- 09 Mar, 2012 18 commits
-
-
Gavin Shan authored
The original EEH implementation is heavily depending on struct pci_dn. We have to put EEH related information to pci_dn. Actually, we could split struct pci_dn so that the EEH sensitive information to form an individual struct, then EEH looks more independent. The patch replaces pci_dn with eeh_dev for EEH aux components like event and driver. Also, the eeh_event struct has been adjusted for a little bit since eeh_dev has linked the associated FDT (Flat Device Tree) node and PCI device. It's not necessary for eeh_event struct to trace FDT node and PCI device. We can just simply to trace eeh_dev in eeh_event. The patch also renames function pcid_name() to eeh_pcid_name(), which should be missed in the previous patch where the EEH aux components have been cleaned up. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Gavin Shan authored
The original EEH implementation is heavily depending on struct pci_dn. We have to put EEH related information to pci_dn. Actually, we could split struct pci_dn so that the EEH sensitive information to form an individual struct, then EEH looks more independent. The patch replaces pci_dn with eeh_dev for EEH core. Signed-off-by:
-
Gavin Shan authored
With original EEH implementation, struct pci_dn is used while building PCI I/O address cache, which helps on searching the corresponding PCI device according to the given physical I/O address. Besides, pci_dn is associated with the corresponding PCI device while building its I/O cache. The patch replaces struct pci_dn with struct eeh_dev so that EEH address cache won't depend on struct pci_dn. That will help EEH to become an independent module in future. Besides, the binding of eeh_dev and PCI device is done while building PCI device I/O cache. Signed-off-by:
-
Gavin Shan authored
With original EEH implementation, all EEH related statistics have been put into struct pci_dn. We've introduced struct eeh_dev to replace struct pci_dn in EEH core components, including EEH sysfs component. The patch shows EEH statistics from struct eeh_dev instead of struct pci_dn in EEH sysfs component. Besides, it also fixed the EEH device retrieval from PCI device, which was introduced by the previous patch in the series of patch. Signed-off-by:
-
Gavin Shan authored
Original EEH implementation depends on struct pci_dn heavily. However, EEH shouldn't depend on that actually because EEH needn't share much information with other PCI components. That's to say, EEH should have worked independently. The patch introduces struct eeh_dev so that EEH core components needn't be working based on struct pci_dn in future. Also, struct pci_dn, struct eeh_dev instances are created in dynamic fasion and the binding with EEH device, OF node, PCI device is implemented as well. The EEH devices are created after PHBs are detected and initialized, but PCI emunation hasn't started yet. Apart from that, PHB might be created dynamically through DLPAR component and the EEH devices should be creatd as well. Another case might be OF node is created dynamically by DR (Dynamic Reconfiguration), which has been defined by PAPR. For those OF nodes created by DR, EEH devices should be also created accordingly. The binding between EEH device and OF node is done while the EEH device is initially created. The binding between EEH device and PCI device should be done after PCI emunation is done. Besides, PCI hotplug also needs the binding so that the EEH devices could be traced from the newly coming PCI buses or PCI devices. Signed-off-by:
-
Gavin Shan authored
The patch does some cleanup on the function names of EEH aux components. Currently, only couple of function names from eeh_cache have been adjusted so that: * The function name has prefix "eeh_addr_cache". * Move around pci_addr_cache_build() in the header file to reflect function call sequence. Signed-off-by: -
Gavin Shan authored
There're several EEH aux components and the patch does some cleanup for them so that they look more clean. * Duplicated comments have been removed from the header file. * Comments have been reorganized so that it looks more clean. * The leading comments of functions are adjusted for a little bit so that the result of "make pdfdocs" would be more unified. * Function calls "xxx ()" has been replaced by "xxx()". Signed-off-by: -
Gavin Shan authored
In order to enable particular PCI device, which has been included in the parent PE. The involved PCI bridges should be enabled explicitly if there has. On pSeries platform, there're dedicated RTAS calls to fulfil the purpose. The patch implements the function of configuring PCI bridges through the dedicated RTAS calls. Besides, the function has been abstracted by struct eeh_ops::configure_bridge so that the EEH core components could support multiple platforms in future. Signed-off-by:
-
Gavin Shan authored
On RTAS compliant pSeries platform, one dedicated RTAS call has been introduced to retrieve EEH temporary or permanent error log. The patch implements the function of retriving EEH error log through RTAS call. Besides, it has been abstracted by struct eeh_ops::get_log so that EEH core components could support multiple platforms in future. Signed-off-by:
-
Gavin Shan authored
On RTAS compliant pSeries platform, there is a dedicated RTAS call (ibm,set-slot-reset) to reset the specified PE. Furthermore, two types of resets are supported: hot and fundamental. the type of reset is to be used actually depends on the included PCI device's requirements. The patch implements resetting PE on pSeries platform through RTAS call. Besides, it has been abstracted through struct eeh_ops::reset so that EEH core components could support multiple platforms in future. Signed-off-by:
-
Gavin Shan authored
On pSeries platform, the PE state might be temporarily unavailable. In that case, the firmware will return the corresponding wait time. That means the kernel has to wait for appropriate time in order to get the PE state. The patch does the implementation for that. Besides, the function has been abstracted through struct eeh_ops::wait_state so that EEH core components could support multiple platforms in future. Signed-off-by:
-
Gavin Shan authored
On pSeries platform, there're 2 dedicated RTAS calls introduced to retrieve the corresponding PE's state: ibm,read-slot-reset-state and ibm,read-slot-reset-state2. The patch implements the retrieval of PE's state according to the given PE address. Besides, the implementation has been abstracted by struct eeh_ops::get_state so that EEH core components could support multiple platforms in future. Signed-off-by:
-
Gavin Shan authored
There're 2 types of addresses used for EEH operations. The first one would be BDF (Bus/Device/Function) address which is retrieved from the reg property of the corresponding FDT node. Another one is PE address that should be enquired from firmware through RTAS call on pSeries platform. When issuing EEH operation, the PE address has precedence over BDF address. The patch implements retrieving PE address according to the given BDF address on pSeries platform. Also, the struct eeh_early_enable_info has been removed since the information can be figured out from dn->pdn->phb->buid directly and that simplifies the code. Signed-off-by:
-
Gavin Shan authored
There're 4 EEH operations that are covered by the dedicated RTAS call <ibm,set-eeh-option>: enable or disable EEH, enable MMIO and enable DMA. At early stage of system boot, the EEH would be tried to enable on PCI device related device node. MMIO and DMA for particular PE should be enabled when doing recovery on EEH errors so that the PE could function properly again. The patch implements it and abstract that through struct eeh_ops::set_eeh. It would be help for EEH to support multiple platforms in future. Signed-off-by:
-
Gavin Shan authored
The platform specific EEH operations have been abstracted by struct eeh_ops. The individual platroms, including pSeries, needs doing necessary initialization before the platform dependent EEH operations work properly. The patch is addressing that and do necessary platform initialization for pSeries platform. More specificly, it will figure out the tokens of EEH related RTAS calls. Signed-off-by:
-
Gavin Shan authored
EEH has been implemented on RTAS-compliant pSeries platform. That's to say, the EEH operations will be implemented through RTAS calls eventually. The situation limited feasible extension on EEH. In order to support EEH on multiple platforms like pseries and powernv simutaneously. We have to split the platform dependent EEH options up out of current implementation. The patch addresses supporting EEH on multiple platforms. The pseries platform dependent EEH operations will be abstracted by struct eeh_ops. EEH core components will be built based on the registered EEH operations. With the mechanism, what the individual platform needs to do is implement platform dependent EEH operations. For now, the pseries platform is covered under the mechanism. That means we have to think about other platforms to support EEH, like powernv. Besides, we only have framework for the mechanism and we have to implement it for pseries platform later. Signed-off-by:
-
Gavin Shan authored
The EEH has been implemented on pSeries platform. The original code looks a little bit nasty. The patch does cleanup on the current EEH implementation so that it looks more clean. * Try adding prefix "eeh" for functions. * Some function names have been adjusted so that they looks shorter and meaningful. Signed-off-by: -
Gavin Shan authored
The EEH has been implemented on pSeries platform. The original code looks a little bit nasty. The patch does cleanup on the current EEH implementation so that it looks more clean. * Duplicated comments have been removed from the corresponding header files. * Comments have been reorganized so that it looks more clean. * The leading comments of functions are adjusted for a little bit so that the result of "make pdfdocs" would be more unified. * Function definitions and calls have unified format as "xxx()". That means the format "xxx ()" has been replaced by "xxx()". * There're multiple functions implemented for resetting PE. The position of those functions have been move around so that they are adjacent to each other to reflect their relationship. Signed-off-by:
-
- 08 Mar, 2012 7 commits
-
-
Stephen Rothwell authored
This cleans up vio.c after the removal of the legacy iSeries platform. It also removes some no longer referenced include files. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Stephen Rothwell authored
The PowerPC legacy iSeries plateform is being removed along with the "one looney iseries driver", so this code can now be removed as well. cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Stephen Rothwell authored
The PowerPC legacy iSeries platform is being removed so this is no longer selectable. Cc: Alan Cox <alan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Signed-off-by:
-
Stephen Rothwell authored
The PowerPC legacy iSeries platform is being removed, so this code is no longer needed. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Stephen Rothwell authored
The PowerPC legacy iSeries platform is being removed and this code is no longer selectable. There is more clean up that can be done, but this just gets the old code out of the way. Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Stephen Rothwell authored
This driver is specific to the PowerPC legcay iSeries platform which is being removed. Cc: David Miller <davem@davemloft.net> Cc: <netdev@vger.kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
-
- 07 Mar, 2012 8 commits
-
-
Akinobu Mita authored
- Use memchr_inv to check if the data contains all 0xFF bytes. It is faster than looping for each byte. - Use memcmp to compare memory areas Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
-
Grant Likely authored
All IRQs on powerpc are managed via irq_domain anyway, there isn't really any advantage to turning SPARSE_IRQ off, and it's the direction we want to take the kernel design anyway. This patch makes powerpc always use SPARSE_IRQ. On pseries_defconfig, SPARSE_IRQ adds only about 0x300 bytes to the .text sections, and removes about 0x20000 from the data section for the static irq_desc table. Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Ben Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Nishanth Aravamudan authored
On a 16TB system (using AMS/CMO), I get: WARNING: ignoring large property [/ibm,dynamic-reconfiguration-memory] ibm,dynamic-memory length 0x000000000017ffec and significantly less memory is thus shown to the partition. As far as I can tell, the constant used is arbitrary. Ben Herrenschmidt provided additional background that > The limit was originally set because of Apple machines carrying ROM > images in the device-tree, at a time where we were much more memory > constrained than we are now. and that it is likely not very useful any longer. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Cc: Oleg Nesterov <oleg@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Joe Perches authored
Emit the function name not the address when possible. builtin_return_address() gives an address. When building a kernel with CONFIG_KALLSYMS, emit the actual function name not the address. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Jimi Xenidis authored
There is a race where a thread causes a coprocessor type to be valid in its own ACOP _and_ in the current context, but it does not propagate to the ACOP register of other threads in time for them to use it. The original code tries to solve this by sending an IPI to all threads on the system, which is heavy handed, but unfortunately still provides a window where the icswx is issued by other threads and the ACOP is not up to date. This patch detects that the ACOP DSI fault was a "false positive" and syncs the ACOP and causes the icswx to be replayed. Signed-off-by:
Jimi Xenidis <jimix@pobox.com> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Anton Blanchard authored
Implement atomic_inc_not_zero and atomic64_inc_not_zero. At the moment we use atomic*_add_unless which requires us to put 0 and 1 constants into registers. We can also avoid a subtract by saving the original value in a second temporary. This removes 3 instructions from fget: - c0000000001b63c0: 39 00 00 00 li r8,0 - c0000000001b63c4: 39 40 00 01 li r10,1 ... - c0000000001b63e8: 7c 0a 00 50 subf r0,r10,r0 Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Anton Blanchard authored
We want to implement a ppc64 specific version of atomic_inc_not_zero so wrap it in an ifdef to allow it to be overridden. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
- 27 Feb, 2012 7 commits
-
-
Ira Snyder authored
When the system is under heavy load, we occasionally saw a problem where the system would get a legitimate interrupt when they should be disabled. This was caused by the data_dma_cb() DMA callback unconditionally re-enabling FPGA interrupts even when data dumping is disabled. When data dumping was re-enabled, the irq handler would fire while a DMA was in progress. The "BUG_ON(priv->inflight != NULL);" during the second invocation of the DMA callback caused the system to crash. To fix the issue, the priv->enabled boolean is moved under the protection of the priv->lock spinlock. The DMA callback checks the boolean to know whether to re-enable FPGA interrupts before it returns. Now that it is fixed, the driver keeps FPGA interrupts disabled when it expects that they are disabled, fixing the bug. Signed-off-by:
Ira W. Snyder <iws@ovro.caltech.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Ira Snyder authored
Lockdep occasionally complains with the message: INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected This is caused by calling videobuf_dma_unmap() under spin_lock_irq(). To fix the warning, we drop the lock before unmapping and freeing the buffer. Signed-off-by:
-
Masanari Iida authored
Fix typo "unsuported" to "unsupported" in drivers/machintosh/mediabay.c Signed-off-by: Masanari Iida<standby24x7@gmail.com> Signed-off-by: -
Danny Kukawka authored
arch/powerpc/platforms/powernv/setup.c: included 'asm/xics.h' twice, remove the duplicate. Signed-off-by:
Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by:
-
Danny Kukawka authored
arch/powerpc/kvm/book3s_hv.c: included 'linux/sched.h' twice, remove the duplicate. Signed-off-by:
-
Stephen Rothwell authored
After this, we can remove the legacy iSeries code more easily. Signed-off-by:
-
Benjamin Herrenschmidt authored
When using a multi-ISU MPIC, we can interrupts up to isu_size * MPIC_MAX_ISU, not just isu_size, so allocate the right size reverse map. Without this, the code will constantly fallback to a linear search. Signed-off-by:
-
