- 24 Jan, 2023 12 commits
-
-
Kuniyuki Iwashima authored
syzbot reported a use-after-free in do_accept(), precisely nr_accept() as sk_prot_alloc() allocated the memory and sock_put() frees it. [0] The issue could happen if the heartbeat timer is fired and nr_heartbeat_expiry() calls nr_destroy_socket(), where a socket has SOCK_DESTROY or a listening socket has SOCK_DEAD. In this case, the first condition cannot be true. SOCK_DESTROY is flagged in nr_release() only when the file descriptor is close()d, but accept() is being called for the listening socket, so the second condition must be true. Usually, the AF_NETROM listener neither starts timers nor sets SOCK_DEAD. However, the condition is met if connect() fails before listen(). connect() starts the t1 timer and heartbeat timer, and t1timer calls nr_disconnect() when timeout happens. Then, SOCK_DEAD is set, and if we call listen(), the heartbeat timer calls nr_destroy_socket(). nr_connect nr_establish_data_link(sk) nr_start_t1timer(sk) nr_start_heartbeat(sk) nr_t1timer_expiry nr_disconnect(sk, ETIMEDOUT) nr_sk(sk)->state = NR_STATE_0 sk->sk_state = TCP_CLOSE sock_set_flag(sk, SOCK_DEAD) nr_listen if (sk->sk_state != TCP_LISTEN) sk->sk_state = TCP_LISTEN nr_heartbeat_expiry switch (nr->state) case NR_STATE_0 if (sk->sk_state == TCP_LISTEN && sock_flag(sk, SOCK_DEAD)) nr_destroy_socket(sk) This path seems expected, and nr_destroy_socket() is called to clean up resources. Initially, there was sock_hold() before nr_destroy_socket() so that the socket would not be freed, but the commit 517a16b1 ("netrom: Decrease sock refcount when sock timers expire") accidentally removed it. To fix use-after-free, let's add sock_hold(). [0]: BUG: KASAN: use-after-free in do_accept+0x483/0x510 net/socket.c:1848 Read of size 8 at addr ffff88807978d398 by task syz-executor.3/5315 CPU: 0 PID: 5315 Comm: syz-executor.3 Not tainted 6.2.0-rc3-syzkaller-00165-gd9fc1511 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:306 [inline] print_report+0x15e/0x461 mm/kasan/report.c:417 kasan_report+0xbf/0x1f0 mm/kasan/report.c:517 do_accept+0x483/0x510 net/socket.c:1848 __sys_accept4_file net/socket.c:1897 [inline] __sys_accept4+0x9a/0x120 net/socket.c:1927 __do_sys_accept net/socket.c:1944 [inline] __se_sys_accept net/socket.c:1941 [inline] __x64_sys_accept+0x75/0xb0 net/socket.c:1941 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fa436a8c0c9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fa437784168 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 00007fa436bac050 RCX: 00007fa436a8c0c9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005 RBP: 00007fa436ae7ae9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffebc6700df R14: 00007fa437784300 R15: 0000000000022000 </TASK> Allocated by task 5294: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:371 [inline] ____kasan_kmalloc mm/kasan/common.c:330 [inline] __kasan_kmalloc+0xa3/0xb0 mm/kasan/common.c:380 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slab_common.c:968 [inline] __kmalloc+0x5a/0xd0 mm/slab_common.c:981 kmalloc include/linux/slab.h:584 [inline] sk_prot_alloc+0x140/0x290 net/core/sock.c:2038 sk_alloc+0x3a/0x7a0 net/core/sock.c:2091 nr_create+0xb6/0x5f0 net/netrom/af_netrom.c:433 __sock_create+0x359/0x790 net/socket.c:1515 sock_create net/socket.c:1566 [inline] __sys_socket_create net/socket.c:1603 [inline] __sys_socket_create net/socket.c:1588 [inline] __sys_socket+0x133/0x250 net/socket.c:1636 __do_sys_socket net/socket.c:1649 [inline] __se_sys_socket net/socket.c:1647 [inline] __x64_sys_socket+0x73/0xb0 net/socket.c:1647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 14: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:518 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x13b/0x1a0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:177 [inline] __cache_free mm/slab.c:3394 [inline] __do_kmem_cache_free mm/slab.c:3580 [inline] __kmem_cache_free+0xcd/0x3b0 mm/slab.c:3587 sk_prot_free net/core/sock.c:2074 [inline] __sk_destruct+0x5df/0x750 net/core/sock.c:2166 sk_destruct net/core/sock.c:2181 [inline] __sk_free+0x175/0x460 net/core/sock.c:2192 sk_free+0x7c/0xa0 net/core/sock.c:2203 sock_put include/net/sock.h:1991 [inline] nr_heartbeat_expiry+0x1d7/0x460 net/netrom/nr_timer.c:148 call_timer_fn+0x1da/0x7c0 kernel/time/timer.c:1700 expire_timers+0x2c6/0x5c0 kernel/time/timer.c:1751 __run_timers kernel/time/timer.c:2022 [inline] __run_timers kernel/time/timer.c:1995 [inline] run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035 __do_softirq+0x1fb/0xadc kernel/softirq.c:571 Fixes: 517a16b1 ("netrom: Decrease sock refcount when sock timers expire") Reported-by: syzbot+5fafd5cfe1fc91f6b352@syzkaller.appspotmail.com Signed-off-by:Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230120231927.51711-1-kuniyu@amazon.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-01-20 (iavf) This series contains updates to iavf driver only. Michal Schmidt converts single iavf workqueue to per adapter to avoid deadlock issues. Marcin moves setting of VLAN related netdev features to watchdog task to avoid RTNL deadlock. Stefan Assmann schedules immediate watchdog task execution on changing primary MAC to avoid excessive delay. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: schedule watchdog immediately when changing primary MAC iavf: Move netdev_update_features() into watchdog task iavf: fix temporary deadlock and failure to set MAC address ==================== Link: https://lore.kernel.org/r/20230120211036.430946-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix overlap detection in rbtree set backend: Detect overlap by going through the ordered list of valid tree nodes. To shorten the number of visited nodes in the list, this algorithm descends the tree to search for an existing element greater than the key value to insert that is greater than the new element. 2) Fix for the rbtree set garbage collector: Skip inactive and busy elements when checking for expired elements to avoid interference with an ongoing transaction from control plane. This is a rather large fix coming at this stage of the 6.2-rc. Since 33c7aba0 ("netfilter: nf_tables: do not set up extensions for end interval"), bogus overlap errors in the rbtree set occur more frequently. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_set_rbtree: skip elements in transaction from garbage collection netfilter: nft_set_rbtree: Switch to node list walk for overlap detection ==================== Link: https://lore.kernel.org/r/20230123211601.292930-1-pablo@netfilter.orgSigned-off-by:
-
Mat Martineau authored
My responsibilities at Intel have changed, so I'm handing off exclusive MPTCP subsystem maintainer duties to Matthieu. It has been a privilege to see MPTCP through its initial upstreaming and first few years in the upstream kernel! Acked-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20230120231121.36121-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Alexandru Tachici authored
Driver marked broadcast/multicast frames as offloaded incorrectly. Mark them as offloaded only when HW offloading has been enabled. This should happen only for ADIN2111 when both ports are bridged by the software. Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by:
Alexandru Tachici <alexandru.tachici@analog.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230120090846.18172-1-alexandru.tachici@analog.comSigned-off-by:
-
Ahmad Fatoum authored
Starting with commit eee16b14 ("net: dsa: microchip: perform the compatibility check for dev probed"), the KSZ switch driver now bails out if it thinks the DT compatible doesn't match the actual chip ID read back from the hardware: ksz9477-switch 1-005f: Device tree specifies chip KSZ9893 but found KSZ8563, please fix it! For the KSZ8563, which used ksz_switch_chips[KSZ9893], this was fine at first, because it indeed shares the same chip id as the KSZ9893. Commit b4490809 ("net: dsa: microchip: add separate struct ksz_chip_data for KSZ8563 chip") started differentiating KSZ9893 compatible chips by consulting the 0x1F register. The resulting breakage was fixed for the SPI driver in the same commit by introducing the appropriate ksz_switch_chips[KSZ8563], but not for the I2C driver. Fix this for I2C-connected KSZ8563 now to get it probing again. Fixes: b4490809 ("net: dsa: microchip: add separate struct ksz_chip_data for KSZ8563 chip"). Reviewed-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230120110933.1151054-1-a.fatoum@pengutronix.deSigned-off-by:
-
Eric Dumazet authored
if (!type) continue; if (type > RTAX_MAX) return false; ... fi_val = fi->fib_metrics->metrics[type - 1]; @type being used as an array index, we need to prevent cpu speculation or risk leaking kernel memory content. Fixes: 5f9ae3d9 ("ipv4: do metrics match when looking up and deleting a route") Signed-off-by:Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230120133140.3624204-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
if (!type) continue; if (type > RTAX_MAX) return -EINVAL; ... metrics[type - 1] = val; @type being used as an array index, we need to prevent cpu speculation or risk leaking kernel memory content. Fixes: 6cf9dfd3 ("net: fib: move metrics parsing to a helper") Signed-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== netlink: annotate various data races A recent syzbot report came to my attention. After addressing it, I also fixed other related races. ==================== Link: https://lore.kernel.org/r/20230120125955.3453768-1-edumazet@google.comSigned-off-by:
-
Eric Dumazet authored
netlink_getsockbyportid() reads sk_state while a concurrent netlink_connect() can change its value. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Eric Dumazet authored
netlink_getname(), netlink_sendmsg() and netlink_getsockbyportid() can read nlk->dst_portid and nlk->dst_group while another thread is changing them. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Eric Dumazet authored
syzbot reminds us netlink_getname() runs locklessly [1] This first patch annotates the race against nlk->portid. Following patches take care of the remaining races. [1] BUG: KCSAN: data-race in netlink_getname / netlink_insert write to 0xffff88814176d310 of 4 bytes by task 2315 on cpu 1: netlink_insert+0xf1/0x9a0 net/netlink/af_netlink.c:583 netlink_autobind+0xae/0x180 net/netlink/af_netlink.c:856 netlink_sendmsg+0x444/0x760 net/netlink/af_netlink.c:1895 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2476 ___sys_sendmsg net/socket.c:2530 [inline] __sys_sendmsg+0x19a/0x230 net/socket.c:2559 __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88814176d310 of 4 bytes by task 2316 on cpu 0: netlink_getname+0xcd/0x1a0 net/netlink/af_netlink.c:1144 __sys_getsockname+0x11d/0x1b0 net/socket.c:2026 __do_sys_getsockname net/socket.c:2041 [inline] __se_sys_getsockname net/socket.c:2038 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:2038 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00000000 -> 0xc9a49780 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 2316 Comm: syz-executor.2 Not tainted 6.2.0-rc3-syzkaller-00030-ge8f60cd7-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
- 23 Jan, 2023 6 commits
-
-
Pablo Neira Ayuso authored
Skip interference with an ongoing transaction, do not perform garbage collection on inactive elements. Reset annotated previous end interval if the expired element is marked as busy (control plane removed the element right before expiration). Fixes: 8d8540c4 ("netfilter: nft_set_rbtree: add timeout support") Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
...instead of a tree descent, which became overly complicated in an attempt to cover cases where expired or inactive elements would affect comparisons with the new element being inserted. Further, it turned out that it's probably impossible to cover all those cases, as inactive nodes might entirely hide subtrees consisting of a complete interval plus a node that makes the current insertion not overlap. To speed up the overlap check, descent the tree to find a greater element that is closer to the key value to insert. Then walk down the node list for overlap detection. Starting the overlap check from rb_first() unconditionally is slow, it takes 10 times longer due to the full linear traversal of the list. Moreover, perform garbage collection of expired elements when walking down the node list to avoid bogus overlap reports. For the insertion operation itself, this essentially reverts back to the implementation before commit 7c84d414 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion"), except that cases of complete overlap are already handled in the overlap detection phase itself, which slightly simplifies the loop to find the insertion point. Based on initial patch from Stefano Brivio, including text from the original patch description too. Fixes: 7c84d414 ("netfilter: nft_set_rbtree: Detect partial overlaps on insertion") Reviewed-by:
-
Gergely Risko authored
When proxying IPv6 NDP requests, the adverts to the initial multicast solicits are correct and working. On the other hand, when later a reachability confirmation is requested (on unicast), no reply is sent. This causes the neighbor entry expiring on the sending node, which is mostly a non-issue, as a new multicast request is sent. There are routers, where the multicast requests are intentionally delayed, and in these environments the current implementation causes periodic packet loss for the proxied endpoints. The root cause is the erroneous decrease of the hop limit, as this is checked in ndisc.c and no answer is generated when it's 254 instead of the correct 255. Cc: stable@vger.kernel.org Fixes: 46c7655f ("ipv6: decrease hop limit counter in ip6_forward()") Signed-off-by:
Gergely Risko <gergely.risko@gmail.com> Tested-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vladimir Oltean say: ==================== ethtool support for IEEE 802.3 MAC Merge layer Change log ---------- v3->v4: - add missing opening bracket in ocelot_port_mm_irq() - moved cfg.verify_time range checking so that it actually takes place for the updated rather than old value v3 at: https://patchwork.kernel.org/project/netdevbpf/cover/20230117085947.2176464-1-vladimir.oltean@nxp.com/ v2->v3: - made get_mm return int instead of void - deleted ETHTOOL_A_MM_SUPPORTED - renamed ETHTOOL_A_MM_ADD_FRAG_SIZE to ETHTOOL_A_MM_TX_MIN_FRAG_SIZE - introduced ETHTOOL_A_MM_RX_MIN_FRAG_SIZE - cleaned up documentation - rebased on top of PLCA changes - renamed ETHTOOL_STATS_SRC_* to ETHTOOL_MAC_STATS_SRC_* v2 at: https://patchwork.kernel.org/project/netdevbpf/cover/20230111161706.1465242-1-vladimir.oltean@nxp.com/ v1->v2: I've decided to focus just on the MAC Merge layer for now, which is why I am able to submit this patch set as non-RFC. v1 (RFC) at: https://patchwork.kernel.org/project/netdevbpf/cover/20220816222920.1952936-1-vladimir.oltean@nxp.com/ What is being introduced ------------------------ TL;DR: a MAC Merge layer as defined by IEEE 802.3-2018, clause 99 (interspersing of express traffic). This is controlled through ethtool netlink (ETHTOOL_MSG_MM_GET, ETHTOOL_MSG_MM_SET). The raw ethtool commands are posted here: https://patchwork.kernel.org/project/netdevbpf/cover/20230111153638.1454687-1-vladimir.oltean@nxp.com/ The MAC Merge layer has its own statistics counters (ethtool --include-statistics --show-mm swp0) as well as two member MACs, the statistics of which can be queried individually, through a new ethtool netlink attribute, corresponding to: $ ethtool -I --show-pause eno2 --src aggregate $ ethtool -S eno2 --groups eth-mac eth-phy eth-ctrl rmon -- --src pmac The core properties of the MAC Merge layer are described in great detail in patches 02/12 and 03/12. They can be viewed in "make htmldocs" format. Devices for which the API is supported -------------------------------------- I decided to start with the Ethernet switch on NXP LS1028A (Felix) because of the smaller patch set. I also have support for the ENETC controller pending. I would like to get confirmation that the UAPI being proposed here will not restrict any use cases known by other hardware vendors. Why is support for preemptible traffic classes not here? -------------------------------------------------------- There is legitimate concern whether the 802.1Q portion of the standard (which traffic classes go to the eMAC and which to the pMAC) should be modeled in Linux using tc or using another UAPI. I think that is stalling the entire series, but should be discussed separately instead. Removing FP adminStatus support makes me confident enough to submit this patch set without an RFC tag (meaning: I wouldn't mind if it was merged as is). What is submitted here is sufficient for an LLDP daemon to do its job. I've patched openlldp to advertise and configure frame preemption: https://github.com/vladimiroltean/openlldp/tree/frame-preemption-v3 In case someone wants to try it out, here are some commands I've used. # Configure the interfaces to receive and transmit LLDP Data Units lldptool -L -i eno0 adminStatus=rxtx lldptool -L -i swp0 adminStatus=rxtx # Enable the transmission of certain TLVs on switch's interface lldptool -T -i eno0 -V addEthCap enableTx=yes lldptool -T -i swp0 -V addEthCap enableTx=yes # Query LLDP statistics on switch's interface lldptool -S -i swp0 # Query the received neighbor TLVs lldptool -i swp0 -t -n -V addEthCap Additional Ethernet Capabilities TLV Preemption capability supported Preemption capability enabled Preemption capability active Additional fragment size: 60 octets So using this patch set, lldpad will be able to advertise and configure frame preemption, but still, no data packet will be sent as preemptible over the link, because there is no UAPI to control which traffic classes are sent as preemptible and which as express. Preemptable or preemptible? --------------------------- IEEE 802.3 uses "preemptable" throughout. IEEE 802.1Q uses "preemptible" throughout. Because the definition of "preemptible" falls under 802.1Q's jurisdiction and 802.3 just references it, I went with the 802.1Q naming even where supporting an 802.3 feature. Also, checkpatch agrees with this. ==================== Signed-off-by:
-
Vladimir Oltean authored
Due to the fact that the kernel-side data structures have been carried over from the ioctl-based ethtool, we are now in the situation where we have an ethnl_update_bool32() function, but the plain function that operates on a boolean value kept in an actual u8 netlink attribute doesn't exist. With new ethtool features that are exposed solely over netlink, the kernel data structures will use the "bool" type, so we will need this kind of helper. Introduce it now; it's needed for things like verify-disabled for the MAC merge configuration. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Wei Fang authored
The page_pool_release_page was used when freeing rx buffers, and this function just unmaps the page (if mapped) and does not recycle the page. So after hundreds of down/up the eth0, the system will out of memory. For more details, please refer to the following reproduce steps and bug logs. To solve this issue and refer to the doc of page pool, the page_pool_put_full_page should be used to replace page_pool_release_page. Because this API will try to recycle the page if the page refcnt equal to 1. After testing 20000 times, the issue can not be reproduced anymore (about testing 391 times the issue will occur on i.MX8MN-EVK before). Reproduce steps: Create the test script and run the script. The script content is as follows: LOOPS=20000 i=1 while [ $i -le $LOOPS ] do echo "TINFO:ENET $curface up and down test $i times" org_macaddr=$(cat /sys/class/net/eth0/address) ifconfig eth0 down ifconfig eth0 hw ether $org_macaddr up i=$(expr $i + 1) done sleep 5 if cat /sys/class/net/eth0/operstate | grep 'up';then echo "TEST PASS" else echo "TEST FAIL" fi Bug detail logs: TINFO:ENET up and down test 391 times [ 850.471205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 853.535318] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 853.541694] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 870.590531] page_pool_release_retry() stalled pool shutdown 199 inflight 60 sec [ 931.006557] page_pool_release_retry() stalled pool shutdown 199 inflight 120 sec TINFO:ENET up and down test 392 times [ 991.426544] page_pool_release_retry() stalled pool shutdown 192 inflight 181 sec [ 1051.838531] page_pool_release_retry() stalled pool shutdown 170 inflight 241 sec [ 1093.751217] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1096.446520] page_pool_release_retry() stalled pool shutdown 308 inflight 60 sec [ 1096.831245] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1096.839092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1112.254526] page_pool_release_retry() stalled pool shutdown 103 inflight 302 sec [ 1156.862533] page_pool_release_retry() stalled pool shutdown 308 inflight 120 sec [ 1172.674516] page_pool_release_retry() stalled pool shutdown 103 inflight 362 sec [ 1217.278532] page_pool_release_retry() stalled pool shutdown 308 inflight 181 sec TINFO:ENET up and down test 393 times [ 1233.086535] page_pool_release_retry() stalled pool shutdown 103 inflight 422 sec [ 1277.698513] page_pool_release_retry() stalled pool shutdown 308 inflight 241 sec [ 1293.502525] page_pool_release_retry() stalled pool shutdown 86 inflight 483 sec [ 1338.110518] page_pool_release_retry() stalled pool shutdown 308 inflight 302 sec [ 1353.918540] page_pool_release_retry() stalled pool shutdown 32 inflight 543 sec [ 1361.179205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1364.255298] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1364.263189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1371.998532] page_pool_release_retry() stalled pool shutdown 310 inflight 60 sec [ 1398.530542] page_pool_release_retry() stalled pool shutdown 308 inflight 362 sec [ 1414.334539] page_pool_release_retry() stalled pool shutdown 16 inflight 604 sec [ 1432.414520] page_pool_release_retry() stalled pool shutdown 310 inflight 120 sec [ 1458.942523] page_pool_release_retry() stalled pool shutdown 308 inflight 422 sec [ 1474.750521] page_pool_release_retry() stalled pool shutdown 16 inflight 664 sec TINFO:ENET up and down test 394 times [ 1492.830522] page_pool_release_retry() stalled pool shutdown 310 inflight 181 sec [ 1519.358519] page_pool_release_retry() stalled pool shutdown 308 inflight 483 sec [ 1535.166545] page_pool_release_retry() stalled pool shutdown 2 inflight 724 sec [ 1537.090278] eth_test2.sh invoked oom-killer: gfp_mask=0x400dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO), order=0, oom_score_adj=0 [ 1537.101192] CPU: 3 PID: 2379 Comm: eth_test2.sh Tainted: G C 6.1.1+g56321e101aca #1 [ 1537.110249] Hardware name: NXP i.MX8MNano EVK board (DT) [ 1537.115561] Call trace: [ 1537.118005] dump_backtrace.part.0+0xe0/0xf0 [ 1537.122289] show_stack+0x18/0x40 [ 1537.125608] dump_stack_lvl+0x64/0x80 [ 1537.129276] dump_stack+0x18/0x34 [ 1537.132592] dump_header+0x44/0x208 [ 1537.136083] oom_kill_process+0x2b4/0x2c0 [ 1537.140097] out_of_memory+0xe4/0x594 [ 1537.143766] __alloc_pages+0xb68/0xd00 [ 1537.147521] alloc_pages+0xac/0x160 [ 1537.151013] __get_free_pages+0x14/0x40 [ 1537.154851] pgd_alloc+0x1c/0x30 [ 1537.158082] mm_init+0xf8/0x1d0 [ 1537.161228] mm_alloc+0x48/0x60 [ 1537.164368] alloc_bprm+0x7c/0x240 [ 1537.167777] do_execveat_common.isra.0+0x70/0x240 [ 1537.172486] __arm64_sys_execve+0x40/0x54 [ 1537.176502] invoke_syscall+0x48/0x114 [ 1537.180255] el0_svc_common.constprop.0+0xcc/0xec [ 1537.184964] do_el0_svc+0x2c/0xd0 [ 1537.188280] el0_svc+0x2c/0x84 [ 1537.191340] el0t_64_sync_handler+0xf4/0x120 [ 1537.195613] el0t_64_sync+0x18c/0x190 [ 1537.199334] Mem-Info: [ 1537.201620] active_anon:342 inactive_anon:10343 isolated_anon:0 [ 1537.201620] active_file:54 inactive_file:112 isolated_file:0 [ 1537.201620] unevictable:0 dirty:0 writeback:0 [ 1537.201620] slab_reclaimable:2620 slab_unreclaimable:7076 [ 1537.201620] mapped:1489 shmem:2473 pagetables:466 [ 1537.201620] sec_pagetables:0 bounce:0 [ 1537.201620] kernel_misc_reclaimable:0 [ 1537.201620] free:136672 free_pcp:96 free_cma:129241 [ 1537.240419] Node 0 active_anon:1368kB inactive_anon:41372kB active_file:216kB inactive_file:5052kB unevictable:0kB isolated(anon):0kB isolated(file):0kB s [ 1537.271422] Node 0 DMA free:541636kB boost:0kB min:30000kB low:37500kB high:45000kB reserved_highatomic:0KB active_anon:1368kB inactive_anon:41372kB actiB [ 1537.300219] lowmem_reserve[]: 0 0 0 0 [ 1537.303929] Node 0 DMA: 1015*4kB (UMEC) 743*8kB (UMEC) 417*16kB (UMEC) 235*32kB (UMEC) 116*64kB (UMEC) 25*128kB (UMEC) 4*256kB (UC) 2*512kB (UC) 0*1024kBB [ 1537.323938] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB [ 1537.332708] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB [ 1537.341292] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB [ 1537.349776] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB [ 1537.358087] 2939 total pagecache pages [ 1537.361876] 0 pages in swap cache [ 1537.365229] Free swap = 0kB [ 1537.368147] Total swap = 0kB [ 1537.371065] 516096 pages RAM [ 1537.373959] 0 pages HighMem/MovableOnly [ 1537.377834] 17302 pages reserved [ 1537.381103] 163840 pages cma reserved [ 1537.384809] 0 pages hwpoisoned [ 1537.387902] Tasks state (memory values in pages): [ 1537.392652] [ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name [ 1537.401356] [ 201] 993 201 1130 72 45056 0 0 rpcbind [ 1537.409772] [ 202] 0 202 4529 1640 77824 0 -250 systemd-journal [ 1537.418861] [ 222] 0 222 4691 801 69632 0 -1000 systemd-udevd [ 1537.427787] [ 248] 994 248 20914 130 65536 0 0 systemd-timesyn [ 1537.436884] [ 497] 0 497 620 31 49152 0 0 atd [ 1537.444938] [ 500] 0 500 854 77 53248 0 0 crond [ 1537.453165] [ 503] 997 503 1470 160 49152 0 -900 dbus-daemon [ 1537.461908] [ 505] 0 505 633 24 40960 0 0 firmwared [ 1537.470491] [ 513] 0 513 2507 180 61440 0 0 ofonod [ 1537.478800] [ 514] 990 514 69640 137 81920 0 0 parsec [ 1537.487120] [ 533] 0 533 599 39 40960 0 0 syslogd [ 1537.495518] [ 534] 0 534 4546 148 65536 0 0 systemd-logind [ 1537.504560] [ 535] 0 535 690 24 45056 0 0 tee-supplicant [ 1537.513564] [ 540] 996 540 2769 168 61440 0 0 systemd-network [ 1537.522680] [ 566] 0 566 3878 228 77824 0 0 connmand [ 1537.531168] [ 645] 998 645 1538 133 57344 0 0 avahi-daemon [ 1537.540004] [ 646] 998 646 1461 64 57344 0 0 avahi-daemon [ 1537.548846] [ 648] 992 648 781 41 45056 0 0 rpc.statd [ 1537.557415] [ 650] 64371 650 590 23 45056 0 0 ninfod [ 1537.565754] [ 653] 61563 653 555 24 45056 0 0 rdisc [ 1537.573971] [ 655] 0 655 374569 2999 290816 0 -999 containerd [ 1537.582621] [ 658] 0 658 1311 20 49152 0 0 agetty [ 1537.590922] [ 663] 0 663 1529 97 49152 0 0 login [ 1537.599138] [ 666] 0 666 3430 202 69632 0 0 wpa_supplicant [ 1537.608147] [ 667] 0 667 2344 96 61440 0 0 systemd-userdbd [ 1537.617240] [ 677] 0 677 2964 314 65536 0 100 systemd [ 1537.625651] [ 679] 0 679 3720 646 73728 0 100 (sd-pam) [ 1537.634138] [ 687] 0 687 1289 403 45056 0 0 sh [ 1537.642108] [ 789] 0 789 970 93 45056 0 0 eth_test2.sh [ 1537.650955] [ 2355] 0 2355 2346 94 61440 0 0 systemd-userwor [ 1537.660046] [ 2356] 0 2356 2346 94 61440 0 0 systemd-userwor [ 1537.669137] [ 2358] 0 2358 2346 95 57344 0 0 systemd-userwor [ 1537.678258] [ 2379] 0 2379 970 93 45056 0 0 eth_test2.sh [ 1537.687098] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/user.slice/user-0.slice/user@0.service,tas0 [ 1537.703009] Out of memory: Killed process 679 ((sd-pam)) total-vm:14880kB, anon-rss:2584kB, file-rss:0kB, shmem-rss:0kB, UID:0 pgtables:72kB oom_score_ad0 [ 1553.246526] page_pool_release_retry() stalled pool shutdown 310 inflight 241 sec Fixes: 95698ff6 ("net: fec: using page pool to manage RX buffers") Signed-off-by:Wei Fang <wei.fang@nxp.com> Reviewed-by:
shenwei wang <Shenwei.wang@nxp.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
- 21 Jan, 2023 4 commits
-
-
Paolo Abeni authored
If net_assign_generic() fails, the current error path in ops_init() tries to clear the gen pointer slot. Anyway, in such error path, the gen pointer itself has not been modified yet, and the existing and accessed one is smaller than the accessed index, causing an out-of-bounds error: BUG: KASAN: slab-out-of-bounds in ops_init+0x2de/0x320 Write of size 8 at addr ffff888109124978 by task modprobe/1018 CPU: 2 PID: 1018 Comm: modprobe Not tainted 6.2.0-rc2.mptcp_ae5ac65fbed5+ #1641 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6a/0x9f print_address_description.constprop.0+0x86/0x2b5 print_report+0x11b/0x1fb kasan_report+0x87/0xc0 ops_init+0x2de/0x320 register_pernet_operations+0x2e4/0x750 register_pernet_subsys+0x24/0x40 tcf_register_action+0x9f/0x560 do_one_initcall+0xf9/0x570 do_init_module+0x190/0x650 load_module+0x1fa5/0x23c0 __do_sys_finit_module+0x10d/0x1b0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f42518f778d Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d cb 56 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff96869688 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 00005568ef7f7c90 RCX: 00007f42518f778d RDX: 0000000000000000 RSI: 00005568ef41d796 RDI: 0000000000000003 RBP: 00005568ef41d796 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 00005568ef7f7d30 R14: 0000000000040000 R15: 0000000000000000 </TASK> This change addresses the issue by skipping the gen pointer de-reference in the mentioned error-path. Found by code inspection and verified with explicit error injection on a kasan-enabled kernel. Fixes: d266935a ("net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed") Signed-off-by:Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/cec4e0f3bb2c77ac03a6154a8508d3930beb5f0f.1674154348.git.pabeni@redhat.comSigned-off-by:
-
Yoshihiro Shimoda authored
If one of ports in the ethernet-ports was disabled, this driver failed to probe all ports. So, fix it. Fixes: 3590918b ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20230120001959.1059850-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Haiyang Zhang authored
The PCI and queue number info is missing in IRQ names. Add PCI and queue number to IRQ names, to allow CPU affinity tuning scripts to work. Cc: stable@vger.kernel.org Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
-
Eric Dumazet authored
Most netlink attributes are parsed and validated from __nla_validate_parse() or validate_nla() u16 type = nla_type(nla); if (type == 0 || type > maxtype) { /* error or continue */ } @type is then used as an array index and can be used as a Spectre v1 gadget. array_index_nospec() can be used to prevent leaking content of kernel memory to malicious users. This should take care of vast majority of netlink uses, but an audit is needed to take care of others where validation is not yet centralized in core netlink functions. Fixes: bfa83a9e ("[NETLINK]: Type-safe netlink messages/attributes interface") Signed-off-by:
-
- 20 Jan, 2023 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, bluetooth, bpf and netfilter. Current release - regressions: - Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf", fix nsna_ping mode of team - wifi: mt76: fix bugs in Rx queue handling and DMA mapping - eth: mlx5: - add missing mutex_unlock in error reporter - protect global IPsec ASO with a lock Current release - new code bugs: - rxrpc: fix wrong error return in rxrpc_connect_call() Previous releases - regressions: - bluetooth: hci_sync: fix use of HCI_OP_LE_READ_BUFFER_SIZE_V2 - wifi: - mac80211: fix crashes on Rx due to incorrect initialization of rx->link and rx->link_sta - mac80211: fix bugs in iTXQ conversion - Tx stalls, incorrect aggregation handling, crashes - brcmfmac: fix regression for Broadcom PCIe wifi devices - rndis_wlan: prevent buffer overflow in rndis_query_oid - netfilter: conntrack: handle tcp challenge acks during connection reuse - sched: avoid grafting on htb_destroy_class_offload when destroying - virtio-net: correctly enable callback during start_xmit, fix stalls - tcp: avoid the lookup process failing to get sk in ehash table - ipa: disable ipa interrupt during suspend - eth: stmmac: enable all safety features by default Previous releases - always broken: - bpf: - fix pointer-leak due to insufficient speculative store bypass mitigation (Spectre v4) - skip task with pid=1 in send_signal_common() to avoid a splat - fix BPF program ID information in BPF_AUDIT_UNLOAD as well as PERF_BPF_EVENT_PROG_UNLOAD events - fix potential deadlock in htab_lock_bucket from same bucket index but different map_locked index - bluetooth: - fix a buffer overflow in mgmt_mesh_add() - hci_qca: fix driver shutdown on closed serdev - ISO: fix possible circular locking dependency - CIS: hci_event: fix invalid wait context - wifi: brcmfmac: fixes for survey dump handling - mptcp: explicitly specify sock family at subflow creation time - netfilter: nft_payload: incorrect arithmetics when fetching VLAN header bits - tcp: fix rate_app_limited to default to 1 - l2tp: close all race conditions in l2tp_tunnel_register() - eth: mlx5: fixes for QoS config and eswitch configuration - eth: enetc: avoid deadlock in enetc_tx_onestep_tstamp() - eth: stmmac: fix invalid call to mdiobus_get_phy() Misc: - ethtool: add netlink attr in rss get reply only if the value is not empty" * tag 'net-6.2-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) Revert "Merge branch 'octeontx2-af-CPT'" tcp: fix rate_app_limited to default to 1 bnxt: Do not read past the end of test names net: stmmac: enable all safety features by default octeontx2-af: add mbox to return CPT_AF_FLT_INT info octeontx2-af: update cpt lf alloc mailbox octeontx2-af: restore rxc conf after teardown sequence octeontx2-af: optimize cpt pf identification octeontx2-af: modify FLR sequence for CPT octeontx2-af: add mbox for CPT LF reset octeontx2-af: recover CPT engine when it gets fault net: dsa: microchip: ksz9477: port map correction in ALU table entry register selftests/net: toeplitz: fix race on tpacket_v3 block close net/ulp: use consistent error code when blocking ULP octeontx2-pf: Fix the use of GFP_KERNEL in atomic context on rt tcp: avoid the lookup process failing to get sk in ehash table Revert "net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf" MAINTAINERS: add networking entries for Willem net: sched: gred: prevent races when adding offloads to stats l2tp: prevent lockdep issue in l2tp_tunnel_register() ... -
Stefan Assmann authored
iavf_replace_primary_mac() utilizes queue_work() to schedule the watchdog task but that only ensures that the watchdog task is queued to run. To make sure the watchdog is executed asap use mod_delayed_work(). Without this patch it may take up to 2s until the watchdog task gets executed, which may cause long delays when setting the MAC address. Fixes: a3e839d5 ("iavf: Add usage of new virtchnl format to set default MAC") Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Reviewed-by:
Michal Schmidt <mschmidt@redhat.com> Tested-by:
Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Marcin Szycik authored
Remove netdev_update_features() from iavf_adminq_task(), as it can cause deadlocks due to needing rtnl_lock. Instead use the IAVF_FLAG_SETUP_NETDEV_FEATURES flag to indicate that netdev features need to be updated in the watchdog task. iavf_set_vlan_offload_features() and iavf_set_queue_vlan_tag_loc() can be called directly from iavf_virtchnl_completion(). Suggested-by:
Phani Burra <phani.r.burra@intel.com> Signed-off-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by:
Marek Szlosek <marek.szlosek@intel.com> Signed-off-by:
-
Michal Schmidt authored
We are seeing an issue where setting the MAC address on iavf fails with EAGAIN after the 2.5s timeout expires in iavf_set_mac(). There is the following deadlock scenario: iavf_set_mac(), holding rtnl_lock, waits on: iavf_watchdog_task (within iavf_wq) to send a message to the PF, and iavf_adminq_task (within iavf_wq) to receive a response from the PF. In this adapter state (>=__IAVF_DOWN), these tasks do not need to take rtnl_lock, but iavf_wq is a global single-threaded workqueue, so they may get stuck waiting for another adapter's iavf_watchdog_task to run iavf_init_config_adapter(), which does take rtnl_lock. The deadlock resolves itself by the timeout in iavf_set_mac(), which results in EAGAIN returned to userspace. Let's break the deadlock loop by changing iavf_wq into a per-adapter workqueue, so that one adapter's tasks are not blocked by another's. Fixes: 35a2443d ("iavf: Add waiting for response from PF in set mac") Co-developed-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Jakub Kicinski authored
This reverts commit b4fbf0b2, reversing changes made to 6c977c5c. This seems like net-next material. Signed-off-by:
-
David Morley authored
The initial default value of 0 for tp->rate_app_limited was incorrect, since a flow is indeed application-limited until it first sends data. Fixing the default to be 1 is generally correct but also specifically will help user-space applications avoid using the initial tcpi_delivery_rate value of 0 that persists until the connection has some non-zero bandwidth sample. Fixes: eb8329e0 ("tcp: export data delivery rate") Suggested-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David Morley <morleyd@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Tested-by:
-
Kees Cook authored
Test names were being concatenated based on a offset beyond the end of the first name, which tripped the buffer overflow detection logic: detected buffer overflow in strnlen [...] Call Trace: bnxt_ethtool_init.cold+0x18/0x18 Refactor struct hwrm_selftest_qlist_output to use an actual array, and adjust the concatenation to use snprintf() rather than a series of strncat() calls. Reported-by:
Niklas Cassel <Niklas.Cassel@wdc.com> Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/Tested-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
-
Andrew Halaney authored
In the original implementation of dwmac5 commit 8bf993a5 ("net: stmmac: Add support for DWMAC5 and implement Safety Features") all safety features were enabled by default. Later it seems some implementations didn't have support for all the features, so in commit 5ac712dc ("net: stmmac: enable platform specific safety features") the safety_feat_cfg structure was added to the callback and defined for some platforms to selectively enable these safety features. The problem is that only certain platforms were given that software support. If the automotive safety package bit is set in the hardware features register the safety feature callback is called for the platform, and for platforms that didn't get a safety_feat_cfg defined this results in the following NULL pointer dereference: [ 7.933303] Call trace: [ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac] [ 7.941455] __stmmac_open+0x16c/0x474 [stmmac] [ 7.946117] stmmac_open+0x38/0x70 [stmmac] [ 7.950414] __dev_open+0x100/0x1dc [ 7.954006] __dev_change_flags+0x18c/0x204 [ 7.958297] dev_change_flags+0x24/0x6c [ 7.962237] do_setlink+0x2b8/0xfa4 [ 7.965827] __rtnl_newlink+0x4ec/0x840 [ 7.969766] rtnl_newlink+0x50/0x80 [ 7.973353] rtnetlink_rcv_msg+0x12c/0x374 [ 7.977557] netlink_rcv_skb+0x5c/0x130 [ 7.981500] rtnetlink_rcv+0x18/0x2c [ 7.985172] netlink_unicast+0x2e8/0x340 [ 7.989197] netlink_sendmsg+0x1a8/0x420 [ 7.993222] ____sys_sendmsg+0x218/0x280 [ 7.997249] ___sys_sendmsg+0xac/0x100 [ 8.001103] __sys_sendmsg+0x84/0xe0 [ 8.004776] __arm64_sys_sendmsg+0x24/0x30 [ 8.008983] invoke_syscall+0x48/0x114 [ 8.012840] el0_svc_common.constprop.0+0xcc/0xec [ 8.017665] do_el0_svc+0x38/0xb0 [ 8.021071] el0_svc+0x2c/0x84 [ 8.024212] el0t_64_sync_handler+0xf4/0x120 [ 8.028598] el0t_64_sync+0x190/0x194 Go back to the original behavior, if the automotive safety package is found to be supported in hardware enable all the features unless safety_feat_cfg is passed in saying this particular platform only supports a subset of the features. Fixes: 5ac712dc ("net: stmmac: enable platform specific safety features") Reported-by:
Ning Cai <ncai@quicinc.com> Signed-off-by:
Andrew Halaney <ahalaney@redhat.com> Signed-off-by:
-
David S. Miller authored
Srujana Challa says: ==================== octeontx2-af: Miscellaneous changes for CPT This patchset consists of miscellaneous changes for CPT. - Adds a new mailbox to reset the requested CPT LF. - Modify FLR sequence as per HW team suggested. - Adds support to recover CPT engines when they gets fault. - Updates CPT inbound inline IPsec configuration mailbox, as per new generation of the OcteonTX2 chips. - Adds a new mailbox to return CPT FLT Interrupt info. --- v2: - Addressed a review comment. v1: - Dropped patch "octeontx2-af: Fix interrupt name strings completely" to submit to net. --- ==================== Signed-off-by: -
Srujana Challa authored
CPT HW would trigger the CPT AF FLT interrupt when CPT engines hits some uncorrectable errors and AF is the one which receives the interrupt and recovers the engines. This patch adds a mailbox for CPT VFs to request for CPT faulted and recovered engines info. Signed-off-by:
Srujana Challa <schalla@marvell.com> Signed-off-by:
-
Srujana Challa authored
The CN10K CPT coprocessor contains a context processor to accelerate updates to the IPsec security association contexts. The context processor contains a context cache. This patch updates CPT LF ALLOC mailbox to config ctx_ilen requested by VFs. CPT_LF_ALLOC:ctx_ilen is the size of initial context fetch. Signed-off-by:
-
Nithin Dabilpuram authored
CN10K CPT coprocessor includes a component named RXC which is responsible for reassembly of inner IP packets. RXC has the feature to evict oldest entries based on age/threshold. The age/threshold is being set to minimum values to evict all entries at the time of teardown. This patch adds code to restore timeout and threshold config after teardown sequence is complete as it is global config. Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
-
Srujana Challa authored
Optimize CPT PF identification in mbox handling for faster mbox response by doing it at AF driver probe instead of every mbox message. Signed-off-by:
-
Srujana Challa authored
On OcteonTX2 platform CPT instruction enqueue is only possible via LMTST operations. The existing FLR sequence mentioned in HRM requires a dummy LMTST to CPT but LMTST can't be submitted from AF driver. So, HW team provided a new sequence to avoid dummy LMTST. This patch adds code for the same. Signed-off-by:
-
Srujana Challa authored
On OcteonTX2 SoC, the admin function (AF) is the only one with all priviliges to configure HW and alloc resources, PFs and it's VFs have to request AF via mailbox for all their needs. This patch adds a new mailbox for CPT VFs to request for CPT LF reset. Signed-off-by:
-
Srujana Challa authored
When CPT engine has uncorrectable errors, it will get halted and must be disabled and re-enabled. This patch adds code for the same. Signed-off-by:
-
- 19 Jan, 2023 2 commits
-
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Prevent reading into undefined memory in the expression lexer, accounting for a trailer backslash followed by the null byte. - Fix file mode when copying files to the build id cache, the problem happens when the cache directory is in a different file system than the file being cached, otherwise the mode was preserved as only a hard link would be done to save space. - Fix a related build-id 'perf test' entry that checked that permission when caching PE (Portable Executable) files, used when profiling Windows executables under wine. - Sync the tools/ copies of kvm headers, build_bug.h, socket.h and arm64's cputype.h with the kernel sources. * tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf test build-id: Fix test check for PE file perf buildid-cache: Fix the file mode with copyfile() while adding file to build-id cache perf expr: Prevent normalize() from reading into undefined memory in the expression lexer tools headers: Syncronize linux/build_bug.h with the kernel sources perf beauty: Update copy of linux/socket.h with the kernel sources tools headers arm64: Sync arm64's cputype.h with the kernel sources tools kvm headers arm64: Update KVM header from the kernel sources tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources
-
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linuxLinus Torvalds authored
Pull printk fixes from Petr Mladek: - Prevent a potential deadlock when configuring kgdb console - Fix a kernel doc warning * tag 'printk-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: kernel/printk/printk.c: Fix W=1 kernel-doc warning tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
-
