- 02 May, 2019 2 commits
-
-
Martin Schwidefsky authored
The assembler version of the expoline thunk use the naming __s390x_indirect_jump_rxuse_ry while the compiler generates names like __s390_indirect_jump_rx_use_ry. Make the naming more consistent. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Martin Schwidefsky authored
The assembler code in arch/s390 misses proper ENDPROC statements to properly end functions in a few places. Add them. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
- 29 Apr, 2019 34 commits
-
-
Gerald Schaefer authored
The following warning occurred on s390: WARNING: CPU: 0 PID: 804 at kernel/locking/lockdep.c:1025 lockdep_register_key+0x30/0x150 This is because the check in static_obj() assumes that all memory within [_stext, _end] belongs to static objects, which at least for s390 isn't true. The init section is also part of this range, and freeing it allows the buddy allocator to allocate memory from it. We have virt == phys for the kernel on s390, so that such allocations would then have addresses within the range [_stext, _end]. To fix this, introduce arch_is_kernel_initmem_freed(), similar to arch_is_kernel_text/data(), and add it to the checks in static_obj(). This will always return 0 on architectures that do not define arch_is_kernel_initmem_freed. On s390, it will return 1 if initmem has been freed and the address is in the range [__init_begin, __init_end]. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Gerald Schaefer authored
This patch adds support for relocating the kernel to a random address. The random kernel offset is obtained from cpacf, using either TRNG, PRNO, or KMC_PRNG, depending on supported MSA level. KERNELOFFSET is added to vmcoreinfo, for crash --kaslr support. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Gerald Schaefer authored
With a relocatable kernel that could reside at any place in memory, code and data that has to stay below 2 GB needs special handling. This patch introduces .dma sections for such text, data and ex_table. The sections will be part of the decompressor kernel, so they will not be relocated and stay below 2 GB. Their location is passed over to the decompressed / relocated kernel via the .boot.preserved.data section. The duald and aste for control register setup also need to stay below 2 GB, so move the setup code from arch/s390/kernel/head64.S to arch/s390/boot/head.S. The duct and linkage_stack could reside above 2 GB, but their content has to be preserved for the decompresed kernel, so they are also moved into the .dma section. The start and end address of the .dma sections is added to vmcoreinfo, for crash support, to help debugging in case the kernel crashed there. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Gerald Schaefer authored
The sccbs for init/read/sdias/early have to be located below 2 GB, and they are currently defined as a static buffer. With a relocatable kernel that could reside at any place in memory, this will no longer guarantee the location below 2 GB, so use a dynamic GFP_DMA allocation instead. The sclp_early_sccb buffer needs special handling, as it can be used very early, and by both the decompressor and also the decompressed kernel. Therefore, a fixed 4 KB buffer is introduced at 0x11000, the former PARMAREA_END. The new PARMAREA_END is now 0x12000, and it is renamed to HEAD_END, as it is rather the end of head.S and not the end of the parmarea. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Gerald Schaefer authored
With a relocatable kernel that could reside at any place in memory, the current logic for allocating a kprobes insn_page does not work. The GFP_DMA allocated buffer might be more than 2 GB away from the kernel. Use a static buffer for the insn_page instead. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Gerald Schaefer authored
With a relocatable kernel that could reside at any place in memory, the storage size for the SYSCALL and PGM_CHECK handlers needs to be increased from .long to .quad. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Gerald Schaefer authored
This patch adds support for building a relocatable kernel with -fPIE. The kernel will be relocated to 0 early in the boot process. Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Allow for userspace to use PCI MIO instructions. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Allow users to disable usage of MIO instructions by specifying pci=nomio at the kernel command line. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Provide support for PCI I/O instructions that work on mapped IO addresses. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
ISM devices are special in how they access PCI memory space. Provide wrappers for handling commands to the device. No functional change. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
This is a preparation patch for usage of new pci instructions. No functional change. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Provide a kernel parameter to force the usage of floating interrupts. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Gather statistics to distinguish floating and directed interrupts. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Improve /proc/interrupts on s390 to show statistics for individual MSI interrupts. Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Up until now all interrupts on s390 have been floating. For MSI interrupts we've used a global summary bit vector (with a bit for each function) and a per-function interrupt bit vector (with a bit per MSI). This patch introduces a new IRQ delivery mode: CPU directed interrupts. In this new mode a per-CPU interrupt bit vector is used (with a bit per MSI per function). Further it is now possible to direct an IRQ to a specific CPU so we can finally support IRQ affinity. If an interrupt can't be delivered because the appointed CPU is occupied by a hypervisor the interrupt is delivered floating. For this a global summary bit vector is used (with a bit per CPU). Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Provide the ability to create cachesize aligned interrupt vectors. These will be used for per-CPU interrupt vectors. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Rename and clarify the usage of the interrupt bit vectors. Also change the array of the per-function bit vectors to be dynamically allocated. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Add an extra parameter for airq handlers to recognize floating vs. directed interrupts. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Detect the adapter CPU directed interruption facility. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Move everything interrupt related from pci.c to pci_irq.c. No functional change. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
No users of pr_debug in that file. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
No point to keep that around. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Philipp Rudo authored
Provide an interface for userspace so it can find out if a machine is capeable of doing secure boot. The interface is, for example, needed for zipl so it can find out which file format it can/should write to disk. Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Philipp Rudo authored
A kernel loaded via kexec_load cannot be verified. Thus disable kexec_load systemcall in kernels which where IPLed securely. Use the IMA mechanism to do so. Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Philipp Rudo authored
Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Philipp Rudo authored
Add kernel signature verification to kexec_file. The verification is based on module signature verification and works with kernel images signed via scripts/sign-file. Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Philipp Rudo authored
The leading 64 kB of a kernel image doesn't contain any data needed to boot the new kernel when it was loaded via kexec_file. Thus kexec_file currently strips them off before loading the image. Keep the leading 64 kB in order to be able to pass a ipl_report to the next kernel. Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Philipp Rudo authored
s390_image_load and s390_elf_load have the same code to load the different components. Combine this functionality in one shared function. While at it move kexec_file_update_kernel into the new function as well. Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Philipp Rudo authored
Access the parmarea in head.S via a struct instead of individual offsets. While at it make the fields in the parmarea .quads. Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Philipp Rudo authored
Omit use of script/bin2c hack. Directly include into assembler file instead. Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Philipp Rudo authored
The purgatory is compiled into the vmlinux and keept in memory all the time during runtime. Thus any section not needed to load the purgatory unnecessarily bloats up its foot print in file- and memorysize. Reduce the purgatory size by stripping the unneeded sections from the purgatory. This reduces the purgatories size by ~33%. Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Philipp Rudo authored
To register data for the next kernel (command line, oldmem_base, etc.) the current kernel needs to find the ELF segment that contains head.S. This is currently done by checking ifor 'phdr->p_paddr == 0'. This works fine for the current kernel build but in theory the first few pages could be skipped. Make the detection more robust by checking if the entry point lies within the segment. Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Philipp Rudo authored
When loading an ELF image via kexec_file the segment alignment is ignored in the calculation for the load address of the next segment. When there are multiple segments this can lead to segment overlap and thus load failure. Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Fixes: 8be01882 ("s390/kexec_file: Add ELF loader") Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
- 26 Apr, 2019 4 commits
-
-
Philipp Rudo authored
With git commit 1e941d39 "s390: move ipl block to .boot.preserved.data section" the earl_ipl_block got renamed to ipl_block and became publicly available via boot_data.h. This might cause problems with zcore, which has it's own ipl_block variable. Thus rename the ipl_block in zcore to prevent name collision and highlight that it's only used locally. Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Fixes: 1e941d39 ("s390: move ipl block to .boot.preserved.data section") Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Martin Schwidefsky authored
In order to be able to sign the bzImage independent of the block size of the IPL device, align the bzImage to 4096 bytes. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Martin Schwidefsky authored
PR: Adjusted to the use in kexec_file later. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Martin Schwidefsky authored
Read the IPL Report block provided by secure-boot, add the entries of the certificate list to the system key ring and print the list of components. PR: Adjust to Vasilys bootdata_preserved patch set. Preserve ipl_cert_list for later use in kexec_file. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-