- 18 Apr, 2017 1 commit
-
-
Dan Carpenter authored
It's not possible for endpoint to be zero so the test doesn't work. If we break on the first iteration through the loop then endpoint is 1 and "ret" is uninitialized. Fixes: ebc94461 ("drm: convert drivers to use drm_of_find_panel_or_bridge") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170415192142.GA6416@mwanda
-
- 13 Apr, 2017 2 commits
-
-
Vincent Abriou authored
On stih407-410 chip family the GDP layers are able to support up to UHD resolution (3840 x 2160). Signed-off-by:
Vincent Abriou <vincent.abriou@st.com> Acked-by:
Lee Jones <lee.jones@linaro.org> Tested-by:
-
Vincent Abriou authored
drm/sti driver is now part of drm-misc as a small driver. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/1491835958-30229-1-git-send-email-vincent.abriou@st.com
-
- 12 Apr, 2017 1 commit
-
-
Daniel Vetter authored
Yet again I've proven that I can't negate conditions :( Testcase: igt/kms_properties/get_property-sanity Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Fixes: eb8eb02e ("drm: Drop modeset_lock_all from the getproperty ioctl") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170410115445.13829-1-daniel.vetter@ffwll.ch
-
- 10 Apr, 2017 1 commit
-
-
Romain Perier authored
This helper is supposed to validate or reject the modeline before it applied by the mode setting. Currently this function has been dropped, it was previously set to a dummy function that always returned true. For both cases, this means that userspace can ask for a bad modeline that will be always accepted. On some platforms, like Rockchip, the drm dw_hdmi-rockchip variant driver already implements the atomic_check drm helper, so mode_fixup cannot be handled and implemented there (as drm_atomic_helper relies on either atomic_check or mode_fixup). This commit implements this helper. It only checks that this mode is correct from the connector point of view. Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Romain Perier <romain.perier@collabora.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170407121743.4142-1-romain.perier@collabora.com
-
- 07 Apr, 2017 17 commits
-
-
Sean Paul authored
This reverts commit b8dfa821 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Apr 7 12:17:12 2017 +0100 drm: Don't allow interruptions when opening debugfs/crc It reportedly breaks things, so let's revert now and try again later. Fixes: b8dfa821 ("drm: Don't allow interruptions when opening debugfs/crc") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Reported-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
-
Daniel Vetter authored
I thought I've fixed this, but maybe not. Anyway, clearly broken, and easy fix. Cc: Tony Lindgren <tony@atomide.com> Reported-by:
Tony Lindgren <tony@atomide.com> Fixes: b95ff031 ("drm: Remove drm_modeset_(un)lock_crtc") Cc: Harry Wentland <harry.wentland@amd.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
-
Daniel Vetter authored
I've broken this by removing the backoff handling from the set_config2atomic helper in commit 38b6441e Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Mar 22 22:50:58 2017 +0100 drm/atomic-helper: Remove the backoff hack from set_config Fixing this properly would mean we get to wire the acquire_ctx all the way through vmwgfx fbdev code, and doing the same was tricky for the shared fbdev layer. Probably much better to look into refactoring the entire code to use the helpers, but since that's not a viable long-term solution fix the issue by open-coding a vmwgfx version of set_config, that does the legacy backoff dance internally. Note: Just compile-tested. The idea is to take drm_mode_set_config_internal(), remove the "is this a legacy driver" check, and whack the drm_atomic_legacy_backoff trickery at the end. Since drm_atomic_legacy_backoff is for atomic commits only we need to open-code it. Cc: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Jeffy Chen authored
Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
-
Jeffy Chen authored
Current drm bind/unbind sequence would cause some memory issues. For example we should not cleanup iommu before cleanup mode config. Reorder bind/unbind sequence, follow exynos drm. Signed-off-by:
-
Jeffy Chen authored
The clock is enabled when binding cdn dp. Signed-off-by:
-
Jeffy Chen authored
The clocks are prepared when binding vop. Signed-off-by:
-
Jeffy Chen authored
We're trying to access vop registers here, so need to make sure the pm domain is on. Normally it should be enabled by the bootloader, but there's no guarantee of it. And if we wanna do unbind/bind, it would also cause the device to hang. And this patch also does these: 1/ move vop_initial to the end of vop_bind for eaiser error handling. 2/ correct the err_put_pm_runtime of vop_enable. Signed-off-by:
-
Jeffy Chen authored
After snd_soc_unregister_codec, the dai link would remain bound to the invalid codec. That would cause crashes after unbind dp driver. Let's unregister audio codec when removing dp driver to prevent that. Signed-off-by:
-
Jeffy Chen authored
Signed-off-by:
-
Jeffy Chen authored
Normally we do this in drm_mode_config_cleanup. But: 1/ analogix dp's connector is allocated in bind, and freed after unbind. So we need to destroy it in unbind to avoid further access. 2/ the drm bridge is attached in bind, and detached in encoder cleanup. So we need to destroy encoder in unbind. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Jeffy Chen authored
The clock is enabled when binding analogix dp. Signed-off-by:
-
Jeffy Chen authored
The dp aux is registered when binding analogix dp. Signed-off-by:
-
Jeffy Chen authored
The panel is attached when binding analogix dp. Signed-off-by:
-
Chris Wilson authored
The code does not like to be interrupted when waiting for the first vblank after opening a debugfs/crc channel, so don't. [66285.716870] WARNING: CPU: 1 PID: 16615 at drivers/gpu/drm/drm_debugfs_crc.c:185 crtc_crc_open+0x1d0/0x1f0 [drm] [66285.716877] Modules linked in: i915 intel_powerclamp crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel cryptd intel_gtt i2c_algo_bit lpc_ich mfd_core drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers drm video button autofs4 sd_mod ahci libahci libata i2c_i801 scsi_mod i2c_designware_platform i2c_designware_core i2c_core [66285.716929] CPU: 1 PID: 16615 Comm: kms_frontbuffer Not tainted 4.11.0-rc5+ #7 [66285.716935] Hardware name: GIGABYTE GB-BXBT-1900/MZBAYAB-00, BIOS F8 03/02/2016 [66285.716941] Call Trace: [66285.716955] dump_stack+0x4d/0x6f [66285.716966] __warn+0xc1/0xe0 [66285.716975] warn_slowpath_null+0x18/0x20 [66285.717004] crtc_crc_open+0x1d0/0x1f0 [drm] [66285.717014] ? wake_atomic_t_function+0x50/0x50 [66285.717024] full_proxy_open+0xf0/0x1b0 [66285.717032] ? full_proxy_release+0x80/0x80 [66285.717042] do_dentry_open.isra.17+0x14b/0x2d0 [66285.717051] vfs_open+0x42/0x60 [66285.717064] path_openat+0x5e7/0x13d0 [66285.717074] ? refcount_dec_and_test+0x11/0x20 [66285.717081] ? down_read+0xd/0x30 [66285.717087] do_filp_open+0x85/0xf0 [66285.717093] ? __vfs_write+0x23/0x120 [66285.717100] ? __alloc_fd+0x3a/0x170 [66285.717107] do_sys_open+0x11e/0x1f0 [66285.717113] ? do_sys_open+0x11e/0x1f0 [66285.717119] SyS_openat+0xf/0x20 [66285.717125] entry_SYSCALL_64_fastpath+0x17/0x98 [66285.717131] RIP: 0033:0x7f5f2235146a [66285.717135] RSP: 002b:00007ffd892e6bc0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 [66285.717142] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5f2235146a [66285.717147] RDX: 0000000000000000 RSI: 00007ffd892e6c40 RDI: 0000000000000006 [66285.717151] RBP: 00007ffd892e6b20 R08: 0000000000000000 R09: 000000000000000f [66285.717156] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 [66285.717161] R13: 00007ffd892e6b10 R14: 0000000000000004 R15: 00000000007e61f4 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100610 Fixes: e8fa5671 ("drm: crc: Wait for a frame before returning from open()") Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
-
Gerd Hoffmann authored
Reported-by:
李强 <liqiang6-s@360.cn> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170406155941.458-1-kraxel@redhat.com
-
Neil Armstrong authored
The plat_data->input_bus_format and plat_data->input_bus_encoding are unsigned long and are always >=0, but the value 0 was still considered as RGB888 for input_bus_format and default color space for input_bus_encoding in the reworked code. This patch changes the if statement check for a non-zero value to either use the default input bus_format and/or bus_encoding for a zero value and the provided bus_format and/or bus_encoding for a non zero value. Thanks to Dan Carpenter for his bug report at [1]. Tested on Amlogic P230 (with CSC enabled for YUV444 to RGB) and Rockchip RK3288 ACT8846 EVB Board (no CSC involved, direct RGB passthrough). [1] http://lkml.kernel.org/r/20170406052120.GA26578@mwanda Cc: Dan Carpenter <dan.carpenter@oracle.com> Fixes: def23aa7 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
-
- 06 Apr, 2017 18 commits
-
-
Rob Herring authored
The OMAP driver has its own OF graph helpers that are similar to the common helpers. This commit replaces most of the calls with the common helpers. There's still a couple of custom helpers left, but the driver needs more extensive changes to get rid of them. In dss_init_ports, we invert the loop, looping through the known ports and matching them to DT nodes rather than looping thru DT nodes and matching them to the ports. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Rob Herring authored
Similar to the previous commit, convert drivers open coding OF graph parsing to use drm_of_find_panel_or_bridge instead. This changes some error messages to debug messages (in the graph core). Graph connections are often "no connects" depending on the particular board, so we want to avoid spurious messages. Plus the kernel is not a DT validator. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> [seanpaul dropped rockchip changes since they're now obsolete] Signed-off-by:
-
Rob Herring authored
Convert drivers to use the new of_graph_get_remote_node() helper instead of parsing the endpoint node and then getting the remote device node. Now drivers can just specify the device node and which port/endpoint and get back the connected remote device node. The details of the graph binding are nicely abstracted into the core OF graph code. This changes some error messages to debug messages (in the graph core). Graph connections are often "no connects" depending on the particular board, so we want to avoid spurious messages. Plus the kernel is not a DT validator. Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Tested-by:
Eric Anholt <eric@anholt.net> Tested-by:
Jyri Sarha <jsarha@ti.com> Tested by: Archit Taneja <architt@codeaurora.org> Signed-off-by:
-
Rob Herring authored
Many drivers have a common pattern of searching the OF graph for either an attached panel or bridge and then finding the DRM struct for the panel or bridge. Also, most drivers need to handle deferred probing when the DRM device is not yet instantiated. Create a common function, drm_of_find_panel_or_bridge, to find the connected node and the associated DRM panel or bridge device. Signed-off-by:
-
Rob Herring authored
For drm_of_find_panel_or_bridge() added in the next commit, an empty version of of_drm_find_panel is needed for !CONFIG_DRM_PANEL. Signed-off-by:
-
Maarten Lankhorst authored
The atomic_check function is useful for implementing properties, but it can be used for other connector modeset related checks as well. Similar to plane check functions, on a modeset atomic_check() is always called. Changes since v1: - Make sure atomic_check() is called on any modeset. Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
Maarten Lankhorst authored
Now that handle_conflicting_encoders no longer touches active state, so there's no need to do the check quite that late any more. Doing it with all the other checks makes it a lot more clear what the below block tries to accomplish, and this feels like a better place to put the check. Signed-off-by:
-
Maarten Lankhorst authored
Now that handle_conflicting_encoders cannot disable crtc's any more it makes sense to set all the changed flags in 1 place. This makes the code slightly less magical. The (now removed) comment is out of date. The only reason the active_changed was set late was because handle_conflicting_encoders could disable connectors. This is no longer the case, and we can put everything in 1 place. Signed-off-by:
-
Maarten Lankhorst authored
Currently we use a flag to change behavior in atomic commit whether a conflicting encoder should be enabled or disabled. This is used for the legacy set_config helper, which disables connectors that have a conflicting encoder but not part of the active crtc list. There's no need for this to be handled in atomic commit, it could be done in the set_config helper instead. This will let the atomic check function reject any conflicting encoders, while set_config can disable conflicting crtc's. This makes it possible to recalculate the changed flags in 1 loop. Signed-off-by:
-
Daniel Vetter authored
Legacy drivers insist that we really take all the locks in this path, and the harm in doing so is minimal. v2: Like git add, it exists :( Fixes: 2ceb585a ("drm: Add explicit acquire ctx handling around ->set_config") Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: Alex Deucher <alexdeucher@gmail.com> Reported-by:
Alex Deucher <alexdeucher@gmail.com> Acked-and-tested-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Maarten Lankhorst authored
mode_valid() called from drm_helper_probe_single_connector_modes() may need to look at connector->state because what a valid mode is may depend on connector properties being set. For example some HDMI modes might be rejected when a connector property forces the connector into DVI mode. Some implementations of detect() already lock all state, so we have to pass an acquire_ctx to them to prevent a deadlock. This means changing the function signature of detect() slightly, and passing the acquire_ctx for locking multiple crtc's. For the callbacks, it will always be non-zero. To allow callers not to worry about this, drm_helper_probe_detect_ctx is added which might handle -EDEADLK for you. Changes since v1: - Always set ctx parameter. Changes since v2: - Always take connection_mutex when probing. Changes since v3: - Remove the ctx from intel_dp_long_pulse, and add WARN_ON(!connection_mutex) (danvet) - Update docs to clarify the locking situation. (danvet) Signed-off-by:
-
Laurent Vivier authored
When we use virtio-vga with a big-endian guest, the mouse pointer disappears. To fix that, on big-endian use DRM_FORMAT_BGRA8888 instead of DRM_FORMAT_ARGB8888. Signed-off-by:
Laurent Vivier <lvivier@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170405080915.823-1-lvivier@redhat.comSigned-off-by:
-
Dan Carpenter authored
There was supposed to be a break before the next case statement. Fixes: def23aa7 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by:
-
Neil Armstrong authored
Remove usused yet hdmi_bus_fmt_is_yuv420 function. Fixes: def23aa7 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491377579-9353-1-git-send-email-narmstrong@baylibre.com
-
Daniel Vetter authored
The goal is to push all the kms locking down into these separate _atomic and _legacy functions, so that we can correctly pass the acquire ctx into all atomic drivers. Instead of playing games with hidden ctx in mode_config.acquire_ctx. All the fbdev state will be protected by a new fbdev private lock that Thierry is working on. This here is just prep by creating a clean split between atomic and legacy paths, which also simplifies the control flow a bit. Reviewed-by:
-
Daniel Vetter authored
I got confused every time I audited what that lock_all is doing in there until realizing it's for legacy kms only. Make that a notch more obvious by having 2 entirely different paths. While at it also move the atomic version of this into drm_framebuffer.c, there's no reason it needs to be in drm_atomic.c. That way it becomes a simple static function. Reviewed-by:
-
Daniel Vetter authored
Another one knocked down. With this we can also remove the temporary hack in the gamma_set ioctl. Reviewed-by:
-
Daniel Vetter authored
Atomic helpers really want this instead of the hacked-up legacy backoff trick, which unfortunately prevents drivers from using their own private drm_modeset_locks. Aside: There's a few atomic drivers (nv50, vc4, soon vmwgfx) which don't yet use the new atomic color mgmt/gamma table stuff. Would be nice if they could switch over and just hook up drm_atomic_helper_legacy_gamma_set() instead. Cc: Dave Airlie <airlied@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
