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75 #5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83 #6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e #7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c #8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122 [exception RIP: uart_put_char+149] RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006 RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081 RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120 RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320 R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000 R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544 #10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c #11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b #12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2 #13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b #14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a #15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016 #16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194 #17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a #18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2 #19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d #20 [ffff88085c6dbeb0] kthread at ffffffff81096384 #21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f after slogging through some dissasembly: ffffffff814b6720 <uart_put_char>: ffffffff814b6720: 55 push %rbp ffffffff814b6721: 48 89 e5 mov %rsp,%rbp ffffffff814b6724: 48 83 ec 20 sub $0x20,%rsp ffffffff814b6728: 48 89 1c 24 mov %rbx,(%rsp) ffffffff814b672c: 4c 89 64 24 08 mov %r12,0x8(%rsp) ffffffff814b6731: 4c 89 6c 24 10 mov %r13,0x10(%rsp) ffffffff814b6736: 4c 89 74 24 18 mov %r14,0x18(%rsp) ffffffff814b673b: e8 b0 8e 58 00 callq ffffffff81a3f5f0 <mcount> ffffffff814b6740: 4c 8b a7 88 02 00 00 mov 0x288(%rdi),%r12 ffffffff814b6747: 45 31 ed xor %r13d,%r13d ffffffff814b674a: 41 89 f6 mov %esi,%r14d ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq $0x0,0x170(%r12) ffffffff814b6754: 00 00 ffffffff814b6756: 49 8b 9c 24 80 01 00 mov 0x180(%r12),%rbx ffffffff814b675d: 00 ffffffff814b675e: 74 2f je ffffffff814b678f <uart_put_char+0x6f> ffffffff814b6760: 48 89 df mov %rbx,%rdi ffffffff814b6763: e8 a8 67 58 00 callq ffffffff81a3cf10 <_raw_spin_lock_irqsave> ffffffff814b6768: 41 8b 8c 24 78 01 00 mov 0x178(%r12),%ecx ffffffff814b676f: 00 ffffffff814b6770: 89 ca mov %ecx,%edx ffffffff814b6772: f7 d2 not %edx ffffffff814b6774: 41 03 94 24 7c 01 00 add 0x17c(%r12),%edx ffffffff814b677b: 00 ffffffff814b677c: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b6782: 75 23 jne ffffffff814b67a7 <uart_put_char+0x87> ffffffff814b6784: 48 89 c6 mov %rax,%rsi ffffffff814b6787: 48 89 df mov %rbx,%rdi ffffffff814b678a: e8 e1 64 58 00 callq ffffffff81a3cc70 <_raw_spin_unlock_irqrestore> ffffffff814b678f: 44 89 e8 mov %r13d,%eax ffffffff814b6792: 48 8b 1c 24 mov (%rsp),%rbx ffffffff814b6796: 4c 8b 64 24 08 mov 0x8(%rsp),%r12 ffffffff814b679b: 4c 8b 6c 24 10 mov 0x10(%rsp),%r13 ffffffff814b67a0: 4c 8b 74 24 18 mov 0x18(%rsp),%r14 ffffffff814b67a5: c9 leaveq ffffffff814b67a6: c3 retq ffffffff814b67a7: 49 8b 94 24 70 01 00 mov 0x170(%r12),%rdx ffffffff814b67ae: 00 ffffffff814b67af: 48 63 c9 movslq %ecx,%rcx ffffffff814b67b2: 41 b5 01 mov $0x1,%r13b ffffffff814b67b5: 44 88 34 0a mov %r14b,(%rdx,%rcx,1) ffffffff814b67b9: 41 8b 94 24 78 01 00 mov 0x178(%r12),%edx ffffffff814b67c0: 00 ffffffff814b67c1: 83 c2 01 add $0x1,%edx ffffffff814b67c4: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b67ca: 41 89 94 24 78 01 00 mov %edx,0x178(%r12) ffffffff814b67d1: 00 ffffffff814b67d2: eb b0 jmp ffffffff814b6784 <uart_put_char+0x64> ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) ffffffff814b67db: 00 00 00 00 00 for our build, this is crashing at: circ->buf[circ->head] = c; Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf) protected by the "per-port mutex", which based on uart_port_check() is state->port.mutex. Indeed, the lock acquired in uart_put_char() is uport->lock, i.e. not the same lock. Anyway, since the lock is not acquired, if uart_shutdown() is called, the last chunk of that function may release state->xmit.buf before its assigned to null, and cause the race above. To fix it, let's lock uport->lock when allocating/deallocating state->xmit.buf in addition to the per-port mutex. v2: switch to locking uport->lock on allocation/deallocation instead of locking the per-port mutex in uart_put_char. Note that since uport->lock is a spin lock, we have to switch the allocation to GFP_ATOMIC. v3: move the allocation outside the lock, so we can switch back to GFP_KERNEL Signed-off-by:
Tycho Andersen <tycho@tycho.ws> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Mikulas Patocka authored
commit bc9e9cf0 upstream. dm-crypt should only increase device limits, it should not decrease them. This fixes a bug where the user could creates a crypt device with 1024 sector size on the top of scsi device that had 4096 logical block size. The limit 4096 would be lost and the user could incorrectly send 1024-I/Os to the crypt device. Cc: stable@vger.kernel.org Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit 5b1fe7be upstream. Quoting Documentation/device-mapper/cache.txt: The 'dirty' state for a cache block changes far too frequently for us to keep updating it on the fly. So we treat it as a hint. In normal operation it will be written when the dm device is suspended. If the system crashes all cache blocks will be assumed dirty when restarted. This got broken in commit f177940a ("dm cache metadata: switch to using the new cursor api for loading metadata") in 4.9, which removed the code that consulted cmd->clean_when_opened (CLEAN_SHUTDOWN on-disk flag) when loading cache blocks. This results in data corruption on an unclean shutdown with dirty cache blocks on the fast device. After the crash those blocks are considered clean and may get evicted from the cache at any time. This can be demonstrated by doing a lot of reads to trigger individual evictions, but uncache is more predictable: ### Disable auto-activation in lvm.conf to be able to do uncache in ### time (i.e. see uncache doing flushing) when the fix is applied. # xfs_io -d -c 'pwrite -b 4M -S 0xaa 0 1G' /dev/vdb # vgcreate vg_cache /dev/vdb /dev/vdc # lvcreate -L 1G -n lv_slowdev vg_cache /dev/vdb # lvcreate -L 512M -n lv_cachedev vg_cache /dev/vdc # lvcreate -L 256M -n lv_metadev vg_cache /dev/vdc # lvconvert --type cache-pool --cachemode writeback vg_cache/lv_cachedev --poolmetadata vg_cache/lv_metadev # lvconvert --type cache vg_cache/lv_slowdev --cachepool vg_cache/lv_cachedev # xfs_io -d -c 'pwrite -b 4M -S 0xbb 0 512M' /dev/mapper/vg_cache-lv_slowdev # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2 0fe00000: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ 0fe00010: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ # dmsetup status vg_cache-lv_slowdev 0 2097152 cache 8 27/65536 128 8192/8192 1 100 0 0 0 8192 7065 2 metadata2 writeback 2 migration_threshold 2048 smq 0 rw - ^^^^ 7065 * 64k = 441M yet to be written to the slow device # echo b >/proc/sysrq-trigger # vgchange -ay vg_cache # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2 0fe00000: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ 0fe00010: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ # lvconvert --uncache vg_cache/lv_slowdev Flushing 0 blocks for cache vg_cache/lv_slowdev. Logical volume "lv_cachedev" successfully removed Logical volume vg_cache/lv_slowdev is not cached. # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2 0fe00000: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ 0fe00010: aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa ................ This is the case with both v1 and v2 cache pool metatata formats. After applying this patch: # vgchange -ay vg_cache # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2 0fe00000: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ 0fe00010: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ # lvconvert --uncache vg_cache/lv_slowdev Flushing 3724 blocks for cache vg_cache/lv_slowdev. ... Flushing 71 blocks for cache vg_cache/lv_slowdev. Logical volume "lv_cachedev" successfully removed Logical volume vg_cache/lv_slowdev is not cached. # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2 0fe00000: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ 0fe00010: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ Cc: stable@vger.kernel.org Fixes: f177940a ("dm cache metadata: switch to using the new cursor api for loading metadata") Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Mike Snitzer authored
commit fd2fa954 upstream. policy_hint_size starts as 0 during __write_initial_superblock(). It isn't until the policy is loaded that policy_hint_size is set in-core (cmd->policy_hint_size). But it never got recorded in the on-disk superblock because __commit_transaction() didn't deal with transfering the in-core cmd->policy_hint_size to the on-disk superblock. The in-core cmd->policy_hint_size gets initialized by metadata_open()'s __begin_transaction_flags() which re-reads all superblock fields. Because the superblock's policy_hint_size was never properly stored, when the cache was created, hints_array_available() would always return false when re-activating a previously created cache. This means __load_mappings() always considered the hints invalid and never made use of the hints (these hints served to optimize). Another detremental side-effect of this oversight is the cache_check utility would fail with: "invalid hint width: 0" Cc: stable@vger.kernel.org Signed-off-by:
-
Hou Tao authored
commit 75294442 upstream. Now both check_for_space() and do_no_space_timeout() will read & write pool->pf.error_if_no_space. If these functions run concurrently, as shown in the following case, the default setting of "queue_if_no_space" can get lost. precondition: * error_if_no_space = false (aka "queue_if_no_space") * pool is in Out-of-Data-Space (OODS) mode * no_space_timeout worker has been queued CPU 0: CPU 1: // delete a thin device process_delete_mesg() // check_for_space() invoked by commit() set_pool_mode(pool, PM_WRITE) pool->pf.error_if_no_space = \ pt->requested_pf.error_if_no_space // timeout, pool is still in OODS mode do_no_space_timeout // "queue_if_no_space" config is lost pool->pf.error_if_no_space = true pool->pf.mode = new_mode Fix it by stopping no_space_timeout worker when switching to write mode. Fixes: bcc696fa ("dm thin: stay in out-of-data-space mode once no_space_timeout expires") Cc: stable@vger.kernel.org Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
-
Mikulas Patocka authored
commit c21b1639 upstream. Early alpha processors can't write a byte or short atomically - they read 8 bytes, modify the byte or two bytes in registers and write back 8 bytes. The modification of the variable "suspending" may race with modification of the variable "failed". Fix this by changing "suspending" to an int. Cc: stable@vger.kernel.org Signed-off-by:
-
Tomas Bortoli authored
commit 430ac66e upstream. The patch adds the flush in p9_mux_poll_stop() as it the function used by p9_conn_destroy(), in turn called by p9_fd_close() to stop the async polling associated with the data regarding the connection. Link: http://lkml.kernel.org/r/20180720092730.27104-1-tomasbortoli@gmail.comSigned-off-by:
Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+39749ed7d9ef6dfb23f6@syzkaller.appspotmail.com To: Eric Van Hensbergen <ericvh@gmail.com> To: Ron Minnich <rminnich@sandia.gov> To: Latchesar Ionkov <lucho@ionkov.net> Cc: Yiwen Jiang <jiangyiwen@huwei.com> Cc: stable@vger.kernel.org Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
-
Tomas Bortoli authored
commit 7913690d upstream. The p9_client_version() does not initialize the version pointer. If the call to p9pdu_readf() returns an error and version has not been allocated in p9pdu_readf(), then the program will jump to the "error" label and will try to free the version pointer. If version is not initialized, free() will be called with uninitialized, garbage data and will provoke a crash. Link: http://lkml.kernel.org/r/20180709222943.19503-1-tomasbortoli@gmail.comSigned-off-by:
Jun Piao <piaojun@huawei.com> Reviewed-by:
Yiwen Jiang <jiangyiwen@huawei.com> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Signed-off-by:
-
jiangyiwen authored
commit 23cba9cb upstream. Because the value of limit is VIRTQUEUE_NUM, if index is equal to limit, it will cause sg array out of bounds, so correct the judgement of BUG_ON. Link: http://lkml.kernel.org/r/5B63D5F6.6080109@huawei.comSigned-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
piaojun authored
commit 3111784b upstream. In my testing, v9fs_fid_xattr_set will return successfully even if the backend ext4 filesystem has no space to store xattr key-value. That will cause inconsistent behavior between front end and back end. The reason is that lsetxattr will be triggered by p9_client_clunk, and unfortunately we did not catch the error. This patch will catch the error to notify upper caller. p9_client_clunk (in 9p) p9_client_rpc(clnt, P9_TCLUNK, "d", fid->fid); v9fs_clunk (in qemu) put_fid free_fid v9fs_xattr_fid_clunk v9fs_co_lsetxattr s->ops->lsetxattr ext4_xattr_user_set (in host ext4 filesystem) Link: http://lkml.kernel.org/r/5B57EACC.2060900@huawei.comSigned-off-by:
-
Tomas Bortoli authored
commit 10aa1452 upstream. Added checks to prevent GPFs from raising. Link: http://lkml.kernel.org/r/20180727110558.5479-1-tomasbortoli@gmail.comSigned-off-by:
-
Bart Van Assche authored
commit 61b717d0 upstream. Every function that returns COMPST_ERROR must set wqe->status to another value than IB_WC_SUCCESS before returning COMPST_ERROR. Fix the only code path for which this is not yet the case. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: <stable@vger.kernel.org> Reviewed-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Bart Van Assche authored
commit 99525095 upstream. Avoid that KASAN reports the following: BUG: KASAN: use-after-free in srpt_close_ch+0x4f/0x1b0 [ib_srpt] Read of size 4 at addr ffff880151180cb8 by task check/4681 CPU: 15 PID: 4681 Comm: check Not tainted 4.18.0-rc2-dbg+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 srpt_close_ch+0x4f/0x1b0 [ib_srpt] srpt_set_enabled+0xf7/0x1e0 [ib_srpt] srpt_tpg_enable_store+0xb8/0x120 [ib_srpt] configfs_write_file+0x14e/0x1d0 [configfs] __vfs_write+0xd2/0x3b0 vfs_write+0x101/0x270 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: aaf45bd8 ("IB/srpt: Detect session shutdown reliably") Signed-off-by:
-
Vaibhav Jain authored
commit ef6cb5f1 upstream. Function atomic_inc_unless_negative() returns a bool to indicate success/failure. However cxl_adapter_context_get() wrongly compares the return value against '>=0' which will always be true. The patch fixes this comparison to '==0' there by also fixing this compile time warning: drivers/misc/cxl/main.c:290 cxl_adapter_context_get() warn: 'atomic_inc_unless_negative(&adapter->contexts_num)' is unsigned Fixes: 70b565bb ("cxl: Prevent adapter reset if an active context exists") Cc: stable@vger.kernel.org # v4.9+ Reported-by:
Vaibhav Jain <vaibhav@linux.ibm.com> Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit db217319 upstream. The generic code is racy when multiple children of a PCI bridge try to enable it simultaneously. This leads to drivers trying to access a device through a not-yet-enabled bridge, and this EEH errors under various circumstances when using parallel driver probing. There is work going on to fix that properly in the PCI core but it will take some time. x86 gets away with it because (outside of hotplug), the BIOS enables all the bridges at boot time. This patch does the same thing on powernv by enabling all bridges that have child devices at boot time, thus avoiding subsequent races. It's suitable for backporting to stable and distros, while the proper PCI fix will probably be significantly more invasive. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Frederick Lawler authored
commit 7506dc79 upstream. Add PCI-specific dev_printk() wrappers and use them to simplify the code slightly. No functional change intended. Signed-off-by:
Frederick Lawler <fred@fredlawl.com> [bhelgaas: squash into one patch] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> [only take the pci.h portion of this patch, to make backporting stuff easier over time - gregkh] Signed-off-by:
-
Mahesh Salgaonkar authored
commit cd813e1c upstream. During Machine Check interrupt on pseries platform, register r3 points RTAS extended event log passed by hypervisor. Since hypervisor uses r3 to pass pointer to rtas log, it stores the original r3 value at the start of the memory (first 8 bytes) pointed by r3. Since hypervisor stores this info and rtas log is in BE format, linux should make sure to restore r3 value in correct endian format. Without this patch when MCE handler, after recovery, returns to code that that caused the MCE may end up with Data SLB access interrupt for invalid address followed by kernel panic or hang. Severe Machine check interrupt [Recovered] NIP [d00000000ca301b8]: init_module+0x1b8/0x338 [bork_kernel] Initiator: CPU Error type: SLB [Multihit] Effective address: d00000000ca70000 cpu 0xa: Vector: 380 (Data SLB Access) at [c0000000fc7775b0] pc: c0000000009694c0: vsnprintf+0x80/0x480 lr: c0000000009698e0: vscnprintf+0x20/0x60 sp: c0000000fc777830 msr: 8000000002009033 dar: a803a30c000000d0 current = 0xc00000000bc9ef00 paca = 0xc00000001eca5c00 softe: 3 irq_happened: 0x01 pid = 8860, comm = insmod vscnprintf+0x20/0x60 vprintk_emit+0xb4/0x4b0 vprintk_func+0x5c/0xd0 printk+0x38/0x4c init_module+0x1c0/0x338 [bork_kernel] do_one_initcall+0x54/0x230 do_init_module+0x8c/0x248 load_module+0x12b8/0x15b0 sys_finit_module+0xa8/0x110 system_call+0x58/0x6c --- Exception: c00 (System Call) at 00007fff8bda0644 SP (7fffdfbfe980) is in userspace This patch fixes this issue. Fixes: a08a53ea ("powerpc/le: Enable RTAS events support") Cc: stable@vger.kernel.org # v3.15+ Reviewed-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Hari Bathini authored
commit 1bd6a1c4 upstream. Crash memory ranges is an array of memory ranges of the crashing kernel to be exported as a dump via /proc/vmcore file. The size of the array is set based on INIT_MEMBLOCK_REGIONS, which works alright in most cases where memblock memory regions count is less than INIT_MEMBLOCK_REGIONS value. But this count can grow beyond INIT_MEMBLOCK_REGIONS value since commit 142b45a7 ("memblock: Add array resizing support"). On large memory systems with a few DLPAR operations, the memblock memory regions count could be larger than INIT_MEMBLOCK_REGIONS value. On such systems, registering fadump results in crash or other system failures like below: task: c00007f39a290010 ti: c00000000b738000 task.ti: c00000000b738000 NIP: c000000000047df4 LR: c0000000000f9e58 CTR: c00000000010f180 REGS: c00000000b73b570 TRAP: 0300 Tainted: G L X (4.4.140+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22004484 XER: 20000000 CFAR: c000000000008500 DAR: 000007a450000000 DSISR: 40000000 SOFTE: 0 ... NIP [c000000000047df4] smp_send_reschedule+0x24/0x80 LR [c0000000000f9e58] resched_curr+0x138/0x160 Call Trace: resched_curr+0x138/0x160 (unreliable) check_preempt_curr+0xc8/0xf0 ttwu_do_wakeup+0x38/0x150 try_to_wake_up+0x224/0x4d0 __wake_up_common+0x94/0x100 ep_poll_callback+0xac/0x1c0 __wake_up_common+0x94/0x100 __wake_up_sync_key+0x70/0xa0 sock_def_readable+0x58/0xa0 unix_stream_sendmsg+0x2dc/0x4c0 sock_sendmsg+0x68/0xa0 ___sys_sendmsg+0x2cc/0x2e0 __sys_sendmsg+0x5c/0xc0 SyS_socketcall+0x36c/0x3f0 system_call+0x3c/0x100 as array index overflow is not checked for while setting up crash memory ranges causing memory corruption. To resolve this issue, dynamically allocate memory for crash memory ranges and resize it incrementally, in units of pagesize, on hitting array size limit. Fixes: 2df173d9 ("fadump: Initialize elfcore header and add PT_LOAD program headers.") Cc: stable@vger.kernel.org # v3.4+ Signed-off-by:
Hari Bathini <hbathini@linux.ibm.com> Reviewed-by:
-
Yannik Sembritzki authored
commit ea93102f upstream. The split of .system_keyring into .builtin_trusted_keys and .secondary_trusted_keys broke kexec, thereby preventing kernels signed by keys which are now in the secondary keyring from being kexec'd. Fix this by passing VERIFY_USE_SECONDARY_KEYRING to verify_pefile_signature(). Fixes: d3bfe841 ("certs: Add a secondary system keyring that can be added to dynamically") Signed-off-by:
Yannik Sembritzki <yannik@sembritzki.me> Signed-off-by:
David Howells <dhowells@redhat.com> Cc: kexec@lists.infradead.org Cc: keyrings@vger.kernel.org Cc: linux-security-module@vger.kernel.org Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Yannik Sembritzki authored
commit 817aef26 upstream. Replace the use of a magic number that indicates that verify_*_signature() should use the secondary keyring with a symbol. Signed-off-by:
-
Gustavo A. R. Silva authored
commit 3512a18c upstream. There is a potential execution path in which function platform_get_resource() returns NULL. If this happens, we will end up having a NULL pointer dereference. Fix this by replacing devm_ioremap with devm_ioremap_resource, which has the NULL check and the memory region request. This code was detected with the help of Coccinelle. Cc: stable@vger.kernel.org Fixes: f700e84f ("mailbox: Add support for APM X-Gene platform mailbox driver") Signed-off-by:
Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by:
-
Javier Martinez Canillas authored
commit 1831af09 upstream. This reverts commit 0866df8d. The v4l uAPI documentation [0] makes clear that in the case of interlaced video (i.e: field is V4L2_FIELD_ALTERNATE) the height refers to the number of lines in the field and not the number of lines in the full frame (which is twice the field height for interlaced formats). So the original height calculation was correct, and it shouldn't had been changed by the mentioned commit. [0]:https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/subdev-formats.html Fixes: 0866df8d ("[media] tvp5150: fix pad format frame height") Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Daniel Mack authored
commit 7444a809 upstream. Prior to commit 573185cc ("mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus"), the MMC core used to call into the power management functions of SDIO clients itself and removed the card if the return code was non-zero. IOW, the mmc handled errors gracefully and didn't upchain them to the pm core. Since this change, the mmc core relies on generic power management functions which treat all errors as a reason to cancel the suspend immediately. This causes suspend attempts to fail when the libertas driver is loaded. To fix this, power down the card explicitly in if_sdio_suspend() when we know we're about to lose power and return success. Also set a flag in these cases, and power up the card again in if_sdio_resume(). Fixes: 573185cc ("mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus") Cc: <stable@vger.kernel.org> Signed-off-by:
Daniel Mack <daniel@zonque.org> Reviewed-by:
Chris Ball <chris@printf.net> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Matthew Auld authored
commit c11c7bfd upstream. Operating on a zero sized GEM userptr object will lead to explosions. Fixes: 5cc9ed4b ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl") Testcase: igt/gem_userptr_blits/input-checking Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Ming Lei authored
commit b233f127 upstream. Runtime PM isn't ready for blk-mq yet, and commit 765e40b6 ("block: disable runtime-pm for blk-mq") tried to disable it. Unfortunately, it can't take effect in that way since user space still can switch it on via 'echo auto > /sys/block/sdN/device/power/control'. This patch disables runtime-pm for blk-mq really by pm_runtime_disable() and fixes all kinds of PM related kernel crash. Cc: Tomas Janousek <tomi@nomi.cz> Cc: Przemek Socha <soprwa@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <stable@vger.kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Patrick Steinhardt <ps@pks.im> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
xiao jin authored
commit 54648cf1 upstream. We find the memory use-after-free issue in __blk_drain_queue() on the kernel 4.14. After read the latest kernel 4.18-rc6 we think it has the same problem. Memory is allocated for q->fq in the blk_init_allocated_queue(). If the elevator init function called with error return, it will run into the fail case to free the q->fq. Then the __blk_drain_queue() uses the same memory after the free of the q->fq, it will lead to the unpredictable event. The patch is to set q->fq as NULL in the fail case of blk_init_allocated_queue(). Fixes: commit 7c94e1c1 ("block: introduce blk_flush_queue to drive flush machinery") Cc: <stable@vger.kernel.org> Reviewed-by:
xiao jin <jin.xiao@intel.com> Signed-off-by:
-
Markus Stockhausen authored
commit dc30b96a upstream. ondemand_readahead() checks bdi->io_pages to cap the maximum pages that need to be processed. This works until the readit section. If we would do an async only readahead (async size = sync size) and target is at beginning of window we expand the pages by another get_next_ra_size() pages. Btrace for large reads shows that kernel always issues a doubled size read at the beginning of processing. Add an additional check for io_pages in the lower part of the func. The fix helps devices that hard limit bio pages and rely on proper handling of max_hw_read_sectors (e.g. older FusionIO cards). For that reason it could qualify for stable. Fixes: 9491ae4a ("mm: don't cap request size based on read-ahead setting") Cc: stable@vger.kernel.org Signed-off-by: Markus Stockhausen stockhausen@collogia.de Signed-off-by:
-
Sergei Shtylyov authored
commit 9faf870e upstream. The DM_CM_RST register actually has bits 0-31 defaulting to 1s and bits 32-63 defaulting to 0s -- fix off-by-one in #define RST_RESERVED_BITS. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Fixes: 2a68ea78 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
-
Janek Kotas authored
commit 931c4e9a upstream. The path "spi: cadence: Add usleep_range() for cdns_spi_fill_tx_fifo()" added a usleep_range() function call, which cannot be used in atomic context. However the cdns_spi_fill_tx_fifo() function can be called during an interrupt which may result in a kernel panic: BUG: scheduling while atomic: grep/561/0x00010002 Modules linked in: Preemption disabled at: [<ffffff800858ea28>] wait_for_common+0x48/0x178 CPU: 0 PID: 561 Comm: grep Not tainted 4.17.0 #1 Hardware name: Cadence CSP (DT) Call trace: dump_backtrace+0x0/0x198 show_stack+0x14/0x20 dump_stack+0x8c/0xac __schedule_bug+0x6c/0xb8 __schedule+0x570/0x5d8 schedule+0x34/0x98 schedule_hrtimeout_range_clock+0x98/0x110 schedule_hrtimeout_range+0x10/0x18 usleep_range+0x64/0x98 cdns_spi_fill_tx_fifo+0x70/0xb0 cdns_spi_irq+0xd0/0xe0 __handle_irq_event_percpu+0x9c/0x128 handle_irq_event_percpu+0x34/0x88 handle_irq_event+0x48/0x78 handle_fasteoi_irq+0xbc/0x1b0 generic_handle_irq+0x24/0x38 __handle_domain_irq+0x84/0xf8 gic_handle_irq+0xc4/0x180 This patch replaces the function call with udelay() which can be used in an atomic context, like an interrupt. Signed-off-by:
Jan Kotas <jank@cadence.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Krzysztof Kozlowski authored
commit d8ffee2f upstream. Registers of DSPI should not be accessed before enabling its clock. On Toradex Colibri VF50 on Iris carrier board this could be seen during bootup as imprecise abort: Unhandled fault: imprecise external abort (0x1c06) at 0x00000000 Internal error: : 1c06 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) Backtrace: [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc) [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8) [<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8) [<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4) [<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4) [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28) [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218) [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100) [<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50) [<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20) [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174) [<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8) [<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114) [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c) Cc: <stable@vger.kernel.org> Fixes: 5ee67b58 ("spi: dspi: clear SPI_SR before enable interrupt") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Mika Westerberg authored
commit 22d71a50 upstream. Intel Ice Lake SPI host controller follows the Intel Cannon Lake but the PCI IDs are different. Add the new PCI IDs to the driver supported devices list. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
-
Bartosz Golaszewski authored
commit 563a53f3 upstream. On non-OF systems spi->controlled_data may be NULL. This causes a NULL pointer derefence on dm365-evm. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Chirantan Ekbote authored
commit d28c756c upstream. The zero-copy optimization when reading or writing large chunks of data is quite useful. However, the 9p messages created through the zero-copy write path have an incorrect message size: it should be the size of the header + size of the data being written but instead it's just the size of the header. This only works if the server ignores the size field of the message and otherwise breaks the framing of the protocol. Fix this by re-writing the message size field with the correct value. Tested by running `dd if=/dev/zero of=out bs=4k count=1` inside a virtio-9p mount. Link: http://lkml.kernel.org/r/20180717003529.114368-1-chirantan@chromium.orgSigned-off-by:
Chirantan Ekbote <chirantan@chromium.org> Reviewed-by:
Greg Kurz <groug@kaod.org> Tested-by:
-
Alexander Aring authored
commit f9c52831 upstream. This patch is necessary if case of AF_PACKET or other socket interface which I am aware of it and didn't allocated the necessary room. Reported-by:
David Palma <david.palma@ntnu.no> Reported-by:
Rabi Narayan Sahoo <rabinarayans0828@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Alexander Aring <aring@mojatatu.com> Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Alexander Aring authored
commit ac74f87c upstream. This patch fixes patch add handling to take care tail and headroom for single 6lowpan frames. We need to be sure we have a skb with the right head and tailroom for single frames. This patch do it by using skb_copy_expand() if head and tailroom is not enough allocated by upper layer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195059Reported-by:
-
- 05 Sep, 2018 1 commit
-
-
Greg Kroah-Hartman authored
-
