Current xmon 'dt' command dumps the tracing buffer for all the CPUs,
which makes it very hard to read due to the fact that most of
powerpc machines currently have many CPUs. Other than that, the CPU
lines are interleaved in the ftrace log.

This new option just dumps the ftrace buffer for the current CPU.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Make wf_control_ops const as they are only stored in the ops field of a
wf_control structure, which is const.
Make wf_pid_param const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This function is not called with the nest_init_lock held, and it also
unlocks the nest_init_lock immediately below, so it's fairly clear
that this is a typo and should be locking the lock.

Fixes: 885dcd70 ("powerpc/perf: Add nest IMC PMU support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Commit 968159c0 ("powerpc/8xx: Getting rid of remaining use of
CONFIG_8xx") removed all but 2 references to 8xx in Kconfigs.

This patch removes the two remaining ones.

Fixes: 968159c0 ("powerpc/8xx: Getting rid of remaining use of CONFIG_8xx")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Both xive_core_init() and xive_native_init() are called from and call
__init routines, so they should also be __init.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

early_check_vec5() is called from and calls __init routines, so should
also be __init.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

head_8xx is dedicated to 8xx so no need to use macros that
depends on the CPU
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Use symbolic names for DSISR bits in DSI
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

For the 8xx, PVR values defined in arch/powerpc/include/asm/reg.h
are nowhere used.

Remove all defines and add PVR_8xx

Use it in arch/powerpc/kernel/cputable.c
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Two config options exist to define powerpc MPC8xx:
* CONFIG_PPC_8xx
* CONFIG_8xx

arch/powerpc/platforms/Kconfig.cputype has contained the following
comment about CONFIG_8xx item for some years:
"# this is temp to handle compat with arch=ppc"

There is no more users of CONFIG_8xx, so remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Two config options exist to define powerpc MPC8xx:
* CONFIG_PPC_8xx
* CONFIG_8xx

arch/powerpc/platforms/Kconfig.cputype has contained the following
comment about CONFIG_8xx item for some years:
"# this is temp to handle compat with arch=ppc"

arch/powerpc is now the only place with remaining use of
CONFIG_8xx: get rid of them.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

4xx, CPM2 and 8xx cannot be selected at the same time, so
no need to test 8xx && !4xx && !CPM2. Testing 8xx is enough.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The 8xx cannot access the TBL and TBU registers using mfspr/mtspr
It must be accessed using mftb/mftbu

Due to this, there is a number of places with #ifdef CONFIG_8xx

This patch defines new macros MFTBL(x) and MFTBU(x) on the same model
as MFTB(x) and tries to make use of them as much as possible.

In arch/powerpc/include/asm/timex.h, we also remove the ifdef
for the asm() operands as the compiler doesn't mind unused operands
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

mpc8xx_pic.c is dedicated to the 8xx, so move it to platform/8xx
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

To remain consistent with what is done with CPM2, let's link
CPM1 related parts to CONFIG_CPM1 instead of CONFIG_8xx

When something depends on both CPM1 and CPM2 we associate it
with CONFIG_CPM
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Since commit aa42c69c ("[POWERPC] Add support for FP emulation
for the e300c2 core"), program_check_exception() can be called for
math emulation. In that case, 'reason' is 0.

On the 8xx, there is a Software Emulation interrupt which is
called for all unimplemented and illegal instructions. This
interrupt calls SoftwareEmulation() which does almost the
same as program_check_exception() called with reason = 0.

The Software Emulation interrupt sets all reason bits to 0,
it is therefore possible to call program_check_exception()
directly from the interrupt handler.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In the same spirit as what was done for 4xx and 44x, move
the 8xx machine check into platforms/8xx
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The entire 8xx directory is omitted if CONFIG_8xx is not enabled, so
within the 8xx/Makefile CONFIG_8xx is always y. So convert
obj-$(CONFIG_8xx) to the more obvious obj-y.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Currently we open code the reason codes for program checks. Instead use
the existing SRR1 defines.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We already have mce.c which is built for 64bit and contains other parts
of the machine check code, so move these bits in there too.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Make it clear that the fallback version of machine_check_generic() is
only used on 32-bit configs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

get_mc_reason() no longer provides (if it ever really did) any
meaningful abstraction, so remove it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Now that we have 4xx platform directory we can move the 4xx machine
check handler in there. Again we drop get_mc_reason() and replace it
with regs->dsisr directly (which is actually SPRN_ESR).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We have a lot of code in sysdev for supporting 4xx, ie. either 40x or
44x. Instead it would be cleaner if it was all in platforms/4xx.

This is slightly odd in that we don't actually define any machines in
the 4xx platform, as is usual for a platform directory. But still it
seems like a better result to have all this related code in a directory
by itself.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We have several 44x machine check handlers defined in traps.c. It would
be preferable if they were split out with the platforms that use them.
Do that.

In the process, drop get_mc_reason() and instead just open code the
lookup of reason from regs->dsisr. This avoids a pointless layer of
abstraction.

We know to use regs->dsisr because 44x enables BOOKE which enables
PPC_ADV_DEBUG_REGS, and FSL_BOOKE is not enabled on 44x builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The entire 44x directory is omitted if CONFIG_44x is not enabled, so
within the 44x/Makefile CONFIG_44x is always y. So convert
obj-$(CONFIG_44x) to the more obvious obj-y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Currently we build the 47x cputable entries even when CONFIG_PPC_47x is
disabled. That means a kernel built without CONFIG_PPC_47x will claim to
support a 47x CPU and start booting, only to break somewhere later
because it doesn't have 47x support compiled in.

So guard the 47x cputable entries with CONFIG_PPC_47x. Note that this is
inside the #ifdef CONFIG_44x section, because 47x depends on 44x.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Adds support for clearing different sensor groups. OCC inband sensor
groups like CSM, Profiler, Job Scheduler can be cleared using this
driver. The min/max of all sensors belonging to these sensor groups
will be cleared.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This patch adds support to set power-shifting-ratio which hints the
firmware how to distribute/throttle power between different entities
in a system (e.g CPU v/s GPU). This ratio is used by OCC for power
capping algorithm.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Adds a generic powercap framework to change the system powercap
inband through OPAL-OCC command/response interface.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This driver currently reports the H_BEST_ENERGY hypervisor call is
unsupported (even when booting in a non-virtualised environment). This
is not something the administrator can do much with, and not
significant for debugging.

Remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This adds emulation for the isel instruction.
Tested for correctness against the isel instruction and its extended
mnemonics (lt, gt, eq) on ppc64le.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This adds emulation for the prtyw and prtyd instructions.
Tested for logical correctness against the prtyw and prtyd instructions
on ppc64le.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This adds emulation for the bpermd instruction.
Tested for correctness against the bpermd instruction on ppc64le.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This adds emulations for the popcntb, popcntw, and popcntd instructions.
Tested for correctness against the popcnt{b,w,d} instructions on ppc64le.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This patch adds emulation of the cmpb instruction, enabling xmon to
emulate this instruction.
Tested for correctness against the cmpb asm instruction on ppc64le.
Signed-off-by: Matt Brown <matthew.brown.dev@gmail.com>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Fixes: 34922527 ("powerpc/perf: Add power9 event list macros for generic and cache events")
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Add couple of more events (PM_LD_MISS_L1 and PM_BR_2PATH) to
power9 event list and power9_event_alternatives array (these
events can be counted in more than one PMC).
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

There are some hardware events on Power systems which only count when
the processor is not idle, and there are some fixed-function counters
which count such events. For example, the "run cycles" event counts
cycles when the processor is not idle. If the user asks to count
cycles, we can use "run cycles" if this is a per-task event, since the
processor is running when the task is running, by definition. We can't
use "run cycles" if the user asks for "cycles" on a system-wide
counter.

Currently in power8 this check is done using PPMU_ONLY_COUNT_RUN flag
in power8_get_alternatives() function. Based on the flag, events are
switched if needed. This function should also be enabled in power9, so
factor out the code to isa207_get_alternatives().

Fixes: efe881af ('powerpc/perf: Factor out event_alternative function')
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Commit 20dd4c62 ('powerpc/perf: Fix SDAR_MODE value for continous
sampling on Power9') set the default sdar_mode value in MMCRA[SDAR_MODE]
to be used as 0b01 (Update on TLB miss). And this value is set if sdar_mode
from event is zero, or we are in continous sampling mode in power9 dd1.

But it is preferred to have the sdar_mode value for power9 as
0b10 (Update on dcache miss) for better sampling updates instead
of 0b01 (Update on TLB miss).

From Anton:

Using a bandwidth test case with a 1MB footprint, I profiled cycles and
chose TLB updates of the SDAR:

  $ perf record -d -e r000400000000001E:u ./bw2001 1M
                        ^
                        SDAR TLB

  $ perf report -D | grep PERF_RECORD_SAMPLE | sed 's/.*addr: //' | sort -u | wc -l
  4

  I get 4 unique addresses. If I ran with dcache misses:

  $ perf record -d -e r000800000000001E:u ./bw2001 1M
                        ^
                        SDAR dcache miss

  $ perf report -D|grep PERF_RECORD_SAMPLE| sed 's/.*addr: //'|sort -u | wc -l
  5217

I get 5217 unique addresses. No surprises here, but it does show why
TLB misses is the wrong event to default to - we get very little useful
information out of it.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>