Avoid flushing caches in __flush_cache_page() and __purge_cache_page()
if the machine hasn't data or instruction caches - as e.g. in qemu.
Signed-off-by: Helge Deller <deller@gmx.de>

This patch changes the kprobe and kretprobe feature to use another
break instruction instead of relying on the hardware single-step
feature.
That way those kprobes now work in qemu as well, because in qemu we
don't emulate yet single-stepping.
Signed-off-by: Helge Deller <deller@gmx.de>

Improve CPU bootup info text from:
 CPU1: thread -1, cpu 0, socket 1
to
 CPU1: cpu core 0 of socket 1
Signed-off-by: Helge Deller <deller@gmx.de>

Allow to enable page table boot-up checks.
Suggested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>

At least the qemu virtual machine does not provide D- and I-caches,
so skip triggering SMP irqs to flush caches on such machines.

Further optimize the caching code by using static branches and making
some functions static.
Signed-off-by: Helge Deller <deller@gmx.de>

In testing the "Fix non-access data TLB cache flush faults" change,
I noticed a significant improvement in glibc build and check times.
This led me to investigate the parisc_cache_flush_threshold setting.
It determines when we switch from line flushing to whole cache flushing.

It turned out that the parisc_cache_flush_threshold setting on
mako and mako2 machines (PA8800 and PA8900 processors) was way too
small. Adjusting this setting provided almost a factor two improvement
in the glibc build and check time.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

Userspace is up to now limited to 32-bit, so it's sufficient to print
only 32-bit values when showing pointer addresses.
Signed-off-by: Helge Deller <deller@gmx.de>

Convert to use real temp variables instead of clobbering processor
registers.
Signed-off-by: Helge Deller <deller@gmx.de>

Convert to use real temp variables instead of clobbering processor
registers.
Signed-off-by: Helge Deller <deller@gmx.de>

Convert to use real temp variables instead of clobbering processor
registers.
Signed-off-by: Helge Deller <deller@gmx.de>

Convert to use real temp variables instead of clobbering processor
registers.
Signed-off-by: Helge Deller <deller@gmx.de>

Convert the inline assembly code to use the automatic EFAULT exception
handler. With that the fixup code can be dropped.

The other change is to allow double-word only when a 64-bit kernel is
used instead of depending on CONFIG_PA20.
Signed-off-by: Helge Deller <deller@gmx.de>

The get_current() code uses the mfctl() macro to get the pointer to the
current task struct from %cr30. The problem with the mfctl() macro is,
that it is marked volatile which is basically correct, because mfctl()
is used to get e.g. the current internal timer or interrupt flags as
well.

But specifically the task struct pointer (%cr30) doesn't change over
time when the kernel executes code for a task.

So, by dropping the volatile when retrieving %cr30 the compiler is now
able to get this value only once and optimize the generated code a lot.

A bloat-o-meter comparism shows that this patch saves ~5kB kernel code
on a 32-bit kernel and ~6kB kernel code on a 64-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>

Use the provided space register constants instead of hardcoded values.
Signed-off-by: Helge Deller <deller@gmx.de>

Instead of hardcoding the space registers as strings, use the SR_USER
and SR_KERNEL constants to form the space register in the access
functions.
Signed-off-by: Helge Deller <deller@gmx.de>

Provide defines for space registers (SR_KERNEL, SR_USER, ...) which
should be used instead of hardcoding the values.
Signed-off-by: Helge Deller <deller@gmx.de>

This patch drops the CONFIG_PARISC_SELF_EXTRACT option.

The palo boot loader is able to decompress a kernel which was compressed
with gzip. That possibility was useful when the Linux kernel
self-extracting feature wasn't implemented yet.

Beside the fact that the self-extracting feature offers much better
compression rates, we do support self-extracting kernels already since
kernel v4.14, so now it's really time to get rid of that old option and
always use the self-extractor.
Signed-off-by: Helge Deller <deller@gmx.de>

The stifb driver (for Artist/HCRX graphics on PA-RISC) was missing
the fillrect function.
Tested on a 715/64 PA-RISC machine and in qemu.
Signed-off-by: Helge Deller <deller@gmx.de>

Add minimal vDSO support, which provides the signal trampoline helpers,
but none of the userspace syscall helpers like time wrappers.

The big benefit of this vDSO implementation is, that we now don't need
an executeable stack any longer. PA-RISC is one of the last
architectures where an executeable stack was needed in oder to implement
the signal trampolines by putting assembly instructions on the stack
which then gets executed. Instead the kernel will provide the relevant
code in the vDSO page and only put the pointers to the signal
information on the stack.

By dropping the need for executable stacks we avoid running into issues
with applications which want non executable stacks for security reasons.
Additionally, alternative stacks on memory areas without exec
permissions are supported too.

This code is based on an initial implementation by Randolph Chung from 2006:
https://lore.kernel.org/linux-parisc/4544A34A.6080700@tausq.org/

I did the porting and lifted the code to current code base. Dave fixed
the unwind code so that gdb and glibc are able to backtrace through the
code. An additional patch to gdb will be pushed upstream by Dave.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dave Anglin <dave.anglin@bell.net>
Cc: Randolph Chung <randolph@tausq.org>
Signed-off-by: Helge Deller <deller@gmx.de>

With the latest cache fix for non-access faults and the support for
non-access faults (code 17) in handle_interruption, we can remove
the fast path emulation for fdc, fic, pdc, lpa, probe and probei
instructions.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

Currently, the parisc kernel does not fully support non-access TLB
fault handling for probe instructions. In the fast path, we set the
target register to zero if it is not a shadowed register. The slow
path is not implemented, so we call do_page_fault. The architecture
indicates that non-access faults should not cause a page fault from
disk.

This change adds to code to provide non-access fault support for
probe instructions. It also modifies the handling of faults on
userspace so that if the address lies in a valid VMA and the access
type matches that for the VMA, the probe target register is set to
one. Otherwise, the target register is set to zero.

This was done to make probe instructions more useful for userspace.
Probe instructions are not very useful if they set the target register
to zero whenever a page is not present in memory. Nominally, the
purpose of the probe instruction is determine whether read or write
access to a given address is allowed.

This fixes a problem in function pointer comparison noticed in the
glibc testsuite (stdio-common/tst-vfprintf-user-type). The same
problem is likely in glibc (_dl_lookup_address).

V2 adds flush and lpa instruction support to handle_nadtlb_fault.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

When a page is not present, we get non-access data TLB faults from
the fdc and fic instructions in flush_user_dcache_range_asm and
flush_user_icache_range_asm. When these occur, the cache line is
not invalidated and potentially we get memory corruption. The
problem was hidden by the nullification of the flush instructions.

These faults also affect performance. With pa8800/pa8900 processors,
there will be 32 faults per 4 KB page since the cache line is 128
bytes.  There will be more faults with earlier processors.

The problem is fixed by using flush_cache_pages(). It does the flush
using a tmp alias mapping.

The flush_cache_pages() call in flush_cache_range() flushed too
large a range.

V2: Remove unnecessary preempt_disable() and preempt_enable() calls.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull btrfs fixes from David Sterba:
 "A few more fixes for various problems that have user visible effects
  or seem to be urgent:

   - fix corruption when combining DIO and non-blocking io_uring over
     multiple extents (seen on MariaDB)

   - fix relocation crash due to premature return from commit

   - fix quota deadlock between rescan and qgroup removal

   - fix item data bounds checks in tree-checker (found on a fuzzed
     image)

   - fix fsync of prealloc extents after EOF

   - add missing run of delayed items after unlink during log replay

   - don't start relocation until snapshot drop is finished

   - fix reversed condition for subpage writers locking

   - fix warning on page error"

* tag 'for-5.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fallback to blocking mode when doing async dio over multiple extents
  btrfs: add missing run of delayed items after unlink during log replay
  btrfs: qgroup: fix deadlock between rescan worker and remove qgroup
  btrfs: fix relocation crash due to premature return from btrfs_commit_transaction()
  btrfs: do not start relocation until in progress drops are done
  btrfs: tree-checker: use u64 for item data end to avoid overflow
  btrfs: do not WARN_ON() if we have PageError set
  btrfs: fix lost prealloc extents beyond eof after full fsync
  btrfs: subpage: fix a wrong check on subpage->writers

Pull kvm fixes from Paolo Bonzini:
 "x86 guest:

   - Tweaks to the paravirtualization code, to avoid using them when
     they're pointless or harmful

  x86 host:

   - Fix for SRCU lockdep splat

   - Brown paper bag fix for the propagation of errno"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: pull kvm->srcu read-side to kvm_arch_vcpu_ioctl_run
  KVM: x86/mmu: Passing up the error state of mmu_alloc_shadow_roots()
  KVM: x86: Yield to IPI target vCPU only if it is busy
  x86/kvmclock: Fix Hyper-V Isolated VM's boot issue when vCPUs > 64
  x86/kvm: Don't waste memory if kvmclock is disabled
  x86/kvm: Don't use PV TLB/yield when mwait is advertised

Pull powerpc fix from Michael Ellerman:
 "Fix build failure when CONFIG_PPC_64S_HASH_MMU is not set.

  Thanks to Murilo Opsfelder Araujo, and Erhard F"

* tag 'powerpc-5.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Fix build failure when CONFIG_PPC_64S_HASH_MMU is not set

Pull tracing fixes from Steven Rostedt:

 - Fix sorting on old "cpu" value in histograms

 - Fix return value of __setup() boot parameter handlers

* tag 'trace-v5.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix return value of __setup handlers
  tracing/histogram: Fix sorting on old "cpu" value

Pull input updates from Dmitry Torokhov:

 - a fixup for Goodix touchscreen driver allowing it to work on certain
   Cherry Trail devices

 - a fix for imbalanced enable/disable regulator in Elam touchpad driver
   that became apparent when used with Asus TF103C 2-in-1 dock

 - a couple new input keycodes used on newer keyboards

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  HID: add mapping for KEY_ALL_APPLICATIONS
  HID: add mapping for KEY_DICTATE
  Input: elan_i2c - fix regulator enable count imbalance after suspend/resume
  Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power()
  Input: goodix - workaround Cherry Trail devices with a bogus ACPI Interrupt() resource
  Input: goodix - use the new soc_intel_is_byt() helper
  Input: samsung-keypad - properly state IOMEM dependency

Merge misc fixes from Andrew Morton:
 "8 patches.

  Subsystems affected by this patch series: mm (hugetlb, pagemap, and
  userfaultfd), memfd, selftests, and kconfig"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  configs/debug: set CONFIG_DEBUG_INFO=y properly
  proc: fix documentation and description of pagemap
  kselftest/vm: fix tests build with old libc
  memfd: fix F_SEAL_WRITE after shmem huge page allocated
  mm: fix use-after-free when anon vma name is used after vma is freed
  mm: prevent vm_area_struct::anon_name refcount saturation
  mm: refactor vm_area_struct::anon_vma_name usage code
  selftests/vm: cleanup hugetlb file after mremap test

Pull s390 fixes from Vasily Gorbik:

 - Fix HAVE_DYNAMIC_FTRACE_WITH_ARGS implementation by providing correct
   switching between ftrace_caller/ftrace_regs_caller and supplying
   pt_regs only when ftrace_regs_caller is activated.

 - Fix exception table sorting.

 - Fix breakage of kdump tooling by preserving metadata it cannot
   function without.

* tag 's390-5.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/extable: fix exception table sorting
  s390/ftrace: fix arch_ftrace_get_regs implementation
  s390/ftrace: fix ftrace_caller/ftrace_regs_caller generation
  s390/setup: preserve memory at OLDMEM_BASE and OLDMEM_SIZE

CONFIG_DEBUG_INFO can't be set by user directly, so set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y instead.

Otherwise, we end up with no debuginfo in vmlinux which is a big no-no
for kernel debugging.

Link: https://lkml.kernel.org/r/20220301202920.18488-1-quic_qiancai@quicinc.comSigned-off-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since bit 57 was exported for uffd-wp write-protected (commit
fb8e37f3: "mm/pagemap: export uffd-wp protection information"),
fixing it can reduce some unnecessary confusion.

Link: https://lkml.kernel.org/r/20220301044538.3042713-1-yun.zhou@windriver.com
Fixes: fb8e37f3 ("mm/pagemap: export uffd-wp protection information")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Tiberiu A Georgescu <tiberiu.georgescu@nutanix.com>
Cc: Florian Schmidt <florian.schmidt@nutanix.com>
Cc: Ivan Teterevkov <ivan.teterevkov@nutanix.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Colin Cross <ccross@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The error message when I build vm tests on debian10 (GLIBC 2.28):

    userfaultfd.c: In function `userfaultfd_pagemap_test':
    userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use
    in this function); did you mean `MADV_RANDOM'?
      if (madvise(area_dst, test_pgsize, MADV_PAGEOUT))
                                         ^~~~~~~~~~~~
                                         MADV_RANDOM

This patch includes these newer definitions from UAPI linux/mman.h, is
useful to fix tests build on systems without these definitions in glibc
sys/mman.h.

Link: https://lkml.kernel.org/r/20220227055330.43087-2-zhouchengming@bytedance.comSigned-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Wangyong reports: after enabling tmpfs filesystem to support transparent
hugepage with the following command:

  echo always > /sys/kernel/mm/transparent_hugepage/shmem_enabled

the docker program tries to add F_SEAL_WRITE through the following
command, but it fails unexpectedly with errno EBUSY:

  fcntl(5, F_ADD_SEALS, F_SEAL_WRITE) = -1.

That is because memfd_tag_pins() and memfd_wait_for_pins() were never
updated for shmem huge pages: checking page_mapcount() against
page_count() is hopeless on THP subpages - they need to check
total_mapcount() against page_count() on THP heads only.

Make memfd_tag_pins() (compared > 1) as strict as memfd_wait_for_pins()
(compared != 1): either can be justified, but given the non-atomic
total_mapcount() calculation, it is better now to be strict.  Bear in
mind that total_mapcount() itself scans all of the THP subpages, when
choosing to take an XA_CHECK_SCHED latency break.

Also fix the unlikely xa_is_value() case in memfd_wait_for_pins(): if a
page has been swapped out since memfd_tag_pins(), then its refcount must
have fallen, and so it can safely be untagged.

Link: https://lkml.kernel.org/r/a4f79248-df75-2c8c-3df-ba3317ccb5da@google.comSigned-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reported-by: wangyong <wang.yong12@zte.com.cn>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: CGEL ZTE <cgel.zte@gmail.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When adjacent vmas are being merged it can result in the vma that was
originally passed to madvise_update_vma being destroyed.  In the current
implementation, the name parameter passed to madvise_update_vma points
directly to vma->anon_name and it is used after the call to vma_merge.
In the cases when vma_merge merges the original vma and destroys it,
this might result in UAF.  For that the original vma would have to hold
the anon_vma_name with the last reference.  The following vma would need
to contain a different anon_vma_name object with the same string.  Such
scenario is shown below:

madvise_vma_behavior(vma)
  madvise_update_vma(vma, ..., anon_name == vma->anon_name)
    vma_merge(vma)
      __vma_adjust(vma) <-- merges vma with adjacent one
        vm_area_free(vma) <-- frees the original vma
    replace_vma_anon_name(anon_name) <-- UAF of vma->anon_name

Fix this by raising the name refcount and stabilizing it.

Link: https://lkml.kernel.org/r/20220224231834.1481408-3-surenb@google.com
Link: https://lkml.kernel.org/r/20220223153613.835563-3-surenb@google.com
Fixes: 9a10064f ("mm: add a field to store names for private anonymous memory")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: syzbot+aa7b3d4b35f9dc46a366@syzkaller.appspotmail.com
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Chris Hyser <chris.hyser@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Colin Cross <ccross@google.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xiaofeng Cao <caoxiaofeng@yulong.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A deep process chain with many vmas could grow really high.  With
default sysctl_max_map_count (64k) and default pid_max (32k) the max
number of vmas in the system is 2147450880 and the refcounter has
headroom of 1073774592 before it reaches REFCOUNT_SATURATED
(3221225472).

Therefore it's unlikely that an anonymous name refcounter will overflow
with these defaults.  Currently the max for pid_max is PID_MAX_LIMIT
(4194304) and for sysctl_max_map_count it's INT_MAX (2147483647).  In
this configuration anon_vma_name refcount overflow becomes theoretically
possible (that still require heavy sharing of that anon_vma_name between
processes).

kref refcounting interface used in anon_vma_name structure will detect a
counter overflow when it reaches REFCOUNT_SATURATED value but will only
generate a warning and freeze the ref counter.  This would lead to the
refcounted object never being freed.  A determined attacker could leak
memory like that but it would be rather expensive and inefficient way to
do so.

To ensure anon_vma_name refcount does not overflow, stop anon_vma_name
sharing when the refcount reaches REFCOUNT_MAX (2147483647), which still
leaves INT_MAX/2 (1073741823) values before the counter reaches
REFCOUNT_SATURATED.  This should provide enough headroom for raising the
refcounts temporarily.

Link: https://lkml.kernel.org/r/20220223153613.835563-2-surenb@google.comSigned-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Chris Hyser <chris.hyser@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Colin Cross <ccross@google.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xiaofeng Cao <caoxiaofeng@yulong.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Avoid mixing strings and their anon_vma_name referenced pointers by
using struct anon_vma_name whenever possible.  This simplifies the code
and allows easier sharing of anon_vma_name structures when they
represent the same name.

[surenb@google.com: fix comment]

Link: https://lkml.kernel.org/r/20220223153613.835563-1-surenb@google.com
Link: https://lkml.kernel.org/r/20220224231834.1481408-1-surenb@google.comSigned-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Colin Cross <ccross@google.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Chris Hyser <chris.hyser@oracle.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Xiaofeng Cao <caoxiaofeng@yulong.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The hugepage-mremap test will create a file in a hugetlb filesystem.  In
a default 'run_vmtests' run, the file will contain all the hugetlb
pages.  After the test, the file remains and there are no free hugetlb
pages for subsequent tests.  This causes those hugetlb tests to fail.

Change hugepage-mremap to take the name of the hugetlb file as an
argument.  Unlink the file within the test, and just to be sure remove
the file in the run_vmtests script.

Link: https://lkml.kernel.org/r/20220201033459.156944-1-mike.kravetz@oracle.comSigned-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The following build failure occurs when CONFIG_PPC_64S_HASH_MMU is not
set:

    arch/powerpc/kernel/setup_64.c: In function ‘setup_per_cpu_areas’:
    arch/powerpc/kernel/setup_64.c:811:21: error: ‘mmu_linear_psize’ undeclared (first use in this function); did you mean ‘mmu_virtual_psize’?
      811 |                 if (mmu_linear_psize == MMU_PAGE_4K)
          |                     ^~~~~~~~~~~~~~~~
          |                     mmu_virtual_psize
    arch/powerpc/kernel/setup_64.c:811:21: note: each undeclared identifier is reported only once for each function it appears in

Move the declaration of mmu_linear_psize outside of
CONFIG_PPC_64S_HASH_MMU ifdef.

After the above is fixed, it fails later with the following error:

    ld: arch/powerpc/kexec/file_load_64.o: in function `.arch_kexec_kernel_image_probe':
    file_load_64.c:(.text+0x1c1c): undefined reference to `.add_htab_mem_range'

Fix that, too, by conditioning add_htab_mem_range() symbol to
CONFIG_PPC_64S_HASH_MMU.

Fixes: 387e220a ("powerpc/64s: Move hash MMU support code under CONFIG_PPC_64S_HASH_MMU")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215567
Link: https://lore.kernel.org/r/20220301204743.45133-1-muriloo@linux.ibm.com

Pull block fix from Jens Axboe:
 "Just a small UAF fix for blktrace"

* tag 'block-5.17-2022-03-04' of git://git.kernel.dk/linux-block:
  blktrace: fix use after free for struct blk_trace