- 13 Dec, 2018 40 commits
-
-
Sandeep Singh authored
commit a7d57abc upstream. Occasionally AMD SNPS 3.0 xHC does not respond to CSS when set, also it does not flag anything on SRE and HCE to point the internal xHC errors on USBSTS register. This stalls the entire system wide suspend and there is no point in stalling just because of xHC CSS is not responding. To work around this problem, if the xHC does not flag anything on SRE and HCE, we can skip the CSS timeout and allow the system to continue the suspend. Once the system resume happens we can internally reset the controller using XHCI_RESET_ON_RESUME quirk Signed-off-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by:
Sandeep Singh <Sandeep.Singh@amd.com> cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> Cc: <stable@vger.kernel.org> Tested-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kees Cook authored
commit e46daee5 upstream. The arm compiler internally interprets an inline assembly label as an unsigned long value, not a pointer. As a result, under CONFIG_FORTIFY_SOURCE, the address of a label has a size of 4 bytes, which was tripping the runtime checks. Instead, we can just cast the label (as done with the size calculations earlier). Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1639397Reported-by:
William Cohen <wcohen@redhat.com> Fixes: 6974f0c4 ("include/linux/string.h: add the option of fortified string.h functions") Cc: stable@vger.kernel.org Acked-by:
Laura Abbott <labbott@redhat.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Tested-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Bin Liu authored
commit 59861547 upstream. The driver defines three states for a cppi channel. - idle: .chan_busy == 0 && not in .pending list - pending: .chan_busy == 0 && in .pending list - busy: .chan_busy == 1 && not in .pending list There are cases in which the cppi channel could be in the pending state when cppi41_dma_issue_pending() is called after cppi41_runtime_suspend() is called. cppi41_stop_chan() has a bug for these cases to set channels to idle state. It only checks the .chan_busy flag, but not the .pending list, then later when cppi41_runtime_resume() is called the channels in .pending list will be transitioned to busy state. Removing channels from the .pending list solves the problem. Fixes: 975faaeb ("dma: cppi41: start tear down only if channel is busy") Cc: stable@vger.kernel.org # v3.15+ Signed-off-by:
Bin Liu <b-liu@ti.com> Reviewed-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Andy Shevchenko authored
commit ffe843b1 upstream. Intel Merrifield has a reduced size of FIFO used in iDMA 32-bit controller, i.e. 512 bytes instead of 1024. Fix this by partitioning it as 64 bytes per channel. Note, in the future we might switch to 'fifo-size' property instead of hard coded value. Fixes: 199244d6 ("dmaengine: dw: add support of iDMA 32-bit hardware") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Chuck Lever authored
commit 8dae5398 upstream. call_encode can be invoked more than once per RPC call. Ensure that each call to gss_wrap_req_priv does not overwrite pointers to previously allocated memory. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: stable@kernel.org Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Stefan Hajnoczi authored
commit 834e772c upstream. If the network stack calls .send_pkt()/.cancel_pkt() during .release(), a struct vhost_vsock use-after-free is possible. This occurs because .release() does not wait for other CPUs to stop using struct vhost_vsock. Switch to an RCU-enabled hashtable (indexed by guest CID) so that .release() can wait for other CPUs by calling synchronize_rcu(). This also eliminates vhost_vsock_lock acquisition in the data path so it could have a positive effect on performance. This is CVE-2018-14625 "kernel: use-after-free Read in vhost_transport_send_pkt". Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+bd391451452fb0b93039@syzkaller.appspotmail.com Reported-by: syzbot+e3e074963495f92a89ed@syzkaller.appspotmail.com Reported-by: syzbot+d5a0a170c5069658b141@syzkaller.appspotmail.com Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Halil Pasic authored
commit 78b1a52e upstream. While ccw_io_helper() seems like intended to be exclusive in a sense that it is supposed to facilitate I/O for at most one thread at any given time, there is actually nothing ensuring that threads won't pile up at vcdev->wait_q. If they do, all threads get woken up and see the status that belongs to some other request than their own. This can lead to bugs. For an example see: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1788432 This race normally does not cause any problems. The operations provided by struct virtio_config_ops are usually invoked in a well defined sequence, normally don't fail, and are normally used quite infrequent too. Yet, if some of the these operations are directly triggered via sysfs attributes, like in the case described by the referenced bug, userspace is given an opportunity to force races by increasing the frequency of the given operations. Let us fix the problem by ensuring, that for each device, we finish processing the previous request before starting with a new one. Signed-off-by:
Halil Pasic <pasic@linux.ibm.com> Reported-by:
Colin Ian King <colin.king@canonical.com> Cc: stable@vger.kernel.org Message-Id: <20180925121309.58524-3-pasic@linux.ibm.com> Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Halil Pasic authored
commit 2448a299 upstream. Currently we have a race on vcdev->config in virtio_ccw_get_config() and in virtio_ccw_set_config(). This normally does not cause problems, as these are usually infrequent operations. However, for some devices writing to/reading from the config space can be triggered through sysfs attributes. For these, userspace can force the race by increasing the frequency. Signed-off-by:
-
Takashi Iwai authored
commit 54947cd6 upstream. We've got a regression report for some Thinkpad models (at least T570s) which shows the too low speaker output volume. The bisection leaded to the commit 61fcf8ec ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform"), and it's basically adding the two pin configurations for the dock, and looks harmless. The real culprit seems, though, that the DAC assignment for the speaker pin is implicitly assumed on these devices, i.e. pin NID 0x14 to be coupled with DAC NID 0x03. When more pins are configured by the commit above, the auto-parser changes the DAC assignment, and this resulted in the regression. As a workaround, just provide the fixed pin / DAC mapping table for this Thinkpad fixup function. It's no generic solution, but the problem itself is pretty much device-specific, so must be good enough. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1554304 Fixes: 61fcf8ec ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform") Cc: <stable@vger.kernel.org> Reported-and-tested-by:
Jeremy Cline <jcline@redhat.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 5363857b upstream. As addressed in alsa-lib (commit b420056604f0), we need to fix the case where the evaluation of PCM interval "(x x+1]" leading to -EINVAL. After applying rules, such an interval may be translated as "(x x+1)". Fixes: ff2d6acd ("ALSA: pcm: Fix snd_interval_refine first/last with open min/max") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit b51abed8 upstream. Currently the PCM core calls snd_pcm_unlink() always unconditionally at closing a stream. However, since snd_pcm_unlink() invokes the global rwsem down, the lock can be easily contended. More badly, when a thread runs in a high priority RT-FIFO, it may stall at spinning. Basically the call of snd_pcm_unlink() is required only for the linked streams that are already rare occasion. For normal use cases, this code path is fairly superfluous. As an optimization (and also as a workaround for the RT problem above in normal situations without linked streams), this patch adds a check before calling snd_pcm_unlink() and calls it only when needed. Reported-by:
Chanho Min <chanho.min@lge.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Chanho Min authored
commit b888a5f7 upstream. Commit 67ec1072 ("ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream") fixes deadlock for non-atomic PCM stream. But, This patch causes antother stuck. If writer is RT thread and reader is a normal thread, the reader thread will be difficult to get scheduled. It may not give chance to release readlocks and writer gets stuck for a long time if they are pinned to single cpu. The deadlock described in the previous commit is because the linux rwsem queues like a FIFO. So, we might need non-FIFO writelock, not non-block one. My suggestion is that the writer gives reader a chance to be scheduled by using the minimum msleep() instaed of spinning without blocking by writer. Also, The *_nonblock may be changed to *_nonfifo appropriately to this concept. In terms of performance, when trylock is failed, this minimum periodic msleep will have the same performance as the tick-based schedule()/wake_up_q(). [ Although this has a fairly high performance penalty, the relevant code path became already rare due to the previous commit ("ALSA: pcm: Call snd_pcm_unlink() conditionally at closing"). That is, now this unconditional msleep appears only when using linked streams, and this must be a rare case. So we accept this as a quick workaround until finding a more suitable one -- tiwai ] Fixes: 67ec1072 ("ALSA: pcm: Fix rwsem deadlock for non-atomic PCM stream") Suggested-by:
Wonmin Jung <wonmin.jung@lge.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 3deef52c upstream. It's similar to other AMD audio devices, it also supports D3, which can save some power drain. Signed-off-by:
-
Hui Peng authored
commit 5f8cf712 upstream. If a USB sound card reports 0 interfaces, an error condition is triggered and the function usb_audio_probe errors out. In the error path, there was a use-after-free vulnerability where the memory object of the card was first freed, followed by a decrement of the number of active chips. Moving the decrement above the atomic_dec fixes the UAF. [ The original problem was introduced in 3.1 kernel, while it was developed in a different form. The Fixes tag below indicates the original commit but it doesn't mean that the patch is applicable cleanly. -- tiwai ] Fixes: 362e4e49 ("ALSA: usb-audio - clear chip->probing on error exit") Reported-by:
Hui Peng <benquike@gmail.com> Reported-by:
Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by:
-
Mathias Payer authored
commit 704620af upstream. When reading an extra descriptor, we need to properly check the minimum and maximum size allowed, to prevent from invalid data being sent by a device. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alexander Theissen authored
commit d7859905 upstream. Add another Apple Cinema Display to the list of supported displays. Signed-off-by:
Alexander Theissen <alex.theissen@me.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Harry Pan authored
commit 2f2dde6b upstream. Some lower volume SanDisk Ultra Flair in 16GB, which the VID:PID is in 0781:5591, will aggressively request LPM of U1/U2 during runtime, when using this thumb drive as the OS installation key we found the device will generate failure during U1 exit path making it dropped from the USB bus, this causes a corrupted installation in system at the end. i.e., [ 166.918296] hub 2-0:1.0: state 7 ports 7 chg 0000 evt 0004 [ 166.918327] usb usb2-port2: link state change [ 166.918337] usb usb2-port2: do warm reset [ 166.970039] usb usb2-port2: not warm reset yet, waiting 50ms [ 167.022040] usb usb2-port2: not warm reset yet, waiting 200ms [ 167.276043] usb usb2-port2: status 02c0, change 0041, 5.0 Gb/s [ 167.276050] usb 2-2: USB disconnect, device number 2 [ 167.276058] usb 2-2: unregistering device [ 167.276060] usb 2-2: unregistering interface 2-2:1.0 [ 167.276170] xhci_hcd 0000:00:15.0: shutdown urb ffffa3c7cc695cc0 ep1in-bulk [ 167.284055] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 167.284064] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 33 04 90 00 01 00 00 ... Analyzed the USB trace in the link layer we realized it is because of the 6-ms timer of tRecoveryConfigurationTimeout which documented on the USB 3.2 Revision 1.0, the section 7.5.10.4.2 of "Exit from Recovery.Configuration"; device initiates U1 exit -> Recovery.Active -> Recovery.Configuration, then the host timer timeout makes the link transits to eSS.Inactive -> Rx.Detect follows by a Warm Reset. Interestingly, the other higher volume of SanDisk Ultra Flair sharing the same VID:PID, such as 64GB, would not request LPM during runtime, it sticks at U0 always, thus disabling LPM does not affect those thumb drives at all. The same odd occures in SanDisk Ultra Fit 16GB, VID:PID in 0781:5583. Signed-off-by:
Harry Pan <harry.pan@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Tetsuo Handa authored
[ Upstream commit 400e2249 ] Commit 63f53dea ("mm: warn about allocations which stall for too long") was a great step for reducing possibility of silent hang up problem caused by memory allocation stalls. But this commit reverts it, for it is possible to trigger OOM lockup and/or soft lockups when many threads concurrently called warn_alloc() (in order to warn about memory allocation stalls) due to current implementation of printk(), and it is difficult to obtain useful information due to limitation of synchronous warning approach. Current printk() implementation flushes all pending logs using the context of a thread which called console_unlock(). printk() should be able to flush all pending logs eventually unless somebody continues appending to printk() buffer. Since warn_alloc() started appending to printk() buffer while waiting for oom_kill_process() to make forward progress when oom_kill_process() is processing pending logs, it became possible for warn_alloc() to force oom_kill_process() loop inside printk(). As a result, warn_alloc() significantly increased possibility of preventing oom_kill_process() from making forward progress. ---------- Pseudo code start ---------- Before warn_alloc() was introduced: retry: if (mutex_trylock(&oom_lock)) { while (atomic_read(&printk_pending_logs) > 0) { atomic_dec(&printk_pending_logs); print_one_log(); } // Send SIGKILL here. mutex_unlock(&oom_lock) } goto retry; After warn_alloc() was introduced: retry: if (mutex_trylock(&oom_lock)) { while (atomic_read(&printk_pending_logs) > 0) { atomic_dec(&printk_pending_logs); print_one_log(); } // Send SIGKILL here. mutex_unlock(&oom_lock) } else if (waited_for_10seconds()) { atomic_inc(&printk_pending_logs); } goto retry; ---------- Pseudo code end ---------- Although waited_for_10seconds() becomes true once per 10 seconds, unbounded number of threads can call waited_for_10seconds() at the same time. Also, since threads doing waited_for_10seconds() keep doing almost busy loop, the thread doing print_one_log() can use little CPU resource. Therefore, this situation can be simplified like ---------- Pseudo code start ---------- retry: if (mutex_trylock(&oom_lock)) { while (atomic_read(&printk_pending_logs) > 0) { atomic_dec(&printk_pending_logs); print_one_log(); } // Send SIGKILL here. mutex_unlock(&oom_lock) } else { atomic_inc(&printk_pending_logs); } goto retry; ---------- Pseudo code end ---------- when printk() is called faster than print_one_log() can process a log. One of possible mitigation would be to introduce a new lock in order to make sure that no other series of printk() (either oom_kill_process() or warn_alloc()) can append to printk() buffer when one series of printk() (either oom_kill_process() or warn_alloc()) is already in progress. Such serialization will also help obtaining kernel messages in readable form. ---------- Pseudo code start ---------- retry: if (mutex_trylock(&oom_lock)) { mutex_lock(&oom_printk_lock); while (atomic_read(&printk_pending_logs) > 0) { atomic_dec(&printk_pending_logs); print_one_log(); } // Send SIGKILL here. mutex_unlock(&oom_printk_lock); mutex_unlock(&oom_lock) } else { if (mutex_trylock(&oom_printk_lock)) { atomic_inc(&printk_pending_logs); mutex_unlock(&oom_printk_lock); } } goto retry; ---------- Pseudo code end ---------- But this commit does not go that direction, for we don't want to introduce a new lock dependency, and we unlikely be able to obtain useful information even if we serialized oom_kill_process() and warn_alloc(). Synchronous approach is prone to unexpected results (e.g. too late [1], too frequent [2], overlooked [3]). As far as I know, warn_alloc() never helped with providing information other than "something is going wrong". I want to consider asynchronous approach which can obtain information during stalls with possibly relevant threads (e.g. the owner of oom_lock and kswapd-like threads) and serve as a trigger for actions (e.g. turn on/off tracepoints, ask libvirt daemon to take a memory dump of stalling KVM guest for diagnostic purpose). This commit temporarily loses ability to report e.g. OOM lockup due to unable to invoke the OOM killer due to !__GFP_FS allocation request. But asynchronous approach will be able to detect such situation and emit warning. Thus, let's remove warn_alloc(). [1] https://bugzilla.kernel.org/show_bug.cgi?id=192981 [2] http://lkml.kernel.org/r/CAM_iQpWuPVGc2ky8M-9yukECtS+zKjiDasNymX7rMcBjBFyM_A@mail.gmail.com [3] commit db73ee0d ("mm, vmscan: do not loop on too_many_isolated for ever")) Link: http://lkml.kernel.org/r/1509017339-4802-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
Cong Wang <xiyou.wangcong@gmail.com> Reported-by:
yuwang.yuwang <yuwang.yuwang@alibaba-inc.com> Reported-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yangtao Li authored
[ Upstream commit c44c749d ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place doesn't do that, so fix it. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 5ed9dc99 ] team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin() will send multicast join group message to notify peers. We should do this when enabling/changed to a new port. But it doesn't make sense to do it when a port is disabled. On the other hand, when we set mcast_rejoin_count to 2, and do a failover, team_port_disable() will increase mcast_rejoin.count_pending to 2 and then team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send 4 mcast rejoin messages at latest, which will make user confused. The same with notify_peers.count. Fix it by deleting team_notify_peers() and team_mcast_rejoin() in team_port_disable(). Reported-by:
Liang Li <liali@redhat.com> Fixes: fc423ff0 ("team: add peer notification") Fixes: 492b200e ("team: add support for sending multicast rejoins") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Thomas Falcon authored
[ Upstream commit b7cdec3d ] The wrong index is used when cleaning up RX buffer objects during release of RX queues. Update to use the correct index counter. Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Tigran Mkrtchyan authored
[ Upstream commit bb21ce0a ] rfc8435 says: For tight coupling, ffds_stateid provides the stateid to be used by the client to access the file. However current implementation replaces per-mirror provided stateid with by open or lock stateid. Ensure that per-mirror stateid is used by ff_layout_write_prepare_v4 and nfs4_ff_layout_prepare_ds. Signed-off-by:
Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by:
Rick Macklem <rmacklem@uoguelph.ca> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 829383e1 ] memunmap() should be used to free the return of memremap(), not iounmap(). Fixes: dfddb969 ('iommu/vt-d: Switch from ioremap_cache to memremap') Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Vincent Chen authored
[ Upstream commit 426a593e ] In the original ftmac100_interrupt(), the interrupts are only disabled when the condition "netif_running(netdev)" is true. However, this condition causes kerenl hang in the following case. When the user requests to disable the network device, kernel will clear the bit __LINK_STATE_START from the dev->state and then call the driver's ndo_stop function. Network device interrupts are not blocked during this process. If an interrupt occurs between clearing __LINK_STATE_START and stopping network device, kernel cannot disable the interrupts due to the condition "netif_running(netdev)" in the ISR. Hence, kernel will hang due to the continuous interruption of the network device. In order to solve the above problem, the interrupts of the network device should always be disabled in the ISR without being restricted by the condition "netif_running(netdev)". [V2] Remove unnecessary curly braces. Signed-off-by:
Vincent Chen <vincentc@andestech.com> Signed-off-by:
-
Denis Bolotin authored
[ Upstream commit eb62cca9 ] The getter callers doesn't know the valid Physical Queues (PQ) values. This patch makes sure that a valid PQ will always be returned. The patch consists of 3 fixes: - When qed_init_qm_get_idx_from_flags() receives a disabled flag, it returned PQ 0, which can potentially be another function's pq. Verify that flag is enabled, otherwise return default start_pq. - When qed_init_qm_get_idx_from_flags() receives an unknown flag, it returned NULL and could lead to a segmentation fault. Return default start_pq instead. - A modulo operation was added to MCOS/VFS PQ getters to make sure the PQ returned is in range of the required flag. Fixes: b5a9ee7c ("qed: Revise QM cofiguration") Signed-off-by:
Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by:
Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by:
-
Denis Bolotin authored
[ Upstream commit 276d43f0 ] Fix the condition which verifies that only one flag is set. The API bitmap_weight() should receive size in bits instead of bytes. Fixes: b5a9ee7c ("qed: Revise QM cofiguration") Signed-off-by:
-
Thor Thayer authored
[ Upstream commit a6a66f80 ] The current Cadence QSPI driver caused a kernel panic sporadically when writing to QSPI. The problem was caused by writing more bytes than needed because the QSPI operated on 4 bytes at a time. <snip> [ 11.202044] Unable to handle kernel paging request at virtual address bffd3000 [ 11.209254] pgd = e463054d [ 11.211948] [bffd3000] *pgd=2fffb811, *pte=00000000, *ppte=00000000 [ 11.218202] Internal error: Oops: 7 [#1] SMP ARM [ 11.222797] Modules linked in: [ 11.225844] CPU: 1 PID: 1317 Comm: systemd-hwdb Not tainted 4.17.7-d0c45cd44a8f [ 11.235796] Hardware name: Altera SOCFPGA Arria10 [ 11.240487] PC is at __raw_writesl+0x70/0xd4 [ 11.244741] LR is at cqspi_write+0x1a0/0x2cc </snip> On a page boundary limit the number of bytes copied from the tx buffer to remain within the page. This patch uses a temporary buffer to hold the 4 bytes to write and then copies only the bytes required from the tx buffer. Reported-by:
Adrian Amborzewicz <adrian.ambrozewicz@intel.com> Signed-off-by:
Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 12d43aac ] Cirque Touchpad/Pointstick combo is similar to Alps devices, it requires MT_CLS_WIN_8_DUAL to expose its pointstick as a mouse. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Olof Johansson authored
[ Upstream commit 33bf5519 ] PAGE_READ is used by RISC-V arch code included through mm headers, and it makes sense to bring in a prefix on these in the driver. drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined #define PAGE_READ 0x2 In file included from include/linux/memremap.h:7, from include/linux/mm.h:27, from include/linux/scatterlist.h:8, from include/linux/dma-mapping.h:11, from drivers/mtd/nand/raw/qcom_nandc.c:17: arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition Caught by riscv allmodconfig. Signed-off-by:
Olof Johansson <olof@lixom.net> Reviewed-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
-
Bartosz Golaszewski authored
[ Upstream commit bff466ba ] Commit 3edfb7bd ("gpiolib: Show correct direction from the beginning") fixed an existing issue but broke libgpiod tests by changing the default direction of dummy lines to output. We don't break user-space so make gpio-mockup behave as before. Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Aya Levin authored
[ Upstream commit a463146e ] UBSAN: Undefined behavior in drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29 signed integer overflow: 1802201963 + 1802201963 cannot be represented in type 'int' The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors granting of reserved resources. The grant operation is calculated and protected, thus both members of the union cannot be negative. Changed type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed int to unsigned int, allowing large value. Fixes: 5a0d0a61 ("mlx4: Structures and init/teardown for VF resource quotas") Signed-off-by:
Aya Levin <ayal@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Tariq Toukan authored
[ Upstream commit 3ea7e7ea ] Initialize the uid variable to zero to avoid the compilation warning. Fixes: 7a89399f ("net/mlx4: Add mlx4_bitmap zone allocator") Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit bd85fbc2 ] When re-registering a user mr, the mpt information for the existing mr when running SRIOV is obtained via the QUERY_MPT fw command. The returned information includes the mpt's lkey. This retrieved mpt information is used to move the mpt back to hardware ownership in the rereg flow (via the SW2HW_MPT fw command when running SRIOV). The fw API spec states that for SW2HW_MPT, the lkey field must be zero. Any ConnectX-3 PF driver which checks for strict spec adherence will return failure for SW2HW_MPT if the lkey field is not zero (although the fw in practice ignores this field for SW2HW_MPT). Thus, in order to conform to the fw API spec, set the lkey field to zero before invoking SW2HW_MPT when running SRIOV. Fixes: e630664c ("mlx4_core: Add helper functions to support MR re-registration") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Shen Jing authored
[ Upstream commit a9c85903 ] This reverts commit b4194da3f9087dd38d91b40f9bec42d59ce589a8 since it causes list corruption followed by kernel panic: Workqueue: adb ffs_aio_cancel_worker RIP: 0010:__list_add_valid+0x4d/0x70 Call Trace: insert_work+0x47/0xb0 __queue_work+0xf6/0x400 queue_work_on+0x65/0x70 dwc3_gadget_giveback+0x44/0x50 [dwc3] dwc3_gadget_ep_dequeue+0x83/0x2d0 [dwc3] ? finish_wait+0x80/0x80 usb_ep_dequeue+0x1e/0x90 process_one_work+0x18c/0x3b0 worker_thread+0x3c/0x390 ? process_one_work+0x3b0/0x3b0 kthread+0x11e/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 This issue is seen with warm reboot stability testing. Signed-off-by:
Shen Jing <jingx.shen@intel.com> Signed-off-by:
Saranya Gopal <saranya.gopal@intel.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Denis Bolotin authored
[ Upstream commit ed4eac20 ] The value of "sb_index" is written by the hardware. Reading its value and writing it to "index" must finish before checking the loop condition. Signed-off-by:
-
Denis Bolotin authored
[ Upstream commit 9aaa4e8b ] Release PTT before entering error flow. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit 77e461d1 ] Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW uses this channel for DMAE operations (e.g., TIME_SYNC implementation). Driver also uses the same channel 0 for DMAE operations for some of the PFs (e.g., PF0 on Port0). This could lead to concurrent access to the DMAE channel by FW and driver which is not legal. Hence need to assign unique DMAE id for FW. Currently following DMAE channels are used by the clients, MFW - OCBB/OCSD functionality uses DMAE channel 14/15 Driver 0-3 and 8-11 (for PF dmae operations) 4 and 12 (for stats requests) Assigning unique dmae_id '13' to the FW. Changes from previous version: ------------------------------ v2: Incorporated the review comments. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Filippo Sironi authored
[ Upstream commit ab99be46 ] This register should have been programmed with the physical address of the memory location containing the shadow tail pointer for the guest virtual APIC log instead of the base address. Fixes: 8bda0cfb ('iommu/amd: Detect and initialize guest vAPIC log') Signed-off-by:
Filippo Sironi <sironi@amazon.de> Signed-off-by:
Wei Wang <wawei@amazon.de> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit d7d8bbb4 ] The complete size ("total_size") of the fragmented packet is stored in the fragment header and in the size of the fragment chain. When the fragments are ready for merge, the skbuff's tail of the first fragment is expanded to have enough room after the data pointer for at least total_size. This means that it gets expanded by total_size - first_skb->len. But this is ignoring the fact that after expanding the buffer, the fragment header is pulled by from this buffer. Assuming that the tailroom of the buffer was already 0, the buffer after the data pointer of the skbuff is now only total_size - len(fragment_header) large. When the merge function is then processing the remaining fragments, the code to copy the data over to the merged skbuff will cause an skb_over_panic when it tries to actually put enough data to fill the total_size bytes of the packet. The size of the skb_pull must therefore also be taken into account when the buffer's tailroom is expanded. Fixes: 610bfc6b ("batman-adv: Receive fragmented packets and merge") Reported-by:
Martin Weinelt <martin@darmstadt.freifunk.net> Co-authored-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit f4156f96 ] The announcement messages of batman-adv COMPAT_VERSION 15 have the possibility to announce additional information via a dynamic TVLV part. This part is optional for the ELP packets and currently not parsed by the Linux implementation. Still out-of-tree versions are using it to transport things like neighbor hashes to optimize the rebroadcast behavior. Since the ELP broadcast packets are smaller than the minimal ethernet packet, it often has to be padded. This is often done (as specified in RFC894) with octets of zero and thus work perfectly fine with the TVLV part (making it a zero length and thus empty). But not all ethernet compatible hardware seems to follow this advice. To avoid ambiguous situations when parsing the TVLV header, just force the 4 bytes (TVLV length + padding) after the required ELP header to zero. Fixes: d6f94d91 ("batman-adv: ELP - adding basic infrastructure") Reported-by:
-
