- 20 Nov, 2019 1 commit
-
-
Thomas Gleixner authored
Merge tag 'irqchip-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - Qualcomm PDC wakeup interrupt support - Layerscape external IRQ support - Broadcom bcm7038 PM and wakeup support - Ingenic driver cleanup and modernization - GICv3 ITS preparation for GICv4.1 updates - GICv4 fixes - Various cleanups
-
- 16 Nov, 2019 9 commits
-
-
Lina Iyer authored
Add interrupt parents for wakeup capable GPIOs for Qualcomm SDM845 SoC. Signed-off-by:
Lina Iyer <ilina@codeaurora.org> Signed-off-by:
Marc Zyngier <maz@kernel.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-10-git-send-email-ilina@codeaurora.org
-
Lina Iyer authored
Some GPIOs are marked as wakeup capable and are routed to another interrupt controller that is an always-domain and can detect interrupts even when most of the SoC is powered off. The wakeup interrupt controller wakes up the GIC and replays the interrupt at the GIC. Setup the TLMM irqchip in hierarchy with the wakeup interrupt controller and ensure the wakeup GPIOs are handled correctly. Co-developed-by:
Maulik Shah <mkshah@codeaurora.org> Signed-off-by:
-
Maulik Shah authored
Add irqchip calls to set/get interrupt state from the parent interrupt controller. When GPIOs are renabled as interrupt lines, it is desirable to clear the interrupt state at the GIC. This avoids any unwanted interrupt as a result of stale pending state recorded when the line was used as a GPIO. Signed-off-by:
-
Lina Iyer authored
Introduce a new domain for wakeup capable GPIOs. The domain can be requested using the bus token DOMAIN_BUS_WAKEUP. In the following patches, we will specify PDC as the wakeup-parent for the TLMM GPIO irqchip. Requesting a wakeup GPIO will setup the GPIO and the corresponding PDC interrupt as its parent. Co-developed-by:
-
Lina Iyer authored
When an interrupt is to be serviced, the convention is to mask the interrupt at the chip and unmask after servicing the interrupt. Enabling and disabling the interrupt at the PDC irqchip causes an interrupt storm due to the way dual edge interrupts are handled in hardware. Skip configuring the PDC when the IRQ is masked and unmasked, instead use the irq_enable/irq_disable callbacks to toggle the IRQ_ENABLE register at the PDC. The PDC's IRQ_ENABLE register is only used during the monitoring mode when the system is asleep and is not needed for active mode detection. Signed-off-by:
-
Lina Iyer authored
Newer SoCs have increased the number of interrupts routed to the PDC interrupt controller. Update the definition of max PDC interrupts. Signed-off-by:
-
Lina Iyer authored
Some interrupt controllers in a SoC, are always powered on and have a select interrupts routed to them, so that they can wakeup the SoC from suspend. Add wakeup-parent DT property to refer to these interrupt controllers. Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Maulik Shah authored
On certain QTI chipsets some GPIOs are direct-connect interrupts to the GIC to be used as regular interrupt lines. When the GPIOs are not used for interrupt generation the interrupt line is disabled. But disabling the interrupt at GIC does not prevent the interrupt to be reported as pending at GIC_ISPEND. Later, when drivers call enable_irq() on the interrupt, an unwanted interrupt occurs. Introduce get and set methods for irqchip's parent to clear it's pending irq state. This then can be invoked by the GPIO interrupt controller on the parents in it hierarchy to clear the interrupt before enabling the interrupt. Signed-off-by:
-
Lina Iyer authored
A single controller can handle normal interrupts and wake-up interrupts independently, with a different numbering space. It is thus crucial to allow the driver for such a controller discriminate between the two. A simple way to do so is to tag the wake-up irqdomain with a "bus token" that indicates the wake-up domain. This slightly abuses the notion of bus, but also radically simplifies the design of such a driver. Between two evils, we choose the least damaging. Suggested-by:
-
- 15 Nov, 2019 2 commits
-
-
luanshi authored
The function got renamed at some point, but the kernel-doc was not updated. Signed-off-by:
Liguang Zhang <zhangliguang@linux.alibaba.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1573656093-8643-1-git-send-email-zhangliguang@linux.alibaba.com
-
Frederic Weisbecker authored
While attempting to clear the busy bit at the end of a work execution, atomic_cmpxchg() expects the value of the flags with the pending bit cleared as the old value. However by mistake the value of the flags is passed without clearing the pending bit first. As a result, clearing the busy bit fails and irq_work_sync() may stall: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [blktrace:4948] CPU: 0 PID: 4948 Comm: blktrace Not tainted 5.4.0-rc7-00003-gfeb4a513 #1 RIP: 0010:irq_work_sync+0x4/0x10 Call Trace: relay_close_buf+0x19/0x50 relay_close+0x64/0x100 blk_trace_free+0x1f/0x50 __blk_trace_remove+0x1e/0x30 blk_trace_ioctl+0x11b/0x140 blkdev_ioctl+0x6c1/0xa40 block_ioctl+0x39/0x40 do_vfs_ioctl+0xa5/0x700 ksys_ioctl+0x70/0x80 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5b/0x1d0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 So clear the appropriate bit before passing the old flags to cmpxchg(). Fixes: feb4a513 ("irq_work: Slightly simplify IRQ_WORK_PENDING clearing") Reported-by:
kernel test robot <rong.a.chen@intel.com> Reported-by:
Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by:
Frederic Weisbecker <frederic@kernel.org> Signed-off-by:
-
- 11 Nov, 2019 5 commits
-
-
Markus Elfring authored
A coccicheck run provided information like the following. drivers/irqchip/irq-ti-sci-inta.c:250:9-16: WARNING: ERR_CAST can be used with vint_desc. Generated by: scripts/coccinelle/api/err_cast.cocci Thus adjust the exception handling in one if branch. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/776b7135-26af-df7d-c3a9-4339f7bf1f15@web.de
-
Frederic Weisbecker authored
Instead of fetching the value of flags and perform an xchg() to clear a bit, just use atomic_fetch_andnot() that is more suitable to do that job in one operation while keeping the full ordering. Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Frederic Weisbecker authored
When irq_work_claim() finds IRQ_WORK_PENDING flag already set, we just return and don't raise a new IPI. We expect the destination to see and handle our latest updades thanks to the pairing atomic_xchg() in irq_work_run_list(). But cmpxchg() doesn't guarantee a full memory barrier upon failure. So it's possible that the destination misses our latest updates. So use atomic_fetch_or() instead that is unconditionally fully ordered and also performs exactly what we want here and simplify the code. Signed-off-by:
-
Frederic Weisbecker authored
We need to convert flags to atomic_t in order to later fix an ordering issue on atomic_cmpxchg() failure. This will allow us to use atomic_fetch_or(). Also clarify the nature of those flags. [ mingo: Converted two more usage site the original patch missed. ] Signed-off-by:
-
Linus Torvalds authored
-
- 10 Nov, 2019 23 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A set of fixes that have trickled in over the last couple of weeks: - MAINTAINER update for Cavium/Marvell ThunderX2 - stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for CAN interfaces - i.MX fixes for voltage regulator GPIO mappings, fixes voltage scaling issues - More i.MX fixes for various issues on i.MX eval boards: interrupt storm due to u-boot leaving pins in new states, fixing power button config, a couple of compatible-string corrections. - Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets - A few documentation tweaks and a fix of a memory leak in the reset subsystem" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: update Cavium ThunderX2 maintainers ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1 ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 arm64: dts: zii-ultra: fix ARM regulator GPIO handle ARM: sunxi: Fix CPU powerdown on A83T ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend arm64: dts: imx8mn: fix compatible string for sdma arm64: dts: imx8mm: fix compatible string for sdma reset: fix reset_control_ops kerneldoc comment ARM: dts: imx6-logicpd: Re-enable SNVS power key soc: imx: gpc: fix initialiser format ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts arm64: dts: ls1028a: fix a compatible issue reset: fix reset_control_get_exclusive kerneldoc comment reset: fix reset_control_lookup kerneldoc comment reset: fix of_reset_control_get_count kerneldoc comment reset: fix of_reset_simple_xlate kerneldoc comment reset: Fix memory leak in reset_control_array_put() -
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull IIO fixes and staging driver from Greg KH: "Here is a mix of a number of IIO driver fixes for 5.4-rc7, and a whole new staging driver. The IIO fixes resolve some reported issues, all are tiny. The staging driver addition is the vboxsf filesystem, which is the VirtualBox guest shared folder code. Hans has been trying to get filesystem reviewers to review the code for many months now, and Christoph finally said to just merge it in staging now as it is stand-alone and the filesystem people can review it easier over time that way. I know it's late for this big of an addition, but it is stand-alone. The code has been in linux-next for a while, long enough to pick up a few tiny fixes for it already so people are looking at it. All of these have been in linux-next with no reported issues" * tag 'staging-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: Fix error return code in vboxsf_fill_super() staging: vboxsf: fix dereference of pointer dentry before it is null checked staging: vboxsf: Remove unused including <linux/version.h> staging: Add VirtualBox guest shared folder (vboxsf) support iio: adc: stm32-adc: fix stopping dma iio: imu: inv_mpu6050: fix no data on MPU6050 iio: srf04: fix wrong limitation in distance measuring iio: imu: adis16480: make sure provided frequency is positive
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are a number of late-arrival driver fixes for issues reported for some char/misc drivers for 5.4-rc7 These all come from the different subsystem/driver maintainers as things that they had reports for and wanted to see fixed. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: intel_th: pci: Add Jasper Lake PCH support intel_th: pci: Add Comet Lake PCH support intel_th: msu: Fix possible memory leak in mode_store() intel_th: msu: Fix overflow in shift of an unsigned int intel_th: msu: Fix missing allocation failure check on a kstrndup intel_th: msu: Fix an uninitialized mutex intel_th: gth: Fix the window switching sequence soundwire: slave: fix scanf format soundwire: intel: fix intel_register_dai PDI offsets and numbers interconnect: Add locking in icc_set_tag() interconnect: qcom: Fix icc_onecell_data allocation soundwire: depend on ACPI || OF soundwire: depend on ACPI thunderbolt: Drop unnecessary read when writing LC command in Ice Lake thunderbolt: Fix lockdep circular locking depedency warning thunderbolt: Read DP IN adapter first two dwords in one go
-
git://git.infradead.org/users/hch/configfsLinus Torvalds authored
Pull configfs regression fix from Christoph Hellwig: "Fix a regression from this merge window in the configfs symlink handling (Honggang Li)" * tag 'configfs-for-5.4-2' of git://git.infradead.org/users/hch/configfs: configfs: calculate the depth of parent item
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A small set of fixes for x86: - Make the tsc=reliable/nowatchdog command line parameter work again. It was broken with the introduction of the early TSC clocksource. - Prevent the evaluation of exception stacks before they are set up. This causes a crash in dumpstack because the stack walk termination gets screwed up. - Prevent a NULL pointer dereference in the rescource control file system. - Avoid bogus warnings about APIC id mismatch related to the LDR which can happen when the LDR is not in use and therefore not initialized. Only evaluate that when the APIC is in logical destination mode" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Respect tsc command line paraemeter for clocksource_tsc_early x86/dumpstack/64: Don't evaluate exception stacks before setup x86/apic/32: Avoid bogus LDR warnings x86/resctrl: Prevent NULL pointer dereference when reading mondata -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A small set of fixes for timekeepoing and clocksource drivers: - VDSO data was updated conditional on the availability of a VDSO capable clocksource. This causes the VDSO functions which do not depend on a VDSO capable clocksource to operate on stale data. Always update unconditionally. - Prevent a double free in the mediatek driver - Use the proper helper in the sh_mtu2 driver so it won't attempt to initialize non-existing interrupts" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping/vsyscall: Update VDSO data unconditionally clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name() clocksource/drivers/mediatek: Fix error handling -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "Two fixes for scheduler regressions: - Plug a subtle race condition which was introduced with the rework of the next task selection functionality. The change of task properties became unprotected which can be observed inconsistently causing state corruption. - A trivial compile fix for CONFIG_CGROUPS=n" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix pick_next_task() vs 'change' pattern race sched/core: Fix compilation error when cgroup not selected -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling fixes from Thomas Gleixner: - Fix the time sorting algorithm which was broken due to truncation of big numbers - Fix the python script generator fail caused by a broken tracepoint array iterator * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Fix time sorting perf tools: Remove unused trace_find_next_event() perf scripting engines: Iterate on tep event arrays directly
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixlet from Thomas Gleixner: "A trivial fix for a kernel doc regression where an argument change was not reflected in the documentation" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull stacktrace fix from Thomas Gleixner: "A small fix for a stacktrace regression. Saving a stacktrace for a foreign task skipped an extra entry which makes e.g. the output of /proc/$PID/stack incomplete" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: stacktrace: Don't skip first entry on noncurrent tasks
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fix from Steve French: "Small fix for an smb3 reconnect bug (also marked for stable)" * tag '5.4-rc7-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6: SMB3: Fix persistent handles reconnect
-
Zhou Yanjie authored
Add process for the situation that more than one irq is coming to a single chip at the same time. The original code will only respond to the lowest setted bit in JZ_REG_INTC_PENDING, and then exit the interrupt dispatch function. After exiting the interrupt dispatch function, since the second interrupt has not yet responded, the interrupt dispatch function is again entered to process the second interrupt. This creates additional unnecessary overhead, and the more interrupts that occur at the same time, the more overhead is added. The improved method in this patch is to check whether there are still unresponsive interrupts after processing the lowest setted bit interrupt. If there are any, the processing will be processed according to the bit in JZ_REG_INTC_PENDING, and the interrupt dispatch function will be exited until all processing is completed. Signed-off-by:
Zhou Yanjie <zhouyanjie@zoho.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/1570015525-27018-6-git-send-email-zhouyanjie@zoho.com
-
Paul Cercueil authored
By creating the generic chips from the IRQ domain, we don't rely on the JZ4740_IRQ_BASE macro. It also makes the code a bit cleaner. Signed-off-by:
-
Paul Cercueil authored
Get the virq number from the IRQ domain instead of calculating it from the hardcoded irq base. Signed-off-by:
-
Paul Cercueil authored
If we cannot create the IRQ domain, the driver should fail to probe instead of succeeding with just a warning message. Signed-off-by:
-
Paul Cercueil authored
The same behaviour can be obtained by using the IRQCHIP_MASK_ON_SUSPEND flag on the IRQ chip. Signed-off-by:
-
Jonathan Neuschäfer authored
Somehow CONFIG_SIFIVE_PLIC ended up outside of the "IRQ chip support" menu. Fixes: 8237f8bc ("irqchip: add a SiFive PLIC driver") Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by:
Palmer Dabbelt <palmer@sifive.com> Acked-by:
-
Marc Zyngier authored
The VLPI map is currently a mutex, and that's a bad idea as this lock can be taken in non-preemptible contexts. Convert it to a raw spinlock, and turn the memory allocation of the VLPI map to be atomic. Reported-by:
Heyi Guo <guoheyi@huawei.com> Signed-off-by:
-
Marc Zyngier authored
Obtaining the mapping ivformation for a VLPI should always be done with the vlpi_lock for this device held. Otherwise, we expose ourselves to races against a concurrent unmap. Signed-off-by:
-
Marc Zyngier authored
We have so far always injected/cleared VLPIs using either INT+SYNC or CLEAR+SYNC sequences, but that's pretty wrong for two reasons: - SYNC only synchronises physical LPIs - The collection ID that for the associated LPI doesn't match the redistributor the vPE is associated with Instead, send an {INT,CLEAR}+VSYNC for forwarded LPIs, ensuring that the ITS synchronises against the virtual pending table. Reported-by:Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
-
Marc Zyngier authored
We have so far alwways invalidated VLPIs usinc an INV+SYNC sequence, but that's pretty wrong for two reasons: - SYNC only synchronises physical LPIs - The collection ID that for the associated LPI doesn't match the redistributor the vPE is associated with Instead, send an INV+VSYNC for forwarded LPIs, ensuring that the ITS can properly synchronise the invalidation of VLPIs. Fixes: 015ec038 ("irqchip/gic-v3-its: Add VLPI configuration handling") Reported-by:
-
Marc Zyngier authored
Obtaining the mapping information for a VLPI is something quite common, and the GICv4.1 code is going to make even more use of it. Expose it as a separate set of helpers. Signed-off-by:
-
Marc Zyngier authored
Now that we have a copy of TYPER in the ITS structure, rely on this to provide the same service as its->device_ids, which gets axed. Errata workarounds are now updating the cached fields instead of requiring a separate field in the ITS structure. Signed-off-by:
-
