- 14 Oct, 2020 3 commits
-
-
Jiri Olsa authored
Passing build id object to sysfs__read_build_id function, so it can populate the size of the build_id object. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-4-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Pass a build_id object to filename__read_build_id function, so it can populate the size of the build_id object. Changing filename__read_build_id() code for both ELF/non-ELF code. Signed-off-by:
-
Jiri Olsa authored
Replace build_id byte array with struct build_id object and all the code that references it. The objective is to carry size together with build id array, so it's better to keep both together. This is preparatory change for following patches, and there's no functional change. Signed-off-by:
-
- 13 Oct, 2020 16 commits
-
-
Arnaldo Carvalho de Melo authored
We'll use it to ask for extra config files to be loaded, profile like stuff that will be used first to make 'perf trace' mimic 'strace' output via a 'perf strace' command that just sets up 'perf trace' output. At some point it'll be used for regression tests, where we'll run some simple commands like: perf strace ls > perf-strace.output strace ls > strace.output And then do some mutable syscall arg aware diff like tool to deal with arguments for things like mmap, that change at each execution, to be first ignored and then properly tracked when used accoss multiple syscalls. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: -
James Clark authored
Some distros don't come with python2 and only have python3 available. This causes the "'import perf' in python" self test to fail. This change adds python3 to the list of possible python versions that are autodetected but maintains the priorities for 'python2' and 'python' detection. Python3 has the lowest priority. Committer notes: On a fedora system without python2 packages the 'perf test python' continues to work: # python2 bash: python2: command not found... Similar command is: 'python' # rpm -qa | grep python2 # That "Similar command" gives the clue: # rpm -qf /usr/bin/python python-unversioned-command-3.8.5-5.fc32.noarch # rpm -ql python-unversioned-command /usr/bin/python /usr/share/man/man1/python.1.gz # With it in place the 'python' binary is found and perf builds the python binding using python3: # perf test -v python 19: 'import perf' in python : --- start --- test child forked, pid 379988 python usage test: "echo "import sys ; sys.path.append('/tmp/build/perf/python'); import perf" | '/usr/bin/python' " test child finished with 0 ---- end ---- 'import perf' in python: Ok # Looking at that path: # ls -la /tmp/build/perf/python total 1864 drwxrwxr-x. 2 acme acme 60 Oct 13 16:20 . drwxrwxr-x. 18 acme acme 4420 Oct 13 16:28 .. -rwxrwxr-x. 1 acme acme 1907216 Oct 13 16:28 perf.cpython-38-x86_64-linux-gnu.so # And: # ldd ~/bin/perf | grep python libpython3.8.so.1.0 => /lib64/libpython3.8.so.1.0 (0x00007f5471187000) # As soon as we remove it: # rpm -e python-unversioned-command-3.8.5-5.fc32.noarch # hash -r # python bash: python: command not found... Install package 'python-unversioned-command' to provide command 'python'? [N/y] n # And rebuilding perf now doesn't find python in the system: make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j24' parallel build <SNIP> Makefile.config:786: No python interpreter was found: disables Python support - please install python-devel/python-dev <SNIP> After this patch: $ rpm -qi python-unversioned-command package python-unversioned-command is not installed $ $ python bash: python: command not found... Install package 'python-unversioned-command' to provide command 'python'? [N/y] ^C $ $ m make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j24' parallel build <SNIP> CC /tmp/build/perf/tests/attr.o CC /tmp/build/perf/tests/python-use.o DESCEND plugins GEN /tmp/build/perf/python/perf.so INSTALL trace_plugins LD /tmp/build/perf/tests/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> make: Leaving directory '/home/acme/git/perf/tools/perf' 19: 'import perf' in python : Ok $ ldd ~/bin/perf | grep python libpython3.8.so.1.0 => /lib64/libpython3.8.so.1.0 (0x00007f2c8c708000) $ ls -la /tmp/build/perf/python total 1864 drwxrwxr-x. 2 acme acme 60 Oct 13 16:20 . drwxrwxr-x. 18 acme acme 4420 Oct 13 16:31 .. -rwxrwxr-x. 1 acme acme 1907216 Oct 13 16:31 perf.cpython-38-x86_64-linux-gnu.so $ Signed-off-by:James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> LPU-Reference: 20201005080645.6588-1-james.clark@arm.com Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To help figure out where it is getting the binding. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: -
Vasily Gorbik authored
Currently BUILD_BUG() macro is expanded to smth like the following: do { extern void __compiletime_assert_0(void) __attribute__((error("BUILD_BUG failed"))); if (!(!(1))) __compiletime_assert_0(); } while (0); If used in a function body this obviously would produce build errors with -Wnested-externs and -Werror. To enable BUILD_BUG() usage in tools/arch/x86/lib/insn.c which perf includes in intel-pt-decoder, build perf without -Wnested-externs. Reported-by:Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # build tested Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/patch-1.thread-251403.git-2514037e9477.your-ad-here.call-01602244460-ext-7088@work.hoursSigned-off-by:
-
Jiri Slaby authored
'perf trace ls' started crashing after commit d21cb73a on !HAVE_SYSCALL_TABLE_SUPPORT configs (armv7l here) like this: 0 strlen () at ../sysdeps/arm/armv6t2/strlen.S:126 1 0xb6800780 in __vfprintf_internal (s=0xbeff9908, s@entry=0xbeff9900, format=0xa27160 "]: %s()", ap=..., mode_flags=<optimized out>) at vfprintf-internal.c:1688 ... 5 0x0056ecdc in fprintf (__fmt=0xa27160 "]: %s()", __stream=<optimized out>) at /usr/include/bits/stdio2.h:100 6 trace__sys_exit (trace=trace@entry=0xbeffc710, evsel=evsel@entry=0xd968d0, event=<optimized out>, sample=sample@entry=0xbeffc3e8) at builtin-trace.c:2475 7 0x00566d40 in trace__handle_event (sample=0xbeffc3e8, event=<optimized out>, trace=0xbeffc710) at builtin-trace.c:3122 ... 15 main (argc=2, argv=0xbefff6e8) at perf.c:538 It is because memset in trace__read_syscall_info zeroes wrong memory: 1) when initializing for the first time, it does not reset the last id. 2) in other cases, it resets the last id of previous buffer. ad 1) it causes the crash above as sc->name used in the fprintf above contains garbage. ad 2) it sets nonexistent from true back to false for id 11 here. Not sure, what the consequences are. So fix it by introducing a special case for the initial initialization and do the right +1 in both cases. Fixes: d21cb73a ("perf trace: Grow the syscall table as needed when using libaudit") Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20201001093419.15761-1-jslaby@suse.czSigned-off-by:
-
Leo Yan authored
Since commit b027cc6f ("perf c2c: Fix 'perf c2c record -e list' to show the default events used"), "perf c2c" tool can show the memory events properly, it's no reason to still suggest user to use the command "perf mem record -e list" for showing events. This patch updates the usage for showing memory events with command "perf c2c record -e list". Signed-off-by:
Leo Yan <leo.yan@linaro.org> Acked-by:
-
Arnaldo Carvalho de Melo authored
To pick fixes that missed v5.9. Signed-off-by: -
Tzvetomir Stoyanov (VMware) authored
There are internal library functions, which are not declared as a static. They are used inside the library from different files. Hide them from the library users, as they are not part of the API. These functions are made hidden and are renamed without the prefix "tep_": tep_free_plugin_paths tep_peek_char tep_buffer_init tep_get_input_buf_ptr tep_get_input_buf tep_read_token tep_free_token tep_free_event tep_free_format_field __tep_parse_format Link: https://lore.kernel.org/linux-trace-devel/e4afdd82deb5e023d53231bb13e08dca78085fb0.camel@decadent.org.uk/Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: linux-trace-devel@vger.kernel.org Link: http://lore.kernel.org/lkml/20200930110733.280534-1-tz.stoyanov@gmail.comSigned-off-by:
-
Joel Fernandes (Google) authored
The 'perf sched latency' tool is really useful at showing worst-case latencies that task encountered since wakeup. However it shows only the end of the latency. Often times the start of a latency is interesting as it can show what else was going on at the time to cause the latency. I certainly myself spending a lot of time backtracking to the start of the latency in "perf sched script" which wastes a lot of time. This patch therefore adds a new column "Max delay start". Considering this, also rename "Maximum delay at" to "Max delay end" as its easier to understand. Example of the new output: ---------------------------------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end | ---------------------------------------------------------------------------------------------------------------------------------- MediaScannerSer:11936 | 651.296 ms | 67978 | avg: 0.113 ms | max: 77.250 ms | max start: 477.691360 s | max end: 477.768610 s audio@2.0-servi:(3) | 0.000 ms | 3440 | avg: 0.034 ms | max: 72.267 ms | max start: 477.697051 s | max end: 477.769318 s AudioOut_1D:8112 | 0.000 ms | 2588 | avg: 0.083 ms | max: 64.020 ms | max start: 477.710740 s | max end: 477.774760 s Time-limited te:14973 | 7966.090 ms | 24807 | avg: 0.073 ms | max: 15.563 ms | max start: 477.162746 s | max end: 477.178309 s surfaceflinger:8049 | 9.680 ms | 603 | avg: 0.063 ms | max: 13.275 ms | max start: 476.931791 s | max end: 476.945067 s HeapTaskDaemon:(3) | 1588.830 ms | 7040 | avg: 0.065 ms | max: 6.880 ms | max start: 473.666043 s | max end: 473.672922 s mount-passthrou:(3) | 1370.809 ms | 68904 | avg: 0.011 ms | max: 6.524 ms | max start: 478.090630 s | max end: 478.097154 s ReferenceQueueD:(3) | 11.794 ms | 1725 | avg: 0.014 ms | max: 6.521 ms | max start: 476.119782 s | max end: 476.126303 s writer:14077 | 18.410 ms | 1427 | avg: 0.036 ms | max: 6.131 ms | max start: 474.169675 s | max end: 474.175805 s Signed-off-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by:
Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20200925235634.4089867-1-joel@joelfernandes.orgSigned-off-by:
-
Sandipan Das authored
This replaces the incorrectly spelled word "localtion" with "location" in some power8 PMU event descriptions. Fixes: 2a81fa3b ("perf vendor events: Add power8 PMU events") Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Reviewed-by:
Kajol Jain <kjain@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lore.kernel.org/lkml/20201012050205.328523-1-sandipan@linux.ibm.comSigned-off-by:
-
Namhyung Kim authored
For comparison, it now runs the benchmark twice - one if regular -b and another for --buildid-all. $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 21.002 msec (+- 0.172 msec) Average time per event: 2.059 usec (+- 0.017 usec) Average memory usage: 8169 KB (+- 0 KB) Average build-id-all injection took: 19.543 msec (+- 0.124 msec) Average time per event: 1.916 usec (+- 0.012 usec) Average memory usage: 7348 KB (+- 0 KB) Signed-off-by: -
Namhyung Kim authored
Like 'perf record', we can even more speedup build-id processing by just using all DSOs. Then we don't need to look at all the sample events anymore. The following patch will update 'perf bench' to show the result of the --buildid-all option too. Signed-off-by:
Stephane Eranian <eranian@google.com> Acked-by:
-
Namhyung Kim authored
No need to load symbols in a DSO when injecting build-id. I guess the reason was to check the DSO is a special file like anon files. Use some helper functions in map.c to check them before reading build-id. Also pass sample event's cpumode to a new build-id event. It brought a speedup in the benchmark of 25 -> 21 msec on my laptop. Also the memory usage (Max RSS) went down by ~200 KB. # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 21.389 msec (+- 0.138 msec) Average time per event: 2.097 usec (+- 0.014 usec) Average memory usage: 8225 KB (+- 0 KB) Committer notes: Before: $ perf stat -r5 perf bench internals inject-build-id > /dev/null Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 4,020.56 msec task-clock:u # 1.271 CPUs utilized ( +- 0.74% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 123,354 page-faults:u # 0.031 M/sec ( +- 0.81% ) 7,119,951,568 cycles:u # 1.771 GHz ( +- 1.74% ) (83.27%) 230,086,969 stalled-cycles-frontend:u # 3.23% frontend cycles idle ( +- 1.97% ) (83.41%) 1,168,298,765 stalled-cycles-backend:u # 16.41% backend cycles idle ( +- 1.13% ) (83.44%) 11,173,083,669 instructions:u # 1.57 insn per cycle # 0.10 stalled cycles per insn ( +- 1.58% ) (83.31%) 2,413,908,936 branches:u # 600.392 M/sec ( +- 1.69% ) (83.26%) 46,576,289 branch-misses:u # 1.93% of all branches ( +- 2.20% ) (83.31%) 3.1638 +- 0.0309 seconds time elapsed ( +- 0.98% ) $ After: $ perf stat -r5 perf bench internals inject-build-id > /dev/null Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 2,379.94 msec task-clock:u # 1.473 CPUs utilized ( +- 0.18% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 62,584 page-faults:u # 0.026 M/sec ( +- 0.07% ) 2,372,389,668 cycles:u # 0.997 GHz ( +- 0.29% ) (83.14%) 106,937,862 stalled-cycles-frontend:u # 4.51% frontend cycles idle ( +- 4.89% ) (83.20%) 581,697,915 stalled-cycles-backend:u # 24.52% backend cycles idle ( +- 0.71% ) (83.47%) 3,659,692,199 instructions:u # 1.54 insn per cycle # 0.16 stalled cycles per insn ( +- 0.10% ) (83.63%) 791,372,961 branches:u # 332.518 M/sec ( +- 0.27% ) (83.39%) 10,648,083 branch-misses:u # 1.35% of all branches ( +- 0.22% ) (83.16%) 1.61570 +- 0.00172 seconds time elapsed ( +- 0.11% ) $ Signed-off-by: -
Namhyung Kim authored
It should be in a proper mnt namespace when accessing the file. I think this had no problem since the build-id was actually read from map__load() -> dso__load() already. But I'd like to change it in the following commit. Acked-by:
-
Namhyung Kim authored
I found some events (like PERF_RECORD_CGROUP) are not copied by perf inject due to the missing callbacks. Let's add them. While at it, I've changed the order of the callbacks to match with struct perf_tool so that we can compare them easily. Acked-by:
-
Namhyung Kim authored
Sometimes I can see that 'perf record' piped with 'perf inject' take a long time processing build-ids. So introduce a inject-build-id benchmark to the internals benchmark suite to measure its overhead regularly. It runs the 'perf inject' command internally and feeds the given number of synthesized events (MMAP2 + SAMPLE basically). Usage: perf bench internals inject-build-id <options> -i, --iterations <n> Number of iterations used to compute average (default: 100) -m, --nr-mmaps <n> Number of mmap events for each iteration (default: 100) -n, --nr-samples <n> Number of sample events per mmap event (default: 100) -v, --verbose be more verbose (show iteration count, DSO name, etc) By default, it measures average processing time of 100 MMAP2 events and 10000 SAMPLE events. Below is a result on my laptop. $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 25.789 msec (+- 0.202 msec) Average time per event: 2.528 usec (+- 0.020 usec) Average memory usage: 8411 KB (+- 7 KB) Committer testing: $ perf bench Usage: perf bench [<common options>] <collection> <benchmark> [<options>] # List of all available benchmark collections: sched: Scheduler and IPC benchmarks syscall: System call benchmarks mem: Memory access benchmarks numa: NUMA scheduling and MM benchmarks futex: Futex stressing benchmarks epoll: Epoll stressing benchmarks internals: Perf-internals benchmarks all: All benchmarks $ perf bench internals # List of available benchmarks for collection 'internals': synthesize: Benchmark perf event synthesis kallsyms-parse: Benchmark kallsyms parsing inject-build-id: Benchmark build-id injection $ perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.202 msec (+- 0.059 msec) Average time per event: 1.392 usec (+- 0.006 usec) Average memory usage: 12650 KB (+- 10 KB) Average build-id-all injection took: 12.831 msec (+- 0.071 msec) Average time per event: 1.258 usec (+- 0.007 usec) Average memory usage: 11895 KB (+- 10 KB) $ $ perf stat -r5 perf bench internals inject-build-id # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.380 msec (+- 0.056 msec) Average time per event: 1.410 usec (+- 0.006 usec) Average memory usage: 12608 KB (+- 11 KB) Average build-id-all injection took: 11.889 msec (+- 0.064 msec) Average time per event: 1.166 usec (+- 0.006 usec) Average memory usage: 11838 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.246 msec (+- 0.065 msec) Average time per event: 1.397 usec (+- 0.006 usec) Average memory usage: 12744 KB (+- 10 KB) Average build-id-all injection took: 12.019 msec (+- 0.066 msec) Average time per event: 1.178 usec (+- 0.006 usec) Average memory usage: 11963 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.321 msec (+- 0.067 msec) Average time per event: 1.404 usec (+- 0.007 usec) Average memory usage: 12690 KB (+- 10 KB) Average build-id-all injection took: 11.909 msec (+- 0.041 msec) Average time per event: 1.168 usec (+- 0.004 usec) Average memory usage: 11938 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.287 msec (+- 0.059 msec) Average time per event: 1.401 usec (+- 0.006 usec) Average memory usage: 12864 KB (+- 10 KB) Average build-id-all injection took: 11.862 msec (+- 0.058 msec) Average time per event: 1.163 usec (+- 0.006 usec) Average memory usage: 12103 KB (+- 10 KB) # Running 'internals/inject-build-id' benchmark: Average build-id injection took: 14.402 msec (+- 0.053 msec) Average time per event: 1.412 usec (+- 0.005 usec) Average memory usage: 12876 KB (+- 10 KB) Average build-id-all injection took: 11.826 msec (+- 0.061 msec) Average time per event: 1.159 usec (+- 0.006 usec) Average memory usage: 12111 KB (+- 10 KB) Performance counter stats for 'perf bench internals inject-build-id' (5 runs): 4,267.48 msec task-clock:u # 1.502 CPUs utilized ( +- 0.14% ) 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 102,092 page-faults:u # 0.024 M/sec ( +- 0.08% ) 3,894,589,578 cycles:u # 0.913 GHz ( +- 0.19% ) (83.49%) 140,078,421 stalled-cycles-frontend:u # 3.60% frontend cycles idle ( +- 0.77% ) (83.34%) 948,581,189 stalled-cycles-backend:u # 24.36% backend cycles idle ( +- 0.46% ) (83.25%) 5,835,587,719 instructions:u # 1.50 insn per cycle # 0.16 stalled cycles per insn ( +- 0.21% ) (83.24%) 1,267,423,636 branches:u # 296.996 M/sec ( +- 0.22% ) (83.12%) 17,484,290 branch-misses:u # 1.38% of all branches ( +- 0.12% ) (83.55%) 2.84176 +- 0.00222 seconds time elapsed ( +- 0.08% ) $ Acked-by:
-
- 07 Oct, 2020 1 commit
-
-
Namhyung Kim authored
It was reported that 'perf stat' crashed when using with armv8_pmu (CPU) events with the task mode. As 'perf stat' uses an empty cpu map for task mode but armv8_pmu has its own cpu mask, it has confused which map it should use when accessing file descriptors and this causes segfaults: (gdb) bt #0 0x0000000000603fc8 in perf_evsel__close_fd_cpu (evsel=<optimized out>, cpu=<optimized out>) at evsel.c:122 #1 perf_evsel__close_cpu (evsel=evsel@entry=0x716e950, cpu=7) at evsel.c:156 #2 0x00000000004d4718 in evlist__close (evlist=0x70a7cb0) at util/evlist.c:1242 #3 0x0000000000453404 in __run_perf_stat (argc=3, argc@entry=1, argv=0x30, argv@entry=0xfffffaea2f90, run_idx=119, run_idx@entry=1701998435) at builtin-stat.c:929 #4 0x0000000000455058 in run_perf_stat (run_idx=1701998435, argv=0xfffffaea2f90, argc=1) at builtin-stat.c:947 #5 cmd_stat (argc=1, argv=0xfffffaea2f90) at builtin-stat.c:2357 #6 0x00000000004bb888 in run_builtin (p=p@entry=0x9764b8 <commands+288>, argc=argc@entry=4, argv=argv@entry=0xfffffaea2f90) at perf.c:312 #7 0x00000000004bbb54 in handle_internal_command (argc=argc@entry=4, argv=argv@entry=0xfffffaea2f90) at perf.c:364 #8 0x0000000000435378 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:408 #9 main (argc=4, argv=0xfffffaea2f90) at perf.c:538 To fix this, I simply used the given cpu map unless the evsel actually is not a system-wide event (like uncore events). Fixes: 7736627b ("perf stat: Use affinity for closing file descriptors") Reported-by:Wei Li <liwei391@huawei.com> Signed-off-by:
Barry Song <song.bao.hua@hisilicon.com> Acked-by:
-
- 01 Oct, 2020 3 commits
-
-
Jiri Olsa authored
Hagen reported broken strings in python3 tracepoint scripts: make PYTHON=python3 perf record -e sched:sched_switch -a -- sleep 5 perf script --gen-script py perf script -s ./perf-script.py [..] sched__sched_switch 7 563231.759525792 0 swapper prev_comm=bytearray(b'swapper/7\x00\x00\x00\x00\x00\x00\x00'), prev_pid=0, prev_prio=120, prev_state=, next_comm=bytearray(b'mutex-thread-co\x00'), The problem is in the is_printable_array function that does not take the zero byte into account and claim such string as not printable, so the code will create byte array instead of string. Committer testing: After this fix: sched__sched_switch 3 484522.497072626 1158680 kworker/3:0-eve prev_comm=kworker/3:0, prev_pid=1158680, prev_prio=120, prev_state=I, next_comm=swapper/3, next_pid=0, next_prio=120 Sample: {addr=0, cpu=3, datasrc=84410401, datasrc_decode=N/A|SNP N/A|TLB N/A|LCK N/A, ip=18446744071841817196, period=1, phys_addr=0, pid=1158680, tid=1158680, time=484522497072626, transaction=0, values=[(0, 0)], weight=0} sched__sched_switch 4 484522.497085610 1225814 perf prev_comm=perf, prev_pid=1225814, prev_prio=120, prev_state=, next_comm=migration/4, next_pid=30, next_prio=0 Sample: {addr=0, cpu=4, datasrc=84410401, datasrc_decode=N/A|SNP N/A|TLB N/A|LCK N/A, ip=18446744071841817196, period=1, phys_addr=0, pid=1225814, tid=1225814, time=484522497085610, transaction=0, values=[(0, 0)], weight=0} Fixes: 249de6e0 ("perf script python: Fix string vs byte array resolving") Signed-off-by:Hagen Paul Pfeifer <hagen@jauu.net> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200928201135.3633850-1-jolsa@kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
No change in behaviour: # perf trace -e mmap sleep 1 0.000 ( 0.009 ms): sleep/751870 mmap(len: 143317, prot: READ, flags: PRIVATE, fd: 3) = 0x7fa96d0f7000 0.028 ( 0.004 ms): sleep/751870 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) = 0x7fa96d0f5000 0.037 ( 0.005 ms): sleep/751870 mmap(len: 1872744, prot: READ, flags: PRIVATE|DENYWRITE, fd: 3) = 0x7fa96cf2b000 0.044 ( 0.011 ms): sleep/751870 mmap(addr: 0x7fa96cf50000, len: 1376256, prot: READ|EXEC, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x25000) = 0x7fa96cf50000 0.056 ( 0.007 ms): sleep/751870 mmap(addr: 0x7fa96d0a0000, len: 307200, prot: READ, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x175000) = 0x7fa96d0a0000 0.064 ( 0.007 ms): sleep/751870 mmap(addr: 0x7fa96d0eb000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 0x1bf000) = 0x7fa96d0eb000 0.075 ( 0.005 ms): sleep/751870 mmap(addr: 0x7fa96d0f1000, len: 13160, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) = 0x7fa96d0f1000 0.253 ( 0.005 ms): sleep/751870 mmap(len: 218049136, prot: READ, flags: PRIVATE, fd: 3) = 0x7fa95ff38000 # # # set -o vi # strace -e mmap sleep 1 mmap(NULL, 143317, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f333bd83000 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f333bd81000 mmap(NULL, 1872744, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f333bbb7000 mmap(0x7f333bbdc000, 1376256, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x25000) = 0x7f333bbdc000 mmap(0x7f333bd2c000, 307200, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x175000) = 0x7f333bd2c000 mmap(0x7f333bd77000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1bf000) = 0x7f333bd77000 mmap(0x7f333bd7d000, 13160, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f333bd7d000 mmap(NULL, 218049136, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f332ebc4000 +++ exited with 0 +++ # And you can as well tweak 'perf trace's output to more closely match strace's: # perf config trace.show_arg_names=no # perf config trace.show_duration=no # perf config trace.show_prefix=yes # perf config trace.show_timestamp=no # perf config trace.show_zeros=yes # perf config trace.no_inherit=yes # perf trace -e mmap sleep 1 mmap(NULL, 143317, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f0d287ca000 mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS) = 0x7f0d287c8000 mmap(NULL, 1872744, PROT_READ, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0d285fe000 mmap(0x7f0d28623000, 1376256, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x25000) = 0x7f0d28623000 mmap(0x7f0d28773000, 307200, PROT_READ, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x175000) = 0x7f0d28773000 mmap(0x7f0d287be000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1bf000) = 0x7f0d287be000 mmap(0x7f0d287c4000, 13160, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS) = 0x7f0d287c4000 mmap(NULL, 218049136, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f0d1b60b000 # # perf config | grep ^trace trace.show_arg_names=no trace.show_duration=no trace.show_prefix=yes trace.show_timestamp=no trace.show_zeros=yes trace.no_inherit=yes # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: -
Arnaldo Carvalho de Melo authored
Will be wired up in the following csets: $ tools/perf/trace/beauty/mmap_prot.sh static const char *mmap_prot[] = { [ilog2(0x1) + 1] = "READ", #ifndef PROT_READ #define PROT_READ 0x1 #endif [ilog2(0x2) + 1] = "WRITE", #ifndef PROT_WRITE #define PROT_WRITE 0x2 #endif [ilog2(0x4) + 1] = "EXEC", #ifndef PROT_EXEC #define PROT_EXEC 0x4 #endif [ilog2(0x8) + 1] = "SEM", #ifndef PROT_SEM #define PROT_SEM 0x8 #endif [ilog2(0x01000000) + 1] = "GROWSDOWN", #ifndef PROT_GROWSDOWN #define PROT_GROWSDOWN 0x01000000 #endif [ilog2(0x02000000) + 1] = "GROWSUP", #ifndef PROT_GROWSUP #define PROT_GROWSUP 0x02000000 #endif }; $ $ $ $ tools/perf/trace/beauty/mmap_prot.sh alpha static const char *mmap_prot[] = { [ilog2(0x4) + 1] = "EXEC", #ifndef PROT_EXEC #define PROT_EXEC 0x4 #endif [ilog2(0x01000000) + 1] = "GROWSDOWN", #ifndef PROT_GROWSDOWN #define PROT_GROWSDOWN 0x01000000 #endif [ilog2(0x02000000) + 1] = "GROWSUP", #ifndef PROT_GROWSUP #define PROT_GROWSUP 0x02000000 #endif [ilog2(0x1) + 1] = "READ", #ifndef PROT_READ #define PROT_READ 0x1 #endif [ilog2(0x8) + 1] = "SEM", #ifndef PROT_SEM #define PROT_SEM 0x8 #endif [ilog2(0x2) + 1] = "WRITE", #ifndef PROT_WRITE #define PROT_WRITE 0x2 #endif }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
- 30 Sep, 2020 1 commit
-
-
Arnaldo Carvalho de Melo authored
So that in older systems we get it in the mmap flags scnprintf routines: $ tools/perf/trace/beauty/mmap_flags.sh | head -9 2> /dev/null static const char *mmap_flags[] = { [ilog2(0x40) + 1] = "32BIT", #ifndef MAP_32BIT #define MAP_32BIT 0x40 #endif [ilog2(0x01) + 1] = "SHARED", #ifndef MAP_SHARED #define MAP_SHARED 0x01 #endif $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
- 29 Sep, 2020 2 commits
-
-
Arnaldo Carvalho de Melo authored
It'll also conditionally generate the defines, so that if we don't have those when building a new tool tarball in an older systems, we get those, and we need them sometimes in the actual scnprintf routine, such as when checking if a flags means we have an extra arg, like with MREMAP_FIXED. $ tools/perf/trace/beauty/mremap_flags.sh static const char *mremap_flags[] = { [ilog2(1) + 1] = "MAYMOVE", #ifndef MREMAP_MAYMOVE #define MREMAP_MAYMOVE 1 #endif [ilog2(2) + 1] = "FIXED", #ifndef MREMAP_FIXED #define MREMAP_FIXED 2 #endif [ilog2(4) + 1] = "DONTUNMAP", #ifndef MREMAP_DONTUNMAP #define MREMAP_DONTUNMAP 4 #endif }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: -
Arnaldo Carvalho de Melo authored
Some headers are not used in building the tools directly, but instead to generate tables that then gets source code included to do id->string and string->id lookups for things like syscall flags and commands. We were adding it directly to tools/include/ and this sometimes gets in the way of building using system headers, lets untangle this a bit. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
- 28 Sep, 2020 12 commits
-
-
Arnaldo Carvalho de Melo authored
To pick up fixes and get v5.10 development in sync with the main kernel sources. Signed-off-by: -
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - NFSv4.2: copy_file_range needs to invalidate caches on success - NFSv4.2: Fix security label length not being reset - pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read - pNFS/flexfiles: Fix signed/unsigned type issues with mirror indices" * tag 'nfs-for-5.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: pNFS/flexfiles: Be consistent about mirror index types pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read NFSv4.2: fix client's attribute cache management for copy_file_range nfs: Fix security label length not being reset -
Jason A. Donenfeld authored
It seems likely this block was pasted from internal_get_user_pages_fast, which is not passed an mm struct and therefore uses current's. But __get_user_pages_locked is passed an explicit mm, and current->mm is not always valid. This was hit when being called from i915, which uses: pin_user_pages_remote-> __get_user_pages_remote-> __gup_longterm_locked-> __get_user_pages_locked Before, this would lead to an OOPS: BUG: kernel NULL pointer dereference, address: 0000000000000064 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page CPU: 10 PID: 1431 Comm: kworker/u33:1 Tainted: P S U O 5.9.0-rc7+ #140 Hardware name: LENOVO 20QTCTO1WW/20QTCTO1WW, BIOS N2OET47W (1.34 ) 08/06/2020 Workqueue: i915-userptr-acquire __i915_gem_userptr_get_pages_worker [i915] RIP: 0010:__get_user_pages_remote+0xd7/0x310 Call Trace: __i915_gem_userptr_get_pages_worker+0xc8/0x260 [i915] process_one_work+0x1ca/0x390 worker_thread+0x48/0x3c0 kthread+0x114/0x130 ret_from_fork+0x1f/0x30 CR2: 0000000000000064 This commit fixes the problem by using the mm pointer passed to the function rather than the bogus one in current. Fixes: 008cfe44 ("mm: Introduce mm_struct.has_pinned") Tested-by:Chris Wilson <chris@chris-wilson.co.uk> Reported-by:
Harald Arnesen <harald@skogtun.org> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Reviewed-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ian Rogers authored
Ensure 'st' is initialized before an error branch is taken. Fixes test "67: Parse and process metrics" with LLVM msan: ==6757==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x5570edae947d in rblist__exit tools/perf/util/rblist.c:114:2 #1 0x5570edb1c6e8 in runtime_stat__exit tools/perf/util/stat-shadow.c:141:2 #2 0x5570ed92cfae in __compute_metric tools/perf/tests/parse-metric.c:187:2 #3 0x5570ed92cb74 in compute_metric tools/perf/tests/parse-metric.c:196:9 #4 0x5570ed92c6d8 in test_recursion_fail tools/perf/tests/parse-metric.c:318:2 #5 0x5570ed92b8c8 in test__parse_metric tools/perf/tests/parse-metric.c:356:2 #6 0x5570ed8de8c1 in run_test tools/perf/tests/builtin-test.c:410:9 #7 0x5570ed8ddadf in test_and_print tools/perf/tests/builtin-test.c:440:9 #8 0x5570ed8dca04 in __cmd_test tools/perf/tests/builtin-test.c:661:4 #9 0x5570ed8dbc07 in cmd_test tools/perf/tests/builtin-test.c:807:9 #10 0x5570ed7326cc in run_builtin tools/perf/perf.c:313:11 #11 0x5570ed731639 in handle_internal_command tools/perf/perf.c:365:8 #12 0x5570ed7323cd in run_argv tools/perf/perf.c:409:2 #13 0x5570ed731076 in main tools/perf/perf.c:539:3 Fixes: commit f5a56570 ("perf test: Fix memory leaks in parse-metric test") Signed-off-by:Nick Desaulniers <ndesaulniers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: clang-built-linux@googlegroups.com Link: http://lore.kernel.org/lkml/20200923210655.4143682-1-irogers@google.comSigned-off-by:
-
Ian Rogers authored
perf_event_attr bp_addr is a u64. parse-events.y parses it as a u64, but casts it to a void* and then parse-events.c casts it back to a u64. Rather than all the casts, change the type of the address to be a u64. This removes an issue noted in: https://lore.kernel.org/lkml/20200903184359.GC3495158@kernel.org/Signed-off-by:
-
Namhyung Kim authored
It'll expand given events for cgroups A, B and C. $ perf test -v expansion 69: Event expansion for cgroups : --- start --- test child forked, pid 983140 metric expr 1 / IPC for CPI metric expr instructions / cycles for IPC found event instructions found event cycles adding {instructions,cycles}:W copying metric event for cgroup 'A': instructions (idx=0) copying metric event for cgroup 'B': instructions (idx=0) copying metric event for cgroup 'C': instructions (idx=0) test child finished with 0 ---- end ---- Event expansion for cgroups: Ok Signed-off-by: -
Namhyung Kim authored
This is a preparation for a test case of expanding events for multiple cgroups. Instead of using real system cgroup, the test will use fake cgroups so it needs a way to have them without a open file descriptor. Signed-off-by:
-
Namhyung Kim authored
The metricgroup__copy_metric_events() is to handle metrics events when expanding event for cgroups. As the metric events keep pointers to evsel, it should be refreshed when events are cloned during the operation. The perf_stat__collect_metric_expr() is also called in case an event has a metric directly. During the copy, it references evsel by index as the evlist now has cloned evsels for the given cgroup. Also kernel test robot found an issue in the python module import so add empty implementations of those two functions to fix it. Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
-
Namhyung Kim authored
The --for-each-cgroup option is a syntax sugar to monitor large number of cgroups easily. Current command line requires to list all the events and cgroups even if users want to monitor same events for each cgroup. This patch addresses that usage by copying given events for each cgroup on user's behalf. For instance, if they want to monitor 6 events for 200 cgroups each they should write 1200 event names (with -e) AND 1200 cgroup names (with -G) on the command line. But with this change, they can just specify 6 events and 200 cgroups with a new option. A simpler example below: It wants to measure 3 events for 2 cgroups ('A' and 'B'). The result is that total 6 events are counted like below. $ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1 Performance counter stats for 'system wide': 988.18 msec cpu-clock A # 0.987 CPUs utilized 3,153,761,702 cycles A # 3.200 GHz (100.00%) 8,067,769,847 instructions A # 2.57 insn per cycle (100.00%) 982.71 msec cpu-clock B # 0.982 CPUs utilized 3,136,093,298 cycles B # 3.182 GHz (99.99%) 8,109,619,327 instructions B # 2.58 insn per cycle (99.99%) 1.001228054 seconds time elapsed Signed-off-by: -
Namhyung Kim authored
The evsel__clone() is to create an exactly same evsel from same attributes. The function assumes the given evsel is not configured yet so it cares fields set during event parsing. Those fields are now moved together as Jiri suggested. Note that metric events will be handled by later patch. It will be used by perf stat to generate separate events for each cgroup. Signed-off-by:
-
Jin Yao authored
- Update SkylakeX events to v1.21. - Update SkylakeX JSON metrics from TMAM 4.0. Other fixes: - Add NO_NMI_WATCHDOG metric constraint to Backend_Bound - Fix misspelled error Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Reviewed-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
-
Jin Yao authored
- Update CascadelakeX events to v1.08. - Update CascadelakeX JSON metrics from TMAM 4.0. Other fixes: - Add NO_NMI_WATCHDOG metric constraint to Backend_Bound - Change 'MB/sec' to 'MB' in UNC_M_PMM_BANDWIDTH. Signed-off-by:
-
- 27 Sep, 2020 2 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - ignore compiler stubs for PPC to fix builds - fix the usage of --target mentioned in the LLVM document * tag 'kbuild-fixes-v5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation/llvm: Fix clang target examples scripts/kallsyms: skip ppc compiler stub *.long_branch.* / *.plt_branch.*
-
