- 21 Jun, 2019 40 commits
-
-
Akinobu Mita authored
The tpf_min (1/100) and tpf_max (100/1) are used as the lowest and the highest allowable value for the desired frame period in vivid_vid_cap_s_parm(). But the comparison between these values is unnecessary because the compared value is already chosen from webcam_intervals[] (from 1/60 to 1/1). Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Alexandre Courbot authored
We were getting the codec interface through a proxy function that does not bring anything compared to just accessing the interface definition directly, so just do that. Also make the decoder interfaces const. Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Signed-off-by:
-
Alexandre Courbot authored
The interface used to communicate with the firmware casts pointers into unsigned longs and back again in order to store private references, all of this for pointers that remain purely in the kernel. Replace these unsigned longs with void pointers to make the code a bit sturdier and easier to follow. Also simplify some interfaces by removing arguments that could be infered from others. Signed-off-by:
-
André Almeida authored
Remove redundant Makefile rules (vimc_capture-objs, ...). Stop exposing vimc-{common, streamer} as modules, since there's no use case where they would be individually added/removed from Vimc. As consequence, remove MODULE_ macros from vimc-{common, streamer}. `-objs` is fitted for building host programs, change to `-y`, more straightforward for device drivers. Signed-off-by:André Almeida <andrealmeid@collabora.com> Suggested-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
André Almeida authored
Fix typo on "tranforming". Add a line break so it keeps under 80 columns. Fix typo on "[it] need". Signed-off-by:
-
Luca Ceresoli authored
This paragraph was added by commit a42b57f5 ("V4L/DVB: Documentation: add v4l2-controls.txt documenting the new controls API") back in 2010, when the controls API has been improved. Nowadays it is a bit anachronistic, so remove it. The same information is stated in up-to-date wording a few paragraphs later > You’re done! And this is sufficient for most of the drivers we have. No > need to do any validation of control values, or implement QUERYCTRL, > QUERY_EXT_CTRL and QUERYMENU. And G/S_CTRL as well as G/TRY/S_EXT_CTRLS > are automatically supported. Signed-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Luca Ceresoli authored
The tutorial in this section is almost complete, add the one missing bit. Signed-off-by:
-
Luca Ceresoli authored
All these code blocks contain C code, enable C formatting for a nicer reading. Signed-off-by:
-
Luca Ceresoli authored
This section lacks links to functions. Add one to simplify reading. Signed-off-by:
-
Luca Ceresoli authored
The code snippet showing how to add controls to the driver’s top-level struct is present twice, but only the second time it is split in the V4L2 and subdev cases. Consolidate everything at the beginning. Also remove the "Where foo->bar is of type struct baz" sentences, this obvious from the code. Signed-off-by:
-
Luca Ceresoli authored
This section lacks links to struct definitions. Add one where each struct is introduced. Signed-off-by:
-
Luca Ceresoli authored
Fix indentation in example C code. Signed-off-by:
-
Luca Ceresoli authored
Mentioning :ref:`VIDIOC_QUERYCTRL` renders all the three related ioctls. Explicitly adding VIDIOC_QUERY_EXT_CTRL and VIDIOC_QUERYMENU will make them render twice, so remove them Signed-off-by:
-
Marek Szyprowski authored
Since the beginning the second clock ('special', 'sclk') was optional and it is not available on some variants of Exynos SoCs (i.e. Exynos5420 with v7 of MFC hardware). However commit 1bce6fb3 ("[media] s5p-mfc: Rework clock handling") made handling of all specified clocks mandatory. This patch restores original behavior of the driver and fixes its operation on Exynos5420 SoCs. Fixes: 1bce6fb3 ("[media] s5p-mfc: Rework clock handling") Signed-off-by:Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Maxime Jourdan authored
Both MESON AO CEC and MESON VIDEO DECODER point to the wrong linux-media mailing list. Update it to linux-media@vger.kernel.org. Signed-off-by:
Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by:
-
Shuah Khan authored
Fix v4l2_fourcc define to use "U" cast to avoid shifting signed 32-bit value by 31 bits problem. This isn't a problem for kernel builds with gcc. This could be problem since this header is part of public API which could be included for builds using compilers that don't handle this condition safely resulting in undefined behavior. Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Shuah Khan authored
Fix MEDIA_ENT_ID_FLAG_NEXT to use "U" cast to avoid shifting signed 32-bit value by 31 bits problem. This isn't a problem for kernel builds with gcc. This could be problem since this header is part of public API which could be included for builds using compilers that don't handle this condition safely resulting in undefined behavior. Signed-off-by:
-
Niklas Söderlund authored
After the rework of the Gen2 file operations it's now trivial to merge the Gen2 and Gen3 versions. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by:
-
Niklas Söderlund authored
The function no longer serve a purpose as most tasks it performed have been refactored, fold what remains of it into the only caller. While at it add error checking for v4l2_ctrl_handler_setup(). Signed-off-by:
-
Niklas Söderlund authored
The two power helpers are now only dealing with the parallel subdevice, merge them into a single rvin_power_parallel() helper to reduce code duplication. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Niklas Söderlund authored
The helpers rvin_power_{on,off} deal with both VIN and the parallel subdevice power. This makes it hard to merge the Gen2 and Gen3 open/release functions. Move the VIN power handling directly to the open/release functions to prepare for the merge. Signed-off-by: -
Niklas Söderlund authored
The format is already synced when the subdevice is bound, there is no need to do do it every time the video device is opened. Signed-off-by:
-
Niklas Söderlund authored
The user should be allowed to break waiting for the lock when opening the video device. Signed-off-by:
-
Niklas Söderlund authored
Runtime PM is already enabled unconditionally when the driver is probed and disabled when it's removed. There is no point in doing it again for Gen2 when opening and closing the video device. Signed-off-by:
-
Niklas Söderlund authored
The driver does not implement runtime resume and suspend function so there is little point in trying to call them. This is a leftover from the drivers soc_camera beginnings. Signed-off-by:
-
Anders Roxell authored
When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511 enabled as loadable modules, we see the following warning: drivers/gpu/drm/bridge/adv7511/adv7511.ko drivers/media/i2c/adv7511.ko Rework so that the file is named adv7511-v4l2.c. Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
Colin Ian King authored
The pointer mpeg12 is being initialized however that value is never read and mpeg12 is being re-assigned almost immediately afterwards. Remove the redundant initialization. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
Eugen Hristev authored
Fixed issues that can lead to potential bugs. Cleanup order in the driver Taking into consideration std control creation can fail mutex_destroy call changing controller_formats with const specifier some cosmetic cleanups Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Eugen Hristev authored
This splits the Atmel ISC driver into a common base: atmel-isc-base.c and the driver probe/dt part , atmel-sama5d2-isc.c This is needed to keep a common ground for the sensor controller which will be reused. The atmel-isc will use the common symbols inside the atmel-isc-base Future driver will also use the same symbols and redefine different aspects, for a different version of the ISC. This is done to avoid complete code duplication by creating a totally different driver for the new variant of the ISC. Signed-off-by:
-
Rui Miguel Silva authored
When the upstream endpoint is neither a mux nor a CSI2 module, just get the source pad directly upstream from the CSI. Reported-by:
Sebastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by:
Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by:
-
Tomasz Figa authored
When the application calls VIDIOC_DQBUF with the DMABUF memory type, the v4l2_buffer structure (or v4l2_plane structures) are filled with DMA-buf file descriptors. However, the current documentation does not explain whether those are new file descriptors referring to the same DMA-bufs or just the same integers as passed to VIDIOC_QBUF back in time. Clarify the documentation that it's the latter. Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Ezequiel Garcia authored
Use the newly introduced vb2_get_buffer API and avoid accessing buffers in the queue directly. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Ezequiel Garcia authored
Use the newly introduced vb2_get_buffer API and avoid accessing buffers in the queue directly. Signed-off-by:
-
Ezequiel Garcia authored
Use the newly introduced vb2_get_buffer API and avoid accessing buffers in the queue directly. Signed-off-by:
-
Ezequiel Garcia authored
Some drivers need to access a vb2 buffer from its queue index. Introduce an accessor to abstract this, and avoid drivers from accessing private members. Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
-
Colin Ian King authored
There are three error return paths that don't kfree params causing a memory leak. Fix this by adding an error return path that kfree's params before returning. Also add a check to see params failed to be allocated. Signed-off-by:
-
Dan Carpenter authored
Thus the address of "&ctx->dev->variant->codec_ops[codec_mode]" can't possibly be NULL. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Ezequiel Garcia authored
These two control types don't really need a default value, as they are not expected to carry any value. However, it's slightly clearer to initialize them explicitly instead of falling back to the switch default. Signed-off-by:
-
Mauro Carvalho Chehab authored
Linux 5.2-rc5 There are some media fixes on -rc5, so merge from it at media devel tree. * tag 'v5.2-rc5': (210 commits) Linux 5.2-rc5 x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback Smack: Restore the smackfsdef mount option and add missing prefixes ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper() module: Fix livepatch/ftrace module text permissions race tracing/uprobe: Fix obsolete comment on trace_uprobe_create() tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create() tracing: Make two symbols static tracing: avoid build warning with HAVE_NOP_MCOUNT tracing: Fix out-of-range read in trace_stack_print() gfs2: Fix rounding error in gfs2_iomap_page_prepare x86/kasan: Fix boot with 5-level paging and KASAN timekeeping: Repair ktime_get_coarse*() granularity Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops" mm/devm_memremap_pages: fix final page put race PCI/P2PDMA: track pgmap references per resource, not globally lib/genalloc: introduce chunk owners PCI/P2PDMA: fix the gen_pool_add_virt() failure path mm/devm_memremap_pages: introduce devm_memunmap_pages drivers/base/devres: introduce devm_release_action() ...
-
Sean Young authored
The IR signal to control the Panasonic ACXA75C00600 air conditioner has 439 pulse/spaces. Increase limit to make it possible to transmit signal. Reported-by:
Takashi Kanamaru <neuralassembly@gmail.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
