- 30 Dec, 2021 10 commits
-
-
Kiran Patil authored
Add support to enable flow-director filter when multiple TCs are configured. Flow director filter can be configured using ethtool (--config-ntuple option). When multiple TCs are configured, each TC is mapped to an unique HW VSI. So VSI corresponding to queue used in filter is identified and flow director context is updated with correct VSI while configuring ntuple filter in HW. Signed-off-by:
Kiran Patil <kiran.patil@intel.com> Signed-off-by:
Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by:
Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by:
Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-David S. Miller authored
queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-12-29 Ruud Bos says: The igb driver provides support for PEROUT and EXTTS pin functions that allow adapter external use of timing signals. At Hottinger Bruel & Kjaer we are using the PEROUT function to feed a PTP corrected 1pps signal into an FPGA as cross system synchronized time source. Support for the PEROUT and EXTTS SDP functions is currently limited to i210/i211 based adapters. This patch series enables these functions also for 82580/i354/i350 based ones. Because the time registers of these adapters do not have the nice split in second rollovers as the i210 has, the implementation is slightly more complex compared to the i210 implementation. The PEROUT function has been successfully tested on an i350 based ethernet adapter. Using the following user space code excerpt, the driver outputs a PTP corrected 1pps signal on the SDP0 pin of an i350: struct ptp_pin_desc desc; memset(&desc, 0, sizeof(desc)); desc.index = 0; desc.func = PTP_PF_PEROUT; desc.chan = 0; if (ioctl(fd, PTP_PIN_SETFUNC, &desc) == 0) { struct timespec ts; if (clock_gettime(clkid, &ts) == 0) { struct ptp_perout_request rq; memset(&rq, 0, sizeof(rq)); rq.index = 0; rq.start.sec = ts.tv_sec + 1; rq.start.nsec = 500000000; rq.period.sec = 1; rq.period.nsec = 0; if (ioctl(fd, PTP_PEROUT_REQUEST, &rq) == 0) { /* 1pps signal is now available on SDP0 */ } } } The added EXTTS function has not been tested. However, looking at the data sheets, the layout of the registers involved match the i210 exactly except for the time registers mentioned before. Hence the almost identical implementation. --- Note: I made changes to fix RCT and checkpatch messages regarding unnecessary parenthesis. ==================== Acked-by:Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
David S. Miller authored
Yevhen Orlov says: ==================== prestera: add basic router driver support Add initial router support for Marvell Prestera driver. Subscribe on inetaddr notifications. TRAP packets, that has to be routed (if packet has router's destination MAC address). Add features: - Support ip address adding on port. e.g.: "ip address add PORT 1.1.1.1/24" Limitations: - Only regular port supported. Vlan will be added soon. - It is routing through CPU. Offloading will be added in next patches. Co-developed-by:
Taras Chornyi <tchornyi@marvell.com> Signed-off-by:
Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by:
Yevhen Orlov <yevhen.orlov@plvision.eu> Changes for v2: * Remove useless assignment ==================== Signed-off-by:
-
Yevhen Orlov authored
Add inetaddr notifiers to support add/del IPv4 address on switchdev port. We create TRAP on first address, added on port and delete TRAP, when last address removed. Currently, driver supports only regular port to became routed. Other port type support will be added later Co-developed-by:
-
Yevhen Orlov authored
Initial implementation of notification handlers. For now this is just stub. So that we can move forward and add prestera_router_hw's objects manipulations. We support several addresses on interface. We just have nothing to do for second address, because rif is already enabled on this interface, after first one. Co-developed-by:
-
Yevhen Orlov authored
Add prestera_router_hw.c. This file contains functions, which track HW objects relations and links. This include implicity creation of objects, that needed by requested one and implicity removing of objects, which reference counter is became zero. We need this layer, because kernel callbacks not always mapped to creation of single HW object. So let it be two different layers - one for subscribing and parsing kernel structures, and another (prestera_router_hw.c) for HW objects relations tracking. There is two types of objects on router_hw layer: - Explicit objects (rif_entry) : created by higher layer. - Implicit objects (vr) : created on demand by explicit objects. Co-developed-by:
-
Yevhen Orlov authored
Add prestera_router.c, which contains code to subscribe/unsubscribe on kernel notifiers for router. This handle kernel notifications, parse structures to make key to manipulate prestera_router_hw's objects. Also prestera_router is container for router's objects database. Co-developed-by:
-
Yevhen Orlov authored
Add functions to enable routing on port, which is not in vlan. Also we can enable routing on vlan. prestera_hw_rif_create() take index of allocated virtual router. Co-developed-by:
-
Yevhen Orlov authored
Add functions and structures to allocate virtual router. prestera_hw_vr_create() return index of allocated VR so that we can move forward and also add another objects (e.g. router interface), which has link to VR. Co-developed-by:
-
Conley Lee authored
Thanks for your review. Here is the new version for this patch. This patch adds support for the emac rx dma present on sun4i. The emac is able to move packets from rx fifo to RAM by using dma. Change since v4. - rename sbk field to skb - rename alloc_emac_dma_req to emac_alloc_dma_req - using kzalloc(..., GPF_ATOMIC) in interrupt context to avoid sleeping - retry by using emac_inblk_32bit when emac_dma_inblk_32bit fails - fix some code style issues Change since v5. - fix some code style issue Signed-off-by:Conley Lee <conleylee@foxmail.com> Link: https://lore.kernel.org/r/tencent_DE05ADA53D5B084D4605BE6CB11E49EF7408@qq.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 29 Dec, 2021 11 commits
-
-
Jakub Kicinski authored
Merge tag 'for-net-next-2021-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add support for Foxconn MT7922A - Add support for Realtek RTL8852AE - Rework HCI event handling to use skb_pull_data * tag 'for-net-next-2021-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (62 commits) Bluetooth: MGMT: Fix spelling mistake "simultanous" -> "simultaneous" Bluetooth: vhci: Set HCI_QUIRK_VALID_LE_STATES Bluetooth: MGMT: Fix LE simultaneous roles UUID if not supported Bluetooth: hci_sync: Add check simultaneous roles support Bluetooth: hci_sync: Wait for proper events when connecting LE Bluetooth: hci_sync: Add support for waiting specific LE subevents Bluetooth: hci_sync: Add hci_le_create_conn_sync Bluetooth: hci_event: Use skb_pull_data when processing inquiry results Bluetooth: hci_sync: Push sync command cancellation to workqueue Bluetooth: hci_qca: Stop IBS timer during BT OFF Bluetooth: btusb: Add support for Foxconn MT7922A Bluetooth: btintel: Add missing quirks and msft ext for legacy bootloader Bluetooth: btusb: Add two more Bluetooth parts for WCN6855 Bluetooth: L2CAP: Fix using wrong mode Bluetooth: hci_sync: Fix not always pausing advertising when necessary Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_CONNECTED Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_FOUND Bluetooth: mgmt: Introduce mgmt_alloc_skb and mgmt_send_event_skb Bluetooth: btusb: Return error code when getting patch status failed Bluetooth: btusb: Handle download_firmware failure cases ... ==================== Link: https://lore.kernel.org/r/20211229211258.2290966-1-luiz.dentz@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Hangbin Liu says: ==================== net: define new hwtstamp flag and return it to userspace This patchset defined the new hwtstamp flag HWTSTAMP_FLAG_BONDED_PHC_INDEX to make userspace program build pass with old kernel header by settting ifdef. Let's also return the flag when do SIOC[G/S]HWTSTAMP to let userspace know that it's necessary for a given netdev. ==================== Link: https://lore.kernel.org/r/20211229080938.231324-1-liuhangbin@gmail.comSigned-off-by:
-
Hangbin Liu authored
If the userspace program is distributed in binary form (distro package), there is no way to know on which kernel versions it will run. Let's only check if the flag was set when do SIOCSHWTSTAMP. And return hwtstamp_config with flag HWTSTAMP_FLAG_BONDED_PHC_INDEX to notify userspace whether the new feature is supported or not. Suggested-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
-
Hangbin Liu authored
As we defined the new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX as enum, it's not easy for userspace program to check if the flag is supported when build. Let's define the new flag so user space could build it on old kernel with ifdef check. Fixes: 9c9211a3 ("net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEX") Signed-off-by:
-
Ruud Bos authored
Support for the PTP pin function on 82580/i354/i350 based adapters. Because the time registers of these adapters do not have the nice split in second rollovers as the i210 has, the implementation is slightly more complex compared to the i210 implementation. Signed-off-by:
Ruud Bos <kernel.hbk@gmail.com> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Signed-off-by:
-
Ruud Bos authored
Support for the PEROUT PTP pin function on 82580/i354/i350 based adapters. Because the time registers of these adapters do not have the nice split in second rollovers as the i210 has, the implementation is slightly more complex compared to the i210 implementation. Signed-off-by:
-
Ruud Bos authored
Remove code duplication in the tsync interrupt handler function by moving this logic to separate functions. This keeps the interrupt handler readable and allows the new functions to be extended for adapter types other than i210. Signed-off-by:
-
Ruud Bos authored
Allow reuse of SDP config struct initialization by moving it to a separate function. Signed-off-by:
-
Rafał Miłecki authored
Some NVMEM devices have text based cells. In such cases MAC is stored in a XX:XX:XX:XX:XX:XX format. Use mac_pton() to parse such data and support those NVMEM cells. This is required to support e.g. a very popular U-Boot and its environment variables. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== 10GbE Intel Wired LAN Driver Updates 2021-12-28 Alexander Lobakin says: napi_build_skb() I introduced earlier this year ([0]) aims to decrease MM pressure and the overhead from in-place kmem_cache_alloc() on each Rx entry processing by decaching skbuff_heads from NAPI per-cpu cache filled prior to that by napi_consume_skb() (so it is sort of a direct shortcut for free -> mm -> alloc cycle). Currently, no in-tree drivers use it. Switch all Intel Ethernet drivers to it to get slight-to-medium perf boosts depending on the frame size. ice driver, 50 Gbps link, pktgen + XDP_PASS (local in) sample: frame_size/nthreads 64/42 128/20 256/8 512/4 1024/2 1532/1 net-next (Kpps) 46062 34654 18248 9830 5343 2714 series 47438 34708 18330 9875 5435 2777 increase 2.9% 0.15% 0.45% 0.46% 1.72% 2.32% Additionally, e1000's been switched to napi_consume_skb() as it's safe and works fine there, and there's no point in napi_build_skb() without paired NAPI cache feeding point. [0] https://lore.kernel.org/all/20210213141021.87840-1-alobakin@pm.me * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ixgbevf: switch to napi_build_skb() ixgbe: switch to napi_build_skb() igc: switch to napi_build_skb() igb: switch to napi_build_skb() ice: switch to napi_build_skb() iavf: switch to napi_build_skb() i40e: switch to napi_build_skb() e1000: switch to napi_build_skb() e1000: switch to napi_consume_skb() ==================== Link: https://lore.kernel.org/r/20211228175815.281449-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Aleksander Jan Bajkowski authored
This patch adds a missing line after the declaration and fixes the checkpatch warning: WARNING: Missing a blank line after declarations + int desc; + for (desc = 0; desc < LTQ_DESC_NUM; desc++) Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Link: https://lore.kernel.org/r/20211228220031.71576-1-olek2@wp.plSigned-off-by:
-
- 28 Dec, 2021 12 commits
-
-
Aleksander Jan Bajkowski authored
This patch adds the missing code comment for memory barrier call and fixes checkpatch warning: WARNING: memory barrier without comment + wmb(); Signed-off-by:
-
Thomas Gleixner authored
Since referenced change pci_irq_vector() can't be used in atomic context any longer. This conflicts with our usage of this function in rtl8169_netpoll(). Therefore store the interrupt number in struct rtl8169_private. Fixes: 495c66ac ("genirq/msi: Convert to new functions") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/3cd24763-f307-78f5-76ed-a5fbf315fb28@gmail.comSigned-off-by:
-
Alexander Lobakin authored
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. ixgbevf driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by:
Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
-
Alexander Lobakin authored
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. ixgbe driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by:
-
Alexander Lobakin authored
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. igc driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by:
Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by:
-
Alexander Lobakin authored
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. igb driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by:
-
Alexander Lobakin authored
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. ice driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by:
-
Alexander Lobakin authored
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. iavf driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by:
-
Alexander Lobakin authored
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. i40e driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by:
-
Alexander Lobakin authored
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx element. e1000 driver runs Tx completion polling cycle right before the Rx one. Now that e1000 uses napi_consume_skb() to put skbuff_heads of completed entries into the cache, it will never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx and increase throughput. Signed-off-by:
Tony Brelinski <tony.brelinski@intel.com> Signed-off-by:
-
Alexander Lobakin authored
In order to take the best from per-cpu NAPI skbuff_head caches and CPU cycles, let's switch from dev_kfree_skb_any(), which passes skb back to the mm layer, to napi_consume_skb(), which feeds those caches on non-zero budget instead (falls back to the former on 0). Do the replacement in e1000_unmap_and_free_tx_resource(). There are 4 call sites of this function throughout the driver: * e1000_clean_tx_ring(). Slowpath, process context, cleans the whole Tx ring on ifdown. Use budget of 0 here; * e1000_tx_map(). Hotpath, net Tx softirq, unmaps the buffers in case of error. Use 0 as well; * e1000_clean_tx_irq(). Hotpath, NAPI Tx completion polling cycle. As the driver doesn't count completed Tx entries towards the NAPI budget, just use the poll budget of 64 to utilize caches. Apart from being a preparation for switching to napi_build_skb(), this is useful on its own as well, as napi_consume_skb() flushes skb caches by batches of 32 instead of one-at-a-time. Signed-off-by:
-
Colin Ian King authored
Variable expectlen is being assigned a value that is never read, the assignment occurs before a return statement. The assignment is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
- 27 Dec, 2021 7 commits
-
-
Wen Zhiwei authored
Delete the initialization of three static variables because it is meaningless. Signed-off-by:
Wen Zhiwei <wenzhiwei@kylinos.cn> Signed-off-by:
-
Remi Pommarel authored
In compat mode SIOC{G,S}IFBR ioctls were only supporting BRCTL_GET_VERSION returning an artificially version to spur userland tool to use SIOCDEVPRIVATE instead. But some userland tools ignore that and use SIOC{G,S}IFBR unconditionally as seen with busybox's brctl. Example of non working 32-bit brctl with CONFIG_COMPAT=y: $ brctl show brctl: SIOCGIFBR: Invalid argument Example of fixed 32-bit brctl with CONFIG_COMPAT=y: $ brctl show bridge name bridge id STP enabled interfaces br0 Signed-off-by:Remi Pommarel <repk@triplefau.lt> Co-developed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq() for DT users only. While at it propagate error code in case request_irq() fails instead of returning -EBUSY. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). While doing so return error pointer from read_dts_node() as platform_get_irq() may return -EPROBE_DEFER. Signed-off-by:
-
Lad Prabhakar authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
-
