- 30 Aug, 2022 1 commit
-
-
Ajay.Kathat@microchip.com authored
Sometimes 'wilc_sdio_cmd53' is called with addresses pointing to an object on the stack. Use dynamically allocated memory for cmd53 instead of stack address which is not DMA'able. Fixes: 5625f965 ("wilc1000: move wilc driver out of staging") Reported-by:
Michael Walle <mwalle@kernel.org> Suggested-by:
Ajay Singh <ajay.kathat@microchip.com> Reviewed-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220809075749.62752-1-ajay.kathat@microchip.com
-
- 26 Aug, 2022 2 commits
-
-
Deren Wu authored
In case of drv own fail in reset, we may need to run mac_reset several times. The sequence would trigger system crash as the log below. Because we do not re-enable/schedule "tx_napi" before disable it again, the process would keep waiting for state change in napi_diable(). To avoid the problem and keep status synchronize for each run, goto final resource handling if drv own failed. [ 5857.353423] mt7921e 0000:3b:00.0: driver own failed [ 5858.433427] mt7921e 0000:3b:00.0: Timeout for driver own [ 5859.633430] mt7921e 0000:3b:00.0: driver own failed [ 5859.633444] ------------[ cut here ]------------ [ 5859.633446] WARNING: CPU: 6 at kernel/kthread.c:659 kthread_park+0x11d [ 5859.633717] Workqueue: mt76 mt7921_mac_reset_work [mt7921_common] [ 5859.633728] RIP: 0010:kthread_park+0x11d/0x150 [ 5859.633736] RSP: 0018:ffff8881b676fc68 EFLAGS: 00010202 ...... [ 5859.633766] Call Trace: [ 5859.633768] <TASK> [ 5859.633771] mt7921e_mac_reset+0x176/0x6f0 [mt7921e] [ 5859.633778] mt7921_mac_reset_work+0x184/0x3a0 [mt7921_common] [ 5859.633785] ? mt7921_mac_set_timing+0x520/0x520 [mt7921_common] [ 5859.633794] ? __kasan_check_read+0x11/0x20 [ 5859.633802] process_one_work+0x7ee/0x1320 [ 5859.633810] worker_thread+0x53c/0x1240 [ 5859.633818] kthread+0x2b8/0x370 [ 5859.633824] ? process_one_work+0x1320/0x1320 [ 5859.633828] ? kthread_complete_and_exit+0x30/0x30 [ 5859.633834] ret_from_fork+0x1f/0x30 [ 5859.633842] </TASK> Cc: stable@vger.kernel.org Fixes: 0efaf31d ("mt76: mt7921: fix MT7921E reset failure") Signed-off-by:
Deren Wu <deren.wu@mediatek.com> Link: https://lore.kernel.org/r/727eb5ffd3c7c805245e512da150ecf0a7154020.1659452909.git.deren.wu@mediatek.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessDavid S. Miller authored
Johannes Berg says: ==================== pull-request: wireless-2022-08-26 Here are a couple of fixes for the current cycle, see the tag description below. Just a couple of fixes: * two potential leaks * use-after-free in certain scan races * warning in IBSS code * error return from a debugfs file was wrong * possible NULL-ptr-deref when station lookup fails Please pull and let me know if there's any problem. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
- 25 Aug, 2022 23 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from ipsec and netfilter (with one broken Fixes tag). Current release - new code bugs: - dsa: don't dereference NULL extack in dsa_slave_changeupper() - dpaa: fix <1G ethernet on LS1046ARDB - neigh: don't call kfree_skb() under spin_lock_irqsave() Previous releases - regressions: - r8152: fix the RX FIFO settings when suspending - dsa: microchip: keep compatibility with device tree blobs with no phy-mode - Revert "net: macsec: update SCI upon MAC address change." - Revert "xfrm: update SA curlft.use_time", comply with RFC 2367 Previous releases - always broken: - netfilter: conntrack: work around exceeded TCP receive window - ipsec: fix a null pointer dereference of dst->dev on a metadata dst in xfrm_lookup_with_ifid - moxa: get rid of asymmetry in DMA mapping/unmapping - dsa: microchip: make learning configurable and keep it off while standalone - ice: xsk: prohibit usage of non-balanced queue id - rxrpc: fix locking in rxrpc's sendmsg Misc: - another chunk of sysctl data race silencing" * tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) net: lantiq_xrx200: restore buffer if memory allocation failed net: lantiq_xrx200: fix lock under memory pressure net: lantiq_xrx200: confirm skb is allocated before using net: stmmac: work around sporadic tx issue on link-up ionic: VF initial random MAC address if no assigned mac ionic: fix up issues with handling EAGAIN on FW cmds ionic: clear broken state on generation change rxrpc: Fix locking in rxrpc's sendmsg net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2 MAINTAINERS: rectify file entry in BONDING DRIVER i40e: Fix incorrect address type for IPv6 flow rules ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter net: Fix a data-race around sysctl_somaxconn. net: Fix a data-race around netdev_unregister_timeout_secs. net: Fix a data-race around gro_normal_batch. net: Fix data-races around sysctl_devconf_inherit_init_net. net: Fix data-races around sysctl_fb_tunnels_only_for_init_net. net: Fix a data-race around netdev_budget_usecs. net: Fix data-races around sysctl_max_skb_frags. net: Fix a data-race around netdev_budget. ... -
Jakub Kicinski authored
Aleksander Jan Bajkowski says: ==================== net: lantiq_xrx200: fix errors under memory pressure This series fixes issues that can occur in the driver under memory pressure. Situations when the system cannot allocate memory are rare, so the mentioned bugs have been fixed recently. The patches have been tested on a BT Home router with the Lantiq xRX200 chipset. Changelog: v3: - removed netdev_err() log from the first patch v2: - the second patch has been changed, so that under memory pressure situation the driver will not receive packets indefinitely regardless of the NAPI budget, - the third patch has been added. ==================== Link: https://lore.kernel.org/r/20220824215408.4695-1-olek2@wp.plSigned-off-by:Jakub Kicinski <kuba@kernel.org>
-
Aleksander Jan Bajkowski authored
In a situation where memory allocation fails, an invalid buffer address is stored. When this descriptor is used again, the system panics in the build_skb() function when accessing memory. Fixes: 7ea6cd16 ("lantiq: net: fix duplicated skb in rx descriptor ring") Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
-
Aleksander Jan Bajkowski authored
When the xrx200_hw_receive() function returns -ENOMEM, the NAPI poll function immediately returns an error. This is incorrect for two reasons: * the function terminates without enabling interrupts or scheduling NAPI, * the error code (-ENOMEM) is returned instead of the number of received packets. After the first memory allocation failure occurs, packet reception is locked due to disabled interrupts from DMA.. Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by:
-
Aleksander Jan Bajkowski authored
xrx200_hw_receive() assumes build_skb() always works and goes straight to skb_reserve(). However, build_skb() can fail under memory pressure. Add a check in case build_skb() failed to allocate and return NULL. Fixes: e0155935 ("net: lantiq_xrx200: convert to build_skb") Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Heiner Kallweit authored
This is a follow-up to the discussion in [0]. It seems to me that at least the IP version used on Amlogic SoC's sometimes has a problem if register MAC_CTRL_REG is written whilst the chip is still processing a previous write. But that's just a guess. Adding a delay between two writes to this register helps, but we can also simply omit the offending second write. This patch uses the second approach and is based on a suggestion from Qi Duan. Benefit of this approach is that we can save few register writes, also on not affected chip versions. [0] https://www.spinics.net/lists/netdev/msg831526.html Fixes: bfab27a1 ("stmmac: add the experimental PCI support") Suggested-by:
Qi Duan <qi.duan@amlogic.com> Suggested-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/e99857ce-bd90-5093-ca8c-8cd480b5a0a2@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-24 (ixgbe, i40e) This series contains updates to ixgbe and i40e drivers. Jake stops incorrect resetting of SYSTIME registers when starting cyclecounter for ixgbe. Sylwester corrects a check on source IP address when validating destination for i40e. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix incorrect address type for IPv6 flow rules ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter ==================== Link: https://lore.kernel.org/r/20220824193748.874343-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Shannon Nelson says: ==================== ionic: bug fixes These are a couple of maintenance bug fixes for the Pensando ionic networking driver. Mohamed takes care of a "plays well with others" issue where the VF spec is a bit vague on VF mac addresses, but certain customers have come to expect behavior based on other vendor drivers. Shannon addresses a couple of corner cases seen in internal stress testing. ==================== Link: https://lore.kernel.org/r/20220824165051.6185-1-snelson@pensando.ioSigned-off-by:
-
R Mohamed Shah authored
Assign a random mac address to the VF interface station address if it boots with a zero mac address in order to match similar behavior seen in other VF drivers. Handle the errors where the older firmware does not allow the VF to set its own station address. Newer firmware will allow the VF to set the station mac address if it hasn't already been set administratively through the PF. Setting it will also be allowed if the VF has trust. Fixes: fbb39807 ("ionic: support sr-iov operations") Signed-off-by:
R Mohamed Shah <mohamed@pensando.io> Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
In looping on FW update tests we occasionally see the FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop waiting for the FW activate step to finsh inside the FW. The firmware is complaining that the done bit is set when a new dev_cmd is going to be processed. Doing a clean on the cmd registers and doorbell before exiting the wait-for-done and cleaning the done bit before the sleep prevents this from occurring. Fixes: fbfb8031 ("ionic: Add hardware init and device commands") Signed-off-by:
-
Shannon Nelson authored
There is a case found in heavy testing where a link flap happens just before a firmware Recovery event and the driver gets stuck in the BROKEN state. This comes from the driver getting interrupted by a FW generation change when coming back up from the link flap, and the call to ionic_start_queues() in ionic_link_status_check() fails. This can be addressed by having the fw_up code clear the BROKEN bit if seen, rather than waiting for a user to manually force the interface down and then back up. Fixes: 9e8eaf84 ("ionic: stop watchdog when in broken state") Signed-off-by:
-
David Howells authored
Fix three bugs in the rxrpc's sendmsg implementation: (1) rxrpc_new_client_call() should release the socket lock when returning an error from rxrpc_get_call_slot(). (2) rxrpc_wait_for_tx_window_intr() will return without the call mutex held in the event that we're interrupted by a signal whilst waiting for tx space on the socket or relocking the call mutex afterwards. Fix this by: (a) moving the unlock/lock of the call mutex up to rxrpc_send_data() such that the lock is not held around all of rxrpc_wait_for_tx_window*() and (b) indicating to higher callers whether we're return with the lock dropped. Note that this means recvmsg() will not block on this call whilst we're waiting. (3) After dropping and regaining the call mutex, rxrpc_send_data() needs to go and recheck the state of the tx_pending buffer and the tx_total_len check in case we raced with another sendmsg() on the same call. Thinking on this some more, it might make sense to have different locks for sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating that a call is dead before a sendmsg() to that call returns - but that can currently happen anyway. Without fix (2), something like the following can be induced: WARNING: bad unlock balance detected! 5.16.0-rc6-syzkaller #0 Not tainted ------------------------------------- syz-executor011/3597 is trying to release lock (&call->user_mutex) at: [<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 but there are no more locks to release! other info that might help us debug this: no locks held by syz-executor011/3597. ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline] __lock_release kernel/locking/lockdep.c:5306 [inline] lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657 __mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900 rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae [Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this] Fixes: bc5e3a54 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Reported-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com Signed-off-by:David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Tested-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com cc: Hawkins Jiawei <yin31149@gmail.com> cc: Khalid Masum <khalid.masum.92@gmail.com> cc: Dan Carpenter <dan.carpenter@oracle.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166135894583.600315.7170979436768124075.stgit@warthog.procyon.org.ukSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull another cgroup fix from Tejun Heo: "Commit 4f7e7236 ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") required the cgroup core to grab cpus_read_lock() before invoking ->attach(). Unfortunately, it missed adding cpus_read_lock() in cgroup_attach_task_all(). Fix it" * tag 'cgroup-for-6.0-rc2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all()
-
Tetsuo Handa authored
syzbot is hitting percpu_rwsem_assert_held(&cpu_hotplug_lock) warning at cpuset_attach() [1], for commit 4f7e7236 ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") missed that cpuset_attach() is also called from cgroup_attach_task_all(). Add cpus_read_lock() like what cgroup_procs_write_start() does. Link: https://syzkaller.appspot.com/bug?extid=29d3a3b4d86c8136ad9e [1] Reported-by:
syzbot <syzbot+29d3a3b4d86c8136ad9e@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 4f7e7236 ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Lorenzo Bianconi authored
Properly report hw rx hash for mt7986 chipset accroding to the new dma descriptor layout. Fixes: 197c9e9b ("net: ethernet: mtk_eth_soc: introduce support for mt7986 chipset") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/091394ea4e705fbb35f828011d98d0ba33808f69.1661257293.git.lorenzo@kernel.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Dan Carpenter authored
The ieee80211_lookup_ra_sta() function will sometimes set "sta" to NULL so add this NULL check to prevent an Oops. Fixes: 9dd19538 ("wifi: nl80211/mac80211: clarify link ID in control port TX") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YuKcTAyO94YOy0Bu@kiliSigned-off-by:
-
Dan Carpenter authored
The return type is supposed to be ssize_t, which is signed long, but "r" was declared as unsigned int. This means that on 64 bit systems we return positive values instead of negative error codes. Fixes: 80a3511d ("cfg80211: add debugfs HT40 allow map") Signed-off-by:
-
Siddh Raman Pant authored
When we are not connected to a channel, sending channel "switch" announcement doesn't make any sense. The BSS list is empty in that case. This causes the for loop in cfg80211_get_bss() to be bypassed, so the function returns NULL (check line 1424 of net/wireless/scan.c), causing the WARN_ON() in ieee80211_ibss_csa_beacon() to get triggered (check line 500 of net/mac80211/ibss.c), which was consequently reported on the syzkaller dashboard. Thus, check if we have an existing connection before generating the CSA beacon in ieee80211_ibss_finish_csa(). Cc: stable@vger.kernel.org Fixes: cd7760e6 ("mac80211: add support for CSA in IBSS mode") Link: https://syzkaller.appspot.com/bug?id=05603ef4ae8926761b678d2939a3b2ad28ab9ca6 Reported-by: syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com Signed-off-by:
Siddh Raman Pant <code@siddh.me> Tested-by: syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20220814151512.9985-1-code@siddh.meSigned-off-by:
-
Yang Yingliang authored
Add missing dev_kfree_skb() in an error path in ieee80211_tx_control_port() to avoid a memory leak. Fixes: dd820ed6 ("wifi: mac80211: return error from control port TX for drops") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220818043349.4168835-1-yangyingliang@huawei.comSigned-off-by:
-
Lorenzo Bianconi authored
Free sta pointer in __sta_info_alloc routine if sta_info_alloc_link() fails. Fixes: 246b39e4 ("wifi: mac80211: refactor some sta_info link handling") Signed-off-by:
-
Siddh Raman Pant authored
ieee80211_scan_rx() tries to access scan_req->flags after a null check, but a UAF is observed when the scan is completed and __ieee80211_scan_completed() executes, which then calls cfg80211_scan_done() leading to the freeing of scan_req. Since scan_req is rcu_dereference()'d, prevent the racing in __ieee80211_scan_completed() by ensuring that from mac80211's POV it is no longer accessed from an RCU read critical section before we call cfg80211_scan_done(). Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?extid=f9acff9bf08a845f225d Reported-by: syzbot+f9acff9bf08a845f225d@syzkaller.appspotmail.com Suggested-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix crash with malformed ebtables blob which do not provide all entry points, from Florian Westphal. 2) Fix possible TCP connection clogging up with default 5-days timeout in conntrack, from Florian. 3) Fix crash in nf_tables tproxy with unsupported chains, also from Florian. 4) Do not allow to update implicit chains. 5) Make table handle allocation per-netns to fix data race. 6) Do not truncated payload length and offset, and checksum offset. Instead report EINVAl. 7) Enable chain stats update via static key iff no error occurs. 8) Restrict osf expression to ip, ip6 and inet families. 9) Restrict tunnel expression to netdev family. 10) Fix crash when trying to bind again an already bound chain. 11) Flowtable garbage collector might leave behind pending work to delete entries. This patch comes with a previous preparation patch as dependency. 12) Allow net.netfilter.nf_conntrack_frag6_high_thresh to be lowered, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_defrag_ipv6: allow nf_conntrack_frag6_high_thresh increases netfilter: flowtable: fix stuck flows on cleanup due to pending work netfilter: flowtable: add function to invoke garbage collection immediately netfilter: nf_tables: disallow binding to already bound chain netfilter: nft_tunnel: restrict it to netdev family netfilter: nft_osf: restrict osf to ipv4, ipv6 and inet families netfilter: nf_tables: do not leave chain stats enabled on error netfilter: nft_payload: do not truncate csum_offset and csum_type netfilter: nft_payload: report ERANGE for too long offset and length netfilter: nf_tables: make table handle allocation per-netns friendly netfilter: nf_tables: disallow updates of implicit chain netfilter: nft_tproxy: restrict to prerouting hook netfilter: conntrack: work around exceeded receive window netfilter: ebtables: reject blobs that don't provide all entry points ==================== Link: https://lore.kernel.org/r/20220824220330.64283-1-pablo@netfilter.orgSigned-off-by: -
Lukas Bulwahn authored
Commit c078290a ("selftests: include bonding tests into the kselftest infra") adds the bonding tests in the directory: tools/testing/selftests/drivers/net/bonding/ The file entry in MAINTAINERS for the BONDING DRIVER however refers to: tools/testing/selftests/net/bonding/ Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken file pattern. Repair this file entry in BONDING DRIVER. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by:
Jonathan Toppins <jtoppins@redhat.com> Link: https://lore.kernel.org/r/20220824072945.28606-1-lukas.bulwahn@gmail.comSigned-off-by:
-
- 24 Aug, 2022 14 commits
-
-
Sylwester Dziedziuch authored
It was not possible to create 1-tuple flow director rule for IPv6 flow type. It was caused by incorrectly checking for source IP address when validating user provided destination IP address. Fix this by changing ip6src to correct ip6dst address in destination IP address validation for IPv6 flow type. Fixes: efca91e8 ("i40e: Add flow director support for IPv6") Signed-off-by:
Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jacob Keller authored
The ixgbe_ptp_start_cyclecounter is intended to be called whenever the cyclecounter parameters need to be changed. Since commit a9763f3c ("ixgbe: Update PTP to support X550EM_x devices"), this function has cleared the SYSTIME registers and reset the TSAUXC DISABLE_SYSTIME bit. While these need to be cleared during ixgbe_ptp_reset, it is wrong to clear them during ixgbe_ptp_start_cyclecounter. This function may be called during both reset and link status change. When link changes, the SYSTIME counter is still operating normally, but the cyclecounter should be updated to account for the possibly changed parameters. Clearing SYSTIME when link changes causes the timecounter to jump because the cycle counter now reads zero. Extract the SYSTIME initialization out to a new function and call this during ixgbe_ptp_reset. This prevents the timecounter adjustment and avoids an unnecessary reset of the current time. This also restores the original SYSTIME clearing that occurred during ixgbe_ptp_reset before the commit above. Reported-by:
Steve Payne <spayne@aurora.tech> Reported-by:
Ilya Evenbach <ievenbach@aurora.tech> Fixes: a9763f3c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: - Fix build warning for when MODULES and FTRACE_WITH_DIRECT_CALLS are not set. A warning happens with ops_references_rec() defined but not used. * tag 'trace-v6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix build warning for ops_references_rec() not used
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
Pull dmi update from Jean Delvare. Tiny cleanup. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: firmware: dmi: Use the proper accessor for the version field
-
David S. Miller authored
Kuniyuki Iwashima says: ==================== net: sysctl: Fix data-races around net.core.XXX This series fixes data-races around all knobs in net_core_table and netns_core_table except for bpf stuff. These knobs are skipped: - 4 bpf knobs - netdev_rss_key: Written only once by net_get_random_once() and read-only knob - rps_sock_flow_entries: Protected with sock_flow_mutex - flow_limit_cpu_bitmap: Protected with flow_limit_update_mutex - flow_limit_table_len: Protected with flow_limit_update_mutex - default_qdisc: Protected with qdisc_mod_lock - warnings: Unused - high_order_alloc_disable: Protected with static_key_mutex - skb_defer_max: Already using READ_ONCE() - sysctl_txrehash: Already using READ_ONCE() Note 5th patch fixes net.core.message_cost and net.core.message_burst, and lib/ratelimit.c does not have an explicit maintainer. Changes: v3: * Fix build failures of CONFIG_SYSCTL=n case in 13th & 14th patches v2: https://lore.kernel.org/netdev/20220818035227.81567-1-kuniyu@amazon.com/ * Remove 4 bpf knobs and added 6 knobs v1: https://lore.kernel.org/netdev/20220816052347.70042-1-kuniyu@amazon.com/ ==================== Signed-off-by: -
Kuniyuki Iwashima authored
While reading sysctl_somaxconn, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Kuniyuki Iwashima authored
While reading netdev_unregister_timeout_secs, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 5aa3afe1 ("net: make unregister netdev warning timeout configurable") Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Kuniyuki Iwashima authored
While reading gro_normal_batch, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 323ebb61 ("net: use listified RX for handling GRO_NORMAL skbs") Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_devconf_inherit_init_net, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 856c395c ("net: introduce a knob to control whether to inherit devconf config") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_fb_tunnels_only_for_init_net, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 79134e6c ("net: do not create fallback tunnels for non-default namespaces") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading netdev_budget_usecs, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 7acf8a1e ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_max_skb_frags, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 5f74f82e ("net:Add sysctl_max_skb_frags") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading netdev_budget, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 51b0bded ("[NET]: Separate two usages of netdev_max_backlog.") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_net_busy_read, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 2d48d67f ("net: poll/select low latency socket support") Signed-off-by:
-
