- 29 Feb, 2024 8 commits
-
-
Sabrina Dubroca authored
If we're not doing async, the handling is much simpler. There's no reference counting, we just need to wait for the completion to wake us up and return its result. We should preferably also use a separate crypto_wait. I'm not seeing a UAF as I did in the past, I think aec79619 ("tls: fix race between async notify and socket close") took care of it. This will make the next fix easier. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/47bde5f649707610eaef9f0d679519966fc31061.1709132643.git.sd@queasysnail.netSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Sabrina Dubroca authored
If we peek from 2 records with a currently empty rx_list, and the first record is decrypted synchronously but the second record is decrypted async, the following happens: 1. decrypt record 1 (sync) 2. copy from record 1 to the userspace's msg 3. queue the decrypted record to rx_list for future read(!PEEK) 4. decrypt record 2 (async) 5. queue record 2 to rx_list 6. call process_rx_list to copy data from the 2nd record We currently pass copied=0 as skip offset to process_rx_list, so we end up copying once again from the first record. We should skip over the data we've already copied. Seen with selftest tls.12_aes_gcm.recv_peek_large_buf_mult_recs Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by:
-
Sabrina Dubroca authored
With mixed sync/async decryption, or failures of crypto_aead_decrypt, we increment decrypt_pending but we never do the corresponding decrement since tls_decrypt_done will not be called. In this case, we should decrement decrypt_pending immediately to avoid getting stuck. For example, the prequeue prequeue test gets stuck with mixed modes (one async decrypt + one sync decrypt). Fixes: 94524d8f ("net/tls: Add support for async decryption of tls records") Signed-off-by:
-
Alexander Ofitserov authored
The gtp_link_ops operations structure for the subsystem must be registered after registering the gtp_net_ops pernet operations structure. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: [ 1010.702740] gtp: GTP module unloaded [ 1010.715877] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI [ 1010.715888] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] [ 1010.715895] CPU: 1 PID: 128616 Comm: a.out Not tainted 6.8.0-rc6-std-def-alt1 #1 [ 1010.715899] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 [ 1010.715908] RIP: 0010:gtp_newlink+0x4d7/0x9c0 [gtp] [ 1010.715915] Code: 80 3c 02 00 0f 85 41 04 00 00 48 8b bb d8 05 00 00 e8 ed f6 ff ff 48 89 c2 48 89 c5 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4f 04 00 00 4c 89 e2 4c 8b 6d 00 48 b8 00 00 00 [ 1010.715920] RSP: 0018:ffff888020fbf180 EFLAGS: 00010203 [ 1010.715929] RAX: dffffc0000000000 RBX: ffff88800399c000 RCX: 0000000000000000 [ 1010.715933] RDX: 0000000000000001 RSI: ffffffff84805280 RDI: 0000000000000282 [ 1010.715938] RBP: 000000000000000d R08: 0000000000000001 R09: 0000000000000000 [ 1010.715942] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88800399cc80 [ 1010.715947] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000400 [ 1010.715953] FS: 00007fd1509ab5c0(0000) GS:ffff88805b300000(0000) knlGS:0000000000000000 [ 1010.715958] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1010.715962] CR2: 0000000000000000 CR3: 000000001c07a000 CR4: 0000000000750ee0 [ 1010.715968] PKRU: 55555554 [ 1010.715972] Call Trace: [ 1010.715985] ? __die_body.cold+0x1a/0x1f [ 1010.715995] ? die_addr+0x43/0x70 [ 1010.716002] ? exc_general_protection+0x199/0x2f0 [ 1010.716016] ? asm_exc_general_protection+0x1e/0x30 [ 1010.716026] ? gtp_newlink+0x4d7/0x9c0 [gtp] [ 1010.716034] ? gtp_net_exit+0x150/0x150 [gtp] [ 1010.716042] __rtnl_newlink+0x1063/0x1700 [ 1010.716051] ? rtnl_setlink+0x3c0/0x3c0 [ 1010.716063] ? is_bpf_text_address+0xc0/0x1f0 [ 1010.716070] ? kernel_text_address.part.0+0xbb/0xd0 [ 1010.716076] ? __kernel_text_address+0x56/0xa0 [ 1010.716084] ? unwind_get_return_address+0x5a/0xa0 [ 1010.716091] ? create_prof_cpu_mask+0x30/0x30 [ 1010.716098] ? arch_stack_walk+0x9e/0xf0 [ 1010.716106] ? stack_trace_save+0x91/0xd0 [ 1010.716113] ? stack_trace_consume_entry+0x170/0x170 [ 1010.716121] ? __lock_acquire+0x15c5/0x5380 [ 1010.716139] ? mark_held_locks+0x9e/0xe0 [ 1010.716148] ? kmem_cache_alloc_trace+0x35f/0x3c0 [ 1010.716155] ? __rtnl_newlink+0x1700/0x1700 [ 1010.716160] rtnl_newlink+0x69/0xa0 [ 1010.716166] rtnetlink_rcv_msg+0x43b/0xc50 [ 1010.716172] ? rtnl_fdb_dump+0x9f0/0x9f0 [ 1010.716179] ? lock_acquire+0x1fe/0x560 [ 1010.716188] ? netlink_deliver_tap+0x12f/0xd50 [ 1010.716196] netlink_rcv_skb+0x14d/0x440 [ 1010.716202] ? rtnl_fdb_dump+0x9f0/0x9f0 [ 1010.716208] ? netlink_ack+0xab0/0xab0 [ 1010.716213] ? netlink_deliver_tap+0x202/0xd50 [ 1010.716220] ? netlink_deliver_tap+0x218/0xd50 [ 1010.716226] ? __virt_addr_valid+0x30b/0x590 [ 1010.716233] netlink_unicast+0x54b/0x800 [ 1010.716240] ? netlink_attachskb+0x870/0x870 [ 1010.716248] ? __check_object_size+0x2de/0x3b0 [ 1010.716254] netlink_sendmsg+0x938/0xe40 [ 1010.716261] ? netlink_unicast+0x800/0x800 [ 1010.716269] ? __import_iovec+0x292/0x510 [ 1010.716276] ? netlink_unicast+0x800/0x800 [ 1010.716284] __sock_sendmsg+0x159/0x190 [ 1010.716290] ____sys_sendmsg+0x712/0x880 [ 1010.716297] ? sock_write_iter+0x3d0/0x3d0 [ 1010.716304] ? __ia32_sys_recvmmsg+0x270/0x270 [ 1010.716309] ? lock_acquire+0x1fe/0x560 [ 1010.716315] ? drain_array_locked+0x90/0x90 [ 1010.716324] ___sys_sendmsg+0xf8/0x170 [ 1010.716331] ? sendmsg_copy_msghdr+0x170/0x170 [ 1010.716337] ? lockdep_init_map_type+0x2c7/0x860 [ 1010.716343] ? lockdep_hardirqs_on_prepare+0x430/0x430 [ 1010.716350] ? debug_mutex_init+0x33/0x70 [ 1010.716360] ? percpu_counter_add_batch+0x8b/0x140 [ 1010.716367] ? lock_acquire+0x1fe/0x560 [ 1010.716373] ? find_held_lock+0x2c/0x110 [ 1010.716384] ? __fd_install+0x1b6/0x6f0 [ 1010.716389] ? lock_downgrade+0x810/0x810 [ 1010.716396] ? __fget_light+0x222/0x290 [ 1010.716403] __sys_sendmsg+0xea/0x1b0 [ 1010.716409] ? __sys_sendmsg_sock+0x40/0x40 [ 1010.716419] ? lockdep_hardirqs_on_prepare+0x2b3/0x430 [ 1010.716425] ? syscall_enter_from_user_mode+0x1d/0x60 [ 1010.716432] do_syscall_64+0x30/0x40 [ 1010.716438] entry_SYSCALL_64_after_hwframe+0x62/0xc7 [ 1010.716444] RIP: 0033:0x7fd1508cbd49 [ 1010.716452] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ef 70 0d 00 f7 d8 64 89 01 48 [ 1010.716456] RSP: 002b:00007fff18872348 EFLAGS: 00000202 ORIG_RAX: 000000000000002e [ 1010.716463] RAX: ffffffffffffffda RBX: 000055f72bf0eac0 RCX: 00007fd1508cbd49 [ 1010.716468] RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000006 [ 1010.716473] RBP: 00007fff18872360 R08: 00007fff18872360 R09: 00007fff18872360 [ 1010.716478] R10: 00007fff18872360 R11: 0000000000000202 R12: 000055f72bf0e1b0 [ 1010.716482] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 1010.716491] Modules linked in: gtp(+) udp_tunnel ib_core uinput af_packet rfkill qrtr joydev hid_generic usbhid hid kvm_intel iTCO_wdt intel_pmc_bxt iTCO_vendor_support kvm snd_hda_codec_generic ledtrig_audio irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel snd_hda_intel nls_utf8 snd_intel_dspcfg nls_cp866 psmouse aesni_intel vfat crypto_simd fat cryptd glue_helper snd_hda_codec pcspkr snd_hda_core i2c_i801 snd_hwdep i2c_smbus xhci_pci snd_pcm lpc_ich xhci_pci_renesas xhci_hcd qemu_fw_cfg tiny_power_button button sch_fq_codel vboxvideo drm_vram_helper drm_ttm_helper ttm vboxsf vboxguest snd_seq_midi snd_seq_midi_event snd_seq snd_rawmidi snd_seq_device snd_timer snd soundcore msr fuse efi_pstore dm_mod ip_tables x_tables autofs4 virtio_gpu virtio_dma_buf drm_kms_helper cec rc_core drm virtio_rng virtio_scsi rng_core virtio_balloon virtio_blk virtio_net virtio_console net_failover failover ahci libahci libata evdev scsi_mod input_leds serio_raw virtio_pci intel_agp [ 1010.716674] virtio_ring intel_gtt virtio [last unloaded: gtp] [ 1010.716693] ---[ end trace 04990a4ce61e174b ]--- Cc: stable@vger.kernel.org Signed-off-by:
Alexander Ofitserov <oficerovas@altlinux.org> Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240228114703.465107-1-oficerovas@altlinux.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin. Patch #2 fixes an issue with bridge netfilter and broadcast/multicast packets. There is a day 0 bug in br_netfilter when used with connection tracking. Conntrack assumes that an nf_conn structure that is not yet added to hash table ("unconfirmed"), is only visible by the current cpu that is processing the sk_buff. For bridge this isn't true, sk_buff can get cloned in between, and clones can be processed in parallel on different cpu. This patch disables NAT and conntrack helpers for multicast packets. Patch #3 adds a selftest to cover for the br_netfilter bug. netfilter pull request 24-02-29 * tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: netfilter: add bridge conntrack + multicast test case netfilter: bridge: confirm multicast packets before passing them up the stack netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate() ==================== Link: https://lore.kernel.org/r/20240229000135.8780-1-pablo@netfilter.orgSigned-off-by: -
Lukasz Majewski authored
Current HSR implementation uses following supervisory frame (even for HSRv1 the HSR tag is not is not present): 00000000: 01 15 4e 00 01 2d XX YY ZZ 94 77 10 88 fb 00 01 00000010: 7e 1c 17 06 XX YY ZZ 94 77 10 1e 06 XX YY ZZ 94 00000020: 77 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 The current code adds extra two bytes (i.e. sizeof(struct hsr_sup_tlv)) when offset for skb_pull() is calculated. This is wrong, as both 'struct hsrv1_ethhdr_sp' and 'hsrv0_ethhdr_sp' already have 'struct hsr_sup_tag' defined in them, so there is no need for adding extra two bytes. This code was working correctly as with no RedBox support, the check for HSR_TLV_EOT (0x00) was off by two bytes, which were corresponding to zeroed padded bytes for minimal packet size. Fixes: eafaa88b ("net: hsr: Add support for redbox supervision frames") Signed-off-by:
Lukasz Majewski <lukma@denx.de> Reviewed-by:
-
Oleksij Rempel authored
The i211 requires the same PTP timestamp adjustments as the i210, according to its datasheet. To ensure consistent timestamping across different platforms, this change extends the existing adjustments to include the i211. The adjustment result are tested and comparable for i210 and i211 based systems. Fixes: 3f544d2a ("igb: adjust PTP timestamps for Tx/Rx latency") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240227184942.362710-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Lin Ma authored
In the commit d73ef2d6 ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic in the function `rtnl_bridge_setlink` to enable the loop to also check the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment removed the `break` statement and led to an error logic of the flags writing back at the end of this function. if (have_flags) memcpy(nla_data(attr), &flags, sizeof(flags)); // attr should point to IFLA_BRIDGE_FLAGS NLA !!! Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS. However, this is not necessarily true fow now as the updated loop will let the attr point to the last NLA, even an invalid NLA which could cause overflow writes. This patch introduces a new variable `br_flag` to save the NLA pointer that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned error logic. Fixes: d73ef2d6 ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length") Signed-off-by:
Lin Ma <linma@zju.edu.cn> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240227121128.608110-1-linma@zju.edu.cnSigned-off-by:
-
- 28 Feb, 2024 13 commits
-
-
Jakub Kicinski authored
We never increment the group number iterator, so all groups get recorded into index 0 of the mcast_groups[] array. As a result YNL can only handle using the last group. For example using the "netdev" sample on kernel with page pool commands results in: $ ./samples/netdev YNL: Multicast group 'mgmt' not found Most families have only one multicast group, so this hasn't been noticed. Plus perhaps developers usually test the last group which would have worked. Fixes: 86878f14 ("tools: ynl: user space helpers") Reviewed-by:
Donald Hunter <donald.hunter@gmail.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20240226214019.1255242-1-kuba@kernel.orgSigned-off-by:
-
Florian Westphal authored
Add test case for multicast packet confirm race. Without preceding patch, this should result in: WARNING: CPU: 0 PID: 38 at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm+0x3ed/0x5f0 Workqueue: events_unbound macvlan_process_broadcast RIP: 0010:__nf_conntrack_confirm+0x3ed/0x5f0 ? __nf_conntrack_confirm+0x3ed/0x5f0 nf_confirm+0x2ad/0x2d0 nf_hook_slow+0x36/0xd0 ip_local_deliver+0xce/0x110 __netif_receive_skb_one_core+0x4f/0x70 process_backlog+0x8c/0x130 [..] Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
conntrack nf_confirm logic cannot handle cloned skbs referencing the same nf_conn entry, which will happen for multicast (broadcast) frames on bridges. Example: macvlan0 | br0 / \ ethX ethY ethX (or Y) receives a L2 multicast or broadcast packet containing an IP packet, flow is not yet in conntrack table. 1. skb passes through bridge and fake-ip (br_netfilter)Prerouting. -> skb->_nfct now references a unconfirmed entry 2. skb is broad/mcast packet. bridge now passes clones out on each bridge interface. 3. skb gets passed up the stack. 4. In macvlan case, macvlan driver retains clone(s) of the mcast skb and schedules a work queue to send them out on the lower devices. The clone skb->_nfct is not a copy, it is the same entry as the original skb. The macvlan rx handler then returns RX_HANDLER_PASS. 5. Normal conntrack hooks (in NF_INET_LOCAL_IN) confirm the orig skb. The Macvlan broadcast worker and normal confirm path will race. This race will not happen if step 2 already confirmed a clone. In that case later steps perform skb_clone() with skb->_nfct already confirmed (in hash table). This works fine. But such confirmation won't happen when eb/ip/nftables rules dropped the packets before they reached the nf_confirm step in postrouting. Pablo points out that nf_conntrack_bridge doesn't allow use of stateful nat, so we can safely discard the nf_conn entry and let inet call conntrack again. This doesn't work for bridge netfilter: skb could have a nat transformation. Also bridge nf prevents re-invocation of inet prerouting via 'sabotage_in' hook. Work around this problem by explicit confirmation of the entry at LOCAL_IN time, before upper layer has a chance to clone the unconfirmed entry. The downside is that this disables NAT and conntrack helpers. Alternative fix would be to add locking to all code parts that deal with unconfirmed packets, but even if that could be done in a sane way this opens up other problems, for example: -m physdev --physdev-out eth0 -j SNAT --snat-to 1.2.3.4 -m physdev --physdev-out eth1 -j SNAT --snat-to 1.2.3.5 For multicast case, only one of such conflicting mappings will be created, conntrack only handles 1:1 NAT mappings. Users should set create a setup that explicitly marks such traffic NOTRACK (conntrack bypass) to avoid this, but we cannot auto-bypass them, ruleset might have accept rules for untracked traffic already, so user-visible behaviour would change. Suggested-by: -
Ignat Korchagin authored
Commit d0009eff ("netfilter: nf_tables: validate NFPROTO_* family") added some validation of NFPROTO_* families in the nft_compat module, but it broke the ability to use legacy iptables modules in dual-stack nftables. While with legacy iptables one had to independently manage IPv4 and IPv6 tables, with nftables it is possible to have dual-stack tables sharing the rules. Moreover, it was possible to use rules based on legacy iptables match/target modules in dual-stack nftables. As an example, the program from [2] creates an INET dual-stack family table using an xt_bpf based rule, which looks like the following (the actual output was generated with a patched nft tool as the current nft tool does not parse dual stack tables with legacy match rules, so consider it for illustrative purposes only): table inet testfw { chain input { type filter hook prerouting priority filter; policy accept; bytecode counter packets 0 bytes 0 accept } } After d0009eff ("netfilter: nf_tables: validate NFPROTO_* family") we get EOPNOTSUPP for the above program. Fix this by allowing NFPROTO_INET for nft_(match/target)_validate(), but also restrict the functions to classic iptables hooks. Changes in v3: * clarify that upstream nft will not display such configuration properly and that the output was generated with a patched nft tool * remove example program from commit description and link to it instead * no code changes otherwise Changes in v2: * restrict nft_(match/target)_validate() to classic iptables hooks * rewrite example program to use unmodified libnftnl Fixes: d0009eff ("netfilter: nf_tables: validate NFPROTO_* family") Link: https://lore.kernel.org/all/Zc1PfoWN38UuFJRI@calendula/T/#mc947262582c90fec044c7a3398cc92fac7afea72 [1] Link: https://lore.kernel.org/all/20240220145509.53357-1-ignat@cloudflare.com/ [2] Reported-by:
Jordan Griege <jgriege@cloudflare.com> Signed-off-by:
Ignat Korchagin <ignat@cloudflare.com> Signed-off-by:
-
Haiyue Wang authored
The fast path usage breakdown describes the detail for 'inet_sock', fix the markup title. Signed-off-by:
Haiyue Wang <haiyue.wang@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Raczynski authored
Currently when suspending driver and stopping workqueue it is checked whether workqueue is not NULL and if so, it is destroyed. Function destroy_workqueue() does drain queue and does clear variable, but it does not set workqueue variable to NULL. This can cause kernel/module panic if code attempts to clear workqueue that was not initialized. This scenario is possible when resuming suspended driver in stmmac_resume(), because there is no handling for failed stmmac_hw_setup(), which can fail and return if DMA engine has failed to initialize, and workqueue is initialized after DMA engine. Should DMA engine fail to initialize, resume will proceed normally, but interface won't work and TX queue will eventually timeout, causing 'Reset adapter' error. This then does destroy workqueue during reset process. And since workqueue is initialized after DMA engine and can be skipped, it will cause kernel/module panic. To secure against this possible crash, set workqueue variable to NULL when destroying workqueue. Log/backtrace from crash goes as follows: [88.031977]------------[ cut here ]------------ [88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out [88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398 <Skipping backtrace for watchdog timeout> [88.032251]---[ end trace e70de432e4d5c2c0 ]--- [88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter. [88.036359]------------[ cut here ]------------ [88.036519]Call trace: [88.036523] flush_workqueue+0x3e4/0x430 [88.036528] drain_workqueue+0xc4/0x160 [88.036533] destroy_workqueue+0x40/0x270 [88.036537] stmmac_fpe_stop_wq+0x4c/0x70 [88.036541] stmmac_release+0x278/0x280 [88.036546] __dev_close_many+0xcc/0x158 [88.036551] dev_close_many+0xbc/0x190 [88.036555] dev_close.part.0+0x70/0xc0 [88.036560] dev_close+0x24/0x30 [88.036564] stmmac_service_task+0x110/0x140 [88.036569] process_one_work+0x1d8/0x4a0 [88.036573] worker_thread+0x54/0x408 [88.036578] kthread+0x164/0x170 [88.036583] ret_from_fork+0x10/0x20 [88.036588]---[ end trace e70de432e4d5c2c1 ]--- [88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure") Signed-off-by:Jakub Raczynski <j.raczynski@samsung.com> Reviewed-by:
-
Lukasz Majewski authored
Correct type in the hsr_forward_do() comment. Signed-off-by:
-
Randy Dunlap authored
In a previous patch I added "select PHYLIB" at the wrong place for the ADIN1110 driver symbol, so move it to its correct place under the ADIN1110 kconfig symbol. Fixes: a9f80df4 ("net: ethernet: adi: requires PHYLIB support") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
Michal Kubecek <mkubecek@suse.cz> Closes: https://lore.kernel.org/lkml/77012b38-4b49-47f4-9a88-d773d52909ad@infradead.org/T/#m8ba397484738711edc0ad607b2c63ca02244e3c3 Cc: Lennart Franzen <lennart@lfdomain.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Cc: Nuno Sa <nuno.sa@analog.com> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Kalle Valo says: ==================== wireless fixes for v6.8-rc7 Few remaining fixes, hopefully the last wireless pull request to v6.8. Two fixes to the stack and two to iwlwifi but no high priority fixes this time. * tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: only call drv_sta_rc_update for uploaded stations MAINTAINERS: wifi: Add N: ath1*k entries to match .yaml files MAINTAINERS: wifi: update Jeff Johnson e-mail address wifi: iwlwifi: mvm: fix the TXF mapping for BZ devices wifi: iwlwifi: mvm: ensure offloading TID queue exists wifi: nl80211: reject iftype change with mesh ID change ==================== Link: https://lore.kernel.org/r/20240227135751.C5EC6C43390@smtp.kernel.orgSigned-off-by:
-
Justin Iurman authored
Not really a fix per se, but IPV6_TLV_IOAM is still tagged as "TEMPORARY IANA allocation for IOAM", while RFC 9486 is available for some time now. Just update the reference. Fixes: 9ee11f0f ("ipv6: ioam: Data plane support for Pre-allocated Trace") Signed-off-by:
Justin Iurman <justin.iurman@uliege.be> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240226124921.9097-1-justin.iurman@uliege.beSigned-off-by:
-
Oleksij Rempel authored
Disable BH around the call to napi_schedule() to avoid following error: NOHZ tick-stop error: local softirq work is pending, handler #08!!! Fixes: ec4c7e12 ("lan78xx: Introduce NAPI polling support") Signed-off-by:
-
Kurt Kanzenbach authored
Currently using plain XDP/ZC sockets on stmmac results in a kernel crash: |[ 255.822584] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 |[...] |[ 255.822764] Call trace: |[ 255.822766] stmmac_tx_clean.constprop.0+0x848/0xc38 The program counter indicates xsk_tx_metadata_complete(). It works on compl->tx_timestamp, which is not set by xsk_tx_metadata_to_compl() due to missing meta data. Therefore, call xsk_tx_metadata_complete() only when meta data is actually used. Tested on imx93 without XDP, with XDP and with XDP/ZC. Fixes: 1347b419 ("net: stmmac: Add Tx HWTS support to XDP ZC") Suggested-by:
Serge Semin <fancer.lancer@gmail.com> Tested-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20240222-stmmac_xdp-v2-1-4beee3a037e4@linutronix.deSigned-off-by:
-
Javier Carrasco authored
The MII code does not check the return value of mdio_read (among others), and therefore no error code should be sent. A previous fix to the use of an uninitialized variable propagates negative error codes, that might lead to wrong operations by the MII library. An example of such issues is the use of mii_nway_restart by the dm9601 driver. The mii_nway_restart function does not check the value returned by mdio_read, which in this case might be a negative number which could contain the exact bit the function checks (BMCR_ANENABLE = 0x1000). Return zero in case of error, as it is common practice in users of mdio_read to avoid wrong uses of the return value. Fixes: 8f8abb86 ("net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read") Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by:
Peter Korsgaard <peter@korsgaard.com> Link: https://lore.kernel.org/r/20240225-dm9601_ret_err-v1-1-02c1d959ea59@gmail.comSigned-off-by:
-
- 27 Feb, 2024 18 commits
-
-
Jakub Kicinski authored
struct veth_rq is pretty large, 832B total without debug options enabled. Since commit under Fixes we try to pre-allocate enough queues for every possible CPU. Miao Wang reports that this may lead to order-5 allocations which will fail in production. Let the allocation fallback to vmalloc() and try harder. These are the same flags we pass to netdev queue allocation. Reported-and-tested-by:
Miao Wang <shankerwangmiao@gmail.com> Fixes: 9d3684c2 ("veth: create by default nr_possible_cpus queues") Link: https://lore.kernel.org/all/5F52CAE2-2FB7-4712-95F1-3312FBBFA8DD@gmail.com/Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240223235908.693010-1-kuba@kernel.orgSigned-off-by:
-
Paolo Abeni authored
Shannon Nelson says: ==================== ionic: PCI error handling fixes These are a few things to make our PCI reset handling better. ==================== Link: https://lore.kernel.org/r/20240223222742.13923-1-shannon.nelson@amd.comSigned-off-by:
-
Shannon Nelson authored
When rebuilding the lif after an FLR, be sure to restore the current netdev features, not do the usual first time feature init. This prevents losing user changes to things like TSO or vlan tagging states. Fixes: 45b84188 ("ionic: keep filters across FLR") Reviewed-by:
Brett Creeley <brett.creeley@amd.com> Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Signed-off-by:
-
Shannon Nelson authored
Since we now have potential cases of NULL cmd_regs and info_regs during a reset recovery, and left NULL if a reset recovery has failed, we need to check that they exist before we use them. Most of the cases were covered in the original patch where we verify before doing the ioreadb() for health or cmd status. However, we need to protect a few uses of io mem that could be hit in error recovery or asynchronous threads calls as well (e.g. ethtool or devlink handlers). Fixes: 219e1832 ("ionic: no fw read when PCI reset failed") Reviewed-by:
-
Shannon Nelson authored
AER recovery handler can trigger a PCI Reset after tearing down the device setup in the error detection handler. The PCI Reset handler will also attempt to tear down the device setup, and this second tear down needs to know that it doesn't need to call pci_release_regions() a second time. We can clear num_bars on tear down and use that to decide later if we need to clear the resources. This prevents a harmless but disturbing warning message resource: Trying to free nonexistent resource <0xXXXXXXXXXX-0xXXXXXXXXXX> Fixes: c3a910e1 ("ionic: fill out pci error handlers") Reviewed-by: -
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: more misc. fixes for v6.8 This series includes 6 types of fixes: - Patch 1 fixes v4 mapped in v6 addresses support for the userspace PM, when asking to delete a subflow. It was done everywhere else, but not there. Patch 2 validates the modification, thanks to a subtest in mptcp_join.sh. These patches can be backported up to v5.19. - Patch 3 is a small fix for a recent bug-fix patch, just to avoid printing an irrelevant warning (pr_warn()) once. It can be backported up to v5.6, alongside the bug-fix that has been introduced in the v6.8-rc5. - Patches 4 to 6 are fixes for bugs found by Paolo while working on TCP_NOTSENT_LOWAT support for MPTCP. These fixes can improve the performances in some cases. Patches can be backported up to v5.6, v5.11 and v6.7 respectively. - Patch 7 makes sure 'ss -M' is available when starting MPTCP Join selftest as it is required for some subtests since v5.18. - Patch 8 fixes a possible double-free on socket dismantle. The issue always existed, but was unnoticed because it was not causing any problem so far. This fix can be backported up to v5.6. - Patch 9 is a fix for a very recent patch causing lockdep warnings in subflow diag. The patch causing the regression -- which fixes another issue present since v5.7 -- should be part of the future v6.8-rc6. Patch 10 validates the modification, thanks to a new subtest in diag.sh. ==================== Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-0-162e87e48497@kernel.orgSigned-off-by:
-
Paolo Abeni authored
The mptcp diag interface already experienced a few locking bugs that lockdep and appropriate coverage have detected in advance. Let's add a test-case triggering the relevant code path, to prevent similar issues in the future. Be careful to cope with very slow environments. Note that we don't need an explicit timeout on the mptcp_connect subprocess to cope with eventual bug/hang-up as the final cleanup terminating the child processes will take care of that. Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by:
-
Paolo Abeni authored
Syzbot and Eric reported a lockdep splat in the subflow diag: WARNING: possible circular locking dependency detected 6.8.0-rc4-syzkaller-00212-g40b9385d #0 Not tainted syz-executor.2/24141 is trying to acquire lock: ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline] ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137 but task is already holding lock: ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: inet_diag_dump_icsk+0x39f/0x1f80 net/ipv4/inet_diag.c:1038 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&h->lhash2[i].lock){+.+.}-{2:2}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __inet_hash+0x335/0xbe0 net/ipv4/inet_hashtables.c:743 inet_csk_listen_start+0x23a/0x320 net/ipv4/inet_connection_sock.c:1261 __inet_listen_sk+0x2a2/0x770 net/ipv4/af_inet.c:217 inet_listen+0xa3/0x110 net/ipv4/af_inet.c:239 rds_tcp_listen_init+0x3fd/0x5a0 net/rds/tcp_listen.c:316 rds_tcp_init_net+0x141/0x320 net/rds/tcp.c:577 ops_init+0x352/0x610 net/core/net_namespace.c:136 __register_pernet_operations net/core/net_namespace.c:1214 [inline] register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1283 register_pernet_device+0x33/0x80 net/core/net_namespace.c:1370 rds_tcp_init+0x62/0xd0 net/rds/tcp.c:735 do_one_initcall+0x238/0x830 init/main.c:1236 do_initcall_level+0x157/0x210 init/main.c:1298 do_initcalls+0x3f/0x80 init/main.c:1314 kernel_init_freeable+0x42f/0x5d0 init/main.c:1551 kernel_init+0x1d/0x2a0 init/main.c:1441 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242 -> #0 (k-sk_lock-AF_INET6){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 lock_sock_fast include/net/sock.h:1723 [inline] subflow_get_info+0x166/0xd20 net/mptcp/diag.c:28 tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline] tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137 inet_sk_diag_fill+0x10ed/0x1e00 net/ipv4/inet_diag.c:345 inet_diag_dump_icsk+0x55b/0x1f80 net/ipv4/inet_diag.c:1061 __inet_diag_dump+0x211/0x3a0 net/ipv4/inet_diag.c:1263 inet_diag_dump_compat+0x1c1/0x2d0 net/ipv4/inet_diag.c:1371 netlink_dump+0x59b/0xc80 net/netlink/af_netlink.c:2264 __netlink_dump_start+0x5df/0x790 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:338 [inline] inet_diag_rcv_msg_compat+0x209/0x4c0 net/ipv4/inet_diag.c:1405 sock_diag_rcv_msg+0xe7/0x410 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 As noted by Eric we can break the lock dependency chain avoid dumping any extended info for the mptcp subflow listener: nothing actually useful is presented there. Fixes: b8adb69a ("mptcp: fix lockless access in subflow ULP diag") Cc: stable@vger.kernel.org Reported-by:
-
Davide Caratti authored
when MPTCP server accepts an incoming connection, it clones its listener socket. However, the pointer to 'inet_opt' for the new socket has the same value as the original one: as a consequence, on program exit it's possible to observe the following splat: BUG: KASAN: double-free in inet_sock_destruct+0x54f/0x8b0 Free of addr ffff888485950880 by task swapper/25/0 CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Not tainted 6.8.0-rc1+ #609 Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013 Call Trace: <IRQ> dump_stack_lvl+0x32/0x50 print_report+0xca/0x620 kasan_report_invalid_free+0x64/0x90 __kasan_slab_free+0x1aa/0x1f0 kfree+0xed/0x2e0 inet_sock_destruct+0x54f/0x8b0 __sk_destruct+0x48/0x5b0 rcu_do_batch+0x34e/0xd90 rcu_core+0x559/0xac0 __do_softirq+0x183/0x5a4 irq_exit_rcu+0x12d/0x170 sysvec_apic_timer_interrupt+0x6b/0x80 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x16/0x20 RIP: 0010:cpuidle_enter_state+0x175/0x300 Code: 30 00 0f 84 1f 01 00 00 83 e8 01 83 f8 ff 75 e5 48 83 c4 18 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc fb 45 85 ed <0f> 89 60 ff ff ff 48 c1 e5 06 48 c7 43 18 00 00 00 00 48 83 44 2b RSP: 0018:ffff888481cf7d90 EFLAGS: 00000202 RAX: 0000000000000000 RBX: ffff88887facddc8 RCX: 0000000000000000 RDX: 1ffff1110ff588b1 RSI: 0000000000000019 RDI: ffff88887fac4588 RBP: 0000000000000004 R08: 0000000000000002 R09: 0000000000043080 R10: 0009b02ea273363f R11: ffff88887fabf42b R12: ffffffff932592e0 R13: 0000000000000004 R14: 0000000000000000 R15: 00000022c880ec80 cpuidle_enter+0x4a/0xa0 do_idle+0x310/0x410 cpu_startup_entry+0x51/0x60 start_secondary+0x211/0x270 secondary_startup_64_no_verify+0x184/0x18b </TASK> Allocated by task 6853: kasan_save_stack+0x1c/0x40 kasan_save_track+0x10/0x30 __kasan_kmalloc+0xa6/0xb0 __kmalloc+0x1eb/0x450 cipso_v4_sock_setattr+0x96/0x360 netlbl_sock_setattr+0x132/0x1f0 selinux_netlbl_socket_post_create+0x6c/0x110 selinux_socket_post_create+0x37b/0x7f0 security_socket_post_create+0x63/0xb0 __sock_create+0x305/0x450 __sys_socket_create.part.23+0xbd/0x130 __sys_socket+0x37/0xb0 __x64_sys_socket+0x6f/0xb0 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Freed by task 6858: kasan_save_stack+0x1c/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x12c/0x1f0 kfree+0xed/0x2e0 inet_sock_destruct+0x54f/0x8b0 __sk_destruct+0x48/0x5b0 subflow_ulp_release+0x1f0/0x250 tcp_cleanup_ulp+0x6e/0x110 tcp_v4_destroy_sock+0x5a/0x3a0 inet_csk_destroy_sock+0x135/0x390 tcp_fin+0x416/0x5c0 tcp_data_queue+0x1bc8/0x4310 tcp_rcv_state_process+0x15a3/0x47b0 tcp_v4_do_rcv+0x2c1/0x990 tcp_v4_rcv+0x41fb/0x5ed0 ip_protocol_deliver_rcu+0x6d/0x9f0 ip_local_deliver_finish+0x278/0x360 ip_local_deliver+0x182/0x2c0 ip_rcv+0xb5/0x1c0 __netif_receive_skb_one_core+0x16e/0x1b0 process_backlog+0x1e3/0x650 __napi_poll+0xa6/0x500 net_rx_action+0x740/0xbb0 __do_softirq+0x183/0x5a4 The buggy address belongs to the object at ffff888485950880 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes inside of 64-byte region [ffff888485950880, ffff8884859508c0) The buggy address belongs to the physical page: page:0000000056d1e95e refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888485950700 pfn:0x485950 flags: 0x57ffffc0000800(slab|node=1|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0057ffffc0000800 ffff88810004c640 ffffea00121b8ac0 dead000000000006 raw: ffff888485950700 0000000000200019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888485950780: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff888485950800: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff888485950880: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffff888485950900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff888485950980: 00 00 00 00 00 01 fc fc fc fc fc fc fc fc fc fc Something similar (a refcount underflow) happens with CALIPSO/IPv6. Fix this by duplicating IP / IPv6 options after clone, so that ip{,6}_sock_destruct() doesn't end up freeing the same memory area twice. Fixes: cf7da0d6 ("mptcp: Create SUBFLOW socket for incoming connections") Cc: stable@vger.kernel.org Signed-off-by:Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
-
Geliang Tang authored
Commands 'ss -M' are used in script mptcp_join.sh to display only MPTCP sockets. So it must be checked if ss tool supports MPTCP in this script. Fixes: e274f715 ("selftests: mptcp: add subflow limits test-cases") Cc: stable@vger.kernel.org Signed-off-by:
Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by:
-
Paolo Abeni authored
After the blamed commit below, the send buffer auto-tuning can happen after that the mptcp_propagate_sndbuf() completes - via the delegated action infrastructure. We must check for write space even after such change or we risk missing the wake-up event. Fixes: 8005184f ("mptcp: refactor sndbuf auto-tuning") Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Abeni authored
Such value should be inherited from the first subflow, but passive sockets always used 'rsk_rcv_wnd'. Fixes: 6f8a612a ("mptcp: keep track of advertised windows right edge") Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Abeni authored
when inserting not contiguous data in the subflow write queue, the protocol creates a new skb and prevent the TCP stack from merging it later with already queued skbs by setting the EOR marker. Still no push flag is explicitly set at the end of previous GSO packet, making the aggregation on the receiver side sub-optimal - and packetdrill self-tests less predictable. Explicitly mark the end of not contiguous DSS with the push flag. Fixes: 6d0060f6 ("mptcp: Write MPTCP DSS headers to outgoing data packets") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts (NGI0) authored
After the 'Fixes' commit mentioned below, the client side might print the following warning once when a subflow is fully established at the reception of any valid additional ack: MPTCP: bogus mpc option on established client sk That's a normal situation, and no warning should be printed for that. We can then skip the check when the label is used. Fixes: e4a0fa47 ("mptcp: corner case locking for rx path fields initialization") Cc: stable@vger.kernel.org Suggested-by:
-
Geliang Tang authored
Now both a v4 address and a v4-mapped address are supported when destroying a userspace pm subflow, this patch adds a second subflow to "userspace pm add & remove address" test, and two subflows could be removed two different ways, one with the v4mapped and one with v4. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387 Fixes: 48d73f60 ("selftests: mptcp: update userspace pm addr tests") Cc: stable@vger.kernel.org Signed-off-by:
-
Geliang Tang authored
Address family of server side mismatches with that of client side, like in "userspace pm add & remove address" test: userspace_pm_add_addr $ns1 10.0.2.1 10 userspace_pm_rm_sf $ns1 "::ffff:10.0.2.1" $SUB_ESTABLISHED That's because on the server side, the family is set to AF_INET6 and the v4 address is mapped in a v6 one. This patch fixes this issue. In mptcp_pm_nl_subflow_destroy_doit(), before checking local address family with remote address family, map an IPv4 address to an IPv6 address if the pair is a v4-mapped address. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387 Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment") Cc: stable@vger.kernel.org Signed-off-by: -
Eric Dumazet authored
This fixes a possible UAF in if_nlmsg_size(), which can run without RTNL. Add rcu protection to "struct dpll_pin" Move netdev_dpll_pin() from netdevice.h to dpll.h to decrease name pollution. Note: This looks possible to no longer acquire RTNL in netdev_dpll_pin_assign() later in net-next. v2: do not force rcu_read_lock() in rtnl_dpll_pin_size() (Jiri Pirko) Fixes: 5f184269 ("netdev: expose DPLL pin handle for netdevice") Signed-off-by:
-
Oleksij Rempel authored
Same as LAN7800, LAN7850 can be used without EEPROM. If EEPROM is not present or not flashed, LAN7850 will fail to sync the speed detected by the PHY with the MAC. In case link speed is 100Mbit, it will accidentally work, otherwise no data can be transferred. Better way would be to implement link_up callback, or set auto speed configuration unconditionally. But this changes would be more intrusive. So, for now, set it only if no EEPROM is found. Fixes: e69647a1 ("lan78xx: Set ASD in MAC_CR when EEE is enabled.") Signed-off-by:
-
- 26 Feb, 2024 1 commit
-
-
Eric Dumazet authored
It seems that if userspace provides a correct IFA_TARGET_NETNSID value but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr() returns -EINVAL with an elevated "struct net" refcount. Fixes: 6ecf4c37 ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR") Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
