- 04 May, 2016 40 commits
-
-
Namhyung Kim authored
commit c221acb0 upstream. When this feature was introduced a check was made if there was a resolved symbol under the cursor, it got lost in commit ea7cd592 ("perf hists browser: Split popup menu actions - part 2"), reinstate it. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org>, Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: ea7cd592 ("perf hists browser: Split popup menu actions - part 2") Link: http://lkml.kernel.org/r/1452960197-5323-9-git-send-email-namhyung@kernel.org [ Carved out from a larger patch ] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ezequiel García authored
commit 20c07a5b upstream. Since commit 807f16d4 ("mtd: core: set some defaults when dev.parent is set"), it's now legal for drivers to call nand_scan and nand_scan_ident without setting mtd.owner. Drop the check and while at it remove the BUG() abuse. Fixes: 807f16d4 ("mtd: core: set some defaults when dev.parent is set") Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> [Brian: editorial note - while commit 807f16d4 wasn't explicitly broken, some follow-up commits in the v4.4 release broke a few drivers, since they would hit this BUG() if they used nand_scan() and were built as modules] Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Florian Fainelli authored
commit d267aefc upstream. The BRCMNAND controller revision 7.1 is almost 100% compatible with the previous v6.0 register offset layout, except for the Correctable Error Reporting Threshold registers. Fix this by adding another table with the correct offsets for CORR_THRESHOLD and CORR_THRESHOLD_EXT. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Cyrille Pitchen authored
commit 3b5394a3 upstream. This patch remove the micron_quad_enable() function which force the Quad SPI mode. However, once this mode is enabled, the Micron memory expect ALL commands to use the SPI 4-4-4 protocol. Hence a failure does occur when calling spi_nor_wait_till_ready() right after the update of the Enhanced Volatile Configuration Register (EVCR) in the micron_quad_enable() as the SPI controller driver is not aware about the protocol change. Since there is almost no performance increase using Fast Read 4-4-4 commands instead of Fast Read 1-1-4 commands, we rather keep on using the Extended SPI mode than enabling the Quad SPI mode. Let's take the example of the pretty standard use of 8 dummy cycles during Fast Read operations on 64KB erase sectors: Fast Read 1-1-4 requires 8 cycles for the command, then 24 cycles for the 3byte address followed by 8 dummy clock cycles and finally 65536*2 cycles for the read data; so 131112 clock cycles. On the other hand the Fast Read 4-4-4 would require 2 cycles for the command, then 6 cycles for the 3byte address followed by 8 dummy clock cycles and finally 65536*2 cycles for the read data. So 131088 clock cycles. The theorical bandwidth increase is 0.0%. Now using Fast Read operations on 512byte pages: Fast Read 1-1-4 needs 8+24+8+(512*2) = 1064 clock cycles whereas Fast Read 4-4-4 would requires 2+6+8+(512*2) = 1040 clock cycles. Hence the theorical bandwidth increase is 2.3%. Consecutive reads for non sequential pages is not a relevant use case so The Quad SPI mode is not worth it. mtd_speedtest seems to confirm these figures. Signed-off-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Fixes: 548cd3ab ("mtd: spi-nor: Add quad I/O support for Micron SPI NOR") Signed-off-by:
-
Kunihiko Hayashi authored
commit 3de7beeb upstream. This patch fixes condition whether the specified address ranges overlap each other. Fixes: 4b7f48d3 ("bus: uniphier-system-bus: add UniPhier System Bus driver") Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Chao Yu authored
commit ed3360ab upstream. This patch syncs f2fs with commit 6bc445e0 ("ext4 crypto: make sure the encryption info is initialized on opendir(2)") from ext4. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Chao Yu authored
commit ae108668 upstream. This patch syncs f2fs with commit abdd438b ("ext4 crypto: handle unexpected lack of encryption keys") from ext4. Fix up attempts by users to try to write to a file when they don't have access to the encryption key. Signed-off-by:
-
Jaegeuk Kim authored
commit e3ef1876 upstream. If end_io gets an error, we don't need to set the page as dirty, since we already set f2fs_stop_checkpoint which will not flush any data. This will resolve the following warning. ====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 4.4.0+ #9 Tainted: G O ------------------------------------------------------ xfs_io/26773 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (&(&sbi->inode_lock[i])->rlock){+.+...}, at: [<ffffffffc025483f>] update_dirty_page+0x6f/0xd0 [f2fs] and this task is already holding: (&(&q->__queue_lock)->rlock){-.-.-.}, at: [<ffffffff81396ea2>] blk_queue_bio+0x422/0x490 which would create a new lock dependency: (&(&q->__queue_lock)->rlock){-.-.-.} -> (&(&sbi->inode_lock[i])->rlock){+.+...} Signed-off-by:
-
Jaegeuk Kim authored
commit 3c082b7b upstream. We should consider data block allocation to trigger f2fs_balance_fs. Signed-off-by:
-
Jaegeuk Kim authored
commit 03a8bb0e upstream. As Al pointed, d_revalidate should return RCU lookup before using d_inode. This was originally introduced by: commit 34286d66 ("fs: rcu-walk aware d_revalidate method"). Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jaegeuk Kim authored
commit fd694733 upstream. This patch fixes the bug which does not cover a large section case when checking the sanity of superblock. If f2fs detects misalignment, it will fix the superblock during the mount time, so it doesn't need to trigger fsck.f2fs further. Reported-by:
Matthias Prager <linux@matthiasprager.de> Reported-by:
David Gnedt <david.gnedt@davizone.at> Signed-off-by:
-
Shawn Lin authored
commit 2b39e907 upstream. read_raw_super_block was introduced to help find the first valid superblock. Commit da554e48 ("f2fs: recovering broken superblock during mount") changed the behaviour to read both of them and check whether need the recovery flag or not. So the comment before this function isn't consistent with what it actually does. Also, the origin code use two tags to round the err cases, which isn't so readable. So this patch amend the comment and slightly reorganize it. Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
-
Jaegeuk Kim authored
commit c90e09f7 upstream. In the encrypted symlink case, we should check its corrupted symname after decrypting it. Otherwise, we can report -ENOENT incorrectly, if encrypted symname starts with '\0'. Signed-off-by:
-
Eryu Guan authored
commit 5e1021f2 upstream. ext4_reserve_inode_write() in ext4_mark_inode_dirty() could fail on error (e.g. EIO) and iloc.bh can be NULL in this case. But the error is ignored in the following "if" condition and ext4_expand_extra_isize() might be called with NULL iloc.bh set, which triggers NULL pointer dereference. This is uncovered by commit 8b4953e1 ("ext4: reserve code points for the project quota feature"), which enlarges the ext4_inode size, and run the following script on new kernel but with old mke2fs: #/bin/bash mnt=/mnt/ext4 devname=ext4-error dev=/dev/mapper/$devname fsimg=/home/fs.img trap cleanup 0 1 2 3 9 15 cleanup() { umount $mnt >/dev/null 2>&1 dmsetup remove $devname losetup -d $backend_dev rm -f $fsimg exit 0 } rm -f $fsimg fallocate -l 1g $fsimg backend_dev=`losetup -f --show $fsimg` devsize=`blockdev --getsz $backend_dev` good_tab="0 $devsize linear $backend_dev 0" error_tab="0 $devsize error $backend_dev 0" dmsetup create $devname --table "$good_tab" mkfs -t ext4 $dev mount -t ext4 -o errors=continue,strictatime $dev $mnt dmsetup load $devname --table "$error_tab" && dmsetup resume $devname echo 3 > /proc/sys/vm/drop_caches ls -l $mnt exit 0 [ Patch changed to simplify the function a tiny bit. -- Ted ] Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
-
Karol Herbst authored
commit cfa52c0c upstream. Because Linux might use bigger pages than the 4K pages to handle those mmio ioremaps, the kmmio code shouldn't rely on the pade id as it currently does. Using the memory address instead of the page id lets us look up how big the page is and what its base address is, so that we won't get a page fault within the same page twice anymore. Tested-by:
Pierre Moreau <pierre.morrow@free.fr> Signed-off-by:
Karol Herbst <nouveau@karolherbst.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-mm@kvack.org Cc: linux-x86_64@vger.kernel.org Cc: nouveau@lists.freedesktop.org Cc: pq@iki.fi Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/1456966991-6861-1-git-send-email-nouveau@karolherbst.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Chris Phlipot authored
commit 616df645 upstream. Remove the union in evsel so that the database id and priv pointer can be used simultainously without conflicting and crashing. Detailed Description for the fixed bug follows: perf script crashes with a segmentation fault on user space tool version 4.5.rc7.ge2857b when using the python database export API. It works properly in 4.4 and prior versions. the crash fist appeared in: cfc8874a ("perf script: Process cpu/threads maps") How to reproduce the bug: Remove any temporary files left over from a previous crash (if you have already attemped to reproduce the bug): $ rm -r test_db-perf-data $ dropdb test_db $ perf record timeout 1 yes >/dev/null $ perf script -s scripts/python/export-to-postgresql.py test_db Stack Trace: Program received signal SIGSEGV, Segmentation fault. __GI___libc_free (mem=0x1) at malloc.c:2929 2929 malloc.c: No such file or directory. (gdb) bt at util/stat.c:122 argv=<optimized out>, prefix=<optimized out>) at builtin-script.c:2231 argc=argc@entry=4, argv=argv@entry=0x7fffffffdf70) at perf.c:390 at perf.c:451 Signed-off-by:
Chris Phlipot <cphlipot0@gmail.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: cfc8874a ("perf script: Process cpu/threads maps") Link: http://lkml.kernel.org/r/1457500314-8912-1-git-send-email-cphlipot0@gmail.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit a55e5663 upstream. We were dropping the reference we possibly held but not obtaining one for the new maps, which we will drop at perf_evlist__delete(), fix it. This was caught by Steven Noonan in some of the machines which would produce this output when caught by glibc debug mechanisms: $ sudo perf test 21 21: Test object code reading :*** Error in `perf': corrupted double-linked list: 0x00000000023ffcd0 *** ======= Backtrace: ========= /usr/lib/libc.so.6(+0x72055)[0x7f25be0f3055] /usr/lib/libc.so.6(+0x779b6)[0x7f25be0f89b6] /usr/lib/libc.so.6(+0x7a0ed)[0x7f25be0fb0ed] /usr/lib/libc.so.6(__libc_calloc+0xba)[0x7f25be0fceda] perf(parse_events_lex_init_extra+0x38)[0x4cfff8] perf(parse_events+0x55)[0x4a0615] perf(perf_evlist__config+0xcf)[0x4eeb2f] perf[0x479f82] perf(test__code_reading+0x1e)[0x47ad4e] perf(cmd_test+0x5dd)[0x46452d] perf[0x47f4e3] perf(main+0x603)[0x42c723] /usr/lib/libc.so.6(__libc_start_main+0xf0)[0x7f25be0a1610] perf(_start+0x29)[0x42c859] Further investigation using valgrind led to the reference count imbalance fixed in this patch. Reported-and-Tested-by:
Steven Noonan <steven@uplinklabs.net> Report-Link: http://lkml.kernel.org/r/CAKbGBLjC2Dx5vshxyGmQkcD+VwiAQLbHoXA9i7kvRB2-2opHZQ@mail.gmail.com Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: f30a79b0 ("perf tools: Add reference counting for cpu_map object") Link: http://lkml.kernel.org/n/tip-j0u1bdhr47sa511sgg76kb8h@git.kernel.orgSigned-off-by:
-
Michael Hennerich authored
commit f3df53e4 upstream. Fix RDAC read back errors caused by a typo. Value must shift by 2. Fixes: a4bd3949 ("drivers/misc/ad525x_dpot.c: new features") Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit fb166ba1 upstream. The regmap_irq_get_virq() can return 0 or -EINVAL in error conditions but driver checked only for value of 0. This could lead to a cast of -EINVAL to an unsigned int used as a interrupt number for devm_request_threaded_irq(). Although this is not yet fatal (devm_request_threaded_irq() will just fail with -EINVAL) but might be a misleading when diagnosing errors. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 6f1c1e71 ("mfd: max77686: Convert to use regmap_irq") Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Alexandre Belloni authored
commit aaa3cee5 upstream. The rv8803 has its own driver that should be used. Remove its id from the rx8025 driver. Fixes: b1f9d790Signed-off-by:
-
Dan Carpenter authored
commit 8c09b9fd upstream. We call spin_lock_irqrestore with "flags" set to zero instead of to the value from spin_lock_irqsave(). Fixes: aaaf5fbf ('rtc: add driver for DS1685 family of real time clocks') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit a25f4a95 upstream. drivers/rtc/rtc-vr41xx.c:229: warning: ‘vr41xx_rtc_alarm_irq_enable’ defined but not used Apparently the conversion to alarm_irq_enable forgot to wire up the callback. Fixes: 16380c15 ("RTC: Convert rtc drivers to use the alarm_irq_enable method") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Alexander Kochetkov authored
commit d5861262 upstream. Year field must be in BCD format, according to hym8563 datasheet. Due to the bug year 2016 became 2010. Fixes: dcaf0384 ("rtc: add hym8563 rtc-driver") Signed-off-by:
Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by:
-
Jon Hunter authored
commit beda5fc1 upstream. Commit 30e7a65b (PM / Domains: Ensure subdomain is not in use before removing) added a test to ensure that a subdomain is not a master to another subdomain or if any devices are using the subdomain before removing. This change incorrectly used the "slave_links" list to determine if the subdomain is a master to another subdomain, where it should have been using the "master_links" list instead. The "slave_links" list will never be empty for a subdomain and so a subdomain can never be removed. Fix this by testing if the "master_links" list is empty instead. Fixes: 30e7a65b (PM / Domains: Ensure subdomain is not in use before removing) Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Acked-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Viresh Kumar authored
commit c88c395f upstream. We kept u_volt_min/max initialized to 0, when only the target voltage is present in DT, instead of the target/min/max triplet. This didn't go well with the regulator framework, as on few calls the min voltage was set to target and max was set to 0 and so resulted in a kernel crash like below: kernel BUG at ../drivers/regulator/core.c:216! [<c0684af4>] (regulator_check_voltage) from [<c06857ac>] (regulator_set_voltage_unlocked+0x58/0x230) [<c06857ac>] (regulator_set_voltage_unlocked) from [<c06859ac>] (regulator_set_voltage+0x28/0x54) [<c06859ac>] (regulator_set_voltage) from [<c0775b28>] (_set_opp_voltage+0x30/0x98) [<c0775b28>] (_set_opp_voltage) from [<c0776630>] (dev_pm_opp_set_rate+0xf0/0x28c) [<c0776630>] (dev_pm_opp_set_rate) from [<c096f784>] (__cpufreq_driver_target+0x184/0x2b4) [<c096f784>] (__cpufreq_driver_target) from [<c0973760>] (dbs_check_cpu+0x1b0/0x1f4) [<c0973760>] (dbs_check_cpu) from [<c0973f30>] (cpufreq_governor_dbs+0x324/0x5c4) [<c0973f30>] (cpufreq_governor_dbs) from [<c0970958>] (__cpufreq_governor+0xe4/0x1ec) [<c0970958>] (__cpufreq_governor) from [<c09711e0>] (cpufreq_init_policy+0x64/0x8c) [<c09711e0>] (cpufreq_init_policy) from [<c09718cc>] (cpufreq_online+0x2fc/0x708) [<c09718cc>] (cpufreq_online) from [<c0765ff0>] (subsys_interface_register+0x94/0xd8) [<c0765ff0>] (subsys_interface_register) from [<c0970530>] (cpufreq_register_driver+0x14c/0x19c) [<c0970530>] (cpufreq_register_driver) from [<c09746dc>] (dt_cpufreq_probe+0x70/0xec) [<c09746dc>] (dt_cpufreq_probe) from [<c076907c>] (platform_drv_probe+0x4c/0xb0) [<c076907c>] (platform_drv_probe) from [<c07678e0>] (driver_probe_device+0x214/0x2c0) [<c07678e0>] (driver_probe_device) from [<c0767a18>] (__driver_attach+0x8c/0x90) [<c0767a18>] (__driver_attach) from [<c0765c2c>] (bus_for_each_dev+0x68/0x9c) [<c0765c2c>] (bus_for_each_dev) from [<c0766d78>] (bus_add_driver+0x1a0/0x218) [<c0766d78>] (bus_add_driver) from [<c076810c>] (driver_register+0x78/0xf8) [<c076810c>] (driver_register) from [<c0301d74>] (do_one_initcall+0x90/0x1d8) [<c0301d74>] (do_one_initcall) from [<c1100e14>] (kernel_init_freeable+0x15c/0x1fc) [<c1100e14>] (kernel_init_freeable) from [<c0b27a0c>] (kernel_init+0x8/0xf0) [<c0b27a0c>] (kernel_init) from [<c0307d78>] (ret_from_fork+0x14/0x3c) Code: e1550004 baffffeb e3a00000 e8bd8070 (e7f001f2) Fix that by initializing u_volt_min/max to the target voltage in such cases. Reported-and-tested-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Dan Carpenter authored
commit 7b64dbf8 upstream. Signed integer overflow is undefined. Also I added a check for "(offset < 0)" in scif_unregister() because that makes it match the other conditions and because I didn't want to subtract a negative. Fixes: ba612aa8 ('misc: mic: SCIF memory registration and unregistration') Signed-off-by:
-
Ben Hutchings authored
commit 50e6315d upstream. Commit 985087db 'misc: add support for bmp18x chips to the bmp085 driver' changed the BMP085 config symbol to a boolean. I see no reason why the shared code cannot be built as a module, so change it back to tristate. Fixes: 985087db ("misc: add support for bmp18x chips to the bmp085 driver") Cc: Eric Andersson <eric.andersson@unixphere.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Michal Marek authored
commit 3ee0cb5f upstream. The limbs are integers in the host endianness, so we can't simply iterate over the individual bytes. The current code happens to work on little-endian, because the order of the limbs in the MPI array is the same as the order of the bytes in each limb, but it breaks on big-endian. Fixes: 0f74fbf7 ("MPI: Fix mpi_read_buffer") Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Sushaanth Srirangapathi authored
commit 713fced8 upstream. Commit 028cd86b ("video: da8xx-fb: fix the polarities of the hsync/vsync pulse") fixes polarities of HSYNC/VSYNC pulse but forgot to update known_lcd_panels[] which had sync values according to old logic. This breaks LCD at least on DA850 EVM. This patch fixes this issue and I have tested this for panel "Sharp_LK043T1DG01" using DA850 EVM board. Fixes: 028cd86b ("video: da8xx-fb: fix the polarities of the hsync/vsync pulse") Signed-off-by:
Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Arnd Bergmann authored
commit 0c994c03 upstream. When the scsi_dh core was moved into the scsi core module, CONFIG_SCSI_DH became a 'bool' option, and now anything depending on it can be built-in even when CONFIG_SCSI=m. This of course cannot link successfully: drivers/scsi/built-in.o: In function `rdac_init': scsi_dh_alua.c:(.init.text+0x14): undefined reference to `scsi_register_device_handler' scsi_dh_alua.c:(.init.text+0x64): undefined reference to `scsi_unregister_device_handler' drivers/scsi/built-in.o: In function `alua_init': scsi_dh_alua.c:(.init.text+0xb0): undefined reference to `scsi_register_device_handler' As a workaround, this adds an extra dependency on CONFIG_SCSI, so Kconfig can figure out whether built-in is allowed or not. Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Arnd Bergmann authored
commit dec63a4d upstream. gcc-6.0 found an ancient bug in the paride driver, which had a "module_param(verbose, bool, 0);" since before 2.6.12, but actually uses it to accept '0', '1' or '2' as arguments: drivers/block/paride/pd.c: In function 'pd_init_dev_parms': drivers/block/paride/pd.c:298:29: warning: comparison of constant '1' with boolean expression is always false [-Wbool-compare] #define DBMSG(msg) ((verbose>1)?(msg):NULL) In 2012, Rusty did a cleanup patch that also changed the type of the variable to 'bool', which introduced what is now a gcc warning. This changes the type back to 'int' and adapts the module_param() line instead, so it should work as documented in case anyone ever cares about running the ancient driver with debugging. Fixes: 90ab5ee9 ("module_param: make bool parameters really bool (drivers & misc)") Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
commit e07ff943 upstream. The s5m8767_pmic_probe() function calls s5m8767_get_register() to read data without checking the return code, which produces a compile-time warning when that data is accessed: drivers/regulator/s5m8767.c: In function 's5m8767_pmic_probe': drivers/regulator/s5m8767.c:924:7: error: 'enable_reg' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/regulator/s5m8767.c:944:30: error: 'enable_val' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes the s5m8767_get_register() function to return a -EINVAL not just for an invalid register number but also for an invalid regulator number, as both would result in returning uninitialized data. The s5m8767_pmic_probe() function is then changed accordingly to fail on a read error, as all the other callers of s5m8767_get_register() already do. In practice this probably cannot happen, as we don't call s5m8767_get_register() with invalid arguments, but the gcc warning seems valid in principle, in terms writing safe error checking. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Vladimir Zapolskiy authored
commit edf8fcdc upstream. The of_io_request_and_map() returns a valid pointer in iomem region or ERR_PTR(), check for NULL always fails and may cause a NULL pointer dereference on error path. Fixes: 25e34b44 ("irqchip/mxs: Prepare driver for hardware with different offsets") Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Oleksij Rempel <linux@rempel-privat.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1457486500-10237-1-git-send-email-vz@mleia.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Vladimir Zapolskiy authored
commit cfe199af upstream. The of_io_request_and_map() returns a valid pointer in iomem region or ERR_PTR(), check for NULL always fails and may cause a NULL pointer dereference on error path. Fixes: 0e841b04 ("irqchip/sunxi-nmi: Switch to of_io_request_and_map() from of_iomap()") Signed-off-by:
-
Huibin Hong authored
commit b920cc31 upstream. Rockchip_spi_set_cs could be called by spi_setup, but spi_setup may be called by device driver after runtime suspend. Then the spi clock is closed, rockchip_spi_set_cs may access the spi registers, which causes cpu block in some socs. Fixes: 64e36824 ("spi/rockchip: add driver for Rockchip RK3xxx") Signed-off-by:
Huibin Hong <huibin.hong@rock-chips.com> Signed-off-by:
-
Peter Zijlstra authored
commit 920c720a upstream. Similar to commit b4b29f94 ("locking/osq: Fix ordering of node initialisation in osq_lock") the use of xchg_acquire() is fundamentally broken with MCS like constructs. Furthermore, it turns out we rely on the global transitivity of this operation because the unlock path observes the pointer with a READ_ONCE(), not an smp_load_acquire(). This is non-critical because the MCS code isn't actually used and mostly serves as documentation, a stepping stone to the more complex things we've build on top of the idea. Reported-by:
Andrea Parri <parri.andrea@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Fixes: 3552a07a ("locking/mcs: Use acquire/release semantics") Signed-off-by:
-
Ignat Korchagin authored
commit b348d7dd upstream. Fix potential out-of-bounds write to urb->transfer_buffer usbip handles network communication directly in the kernel. When receiving a packet from its peer, usbip code parses headers according to protocol. As part of this parsing urb->actual_length is filled. Since the input for urb->actual_length comes from the network, it should be treated as untrusted. Any entity controlling the network may put any value in the input and the preallocated urb->transfer_buffer may not be large enough to hold the data. Thus, the malicious entity is able to write arbitrary data to kernel memory. Signed-off-by:
Ignat Korchagin <ignat.korchagin@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Minchan Kim authored
commit d7e69488 upstream. Currently, migration code increses num_poisoned_pages on *failed* migration page as well as successfully migrated one at the trial of memory-failure. It will make the stat wrong. As well, it marks the page as PG_HWPoison even if the migration trial failed. It would mean we cannot recover the corrupted page using memory-failure facility. This patches fixes it. Signed-off-by:
Minchan Kim <minchan@kernel.org> Reported-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Minchan Kim authored
commit 7bf52fb8 upstream. We have been reclaimed highmem zone if buffer_heads is over limit but commit 6b4f7799 ("mm: vmscan: invoke slab shrinkers from shrink_zone()") changed the behavior so it doesn't reclaim highmem zone although buffer_heads is over the limit. This patch restores the logic. Fixes: 6b4f7799 ("mm: vmscan: invoke slab shrinkers from shrink_zone()") Signed-off-by:
-
Gerald Schaefer authored
commit 28093f9f upstream. In gather_pte_stats() a THP pmd is cast into a pte, which is wrong because the layouts may differ depending on the architecture. On s390 this will lead to inaccurate numa_maps accounting in /proc because of misguided pte_present() and pte_dirty() checks on the fake pte. On other architectures pte_present() and pte_dirty() may work by chance, but there may be an issue with direct-access (dax) mappings w/o underlying struct pages when HAVE_PTE_SPECIAL is set and THP is available. In vm_normal_page() the fake pte will be checked with pte_special() and because there is no "special" bit in a pmd, this will always return false and the VM_PFNMAP | VM_MIXEDMAP checking will be skipped. On dax mappings w/o struct pages, an invalid struct page pointer would then be returned that can crash the kernel. This patch fixes the numa_maps THP handling by introducing new "_pmd" variants of the can_gather_numa_stats() and vm_normal_page() functions. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
-
