Skip to content

L
linux
Switch branch/tag
  1. 08 Nov, 2022 9 commits
  3. 07 Nov, 2022 7 commits
    • Alexander Potapenko's avatar
      ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to network · c23fb2c8
      Alexander Potapenko authored 
      When copying a `struct ifaddrlblmsg` to the network, __ifal_reserved
remained uninitialized, resulting in a 1-byte infoleak:

  BUG: KMSAN: kernel-network-infoleak in __netdev_start_xmit ./include/linux/netdevice.h:4841
   __netdev_start_xmit ./include/linux/netdevice.h:4841
   netdev_start_xmit ./include/linux/netdevice.h:4857
   xmit_one net/core/dev.c:3590
   dev_hard_start_xmit+0x1dc/0x800 net/core/dev.c:3606
   __dev_queue_xmit+0x17e8/0x4350 net/core/dev.c:4256
   dev_queue_xmit ./include/linux/netdevice.h:3009
   __netlink_deliver_tap_skb net/netlink/af_netlink.c:307
   __netlink_deliver_tap+0x728/0xad0 net/netlink/af_netlink.c:325
   netlink_deliver_tap net/netlink/af_netlink.c:338
   __netlink_sendskb net/netlink/af_netlink.c:1263
   netlink_sendskb+0x1d9/0x200 net/netlink/af_netlink.c:1272
   netlink_unicast+0x56d/0xf50 net/netlink/af_netlink.c:1360
   nlmsg_unicast ./include/net/netlink.h:1061
   rtnl_unicast+0x5a/0x80 net/core/rtnetlink.c:758
   ip6addrlbl_get+0xfad/0x10f0 net/ipv6/addrlabel.c:628
   rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082
  ...
  Uninit was created at:
   slab_post_alloc_hook+0x118/0xb00 mm/slab.h:742
   slab_alloc_node mm/slub.c:3398
   __kmem_cache_alloc_node+0x4f2/0x930 mm/slub.c:3437
   __do_kmalloc_node mm/slab_common.c:954
   __kmalloc_node_track_caller+0x117/0x3d0 mm/slab_common.c:975
   kmalloc_reserve net/core/skbuff.c:437
   __alloc_skb+0x27a/0xab0 net/core/skbuff.c:509
   alloc_skb ./include/linux/skbuff.h:1267
   nlmsg_new ./include/net/netlink.h:964
   ip6addrlbl_get+0x490/0x10f0 net/ipv6/addrlabel.c:608
   rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082
   netlink_rcv_skb+0x299/0x550 net/netlink/af_netlink.c:2540
   rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6109
   netlink_unicast_kernel net/netlink/af_netlink.c:1319
   netlink_unicast+0x9ab/0xf50 net/netlink/af_netlink.c:1345
   netlink_sendmsg+0xebc/0x10f0 net/netlink/af_netlink.c:1921
  ...

This patch ensures that the reserved field is always initialized.

Reported-by: syzbot+3553517af6020c4f2813f1003fe76ef3cbffe98d@syzkaller.appspotmail.com
Fixes: 2a8cc6c8 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.")
Signed-off-by: default avatarAlexander Potapenko <glider@google.com>
Reviewed-by: default avatarDavid Ahern <dsahern@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c23fb2c8
    • Lu Wei's avatar
      tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent · 0c175da7
      Lu Wei authored 
      If setsockopt with option name of TCP_REPAIR_OPTIONS and opt_code
of TCPOPT_SACK_PERM is called to enable sack after data is sent
and dupacks are received , it will trigger a warning in function
tcp_verify_left_out() as follows:

============================================
WARNING: CPU: 8 PID: 0 at net/ipv4/tcp_input.c:2132
tcp_timeout_mark_lost+0x154/0x160
tcp_enter_loss+0x2b/0x290
tcp_retransmit_timer+0x50b/0x640
tcp_write_timer_handler+0x1c8/0x340
tcp_write_timer+0xe5/0x140
call_timer_fn+0x3a/0x1b0
__run_timers.part.0+0x1bf/0x2d0
run_timer_softirq+0x43/0xb0
__do_softirq+0xfd/0x373
__irq_exit_rcu+0xf6/0x140

The warning is caused in the following steps:
1. a socket named socketA is created
2. socketA enters repair mode without build a connection
3. socketA calls connect() and its state is changed to TCP_ESTABLISHED
   directly
4. socketA leaves repair mode
5. socketA calls sendmsg() to send data, packets_out and sack_outs(dup
   ack receives) increase
6. socketA enters repair mode again
7. socketA calls setsockopt with TCPOPT_SACK_PERM to enable sack
8. retransmit timer expires, it calls tcp_timeout_mark_lost(), lost_out
   increases
9. sack_outs + lost_out > packets_out triggers since lost_out and
   sack_outs increase repeatly

In function tcp_timeout_mark_lost(), tp->sacked_out will be cleared if
Step7 not happen and the warning will not be triggered. As suggested by
Denis and Eric, TCP_REPAIR_OPTIONS should be prohibited if data was
already sent.

socket-tcp tests in CRIU has been tested as follows:
$ sudo ./test/zdtm.py run -t zdtm/static/socket-tcp*  --keep-going \
       --ignore-taint

socket-tcp* represent all socket-tcp tests in test/zdtm/static/.

Fixes: b139ba4e ("tcp: Repair connection-time negotiated parameters")
Signed-off-by: default avatarLu Wei <luwei32@huawei.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0c175da7
    • Zhaoping Shu's avatar
      net: wwan: iosm: Remove unnecessary if_mutex lock · f9027f88
      Zhaoping Shu authored 
      These WWAN network interface operations (create/delete/open/close)
are already protected by RTNL lock, i.e., wwan_ops.newlink(),
wwan_ops.dellink(), net_device_ops.ndo_open() and
net_device.ndo_stop() are called with RTNL lock held.
Therefore, this patch removes the unnecessary if_mutex.
Signed-off-by: default avatarZhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f9027f88
    • HW He's avatar
      net: wwan: mhi: fix memory leak in mhi_mbim_dellink · 668205b9
      HW He authored 
      MHI driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.

This patch sets needs_free_netdev to true when registers
network device, which makes netdev subsystem call free_netdev()
automatically after unregister_netdevice().

Fixes: aa730a99 ("net: wwan: Add MHI MBIM network driver")
Signed-off-by: default avatarHW He <hw.he@mediatek.com>
Signed-off-by: default avatarZhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      668205b9
    • HW He's avatar
      net: wwan: iosm: fix memory leak in ipc_wwan_dellink · f25caaca
      HW He authored 
      IOSM driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.

This patch sets needs_free_netdev to true when registers
network device, which makes netdev subsystem call free_netdev()
automatically after unregister_netdevice().

Fixes: 2a54f2c7 ("net: iosm: net driver")
Signed-off-by: default avatarHW He <hw.he@mediatek.com>
Reviewed-by: default avatarLoic Poulain <loic.poulain@linaro.org>
Signed-off-by: default avatarZhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f25caaca
    • Zhengchao Shao's avatar
      hamradio: fix issue of dev reference count leakage in bpq_device_event() · 85cbaf03
      Zhengchao Shao authored 
      When following tests are performed, it will cause dev reference counting
leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2

When new bond device is created, the default type of the bond device is
ether. And the bond device is up, bpq_device_event() receives the message
and creates a new bpq device. In this case, the reference count value of
dev is hold once. But after "ifenslave -f bond2 rose1" command is
executed, the type of the bond device is changed to rose. When the bond
device is unregistered, bpq_device_event() will not put the dev reference
count.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: default avatarZhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      85cbaf03
    • Zhengchao Shao's avatar
      net: lapbether: fix issue of dev reference count leakage in lapbeth_device_event() · 531705a7
      Zhengchao Shao authored 
      When following tests are performed, it will cause dev reference counting
leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2

When new bond device is created, the default type of the bond device is
ether. And the bond device is up, lapbeth_device_event() receives the
message and creates a new lapbeth device. In this case, the reference
count value of dev is hold once. But after "ifenslave -f bond2 rose1"
command is executed, the type of the bond device is changed to rose. When
the bond device is unregistered, lapbeth_device_event() will not put the
dev reference count.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: default avatarZhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      531705a7
  5. 05 Nov, 2022 6 commits
  7. 04 Nov, 2022 15 commits
    • Wang Yufen's avatar
      net: tun: Fix memory leaks of napi_get_frags · 1118b204
      Wang Yufen authored 
      kmemleak reports after running test_progs:

unreferenced object 0xffff8881b1672dc0 (size 232):
  comm "test_progs", pid 394388, jiffies 4354712116 (age 841.975s)
  hex dump (first 32 bytes):
    e0 84 d7 a8 81 88 ff ff 80 2c 67 b1 81 88 ff ff  .........,g.....
    00 40 c5 9b 81 88 ff ff 00 00 00 00 00 00 00 00  .@..............
  backtrace:
    [<00000000c8f01748>] napi_skb_cache_get+0xd4/0x150
    [<0000000041c7fc09>] __napi_build_skb+0x15/0x50
    [<00000000431c7079>] __napi_alloc_skb+0x26e/0x540
    [<000000003ecfa30e>] napi_get_frags+0x59/0x140
    [<0000000099b2199e>] tun_get_user+0x183d/0x3bb0 [tun]
    [<000000008a5adef0>] tun_chr_write_iter+0xc0/0x1b1 [tun]
    [<0000000049993ff4>] do_iter_readv_writev+0x19f/0x320
    [<000000008f338ea2>] do_iter_write+0x135/0x630
    [<000000008a3377a4>] vfs_writev+0x12e/0x440
    [<00000000a6b5639a>] do_writev+0x104/0x280
    [<00000000ccf065d8>] do_syscall_64+0x3b/0x90
    [<00000000d776e329>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

The issue occurs in the following scenarios:
tun_get_user()
  napi_gro_frags()
    napi_frags_finish()
      case GRO_NORMAL:
        gro_normal_one()
          list_add_tail(&skb->list, &napi->rx_list);
          <-- While napi->rx_count < READ_ONCE(gro_normal_batch),
          <-- gro_normal_list() is not called, napi->rx_list is not empty
  <-- not ask to complete the gro work, will cause memory leaks in
  <-- following tun_napi_del()
...
tun_napi_del()
  netif_napi_del()
    __netif_napi_del()
    <-- &napi->rx_list is not empty, which caused memory leaks

To fix, add napi_complete() after napi_gro_frags().

Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: default avatarWang Yufen <wangyufen@huawei.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1118b204
    • Ratheesh Kannoth's avatar
      octeontx2-pf: NIX TX overwrites SQ_CTX_HW_S[SQ_INT] · 51afe902
      Ratheesh Kannoth authored 
      In scenarios where multiple errors have occurred
for a SQ before SW starts handling error interrupt,
SQ_CTX[OP_INT] may get overwritten leading to
NIX_LF_SQ_OP_INT returning incorrect value.
To workaround this read LMT, MNQ and SQ individual
error status registers to determine the cause of error.

Fixes: 4ff7d148 ("octeontx2-pf: Error handling support")
Signed-off-by: default avatarRatheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: default avatarSunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      51afe902
    • Roger Quadros's avatar
      net: ethernet: ti: am65-cpsw: Fix segmentation fault at module unload · 1a0c016a
      Roger Quadros authored 
      Move am65_cpsw_nuss_phylink_cleanup() call to after
am65_cpsw_nuss_cleanup_ndev() so phylink is still valid
to prevent the below Segmentation fault on module remove when
first slave link is up.

[   31.652944] Unable to handle kernel paging request at virtual address 00040008000005f4
[   31.684627] Mem abort info:
[   31.687446]   ESR = 0x0000000096000004
[   31.704614]   EC = 0x25: DABT (current EL), IL = 32 bits
[   31.720663]   SET = 0, FnV = 0
[   31.723729]   EA = 0, S1PTW = 0
[   31.740617]   FSC = 0x04: level 0 translation fault
[   31.756624] Data abort info:
[   31.759508]   ISV = 0, ISS = 0x00000004
[   31.776705]   CM = 0, WnR = 0
[   31.779695] [00040008000005f4] address between user and kernel address ranges
[   31.808644] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[   31.814928] Modules linked in: wlcore_sdio wl18xx wlcore mac80211 libarc4 cfg80211 rfkill crct10dif_ce phy_gmii_sel ti_am65_cpsw_nuss(-) sch_fq_codel ipv6
[   31.828776] CPU: 0 PID: 1026 Comm: modprobe Not tainted 6.1.0-rc2-00012-gfabfcf7dafdb-dirty #160
[   31.837547] Hardware name: Texas Instruments AM625 (DT)
[   31.842760] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   31.849709] pc : phy_stop+0x18/0xf8
[   31.853202] lr : phylink_stop+0x38/0xf8
[   31.857031] sp : ffff80000a0839f0
[   31.860335] x29: ffff80000a0839f0 x28: ffff000000de1c80 x27: 0000000000000000
[   31.867462] x26: 0000000000000000 x25: 0000000000000000 x24: ffff80000a083b98
[   31.874589] x23: 0000000000000800 x22: 0000000000000001 x21: ffff000001bfba90
[   31.881715] x20: ffff0000015ee000 x19: 0004000800000200 x18: 0000000000000000
[   31.888842] x17: ffff800076c45000 x16: ffff800008004000 x15: 000058e39660b106
[   31.895969] x14: 0000000000000144 x13: 0000000000000144 x12: 0000000000000000
[   31.903095] x11: 000000000000275f x10: 00000000000009e0 x9 : ffff80000a0837d0
[   31.910222] x8 : ffff000000de26c0 x7 : ffff00007fbd6540 x6 : ffff00007fbd64c0
[   31.917349] x5 : ffff00007fbd0b10 x4 : ffff00007fbd0b10 x3 : ffff00007fbd3920
[   31.924476] x2 : d0a07fcff8b8d500 x1 : 0000000000000000 x0 : 0004000800000200
[   31.931603] Call trace:
[   31.934042]  phy_stop+0x18/0xf8
[   31.937177]  phylink_stop+0x38/0xf8
[   31.940657]  am65_cpsw_nuss_ndo_slave_stop+0x28/0x1e0 [ti_am65_cpsw_nuss]
[   31.947452]  __dev_close_many+0xa4/0x140
[   31.951371]  dev_close_many+0x84/0x128
[   31.955115]  unregister_netdevice_many+0x130/0x6d0
[   31.959897]  unregister_netdevice_queue+0x94/0xd8
[   31.964591]  unregister_netdev+0x24/0x38
[   31.968504]  am65_cpsw_nuss_cleanup_ndev.isra.0+0x48/0x70 [ti_am65_cpsw_nuss]
[   31.975637]  am65_cpsw_nuss_remove+0x58/0xf8 [ti_am65_cpsw_nuss]

Cc: <Stable@vger.kernel.org> # v5.18+
Fixes: e8609e69 ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK")
Signed-off-by: default avatarRoger Quadros <rogerq@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1a0c016a
    • David S. Miller's avatar
      Merge branch 'macsec-offload-fixes' · f4e405f5
      David S. Miller authored 
      Sabrina Dubroca says:

====================
macsec: offload-related fixes

I'm working on a dummy offload for macsec on netdevsim. It just has a
small SecY and RXSC table so I can trigger failures easily on the
ndo_* side. It has exposed a couple of issues.

The first patch is a revert of commit c850240b ("net: macsec:
report real_dev features when HW offloading is enabled"). That commit
tried to improve the performance of macsec offload by taking advantage
of some of the NIC's features, but in doing so, broke macsec offload
when the lower device supports both macsec and ipsec offload, as the
ipsec offload feature flags were copied from the real device. Since
the macsec device doesn't provide xdo_* ops, the XFRM core rejects the
registration of the new macsec device in xfrm_api_check.

I'm working on re-adding those feature flags when offload is
available, but I haven't fully solved that yet. I think it would be
safer to do that second part in net-next considering how complex
feature interactions tend to be.

v2:
 - better describe the issue introduced by commit c850240b (Leon
   Romanovsky)
 - patch #3: drop unnecessary !! (Leon Romanovsky)

v3:
 - patch #3: drop extra newline (Jakub Kicinski)
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f4e405f5
    • Sabrina Dubroca's avatar
      macsec: clear encryption keys from the stack after setting up offload · aaab73f8
      Sabrina Dubroca authored 
      macsec_add_rxsa and macsec_add_txsa copy the key to an on-stack
offloading context to pass it to the drivers, but leaves it there when
it's done. Clear it with memzero_explicit as soon as it's not needed
anymore.

Fixes: 3cf3227a ("net: macsec: hardware offloading infrastructure")
Signed-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
Reviewed-by: default avatarAntoine Tenart <atenart@kernel.org>
Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      aaab73f8
    • Sabrina Dubroca's avatar
      macsec: fix detection of RXSCs when toggling offloading · 80df4706
      Sabrina Dubroca authored 
      macsec_is_configured incorrectly uses secy->n_rx_sc to check if some
RXSCs exist. secy->n_rx_sc only counts the number of active RXSCs, but
there can also be inactive SCs as well, which may be stored in the
driver (in case we're disabling offloading), or would have to be
pushed to the device (in case we're trying to enable offloading).

As long as RXSCs active on creation and never turned off, the issue is
not visible.

Fixes: dcb780fb ("net: macsec: add nla support for changing the offloading selection")
Signed-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
Reviewed-by: default avatarAntoine Tenart <atenart@kernel.org>
Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      80df4706
    • Sabrina Dubroca's avatar
      macsec: fix secy->n_rx_sc accounting · 73a4b31c
      Sabrina Dubroca authored 
      secy->n_rx_sc is supposed to be the number of _active_ rxsc's within a
secy. This is then used by macsec_send_sci to help decide if we should
add the SCI to the header or not.

This logic is currently broken when we create a new RXSC and turn it
off at creation, as create_rx_sc always sets ->active to true (and
immediately uses that to increment n_rx_sc), and only later
macsec_add_rxsc sets rx_sc->active.

Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
Reviewed-by: default avatarAntoine Tenart <atenart@kernel.org>
Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      73a4b31c
    • Sabrina Dubroca's avatar
      macsec: delete new rxsc when offload fails · 93a30947
      Sabrina Dubroca authored 
      Currently we get an inconsistent state:
 - netlink returns the error to userspace
 - the RXSC is installed but not offloaded

Then the device could get confused when we try to add an RXSA, because
the RXSC isn't supposed to exist.

Fixes: 3cf3227a ("net: macsec: hardware offloading infrastructure")
Signed-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
Reviewed-by: default avatarAntoine Tenart <atenart@kernel.org>
Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      93a30947
    • Sabrina Dubroca's avatar
      Revert "net: macsec: report real_dev features when HW offloading is enabled" · 8bcd560a
      Sabrina Dubroca authored 
      This reverts commit c850240b.

That commit tried to improve the performance of macsec offload by
taking advantage of some of the NIC's features, but in doing so, broke
macsec offload when the lower device supports both macsec and ipsec
offload, as the ipsec offload feature flags (mainly NETIF_F_HW_ESP)
were copied from the real device. Since the macsec device doesn't
provide xdo_* ops, the XFRM core rejects the registration of the new
macsec device in xfrm_api_check.

Example perf trace when running
  ip link add link eni1np1 type macsec port 4 offload mac

    ip   737 [003]   795.477676: probe:xfrm_dev_event__REGISTER      name="macsec0" features=0x1c000080014869
              xfrm_dev_event+0x3a
              notifier_call_chain+0x47
              register_netdevice+0x846
              macsec_newlink+0x25a

    ip   737 [003]   795.477687:   probe:xfrm_dev_event__return      ret=0x8002 (NOTIFY_BAD)
             notifier_call_chain+0x47
             register_netdevice+0x846
             macsec_newlink+0x25a

dev->features includes NETIF_F_HW_ESP (0x04000000000000), so
xfrm_api_check returns NOTIFY_BAD because we don't have
dev->xfrmdev_ops on the macsec device.

We could probably propagate GSO and a few other features from the
lower device, similar to macvlan. This will be done in a future patch.
Signed-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
Reviewed-by: default avatarAntoine Tenart <atenart@kernel.org>
Reviewed-by: default avatarLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8bcd560a
    • Adrien Thierry's avatar
      selftests/net: give more time to udpgro bg processes to complete startup · cdb525ca
      Adrien Thierry authored 
      In some conditions, background processes in udpgro don't have enough
time to set up the sockets. When foreground processes start, this
results in the test failing with "./udpgso_bench_tx: sendmsg: Connection
refused". For instance, this happens from time to time on a Qualcomm
SA8540P SoC running CentOS Stream 9.

To fix this, increase the time given to background processes to
complete the startup before foreground processes start.
Signed-off-by: default avatarAdrien Thierry <athierry@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cdb525ca
    • Guangbin Huang's avatar
      net: hns3: fix get wrong value of function hclge_get_dscp_prio() · cfdcb075
      Guangbin Huang authored 
      As the argument struct hnae3_handle *h of function hclge_get_dscp_prio()
can be other client registered in hnae3 layer, we need to transform it
into hnae3_handle of local nic client to get right dscp settings for
other clients.

Fixes: dfea275e ("net: hns3: optimize converting dscp to priority process of hns3_nic_select_queue()")
Signed-off-by: default avatarGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cfdcb075
    • Randy Dunlap's avatar
      net: octeontx2-pf: mcs: consider MACSEC setting · 4581dd48
      Randy Dunlap authored 
      Fix build errors when MACSEC=m and OCTEONTX2_PF=y by having
OCTEONTX2_PF depend on MACSEC if it is enabled. By adding
"|| !MACSEC", this means that MACSEC is not required -- it can
be disabled for this driver.

drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_remove':
../drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:(.text+0x2fd0): undefined reference to `cn10k_mcs_free'
mips64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_mbox_up_handler_mcs_intr_notify':
../drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:(.text+0x4610): undefined reference to `cn10k_handle_mcs_event'
Reported-by: default avatarkernel test robot <lkp@intel.com>
Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Cc: Subbaraya Sundeep <sbhatta@marvell.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: Geetha sowjanya <gakula@marvell.com>
Cc: hariprasad <hkelam@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4581dd48
    • Jakub Kicinski's avatar
      Merge tag 'wireless-2022-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless · 91018bbc
      Jakub Kicinski authored 
      Kalle Valo says:

====================
wireless fixes for v6.1

Second set of fixes for v6.1. Some fixes to char type usage in
drivers, memory leaks in the stack and also functionality fixes. The
rt2x00 char type fix is a larger (but still simple) commit, otherwise
the fixes are small in size.

* tag 'wireless-2022-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()
  wifi: ath11k: Fix QCN9074 firmware boot on x86
  wifi: mac80211: Set TWT Information Frame Disabled bit as 1
  wifi: mac80211: Fix ack frame idr leak when mesh has no route
  wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit()
  wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker()
  wifi: airo: do not assign -1 to unsigned char
  wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support
  wifi: cfg80211: Fix bitrates overflow issue
  wifi: cfg80211: fix memory leak in query_regdb_file()
  wifi: mac80211: fix memory free error when registering wiphy fail
  wifi: cfg80211: silence a sparse RCU warning
  wifi: rt2x00: use explicitly signed or unsigned types
====================

Link: https://lore.kernel.org/r/20221103125315.04E57C433C1@smtp.kernel.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      91018bbc
    • Jiri Benc's avatar
      net: gso: fix panic on frag_list with mixed head alloc types · 9e4b7a99
      Jiri Benc authored 
      Since commit 3dcbdb13 ("net: gso: Fix skb_segment splat when
splitting gso_size mangled skb having linear-headed frag_list"), it is
allowed to change gso_size of a GRO packet. However, that commit assumes
that "checking the first list_skb member suffices; i.e if either of the
list_skb members have non head_frag head, then the first one has too".

It turns out this assumption does not hold. We've seen BUG_ON being hit
in skb_segment when skbs on the frag_list had differing head_frag with
the vmxnet3 driver. This happens because __netdev_alloc_skb and
__napi_alloc_skb can return a skb that is page backed or kmalloced
depending on the requested size. As the result, the last small skb in
the GRO packet can be kmalloced.

There are three different locations where this can be fixed:

(1) We could check head_frag in GRO and not allow GROing skbs with
    different head_frag. However, that would lead to performance
    regression on normal forward paths with unmodified gso_size, where
    !head_frag in the last packet is not a problem.

(2) Set a flag in bpf_skb_net_grow and bpf_skb_net_shrink indicating
    that NETIF_F_SG is undesirable. That would need to eat a bit in
    sk_buff. Furthermore, that flag can be unset when all skbs on the
    frag_list are page backed. To retain good performance,
    bpf_skb_net_grow/shrink would have to walk the frag_list.

(3) Walk the frag_list in skb_segment when determining whether
    NETIF_F_SG should be cleared. This of course slows things down.

This patch implements (3). To limit the performance impact in
skb_segment, the list is walked only for skbs with SKB_GSO_DODGY set
that have gso_size changed. Normal paths thus will not hit it.

We could check only the last skb but since we need to walk the whole
list anyway, let's stay on the safe side.

Fixes: 3dcbdb13 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list")
Signed-off-by: default avatarJiri Benc <jbenc@redhat.com>
Reviewed-by: default avatarWillem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/e04426a6a91baf4d1081e1b478c82b5de25fdf21.1667407944.git.jbenc@redhat.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      9e4b7a99
    • Jakub Kicinski's avatar
      Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · f2c24be5
      Jakub Kicinski authored 
      Daniel Borkmann says:

====================
bpf 2022-11-04

We've added 8 non-merge commits during the last 3 day(s) which contain
a total of 10 files changed, 113 insertions(+), 16 deletions(-).

The main changes are:

1) Fix memory leak upon allocation failure in BPF verifier's stack state
   tracking, from Kees Cook.

2) Fix address leakage when BPF progs release reference to an object,
   from Youlin Li.

3) Fix BPF CI breakage from buggy in.h uapi header dependency,
   from Andrii Nakryiko.

4) Fix bpftool pin sub-command's argument parsing, from Pu Lehui.

5) Fix BPF sockmap lockdep warning by cancelling psock work outside
   of socket lock, from Cong Wang.

6) Follow-up for BPF sockmap to fix sk_forward_alloc accounting,
   from Wang Yufen.

bpf-for-netdev

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Add verifier test for release_reference()
  bpf: Fix wrong reg type conversion in release_reference()
  bpf, sock_map: Move cancel_work_sync() out of sock lock
  tools/headers: Pull in stddef.h to uapi to fix BPF selftests build in CI
  net/ipv4: Fix linux/in.h header dependencies
  bpftool: Fix NULL pointer dereference when pin {PROG, MAP, LINK} without FILE
  bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues
  bpf, verifier: Fix memory leak in array reallocation for stack state
====================

Link: https://lore.kernel.org/r/20221104000445.30761-1-daniel@iogearbox.netSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      f2c24be5
  9. 03 Nov, 2022 3 commits
    • Youlin Li's avatar
      selftests/bpf: Add verifier test for release_reference() · 475244f5
      Youlin Li authored 
      Add a test case to ensure that released pointer registers will not be
leaked into the map.

Before fix:

  ./test_verifier 984
    984/u reference tracking: try to leak released ptr reg FAIL
    Unexpected success to load!
    verification time 67 usec
    stack depth 4
    processed 23 insns (limit 1000000) max_states_per_insn 0 total_states 2
    peak_states 2 mark_read 1
    984/p reference tracking: try to leak released ptr reg OK
    Summary: 1 PASSED, 0 SKIPPED, 1 FAILED

After fix:

  ./test_verifier 984
    984/u reference tracking: try to leak released ptr reg OK
    984/p reference tracking: try to leak released ptr reg OK
    Summary: 2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: default avatarYoulin Li <liulin063@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221103093440.3161-2-liulin063@gmail.com
      475244f5
    • Youlin Li's avatar
      bpf: Fix wrong reg type conversion in release_reference() · f1db2081
      Youlin Li authored 
      Some helper functions will allocate memory. To avoid memory leaks, the
verifier requires the eBPF program to release these memories by calling
the corresponding helper functions.

When a resource is released, all pointer registers corresponding to the
resource should be invalidated. The verifier use release_references() to
do this job, by apply  __mark_reg_unknown() to each relevant register.

It will give these registers the type of SCALAR_VALUE. A register that
will contain a pointer value at runtime, but of type SCALAR_VALUE, which
may allow the unprivileged user to get a kernel pointer by storing this
register into a map.

Using __mark_reg_not_init() while NOT allow_ptr_leaks can mitigate this
problem.

Fixes: fd978bf7 ("bpf: Add reference tracking to verifier")
Signed-off-by: default avatarYoulin Li <liulin063@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221103093440.3161-1-liulin063@gmail.com
      f1db2081
    • Linus Torvalds's avatar
      Merge tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 9521c9d6
      Linus Torvalds authored 
      Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth and netfilter.

  Current release - regressions:

   - net: several zerocopy flags fixes

   - netfilter: fix possible memory leak in nf_nat_init()

   - openvswitch: add missing .resv_start_op

  Previous releases - regressions:

   - neigh: fix null-ptr-deref in neigh_table_clear()

   - sched: fix use after free in red_enqueue()

   - dsa: fall back to default tagger if we can't load the one from DT

   - bluetooth: fix use-after-free in l2cap_conn_del()

  Previous releases - always broken:

   - netfilter: netlink notifier might race to release objects

   - nfc: fix potential memory leak of skb

   - bluetooth: fix use-after-free caused by l2cap_reassemble_sdu

   - bluetooth: use skb_put to set length

   - eth: tun: fix bugs for oversize packet when napi frags enabled

   - eth: lan966x: fixes for when MTU is changed

   - eth: dwmac-loongson: fix invalid mdio_node"

* tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
  vsock: fix possible infinite sleep in vsock_connectible_wait_data()
  vsock: remove the unused 'wait' in vsock_connectible_recvmsg()
  ipv6: fix WARNING in ip6_route_net_exit_late()
  bridge: Fix flushing of dynamic FDB entries
  net, neigh: Fix null-ptr-deref in neigh_table_clear()
  net/smc: Fix possible leaked pernet namespace in smc_init()
  stmmac: dwmac-loongson: fix invalid mdio_node
  ibmvnic: Free rwi on reset success
  net: mdio: fix undefined behavior in bit shift for __mdiobus_register
  Bluetooth: L2CAP: Fix attempting to access uninitialized memory
  Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
  Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
  Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
  Bluetooth: L2CAP: Fix memory leak in vhci_write
  Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
  Bluetooth: virtio_bt: Use skb_put to set length
  Bluetooth: hci_conn: Fix CIS connection dst_type handling
  Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
  netfilter: ipset: enforce documented limit to prevent allocating huge memory
  isdn: mISDN: netjet: fix wrong check of device registration
  ...
      9521c9d6
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7