- 14 Oct, 2014 40 commits
-
-
Arnd Bergmann authored
As pointed out by Sergei Shtylyov, the pcf8563_irq function contains a bug in the error handling: an interrupt handler is not supposed to return an errno value but an 'enum irqreturn'. Let's fix this by returning IRQ_NONE in case of a communication error. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Arnd Bergmann authored
gcc-4.9 found a potential condition under which the 'pending' variable may be used uninitialized: drivers/rtc/rtc-pcf8563.c: In function 'pcf8563_irq': drivers/rtc/rtc-pcf8563.c:173:5: warning: 'pending' may be used uninitialized in this function [-Wmaybe-uninitialized] This is because in the pcf8563_get_alarm_mode() function, we check any nonzero return of pcf8563_read_block_data, but in the irq function we only check for negative values, so a possible positive value does not get detected if the compiler chooses not to inline the entire call chain. Checking for any non-zero value in the interrupt handler as well is just as correct and lets the compiler know what we are doing, without needing a bogus initialization. Signed-off-by:
-
Javier Martinez Canillas authored
The MAX7802 PMIC has a Real-Time-Clock (RTC) with two alarms. This patch adds support for the RTC and is based on a driver added by Simon Glass to the Chrome OS kernel 3.8 tree. [akpm@linux-foundation.org: add comment clarifying ffs() use] Signed-off-by:
Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Olof Johansson <olof@lixom.net> Cc: Simon Glass <sjg@chromium.org> Signed-off-by:
-
Javier Martinez Canillas authored
max77686_rtc_calculate_wday() is used to calculate the day of the week to be filled in struct rtc_time but that function only calculates the number of bits shifted. So the ffs() function can be used to find the first bit set instead of a special function. [akpm@linux-foundation.org: add comment clarifying ffs() use] Signed-off-by:
-
Javier Martinez Canillas authored
If devm_rtc_device_register() fails a dev_err() is already reported so there is no need to do an additional dev_info(). Signed-off-by:
-
Javier Martinez Canillas authored
The max77686 mfd driver adds a regmap IRQ chip which creates an IRQ domain that is used to map the virtual RTC alarm1 interrupt. The RTC driver assumes that this will always be true since the PMIC IRQ is a required property according to the max77686 DT binding doc. If an "interrupts" property is not defined for a max77686 PMIC, then the mfd probe function will fail and the RTC platform driver will never be probed. But even when it is not possible to probe the rtc-max77686 driver without a regmap IRQ chip, it's better to explicitly check if the IRQ chip data is not NULL and gracefully fail instead of getting an OOPS. Signed-off-by:
-
Javier Martinez Canillas authored
The MAX77686 RTC chip has two features called SMPL (Sudden Momentary Power Loss) and WTSR (Watchdog Timeout and Software Resets). Support for these features seems to be implemented in the driver but compilation is disabled using a C pre-processor conditional. This code has been disabled since the driver was original merged in commit fca1dd03 ("rtc: max77686: add Maxim 77686 driver"). So, since this code has never been built, let's just remove it. Signed-off-by:
-
Doug Anderson authored
This series add support for the Real Time clock present in the Maxim 77802 Power Managment IC. The version number is quite high because it previously was part of a bigger series [0] that aimed to add support for all the devices in the max77802 PMIC. But now that the max77802 dependencies were already merged for 3.17, the series were split but I kept the version numbering. While working on the max77802 rtc support a lot of feedback was given and the issues pointed out also apply to a driver for a similar PMIC RTC (max77686). So patches 01/06 to 05/06 in the series are cleanups for the max77686 driver and patch 06/06 adds the support for the max77802 RTC. The series were tested on an Exynos5250 Snow (max77686) and Exynos5420 Peach Pit (max77802) machines. This patch (of 6): The max77686 includes an RTC that keeps power during suspend. It's convenient to be able to use it as a wakeup source. Signed-off-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
-
Pavel Machek authored
BQ32000 have "trickle chargers". Introduce a device tree binding for specifying the trickle charger configuration for that. Signed-off-by:
Pavel Machek <pavel@denx.de> Reviewed-by:
Jason Cooper <jason@lakedameon.net> Cc: Matti Vaittinen <matti.vaittinen@nsn.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Pavel Machek authored
BQ32000 devices have "trickle chargers". Introduce a code to enable the charger, based on device tree. Without charger, RTC does not keep time after power off. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Matti Vaittinen authored
Some DS13XX devices have "trickle chargers". Introduce a device tree binding for specifying the trickle charger configuration for ds1339. Only ds1339 dt binding is supported because this is the only chip I have. I _assume_ the code would have worked on other allready supported chips. However I cannot check the resistor values for the other chips or test them. For other chips the driver code works as earlier Eg. it does not check the dt bindings at all Signed-off-by:
Matti Vaittinen <matti.vaittinen@nsn.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pavel Machek <pavel@denx.de> Signed-off-by:
-
Matti Vaittinen authored
Some DS13XX devices have "trickle chargers". Introduce a device tree binding for the resistor and diode configuration for enabling trickle charger. Signed-off-by:
Jason Cooper <jason@lakedaemon.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pavel Machek <pavel@denx.de> Signed-off-by:
-
Chris Zhong authored
This is the initial version of the RK808 PMIC. This is a power management IC for multimedia products. It provides regulators that are able to supply power to processor cores and other components. The chip provides other modules including RTC, Clockout. Signed-off-by:
Chris Zhong <zyw@rock-chips.com> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Samuel Ortiz <sameo@linux.intel.com> says: Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Olof Johansson <olof@lixom.net> Cc: Dmitry Torokhov <dtor@chromium.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Chris Zhong authored
This is the initial version of the RK808 PMIC. This is a power management IC for multimedia products. It provides regulators that are able to supply power to processor cores and other components. The chip provides other modules including RTC, Clockout. Add RTC driver for supporting RTC device present inside RK808 PMIC. [akpm@linux-foundation.org: make tm_def static] Signed-off-by:
Zhang Qing <zhangqing@rock-chips.com> Tested-by:
-
Uwe Kleine-König authored
of_device_ids (i.e. compatible strings and the respective data) are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. This allows to mark all struct of_device_id below drivers/rtc const, too. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Chanwoo Choi authored
Fix wrong compatible string of Exynos3250 RTC (Real-Time Clock) dt node. The RTC of Exynos3250 must need additional source clock (XrtcXTI). Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Acked-by:
Kyungmin Park <kyungmin.park@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Chanwoo Choi authored
Add support for RTC of Exynos3250 SoC. The Exynos3250 needs source clock(32.768KHz) for RTC block. If source clock of RTC is registerd on clock list of common clk framework, Exynos RTC drvier have to control this clock. Clock list for s3c-rtc device: - rtc : CLK_RTC of CLK_GATE_IP_PERIR is gate clock for RTC. - rtc_src : XrtcXTI is 32.768.kHz source clock for RTC. (XRTCXTI: Specifies a clock from 32.768 kHz crystal pad with XRTCXTI and XRTCXTO pins. RTC uses this clock as the source of a real-time clock.) Signed-off-by:
-
Chanwoo Choi authored
Add s3c_rtc_data structure to variant data according to SoC type. The s3c_rtc_data structure includes some functions to control RTC operation and specific data dependent on SoC type. Signed-off-by:
-
Chanwoo Choi authored
Remove warning message when checking codeing style with checkpatch script and reduce un-necessary i2c read operation on s3c_rtc_enable. WARNING: line over 80 characters #406: FILE: drivers/rtc/rtc-s3c.c:406: + if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_RTCEN) == 0) { WARNING: line over 80 characters #414: FILE: drivers/rtc/rtc-s3c.c:414: + if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_CNTSEL)) { WARNING: line over 80 characters #422: FILE: drivers/rtc/rtc-s3c.c:422: + if ((readw(info->base + S3C2410_RTCCON) & S3C2410_RTCCON_CLKRST)) { WARNING: Missing a blank line after declarations #451: FILE: drivers/rtc/rtc-s3c.c:451: + struct s3c_rtc_drv_data *data; + if (pdev->dev.of_node) { WARNING: Missing a blank line after declarations #453: FILE: drivers/rtc/rtc-s3c.c:453: + const struct of_device_id *match; + match = of_match_node(s3c_rtc_dt_match, pdev->dev.of_node); WARNING: DT compatible string "samsung,s3c2416-rtc" appears un-documented -- check ./Documentation/devicetree/bindings/ #650: FILE: drivers/rtc/rtc-s3c.c:650: + .compatible = "samsung,s3c2416-rtc", WARNING: DT compatible string "samsung,s3c2443-rtc" appears un-documented -- check ./Documentation/devicetree/bindings/ #653: FILE: drivers/rtc/rtc-s3c.c:653: + .compatible = "samsung,s3c2443-rtc", Signed-off-by: -
Chanwoo Choi authored
Define s3c_rtc structure including necessary variables for S3C RTC device instead of global variables. This patch improves the readability by removing global variables. Signed-off-by:
-
Julia Lawall authored
Use c99 initializers for structures. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @decl@ identifier i1,fld; type T; field list[n] fs; @@ struct i1 { fs T fld; ...}; @bad@ identifier decl.i1,i2; expression e; initializer list[decl.n] is; @@ struct i1 i2 = { is, + .fld = e - e ,...}; // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
NeilBrown authored
This documents autofs from the perspective of what the module actually supports rather than how automount is expected to use it. It is formatted using "markdown" and works best with Markdown.pl (markdown_py doesn't like some constructs). [rdunlap@infradead.org: copy editing] Signed-off-by:
NeilBrown <neilb@suse.de> Cc: Randy Dunlap <rdunlap@infradead.org> Acked-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
NeilBrown authored
If rcu-walk mode we don't *have* to return -EISDIR for non-mount-traps as we will simply drop into REF-walk and handling DCACHE_NEED_AUTOMOUNT dentrys the slow way. But it is better if we do when possible. In 'oz_mode', use the same condition as ref-walk: if not a mountpoint, then it must be -EISDIR. In regular mode there are most tests needed. Most of them can be performed without taking any spinlocks. If we find a directory that isn't obviously empty, and isn't mounted on, we need to call 'simple_empty()' which does take a spinlock. If this turned out to hurt performance, some other approach could be found to signal when a directory is known to be empty. Signed-off-by:
-
NeilBrown authored
->fs_lock protects AUTOFS_INF_EXPIRING. We need to be sure that once the flag is set, no new references beneath the dentry are taken. So rcu-walk currently needs to take fs_lock before checking the flag. This hurts performance. Change the expiry to a two-stage process. First set AUTOFS_INF_NO_RCU which forces any path walk into ref-walk mode, then drop the lock and call synchronize_rcu(). Once that returns we can be sure no rcu-walk is active beneath the dentry and we can check reference counts again. Now during an RCU-walk we can test AUTOFS_INF_EXPIRING without taking the lock as along as we test AUTOFS_INF_NO_RCU too. If either are set, we must abort the RCU-walk If neither are set, we know that refcounts will be tested again after we finish the RCU-walk so we are safe to continue. ->fs_lock is still taken in d_manage() to check for a non-trap directory. That will be resolved in the next patch. Signed-off-by:
-
NeilBrown authored
Have a "test" function change the value it is testing can be confusing, particularly as a future patch will be calling this function twice. So move the update for 'last_used' to avoid repeat expiry to the place where the final determination on what to expire is known. Signed-off-by:
-
NeilBrown authored
Future patch will potentially call this twice, so make it separate. Signed-off-by:
-
NeilBrown authored
This series teaches autofs about RCU-walk so that we don't drop straight into REF-walk when we hit an autofs directory, and so that we avoid spinlocks as much as possible when performing an RCU-walk. This is needed so that the benefits of the recent NFS support for RCU-walk are fully available when NFS filesystems are automounted. Patches have been carefully reviewed and tested both with test suites and in production - thanks a lot to Ian Kent for his support there. This patch (of 6): Any attempt to look up a pathname that passes though an autofs4 mount is currently forced out of RCU-walk into REF-walk. This can significantly hurt performance of many-thread work loads on many-core systems, especially if the automounted filesystem supports RCU-walk but doesn't get to benefit from it. So if autofs4_d_manage is called with rcu_walk set, only fail with -ECHILD if it is necessary to wait longer than a spinlock. Signed-off-by:
-
Fabian Frederick authored
sys_tz is already declared in include/linux/time.h Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Petr Vandrovec <petr@vandrovec.name> Signed-off-by:
-
Rob Jones authored
Reduce boilerplate code by using __seq_open_private() instead of seq_open() in kallsyms_open(). Signed-off-by:
Rob Jones <rob.jones@codethink.co.uk> Cc: Gideon Israel Dsouza <gidisrael@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
gcc-4.9 on ARM gives us a mysterious warning about the binfmt_misc parse_command function: fs/binfmt_misc.c: In function 'parse_command.part.3': fs/binfmt_misc.c:405:7: warning: array subscript is above array bounds [-Warray-bounds] I've managed to trace this back to the ARM implementation of memset, which is called from copy_from_user in case of a fault and which does #define memset(p,v,n) \ ({ \ void *__p = (p); size_t __n = n; \ if ((__n) != 0) { \ if (__builtin_constant_p((v)) && (v) == 0) \ __memzero((__p),(__n)); \ else \ memset((__p),(v),(__n)); \ } \ (__p); \ }) Apparently gcc gets confused by the check for "size != 0" and believes that the size might be zero when it gets to the line that does "if (s[count-1] == '\n')", so it would access data outside of the array. gcc is clearly wrong here, since this condition was already checked earlier in the function and the 'size' value can not change in the meantime. Fortunately, we can work around it and get rid of the warning by rearranging the function to check for zero size after doing the copy_from_user. It is still safe to pass a zero size into copy_from_user, so it does not cause any side effects. Signed-off-by: -
Mike Frysinger authored
Line wrap the content to 80 cols, and add more details to various fields to match the code. Drop reference to a website that does not exist anymore. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Mike Frysinger authored
The current code places a 256 byte limit on the registration format. This ends up being fairly limited when you try to do matching against a binary format like ELF: - the magic & mask formats cannot have any embedded NUL chars (string_unescape_inplace halts at the first NUL) - each escape sequence quadruples the size: \x00 is needed for NUL - trying to match bytes at the start of the file as well as further on leads to a lot of \x00 sequences in the mask - magic & mask have to be the same length (when decoded) - still need bytes for the other fields - impossible! Let's look at a concrete (and common) example: using QEMU to run MIPS ELFs. The name field uses 11 bytes "qemu-mipsel". The interp uses 20 bytes "/usr/bin/qemu-mipsel". The type & flags takes up 4 bytes. We need 7 bytes for the delimiter (usually ":"). We can skip offset. So already we're down to 107 bytes to use with the magic/mask instead of the real limit of 128 (BINPRM_BUF_SIZE). If people use shell code to register (which they do the majority of the time), they're down to ~26 possible bytes since the escape sequence must be \x##. The ELF format looks like (both 32 & 64 bit): e_ident: 16 bytes e_type: 2 bytes e_machine: 2 bytes Those 20 bytes are enough for most architectures because they have so few formats in the first place, thus they can be uniquely identified. That also means for shell users, since 20 is smaller than 26, they can sanely register a handler. But for some targets (like MIPS), we need to poke further. The ELF fields continue on: e_entry: 4 or 8 bytes e_phoff: 4 or 8 bytes e_shoff: 4 or 8 bytes e_flags: 4 bytes We only care about e_flags here as that includes the bits to identify whether the ELF is O32/N32/N64. But now we have to consume another 16 bytes (for 32 bit ELFs) or 28 bytes (for 64 bit ELFs) just to match the flags. If every byte is escaped, we send 288 more bytes to the kernel ((20 {e_ident,e_type,e_machine} + 12 {e_entry,e_phoff,e_shoff} + 4 {e_flags}) * 2 {mask,magic} * 4 {escape}) and we've clearly blown our budget. Even if we try to be clever and do the decoding ourselves (rather than relying on the kernel to process \x##), we still can't hit the mark -- string_unescape_inplace treats mask & magic as C strings so NUL cannot be embedded. That leaves us with having to pass \x00 for the 12/24 entry/phoff/shoff bytes (as those will be completely random addresses), and that is a minimum requirement of 48/96 bytes for the mask alone. Add up the rest and we blow through it (this is for 64 bit ELFs): magic: 20 {e_ident,e_type,e_machine} + 24 {e_entry,e_phoff,e_shoff} + 4 {e_flags} = 48 # ^^ See note below. mask: 20 {e_ident,e_type,e_machine} + 96 {e_entry,e_phoff,e_shoff} + 4 {e_flags} = 120 Remember above we had 107 left over, and now we're at 168. This is of course the *best* case scenario -- you'll also want to have NUL bytes in the magic & mask too to match literal zeros. Note: the reason we can use 24 in the magic is that we can work off of the fact that for bytes the mask would clobber, we can stuff any value into magic that we want. So when mask is \x00, we don't need the magic to also be \x00, it can be an unescaped raw byte like '!'. This lets us handle more formats (barely) under the current 256 limit, but that's a pretty tall hoop to force people to jump through. With all that said, let's bump the limit from 256 bytes to 1920. This way we support escaping every byte of the mask & magic field (which is 1024 bytes by themselves -- 128 * 4 * 2), and we leave plenty of room for other fields. Like long paths to the interpreter (when you have source in your /really/long/homedir/qemu/foo). Since the current code stuffs more than one structure into the same buffer, we leave a bit of space to easily round up to 2k. 1920 is just as arbitrary as 256 ;). Signed-off-by: -
Joe Perches authored
Warn on probable misuses of logging functions with KERN_<LEVEL> like pr_err(KERN_ERR "foo\n"); Signed-off-by:
Joe Perches <joe@perches.com> Suggested-by:
-
Joe Perches authored
Add an exception to the return before else warning when the line following it is also a return like: if (foo) return bar; else return baz; This form of a test then return is at least as readable as if (foo) return bar; return baz; so don't emit a warning on the first form. Signed-off-by:
Al Viro <viro@ZenIV.linux.org.uk> Cc: Elshad Mustafayev <elshadimo@gmail.com> Signed-off-by:
-
Kees Cook authored
Check for misspellings, based on Debian's lintian list. Several false positives were removed, and several additional words added that were common in the kernel: backword backwords invalide valide recieves singed unsinged While going back and fixing existing spelling mistakes isn't a high priority, it'd be nice to try to catch them before they hit the tree. In the 13830 commits between 3.15 and 3.16, the script would have noticed 560 spelling mistakes. The top 25 are shown here: $ git log --pretty=oneline v3.15..v3.16 | wc -l 13830 $ git log --format='%H' v3.15..v3.16 | \ while read commit ; do \ echo "commit $commit" ; \ git log --format=email --stat -p -1 $commit | \ ./scripts/checkpatch.pl --types=typo_spelling --no-summary - ; \ done | tee spell_v3.15..v3.16.txt | grep "may be misspelled" | \ awk '{print $2}' | tr A-Z a-z | sort | uniq -c | sort -rn 21 'seperate' 17 'endianess' 15 'sucess' 13 'noticable' 11 'occured' 11 'accomodate' 10 'interrup' 9 'prefered' 8 'unecessary' 8 'explicitely' 7 'supress' 7 'overriden' 7 'immediatly' 7 'funtion' 7 'defult' 7 'childs' 6 'succesful' 6 'splitted' 6 'specifc' 6 'reseting' 6 'recieve' 6 'changable' 5 'tmis' 5 'singed' 5 'preceeding' Thanks to Joe Perches for rewrites, suggestions, additional misspelling entries, and testing. Signed-off-by:Kees Cook <keescook@chromium.org> Acked-by:
-
Joe Perches authored
Macros with flow control statements (goto and return) are not very nice to read as any flow movement is unexpected. Try to highlight them and emit a warning on their definition. Avoid warning on macros that use argument concatenation as those macros commonly create another function where the concatenation is used in the function name definition like: #define FOO_FUNC(name, rtn_type) \ rtn_type func##name(arg1, ...) \ { \ rtn_type rtn; \ [code...] \ return rtn; \ } Signed-off-by: -
Joe Perches authored
There's a useless "+" use that needs to be removed as perl 5.20 emits a "Useless use of greediness modifier '+'" message each time it's hit. Signed-off-by:
Greg KH <gregkh@linuxfoundation.org> Signed-off-by:
-
Joe Perches authored
Using a space between concatenated string elements is easier for a human to read. ie: "String"FOO"bar" is easier to read as: "String" FOO "bar" So suggest this style with a --strict command line option. Signed-off-by:
-
Vadim Bendebury authored
This script is used by many other projects, and in some of them the requirement of at least 4 line long description for all Kconfig items is excessive. This patch adds a command line option to control the required minimum length. Tested running this script over a patch including a two line config description. The script generated a warning when invoked as is, and did not generate it when invoked with --min-conf-desc-length=2. Signed-off-by:
Vadim Bendebury <vbendeb@chromium.org> Acked-by:
-
Geert Uytterhoeven authored
When run on *.dtsi or *.dts files, the whitespace checks were skipped, while they are valid for DTS files. Hence stop skipping them. I ran checkpatch on all in-tree DTS files, and didn't notice any error or warning messages that are inappropriate for DTS files. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
-
