Don't duplicate worthless lines.
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1389/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Although all EMMAxxx SoCs can support IP2 and IP3 hardware interrupts,
current EMMA2RH plat_irq_dispatch() supports IP2 only.  We can make it
configurable in the future, but for the time being, would like to make
things explicitly allcated to IP2 in accordance with plat_irq_dispatch().
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1388/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

For historical reasons, we used to put MIPS CPU IRQs behind SoC-specific
IRQs in the queue, and have been using CPU_IRQ_BASE as MIPS_CPU_IRQ_BASE.
In recent years, however, we've brought it back to normal order, and now
CPU_IRQ_BASE just redefines the generic MIPS_CPU_IRQ_BASE.

At the same time, NUM_CPU_IRQ is also removed as useless.
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1387/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

OCTEON implements __builtin_popcount with a single instruction, so lets use it.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: David Daney <ddaney@caviumnetworks.com>
Patchwork: https://patchwork.linux-mips.org/patch/1431/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Some MIPS ISA processor varients can do hweight operations
efficiently.

Split arch_hweight.h into a seperate file, and implement the
operations with __builtin_popcount{,ll} if supported.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: David Daney <ddaney@caviumnetworks.com>
Patchwork: https://patchwork.linux-mips.org/patch/1430/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Shamelessly stealing wisdom from pasemi_mac.c, I found char2hex() could
be replaced with a single call to sscanf(), looks cleaner to me at
least.  The result is 100 bytes trimmed off the size of a compiled
cpmac_get_mac() and as an extra bonus it grumbles and gracefully fails
over to using random_ether_addr() when an attempt to parse an invalid
MAC address is made.
Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
To: linux-mips@linux-mips.org
Cc: florian@openwrt.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Additional changes to Youichi Yuasa's command line simplication code

The PowerTV platform uses a non-standard way to get the kernel command
line--we insert a built-in command line into arcs_cmdline and to
get additional command line information from the bootloader via a
pointer in the a1 register. It is necessary to insert a space between
to the two strings or the last argument from arcs_cmdline and the first
argument from the bootloader may be inadvertantly combined.

It is also necessary to set CONFIG_CMDLINE_BOOL to "y" and to set the
default command line to an empty string to get the simplified code to
work properly in the PowerTV environment.
Signed-off-by: David VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1438/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

CONFIG_MTD_PMC_MSP_RAMROOT doesn't exist in Kconfig, therefore removing all
references for it from the source code.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
To:     Ralf Baechle <ralf@linux-mips.org>,
        Yoichi Yuasa <yuasa@linux-mips.org>, linux-mips@linux-mips.org,
        linux-kernel@vger.kernel.org
Cc:     vamos@i4.informatik.uni-erlangen.de
Acked-by: Shane McDonald <mcdonald.shane@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1375/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

CONFIG_DIAGNOSTICS doesn't exist in Kconfig, therefore removing all
references for it from the source code.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
To: David VomLehn <dvomlehn@cisco.com>
To: Yoichi Yuasa <yuasa@linux-mips.org>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Cc: vamos@i4.informatik.uni-erlangen.de
Patchwork: https://patchwork.linux-mips.org/patch/1374/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

CONFIG_PMCTWILED doesn't exist in Kconfig, therefore removing all
references for it from the source code.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Cc: vamos@i4.informatik.uni-erlangen.de
Acked-by: Shane McDonald <mcdonald.shane@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1373/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

CONFIG_MTD_PB1550_BOOT, CONFIG_MTD_PB1550_USER doesn't exist in
Kconfig, therefore removing all references for it from the source
code.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
To: Manuel Lauss <manuel.lauss@gmail.com>,
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Cc: vamos@i4.informatik.uni-erlangen.de
Patchwork: https://patchwork.linux-mips.org/patch/1370/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

CONFIG_GDB_CONSOLE doesn't exist in Kconfig, therefore removing all
references for it from the source code.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
To: David Daney <ddaney@caviumnetworks.com>
To: Yang Shi <yang.shi@windriver.com>
To: Herbert Xu <herbert@gondor.apana.org.au>
To: Tejun Heo <tj@kernel.org>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Cc: vamos@i4.informatik.uni-erlangen.de
Patchwork: https://patchwork.linux-mips.org/patch/1368/Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

CONFIG_SOC_AU1000_FREQUENCY doesn't exist in Kconfig, therefore
removing all references for it from the source code.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Cc: vamos@i4.informatik.uni-erlangen.de
Patchwork: https://patchwork.linux-mips.org/patch/1367/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: https://patchwork.linux-mips.org/patch/1504/

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

When a secondary CPU is being brought up, it is not uncommon for
printk() to be invoked when cpu_online(smp_processor_id()) == 0.  The
case that I witnessed personally was on MIPS:

http://lkml.org/lkml/2010/5/30/4

If (can_use_console() == 0), printk() will spool its output to log_buf
and it will be visible in "dmesg", but that output will NOT be echoed to
the console until somebody calls release_console_sem() from a CPU that
is online.  Therefore, the boot time messages from the new CPU can get
stuck in "limbo" for a long time, and might suddenly appear on the
screen when a completely unrelated event (e.g. "eth0: link is down")
occurs.

This patch modifies the console code so that any pending messages are
automatically flushed out to the console whenever a CPU hotplug
operation completes successfully or aborts.

The issue was seen on 2.6.34.

Original patch by Kevin Cernekee with cleanups by akpm and additional fixes
by Santosh Shilimkar.  This patch superseeds
https://patchwork.linux-mips.org/patch/1357/.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
To: <mingo@elte.hu>
To: <akpm@linux-foundation.org>
To: <simon.kagstrom@netinsight.net>
To: <David.Woodhouse@intel.com>
To: <lethal@linux-sh.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: <linux-mips@linux-mips.org>
Reviewed-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1534/
LKML-Reference: <ede63b5a20af951c755736f035d1e787772d7c28@localhost>
LKML-Reference: <EAF47CD23C76F840A9E7FCE10091EFAB02C5DB6D1F@dbde02.ent.ti.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

- Drop CLEAN_FILES assignments that is no longer required
- Add $(Q) in a few rules
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips <linux-mips@linux-mips.org>
To: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1305/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

- use hostprogs-y for the elf2ecoff
- list all *.o file in targets
- renamed obj-y to vmlinuzobjs-y (it was confusing to re-use a kbuild variable)
- fix all uses of if_changed/cmd
- use kbuild rules to beautify output
- update clean-file to clean vmlinuz.* in top-level directory

- simplied logic in arch/mips/Makefile for compressed targets

The net result is a more kbuild conformant Makefile but
readability did not increase.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips <linux-mips@linux-mips.org>
To: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1304/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

- remove stuff that is not needed
  VMLINUX assignment, all: rule
- use hostprogs-y for the host program
- use kbuild rules for the three targets - to beautify output
- drop clean-files - it is no longer needed
- simplify arch/mips/Makefile when calling targets in boot/Makefile
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips <linux-mips@linux-mips.org>
To: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1303/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Preparatory cleanup for moving Alchemy over to new  MIPS Platform build
system support.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Preparatory cleanup for moving Alchemy over to new  MIPS Platform build
system support.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

It was sharing the nxp directory but no code with pnx833x and will fit
better into the new platform makefile scheme, if moved.  Also after the
pnx833x code has been moved up, the pnx8550 Code was the last users of
the nxp dir.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

It was sharing the nxp directory but no code with pnx8550 and will fit
better into the new platform makefile scheme, if moved.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

It was the last platform under gt64120 and will fit better into the new
platform makefile scheme, if moved.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>