Pull Linux Kernel Memory Model updates from Paul McKenney
 "This improves LKMM diagnostic messages, unifies handling of the
  ordering produced by unlock/lock pairs, adds support for the
  smp_mb__after_srcu_read_unlock() macro, removes redundant members from
  the to-r relation, brings SRCU read-side semantics into alignment with
  Linux-kernel SRCU, makes ppo a subrelation of po, and improves
  documentation"

* tag 'lkmm.2023.04.07a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  Documentation: litmus-tests: Correct spelling
  tools/memory-model: Add documentation about SRCU read-side critical sections
  tools/memory-model: Make ppo a subrelation of po
  tools/memory-model: Provide exact SRCU semantics
  tools/memory-model: Restrict to-r to read-read address dependency
  tools/memory-model: Add smp_mb__after_srcu_read_unlock()
  tools/memory-model: Unify UNLOCK+LOCK pairings to po-unlock-lock-po
  tools/memory-model: Update some warning labels

Pull KCSAN updates from Paul McKenney:
 "Kernel concurrency sanitizer (KCSAN) updates for v6.4

  This fixes kernel-doc warnings and also updates instrumentation from
  READ_ONCE() to volatile in order to avoid unaligned load-acquire
  instructions on arm64 in kernels built with LTO"

* tag 'kcsan.2023.04.04a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  kcsan: Avoid READ_ONCE() in read_instrumented_memory()
  instrumented.h: Fix all kernel-doc format warnings

Pull tpm updates from Jarkko Sakkinen:

 - The .machine keyring, used for Machine Owner Keys (MOK), acquired the
   ability to store only CA enforced keys, and put rest to the .platform
   keyring, thus separating the code signing keys from the keys that are
   used to sign certificates.

   This essentially unlocks the use of the .machine keyring as a trust
   anchor for IMA. It is an opt-in feature, meaning that the additional
   contraints won't brick anyone who does not care about them.

 - Enable interrupt based transactions with discrete TPM chips (tpm_tis).

   There was code for this existing but it never really worked so I
   consider this a new feature rather than a bug fix. Before the driver
   just fell back to the polling mode.

Link: https://lore.kernel.org/linux-integrity/a93b6222-edda-d43c-f010-a59701f2aeef@gmx.de/
Link: https://lore.kernel.org/linux-integrity/20230302164652.83571-1-eric.snowberg@oracle.com/

* tag 'tpmdd-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: (29 commits)
  tpm: Add !tpm_amd_is_rng_defective() to the hwrng_unregister() call site
  tpm_tis: fix stall after iowrite*()s
  tpm/tpm_tis_synquacer: Convert to platform remove callback returning void
  tpm/tpm_tis: Convert to platform remove callback returning void
  tpm/tpm_ftpm_tee: Convert to platform remove callback returning void
  tpm: tpm_tis_spi: Mark ACPI and OF related data as maybe unused
  tpm: st33zp24: Mark ACPI and OF related data as maybe unused
  tpm, tpm_tis: Enable interrupt test
  tpm, tpm_tis: startup chip before testing for interrupts
  tpm, tpm_tis: Claim locality when interrupts are reenabled on resume
  tpm, tpm_tis: Claim locality in interrupt handler
  tpm, tpm_tis: Request threaded interrupt handler
  tpm, tpm: Implement usage counter for locality
  tpm, tpm_tis: do not check for the active locality in interrupt handler
  tpm, tpm_tis: Move interrupt mask checks into own function
  tpm, tpm_tis: Only handle supported interrupts
  tpm, tpm_tis: Claim locality before writing interrupt registers
  tpm, tpm_tis: Do not skip reset of original interrupt vector
  tpm, tpm_tis: Disable interrupts if tpm_tis_probe_irq() failed
  tpm, tpm_tis: Claim locality before writing TPM_INT_ENABLE register
  ...

Pull smack updates from Casey Schaufler:
 "There are two changes, one small and one more substantial:

   - Remove of an unnecessary cast

   - The mount option processing introduced with the mount rework makes
     copies of mount option values. There is no good reason to make
     copies of Smack labels, as they are maintained on a list and never
     removed.

     The code now uses pointers to entries on the list, reducing
     processing time and memory use"

* tag 'Smack-for-6.4' of https://github.com/cschaufler/smack-next:
  Smack: Improve mount process memory use
  smack_lsm: remove unnecessary type casting

Pull landlock update from Mickaël Salaün:
 "Improve user space documentation"

* tag 'landlock-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Clarify documentation for the LANDLOCK_ACCESS_FS_REFER right

Pull tomoyo update from Tetsuo Handa:
 "One cleanup patch from Vlastimil Babka"

* tag 'tomoyo-pr-20230424' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
  tomoyo: replace tomoyo_round2() with kmalloc_size_roundup()

Pull lsm updates from Paul Moore:

 - Move the LSM hook comment blocks into security/security.c

   For many years the LSM hook comment blocks were located in a very odd
   place, include/linux/lsm_hooks.h, where they lived on their own,
   disconnected from both the function prototypes and definitions.

   In keeping with current kernel conventions, this moves all of these
   comment blocks to the top of the function definitions, transforming
   them into the kdoc format in the process. This should make it much
   easier to maintain these comments, which are the main source of LSM
   hook documentation.

   For the most part the comment contents were left as-is, although some
   glaring errors were corrected. Expect additional edits in the future
   as we slowly update and correct the comment blocks.

   This is the bulk of the diffstat.

 - Introduce LSM_ORDER_LAST

   Similar to how LSM_ORDER_FIRST is used to specify LSMs which should
   be ordered before "normal" LSMs, the LSM_ORDER_LAST is used to
   specify LSMs which should be ordered after "normal" LSMs.

   This is one of the prerequisites for transitioning IMA/EVM to a
   proper LSM.

 - Remove the security_old_inode_init_security() hook

   The security_old_inode_init_security() LSM hook only allows for a
   single xattr which is problematic both for LSM stacking and the
   IMA/EVM-as-a-LSM effort. This finishes the conversion over to the
   security_inode_init_security() hook and removes the single-xattr LSM
   hook.

 - Fix a reiserfs problem with security xattrs

   During the security_old_inode_init_security() removal work it became
   clear that reiserfs wasn't handling security xattrs properly so we
   fixed it.

* tag 'lsm-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (32 commits)
  reiserfs: Add security prefix to xattr name in reiserfs_security_write()
  security: Remove security_old_inode_init_security()
  ocfs2: Switch to security_inode_init_security()
  reiserfs: Switch to security_inode_init_security()
  security: Remove integrity from the LSM list in Kconfig
  Revert "integrity: double check iint_cache was initialized"
  security: Introduce LSM_ORDER_LAST and set it for the integrity LSM
  device_cgroup: Fix typo in devcgroup_css_alloc description
  lsm: fix a badly named parameter in security_get_getsecurity()
  lsm: fix doc warnings in the LSM hook comments
  lsm: styling fixes to security/security.c
  lsm: move the remaining LSM hook comments to security/security.c
  lsm: move the io_uring hook comments to security/security.c
  lsm: move the perf hook comments to security/security.c
  lsm: move the bpf hook comments to security/security.c
  lsm: move the audit hook comments to security/security.c
  lsm: move the binder hook comments to security/security.c
  lsm: move the sysv hook comments to security/security.c
  lsm: move the key hook comments to security/security.c
  lsm: move the xfrm hook comments to security/security.c
  ...

Pull selinux updates from Paul Moore:

 - Stop passing the 'selinux_state' pointers as function arguments

   As discussed during the end of the last development cycle, passing a
   selinux_state pointer through the SELinux code has a noticeable
   impact on performance, and with the current code it is not strictly
   necessary.

   This simplifies things by referring directly to the single
   selinux_state global variable which should help improve SELinux
   performance.

 - Uninline the unlikely portions of avc_has_perm_noaudit()

   This change was also based on a discussion from the last development
   cycle, and is heavily based on an initial proof of concept patch from
   you. The core issue was that avc_has_perm_noaudit() was not able to
   be inlined, as intended, due to its size. We solved this issue by
   extracting the less frequently hit portions of avc_has_perm_noaudit()
   into a separate function, reducing the size of avc_has_perm_noaudit()
   to the point where the compiler began inlining the function. We also
   took the opportunity to clean up some ugly RCU locking in the code
   that became uglier with the change.

 - Remove the runtime disable functionality

   After several years of work by the userspace and distro folks, we are
   finally in a place where we feel comfortable removing the runtime
   disable functionality which we initially deprecated at the start of
   2020.

   There is plenty of information in the kernel's deprecation (now
   removal) notice, but the main motivation was to be able to safely
   mark the LSM hook structures as '__ro_after_init'.

   LWN also wrote a good summary of the deprecation this morning which
   offers a more detailed history:

        https://lwn.net/SubscriberLink/927463/dcfa0d4ed2872f03

 - Remove the checkreqprot functionality

   The original checkreqprot deprecation notice stated that the removal
   would happen no sooner than June 2021, which means this falls hard
   into the "better late than never" bucket.

   The Kconfig and deprecation notice has more detail on this setting,
   but the basic idea is that we want to ensure that the SELinux policy
   allows for the memory protections actually applied by the kernel, and
   not those requested by the process.

   While we haven't found anyone running a supported distro that is
   affected by this deprecation/removal, anyone who is affected would
   only need to update their policy to reflect the reality of their
   applications' mapping protections.

 - Minor Makefile improvements

   Some minor Makefile improvements to correct some dependency issues
   likely only ever seen by SELinux developers. I expect we will have at
   least one more tweak to the Makefile during the next merge window,
   but it didn't quite make the cutoff this time around.

* tag 'selinux-pr-20230420' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: ensure av_permissions.h is built when needed
  selinux: fix Makefile dependencies of flask.h
  selinux: stop returning node from avc_insert()
  selinux: clean up dead code after removing runtime disable
  selinux: update the file list in MAINTAINERS
  selinux: remove the runtime disable functionality
  selinux: remove the 'checkreqprot' functionality
  selinux: stop passing selinux_state pointers and their offspring
  selinux: uninline unlikely parts of avc_has_perm_noaudit()

Merge my x86 user copy updates branch.

This cleans up a lot of our x86 memory copy code, particularly for user
accesses.  I've been pushing for microarchitectural support for good
memory copying and clearing for a long while, and it's been visible in
how the kernel has aggressively used 'rep movs' and 'rep stos' whenever
possible.

And that micro-architectural support has been improving over the years,
to the point where on modern CPU's the best option for a memory copy
that would become a function call (as opposed to being something that
can just be turned into individual 'mov' instructions) is now to inline
the string instruction sequence instead.

However, that only makes sense when we have the modern markers for this:
the x86 FSRM and FSRS capabilities ("Fast Short REP MOVS/STOS").

So this cleans up a lot of our historical code, gets rid of the legacy
marker use ("REP_GOOD" and "ERMS") from the memcpy/memset cases, and
replaces it with that modern reality.  Note that REP_GOOD and ERMS end
up still being used by the known large cases (ie page copyin gand
clearing).

The reason much of this ends up being about user memory accesses is that
the normal in-kernel cases are done by the compiler (__builtin_memcpy()
and __builtin_memset()) and getting to the point where we can use our
instruction rewriting to inline those to be string instructions will
need some compiler support.

In contrast, the user accessor functions are all entirely controlled by
the kernel code, so we can change those arbitrarily.

Thanks to Borislav Petkov for feedback on the series, and Jens testing
some of this on micro-architectures I didn't personally have access to.

* x86-rep-insns:
  x86: rewrite '__copy_user_nocache' function
  x86: remove 'zerorest' argument from __copy_user_nocache()
  x86: set FSRS automatically on AMD CPUs that have FSRM
  x86: improve on the non-rep 'copy_user' function
  x86: improve on the non-rep 'clear_user' function
  x86: inline the 'rep movs' in user copies for the FSRM case
  x86: move stac/clac from user copy routines into callers
  x86: don't use REP_GOOD or ERMS for user memory clearing
  x86: don't use REP_GOOD or ERMS for user memory copies
  x86: don't use REP_GOOD or ERMS for small memory clearing
  x86: don't use REP_GOOD or ERMS for small memory copies

Use the same pattern as the compat version of this code does: instead of
copying the whole array to a kernel buffer and then having a separate
phase of verifying it, just do it one entry at a time, verifying as you
go.

On Jens' /dev/zero readv() test this improves performance by ~6%.

[ This was obviously triggered by Jens' ITER_UBUF updates series ]
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/all/de35d11d-bce7-e976-7372-1f2caf417103@kernel.dk/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ITER_UBUF updates from Jens Axboe:
 "This turns singe vector imports into ITER_UBUF, rather than
  ITER_IOVEC.

  The former is more trivial to iterate and advance, and hence a bit
  more efficient. From some very unscientific testing, ~60% of all iovec
  imports are single vector"

* tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux:
  iov_iter: Mark copy_compat_iovec_from_user() noinline
  iov_iter: import single vector iovecs as ITER_UBUF
  iov_iter: convert import_single_range() to ITER_UBUF
  iov_iter: overlay struct iovec and ubuf/len
  iov_iter: set nr_segs = 1 for ITER_UBUF
  iov_iter: remove iov_iter_iovec()
  iov_iter: add iter_iov_addr() and iter_iov_len() helpers
  ALSA: pcm: check for user backed iterator, not specific iterator type
  IB/qib: check for user backed iterator, not specific iterator type
  IB/hfi1: check for user backed iterator, not specific iterator type
  iov_iter: add iter_iovec() helper
  block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly

Pull ARM development updates from Russell King:
 "Four changes for v6.4:

   - simplify the path to the top vmlinux

   - three patches to fix vfp with instrumentation enabled (eg lockdep)"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9294/2: vfp: Fix broken softirq handling with instrumentation enabled
  ARM: 9293/1: vfp: Pass successful return address via register R3
  ARM: 9292/1: vfp: Pass thread_info pointer to vfp_support_entry
  ARM: 9291/1: decompressor: simplify the path to the top vmlinux

Intel compiler support has already been completely removed in commit
95207db8 ("Remove Intel compiler support").  However, it appears
that there is still some ICC-related code in scripts/cc-version.sh.
There is no harm in leaving the code as it is, but removing the dead
code makes the codebase a bit cleaner.

Hopefully all ICC-related stuff in the build scripts will be removed
after this commit, given the grep output as below:

	(linux/scripts) $ grep -i -w -R 'icc'
	cc-version.sh:ICC)
	cc-version.sh:	min_version=$($min_tool_version icc)
	dtc/include-prefixes/arm64/qcom/sm6350.dtsi:#include <dt-bindings/interconnect/qcom,icc.h>

Fixes: 95207db8 ("Remove Intel compiler support")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The following crash was reported:

[ 1950.279393] list_del corruption, ffff99560d485790->next is NULL
[ 1950.279400] ------------[ cut here ]------------
[ 1950.279401] kernel BUG at lib/list_debug.c:49!
[ 1950.279405] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 1950.279407] CPU: 11 PID: 5886 Comm: modprobe Tainted: G O 6.2.8_1 #1
[ 1950.279409] Hardware name: Gigabyte Technology Co., Ltd. B550M AORUS PRO-P/B550M AORUS PRO-P,
BIOS F15c 05/11/2022
[ 1950.279410] RIP: 0010:__list_del_entry_valid+0x59/0xc0
[ 1950.279415] Code: 48 8b 01 48 39 f8 75 5a 48 8b 72 08 48 39 c6 75 65 b8 01 00 00 00 c3 cc cc cc
cc 48 89 fe 48 c7 c7 08 a8 13 9e e8 b7 0a bc ff <0f> 0b 48 89 fe 48 c7 c7 38 a8 13 9e e8 a6 0a bc
ff 0f 0b 48 89 fe
[ 1950.279416] RSP: 0018:ffffa96d05647e08 EFLAGS: 00010246
[ 1950.279418] RAX: 0000000000000033 RBX: ffff99560d485750 RCX: 0000000000000000
[ 1950.279419] RDX: 0000000000000000 RSI: ffffffff9e107c59 RDI: 00000000ffffffff
[ 1950.279420] RBP: ffffffffc19c5168 R08: 0000000000000000 R09: ffffa96d05647cc8
[ 1950.279421] R10: 0000000000000003 R11: ffffffff9ea2a568 R12: 0000000000000000
[ 1950.279422] R13: ffff99560140a2e0 R14: ffff99560127d2e0 R15: 0000000000000000
[ 1950.279422] FS: 00007f67da795380(0000) GS:ffff995d1f0c0000(0000) knlGS:0000000000000000
[ 1950.279424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1950.279424] CR2: 00007f67da7e65c0 CR3: 00000001feed2000 CR4: 0000000000750ee0
[ 1950.279426] PKRU: 55555554
[ 1950.279426] Call Trace:
[ 1950.279428] <TASK>
[ 1950.279430] hwrng_unregister+0x28/0xe0 [rng_core]
[ 1950.279436] tpm_chip_unregister+0xd5/0xf0 [tpm]

Add the forgotten !tpm_amd_is_rng_defective() invariant to the
hwrng_unregister() call site inside tpm_chip_unregister().

Cc: stable@vger.kernel.org
Reported-by: Martin Dimov <martin@dmarto.com>
Link: https://lore.kernel.org/linux-integrity/3d1d7e9dbfb8c96125bc93b6b58b90a7@dmarto.com/
Fixes: f1324bbc ("tpm: disable hwrng for fTPM on some AMD designs")
Fixes: b006c439 ("hwrng: core - start hwrng kthread also for untrusted sources")
Tested-by: Martin Dimov <martin@dmarto.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

ioread8() operations to TPM MMIO addresses can stall the CPU when
immediately following a sequence of iowrite*()'s to the same region.

For example, cyclitest measures ~400us latency spikes when a non-RT
usermode application communicates with an SPI-based TPM chip (Intel Atom
E3940 system, PREEMPT_RT kernel). The spikes are caused by a
stalling ioread8() operation following a sequence of 30+ iowrite8()s to
the same address. I believe this happens because the write sequence is
buffered (in CPU or somewhere along the bus), and gets flushed on the
first LOAD instruction (ioread*()) that follows.

The enclosed change appears to fix this issue: read the TPM chip's
access register (status code) after every iowrite*() operation to
amortize the cost of flushing data to chip across multiple instructions.
Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
Link: https://lore.kernel.org/r/20230323153436.B2SATnZV@linutronix.deSigned-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

ftpm_tee_remove() returns zero unconditionally (and cannot easily
converted to return void). So ignore the return value to be able to make
ftpm_plat_tee_remove() return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The driver can be compile tested with !CONFIG_OF or !CONFIG_ACPI making
unused:

  drivers/char/tpm/tpm_tis_spi_main.c:234:34: error: ‘of_tis_spi_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The driver can be compile tested with !CONFIG_OF or !CONFIG_ACPI making

  drivers/char/tpm/st33zp24/i2c.c:141:34: error: ‘of_st33zp24_i2c_match’ defined but not used [-Werror=unused-const-variable=]
  drivers/char/tpm/st33zp24/spi.c:258:34: error: ‘of_st33zp24_spi_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The test for interrupts in tpm_tis_send() is skipped if the flag
TPM_CHIP_FLAG_IRQ is not set. Since the current code never sets the flag
initially the test is never executed.

Fix this by setting the flag in tpm_tis_gen_interrupt() right after
interrupts have been enabled and before the test is executed.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

In tpm_tis_gen_interrupt() a request for a property value is sent to the
TPM to test if interrupts are generated. However after a power cycle the
TPM responds with TPM_RC_INITIALIZE which indicates that the TPM is not
yet properly initialized.
Fix this by first starting the TPM up before the request is sent. For this
the startup implementation is removed from tpm_chip_register() and put
into the new function tpm_chip_startup() which is called before the
interrupts are tested.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

In tpm_tis_resume() make sure that the locality has been claimed when
tpm_tis_reenable_interrupts() is called. Otherwise the writings to the
register might not have any effect.

Fixes: 45baa1d1 ("tpm_tis: Re-enable interrupts upon (S3) resume")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Writing the TPM_INT_STATUS register in the interrupt handler to clear the
interrupts only has effect if a locality is held. Since this is not
guaranteed at the time the interrupt is fired, claim the locality
explicitly in the handler.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The TIS interrupt handler at least has to read and write the interrupt
status register. In case of SPI both operations result in a call to
tpm_tis_spi_transfer() which uses the bus_lock_mutex of the spi device
and thus must only be called from a sleepable context.

To ensure this request a threaded interrupt handler.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Implement a usage counter for the (default) locality used by the TPM TIS
driver:
Request the locality from the TPM if it has not been claimed yet, otherwise
only increment the counter. Also release the locality if the counter is 0
otherwise only decrement the counter. Since in case of SPI the register
accesses are locked by means of the SPI bus mutex use a sleepable lock
(i.e. also a mutex) to ensure thread-safety of the counter which may be
accessed by both a userspace thread and the interrupt handler.

By doing this refactor the names of the amended functions to use a more
appropriate prefix.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

After driver initialization tpm_tis_data->locality may only be modified in
case of a LOCALITY CHANGE interrupt. In this case the interrupt handler
iterates over all localities only to assign the active one to
tpm_tis_data->locality.

However this information is never used any more, so the assignment is not
needed.
Furthermore without the assignment tpm_tis_data->locality cannot change any
more at driver runtime, and thus no protection against concurrent
modification is required when the variable is read at other places.

So remove this iteration entirely.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Clean up wait_for_tpm_stat() by moving multiple similar interrupt mask
checks into an own function.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

According to the TPM Interface Specification (TIS) support for "stsValid"
and "commandReady" interrupts is only optional.
This has to be taken into account when handling the interrupts in functions
like wait_for_tpm_stat(). To determine the supported interrupts use the
capability query.

Also adjust wait_for_tpm_stat() to only wait for interrupt reported status
changes. After that process all the remaining status changes by polling
the status register.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

In tpm_tis_probe_single_irq() interrupt registers TPM_INT_VECTOR,
TPM_INT_STATUS and TPM_INT_ENABLE are modified to setup the interrupts.
Currently these modifications are done without holding a locality thus they
have no effect. Fix this by claiming the (default) locality before the
registers are written.

Since now tpm_tis_gen_interrupt() is called with the locality already
claimed remove locality request and release from this function.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

If in tpm_tis_probe_irq_single() an error occurs after the original
interrupt vector has been read, restore the interrupts before the error is
returned.

Since the caller does not check the error value, return -1 in any case that
the TPM_CHIP_FLAG_IRQ flag is not set. Since the return value of function
tpm_tis_gen_interrupt() is not longer used, make it a void function.

Fixes: 1107d065 ("tpm_tis: Introduce intermediate layer for TPM access")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Both functions tpm_tis_probe_irq_single() and tpm_tis_probe_irq() may setup
the interrupts and then return with an error. This case is indicated by a
missing TPM_CHIP_FLAG_IRQ flag in chip->flags.
Currently the interrupt setup is only undone if tpm_tis_probe_irq_single()
fails. Undo the setup also if tpm_tis_probe_irq() fails.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

In disable_interrupts() the TPM_GLOBAL_INT_ENABLE bit is unset in the
TPM_INT_ENABLE register to shut the interrupts off. However modifying the
register is only possible with a held locality. So claim the locality
before disable_interrupts() is called.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The interrupt handler that sets the boolean variable irq_tested may run on
another CPU as the thread that checks irq_tested as part of the irq test in
tpm_tis_send().

Since nothing guarantees cache coherency between CPUs for unsynchronized
accesses to boolean variables the testing thread might not perceive the
value change done in the interrupt handler.

Avoid this issue by setting the bit TPM_TIS_IRQ_TESTED in the flags field
of the tpm_tis_data struct and by accessing this field with the bit
manipulating functions that provide cache coherency.

Also convert all other existing sites to use the proper macros when
accessing this bitfield.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Add machine keyring CA restriction options to control the type of
keys that may be added to it. The motivation is separation of
certificate signing from code signing keys. Subsquent work will
limit certificates being loaded into the IMA keyring to code
signing keys used for signature verification.

When no restrictions are selected, all Machine Owner Keys (MOK) are added
to the machine keyring.  When CONFIG_INTEGRITY_CA_MACHINE_KEYRING is
selected, the CA bit must be true.  Also the key usage must contain
keyCertSign, any other usage field may be set as well.

When CONFIG_INTEGRITY_CA_MACHINE_KEYRING_MAX is selected, the CA bit must
be true. Also the key usage must contain keyCertSign and the
digitialSignature usage may not be set.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Add a new link restriction.  Restrict the addition of keys in a keyring
based on the key to be added being a CA.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Parse the X.509 Key Usage.  The key usage extension defines the purpose of
the key contained in the certificate.

   id-ce-keyUsage OBJECT IDENTIFIER ::=  { id-ce 15 }

      KeyUsage ::= BIT STRING {
           digitalSignature        (0),
           contentCommitment       (1),
           keyEncipherment         (2),
           dataEncipherment        (3),
           keyAgreement            (4),
           keyCertSign             (5),
           cRLSign                 (6),
           encipherOnly            (7),
           decipherOnly            (8) }

If the keyCertSign or digitalSignature is set, store it in the
public_key structure. Having the purpose of the key being stored
during parsing, allows enforcement on the usage field in the future.
This will be used in a follow on patch that requires knowing the
certificate key usage type.

Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.3Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Parse the X.509 Basic Constraints.  The basic constraints extension
identifies whether the subject of the certificate is a CA.

BasicConstraints ::= SEQUENCE {
        cA                      BOOLEAN DEFAULT FALSE,
        pathLenConstraint       INTEGER (0..MAX) OPTIONAL }

If the CA is true, store it in the public_key.  This will be used
in a follow on patch that requires knowing if the public key is a CA.

Link: https://www.rfc-editor.org/rfc/rfc5280#section-4.2.1.9Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Compiling with 'W=1' results in warnings that 'Function parameter or member
not described'

Add the missing parameters for
restrict_link_by_builtin_and_secondary_trusted and
restrict_link_to_builtin_trusted.

Use /* instead of /** for get_builtin_and_secondary_restriction, since
it is a static function.

Fix wrong function name restrict_link_to_builtin_trusted.

Fixes: d3bfe841 ("certs: Add a secondary system keyring that can be added to dynamically")
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The kernel test robot reports undefined reference to
public_key_verify_signature when CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is
not defined. Create a static version in this case and return -EINVAL.

Fixes: db6c43bd ("crypto: KEYS: convert public key and digsig asym to the akcipher api")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>